ICal - Need Help With Multiple Calendars

Greetings All,
Is there an easy and fast way to merge multiple iCal calendars into one? I have probably close to 100 calendars all due to iTunes & Mobile Me syncing! Problem is with OS X Lion it doesn't seem to be straightforward! Any help would be hugely appreciated. My aim is to merge all of these into one and then sync this across two Macs, an iPhone and an iPad.
The only way I have found so far involves exporting each calendar one by one and this is just taking far too long to do.
Please help!!
Many Thanks,
Edmond

I want to get rid of the two arrays.
I simply joined these two arrays into one array and I select an array subset for the xy graph but that does not work.
Now the two data arrays get mixed again in the chart.
I can't see what is wrong. I have tried many things like indexing the array before the xy graph, directly wiring the array to the graph etc. nothing worked.
Please help.
Message Edited by johanneshoer on 10-14-2009 09:45 AM
Greetings Johannes
Using LabVIEW 7.1 and 2009 recently
Attachments:
Chart Test 9.vi ‏79 KB

Similar Messages

I need help with Sunbird Calendar, how can I transfer it from one computer to the other and to my iphone?

I installed Sunbird in one computer and my calendar has all my infos, events, and task that i would like to see on another computer that i just downloaded Sunbird into. Also, is it possible I can access Sunbird on my iphone?
Thank you in advance,

Try the forum here - http://forums.mozillazine.org/viewforum.php?f=46 - for help with Sunbird, this forum is for Firefox support.

Need HELP with a Calendar problem

When family members were having trouble accessing a recently published calendar, I tested the "subscribe" link for the calendar; I clicked on the link. That action made me a subscriber to my own calendar and now I cannot update or manage that calendar. (what was I thinking???)
How do I unsubscribe? I cannot unpublish, or take any other action with this calendar.
Any one have any ideas?
Thanks.
Maxine

Thanks; Found my answer

Need help with multiple accounts

I forgot my original password for my itunes account. Stupidly, i set up another one. Now I can't play my songs from my original account because I hace to put in that password. Tried reseting the password, but the email address from that account has been deactivated, so when it says" will sennd to email address on file, I can't retrive the email to rest the password. Is there a way to merge both accounts?

No. You cannot merge the accounts. Sorry.
You can try contacting itunes support for help with your password.

STILL NEED help with MULTIPLE COMPUTER usage

please please... it wont let me transfer songs from this 2nd computer to the ipod... PLEASE... i already set it to manual and it still wont work!

See this.
Using iPod with multiple computers.
If you don't understand how manual transfer works, see this also.
Manual transfer.

Need help with multiple devices and apple id

Between my husband and myself, we have two Iphones, two Ipads, and one Imac. I back all of them up on my Imac using ONE iTunes account....we prefer not use Icloud, and I think that helps keep the information on each device relatively separate from each other...no overlaps with contacts and calendars. We have one APPLE id and password, that we use for Itunes and the App Store. We just got the Iphone 6 for my husband, and it keeps asking him to enter his Icloud PW.(his recognized user name is his PRIMARY email address)...which presumably he does not have, nor does he need (or maybe he does I need some real guidance on that). To keep this from making him crazy can I just delete his Icloud account, which again presumably, was created automatically with the new Iphone 6 set up??
Similarly, I need to use FIND my Phone (etc), and HIS devices are not in MY listed devices....is this because he NEEDS his own APPLE ID, or is there a way to add his devices to my list of devices within the APP....I thought because we share the Itunes account they should all be in MY devices.
Can someone help me make sense of this?
THANKS!!

Hello melissaben6250,
Thank you for using Apple Support Communities.
I understand that you are not seeing your husbands new iPhone 6 in your Find My iPhone app. First, while you may "prefer not use iCloud", you are using it, at least in regards to Find My iPhone for your existing devices.
Now, for your husband's phone and Find My iPhone. It sounds like during the setup of his phone, he logged in to his Apple ID and even possibly created another iCloud account. In order to see his phone on your existing Find My iPhone, it will have to log in to the iCloud account where the other devices are signed in. Take a look at this article on troubleshooting Find My iPhone, especially the first section on the device not appearing.
iCloud: Troubleshooting Find My iPhone, iPad, iPod touch, or Mac - Apple Support
Cheers,
Jeff D.

Newbie needs help with multiple devices?

Hi and best wishes to all.
I could really use some advice on the following.
I purchased an iPhone and set it up on my PC in the normal way.
A few months later, my Creative Vision battery died, and Creative's only advice
was "buy a new one!". No chance Mr. Creative! If you call that customer care, I'm moving to Apple! So I purchased a 64Gb iPod Touch and installed that.
I must admit to a little difficulty trying to manage both devices in iTunes, but I'm also willing to admit that if I found the time to read the manuals, I'd probably get it right!
My main query is this:
I now use a second laptop when I'm away from my office and I want to mirror my main PC with my portable one, so that I can manage the iPhone and iPod on both machines.
Any advice on all of the above would be greatly appreciated.
Thaks in advance to all, and very best wishes!

rf4c wrote:
Hi and best wishes to all.
I could really use some advice on the following.
I must admit to a little difficulty trying to manage both devices in iTunes, but I'm also willing to admit that if I found the time to read the manuals, I'd probably get it right!
Reading manuals is so 20th century. Instead watch this helpful video, courtesy of The New York Times: Yo Jude: Many iPods; One Computer.
The question of mirroring the library on multiple machines is quite a bit more complicated. Take a look at this support article: iTunes 9: Understanding Home Sharing.

Need help with multiple users of a catalog

I run Lightroom in a small office and several of us have to have access to the image catalog, using Windows XP. To accomplish this, the images were placed on a shared external drive, the catalog was created on a USB flash drive and Lightroom was loaded on multiple computers. Everything has been fine and this strategy will work for us. However, when I move the catalog to another computer (logged on as a different user) the catalog appears with all keywords and image adjustments, but my import presets are not available. The preset files are located in the preset folder that accompanies the catalog, but they won't appear in the drop down box within Lightroom when attempting to import images. My temporary solution is to recreate the import presets, which I have done for one other user so far, but I don't want to have to do that for each new user. If one looks for the preset file, it is located in a folder called "user", but I have not figured out how to get Lightroom to recognize and use the preset files after logging on as a different user. When I move the catalog (USB flash drive) back to my computer (original computer, original user), then everything is fine again and I can see and use al the presets.
Anyone use Lightroom accross users or machines? Any way to get Lightroom to "see" and use import presets by multiple users?
Thanks for any help!

Not really sure if this will help or confuse things...
If each user has a preset folder/directory, could you not create a symlink that points to oen on the USB device? And then keep all the presets there?
Disclaimer: i have not tried this, nor looked at it much, just a thought as i was reading your post. If it doesn't apply, ignore me!
Cheers!

Need help with multiple iTunes files

i had iTunes songs/files on an old pc for years, backed up on an external hard drive. i then backed up that external drive with another newer external drive and hooked that newer drive to the mac. i then imported all songs onto the mac iTunes library.
now when i look at the song list in iTunes on the mac, there are three versions of every song - the first one will play but the next two versions give me the explanation point next to them and say they can't be found. HOW DO I ELIMINATE THE SECOND AND THIRD COPIES OF EACH SONG THAT CANNOT BE FOUND - TRYING TO CLEAN THINGS UP.
thanks

This technique should help you identify which entries need to be removed.
Lost & Found Playlists
Create a playlist called Found, select everything in Music and drag it into the Found playlist (it may take some time to count the tracks that are to be dropped). Create a smart playlist called Lost matching All the rules Playlist is Music and Playlist is not Found. Your lost tracks will be in this playlist. Cmd+A should select all and Option-Delete should delete them.
Or try Super Remove Dead Tracks.
tt2

Need Help with Multiple Airport Setup

I have the following hardware:
2- Airport Extreme (Simultaneous Dual-Band II)
1- Airport Extreme 802.11n (Fast Ethernet)
2- Airport Express 802.11n
Microcom EZ-BR2 802.11b/g Bridge Kit (the routers see this as just an ethernet cable connecting the two points)
Extras (old Airport Extreme Dome, Old Airport Express, D-Link DIR625)
I am host at a camp and retreat facility in a national forest. We have a satellite connection in our ball field on one end of the campus. The satellite line goes into a recreation building with the modem and Airport Extreme 802.11n (Fast Ethernet) router. The Microcom EZ-BR2 is plugged in to this on one end and connects to one of the Airport Extreme (Simultaneous Dual-Band II)'s in our main building office 800 feet away. The router in the office is set up as the main router for the wireless network, our Ooma phone & network printer are plugged in here. There is one Airport Express in this building giving internet access to a Power Mac G4 & old iMac. Up to this point everything works fine. My house is across the road from the office and has a pretty strong signal from the office router. I tried hooking up the other Airport Extreme (Simultaneous Dual-Band II) at home. If I set it up to extend the network the wireless works, but the Ethernet ports do not. If I set it up in bridge mode, the ethernet ports work but it doesn't extend the network, so I put the other Airport Express in bridge mode first to get internet in to the Extreme then made a new network for the house, If I keep it all the same network my Apple TV doesn't really work, with a second network our iphones and misc. devices keep getting kicked off the network "IP not valid", so I have to keep powering down to get everything working again. How should I set this up?

My house is across the road from the office and has a pretty strong signal from the office router. I tried hooking up the other Airport Extreme (Simultaneous Dual-Band II) at home. If I set it up to extend the network the wireless works, but the Ethernet ports do not.
To have the Ethernet port active, you would have to configure both the AEBSn in the office and the one you have in your house as an extended network ... with the office AEBSn configured for "Allow this network to be extended" and the house AEBSn configured for "Extend a wireless network."
The key here is that (most likely) you will not be able to extend the 5 GHz radio and possibly not the 2.4 GHz radio due to the range between the AirPorts. The higher frequency network typically has a usable range of 50-75 feet; the 2.4 GHz network, 100-150 feet. By "usable," I mean with sufficient bandwidth to be worth it.
You can test this by measuring the Signal & Noise values and calculating the resultant Signal-to-Noise Ratio (SNR). You will want the house AEBSn within a 25+dB range of the one in the office.
Let me know if you need further assistance on how to take these measurements.

Need help with multiple photographs in canvas- Hard Day's Night - Effect

I'm working on a music video for my son's 6th grade band and have taken a serious of photographs of each of the 4 band members in rapid sequence ala George Harrison in Hard Days Night when he is being photographed by the press and he changes his expression as the camera snaps away.
I have imported the photos {(jpg) 3.9 MB, frame size 3872 X 2592} in to Final Cut Express and have put each sequence of photos for each band member on the timeline on a different track. I then have tried to size each photo in the canvas so that they are equally spaced and even but I am having a difficult time setting them up as they don't seem to fit evenly in the canvas and need to be more square then rectangular to fit so that the photos don't move around and are stable. I have each photo changing on the beat of the music but since the photos them self keep moving - its ruining the effect I'm going for. Any suggestions on how to make this work would be appreciated.
Thanks
Karl

Hello, and welcome to the FCE Forum !
A couple of thoughts -
Have you tried using Piero's QuarterPIP filter? This may make the job easier to manage and may provide more consistency than you are getting by doing manual scaling & positioning of the photos.
You mentioned that the pictures need to be more square than rectangular. Your photos at the size indicated have a 1.49:1 aspect ratio; the 16:9 video frame has an aspect ratio of 1.78:1; the mismatch could be the reason things don't seem to fit exactly. If you are using a 1920x1080 sequence, try experimenting with 4 photos that are cropped & resized to 960x540 before you import them into FCE. (960x540 is 1/4 the size of the 1920x1080 full frame, with the correct x & y dimensions to make them consistent and exactly fill the complete video frame when 1 is placed in each quadrant of the frame.)

Need help with my calendar

I'm working on a calendar project, just a practise thingy to learn java. I borrowed bits of code here and there, and wrote a lot on my own. I've managed to patch together a piece of code that generates html code for the calendar and returns everything as a string.
This is it (the formatter seems to get a bit confused by the html, especially the "p" tags):
 AddToArray findEvent = new AddToArray(publicArraylist);
 String tableCells(Calendar thisMonth)
 publicArraylist.add(new String[] {"Meet Nicolas!", "2006.03.15", "20:30", "This is the first record in the arraylist. It can't be empty (NullPointerException)."});
 StringBuffer returnValue = new StringBuffer();
 //** record the current value of the field Calendar.MONTH
 int iThisMonth = thisMonth.get(Calendar.MONTH);
 Calendar today = Calendar.getInstance(); //used to highlight today's date cell in the calendar
 Calendar endOfMonth = (Calendar)thisMonth.clone();
 endOfMonth.set(Calendar.DATE,endOfMonth.getActualMaximum(Calendar.DATE));
 endOfMonth.add(Calendar.DATE,7-endOfMonth.get(Calendar.DAY_OF_WEEK));
 //** set calendar to first day of the first week (may move back 1 month)
 thisMonth.add(Calendar.DATE,1-thisMonth.get(Calendar.DAY_OF_WEEK));
 do
 returnValue.append("<TR BORDER=1 VALIGN=TOP>");
 for (int i=0; i < 7; i++)
 returnValue.append("<TD HEIGHT=100 WIDTH=85");
 if (thisMonth.get(Calendar.MONTH) != iThisMonth) returnValue.append(" BGCOLOR=#e0e0e0"); // dark background for out-of-month days
 else if (dfDateField.format(thisMonth.getTime()).equals(dfDateField.format(today.getTime()))) returnValue.append(" BGCOLOR=#ffff00"); // yellow background for today's date
 else returnValue.append(" BGCOLOR=#ffffff"); // default white background
 returnValue.append(">" +
 dfDateField.format(thisMonth.getTime()) + ">" +
 "" + dfDayOfMonth.format(thisMonth.getTime()) + "");
 //### SEARCH FOR EVENTS OF THIS DAY AND THEN DISPLAY THEM ###
 returnValue.append("");
 String[] theEvent = new String[3];
 theEvent = findEvent.getEvent(thisMonth.getTime());
 if (theEvent[2] != null)
 returnValue.append(theEvent[2] + ":\n");
 returnValue.append("");
 returnValue.append(theEvent[0]);
 returnValue.append("");
 returnValue.append("");
 returnValue.append("");
 returnValue.append("</TD>");
 thisMonth.add(Calendar.DATE,1);
 returnValue.append("</TR>");
 while(thisMonth.getTime().before(endOfMonth.getTime()));
 //** restore date to first of this month:
 thisMonth.add(Calendar.MONTH,-1);
 thisMonth.set(Calendar.DATE,1);
 return returnValue.toString();
 }And here's the problem:
The beginning of the calendar won't show! Everything from and with the row which includes today. For example, if today is in the very beginning of the month, all of the calendar is shown. If today is one of the last days of the month, only the last row is shown. It is extremely frustrating, and I just can't seem to find the solution. I'd really appreciate of someone would like to take a look at it. Don't hesitate to ask questions about the coding, I'll be glad to try to explain anything (even I think the code is a mess).
Here are two screenshots to illustrate my problem. As you might notice, the output is slightly different than shown in the code. It no longer outputs "no events today" if there are no events to display. Also, there seems to have been a problem with the naming of the files. Naturally, the file called "w problems" is the one that shows the calendar without problems, and vice versa.
http://www.recap13.com/ANNAT/08_calendar_show_events_w_problems.jpg
http://www.recap13.com/ANNAT/09_calendar_show_events_wout_problems.jpg
Thanks in advance!

Thank you techberry, but I already tried that and I still can't sync it. Maybe I just scrambled everything up with the google mobile apps, bb desktop manager, bluetooth stuff and the BB desktop apps. I don't know but I am really frustrated because the calendar and appt sync with my work calendar was the main reason I bought it. If you think I can try the google apps will you please write back to me and walk me through the set-up for my calendar? I'll sing your praises.....
dbac1951

I need help with multiple text masks on one video.

Hi,
I am trying to get three different text masks to appear at different times on the same video. I seem to only be able to have one of the three words applied to the video at a time. For example when I copy paste another set of masks onto the video it deletes the last ones. What am I doing wrong? How can I make this work?
Thanks for any response!

It's pretty confusing, rto say the least. Masks would only be replaced, if the current masks are selected, which is totally intentional behavior. that aside, you workflow is clunky, to say the least. Simply duplicate the layer, trim the results as needed, apply the masks and animate the layer's opacity. Takes half the time than fiddling with animating mask opacity or otehr such things.
Mylenium

Need help with multiple links in one Flash file

Hi, I have to do a banner which is basically 4 different
slides that fade up and down, but the client wants each slide to
link to a different place when the user clicks on it. I know how to
create an invisible button to link the whole ad, but how would I
link each slide? Thanks in advance!

Am I getting no replies because this can't be done in Flash?
Is there a better way to do it? Actionscripts perhaps?
BTW, I'll have no access to the html page that the client
will be putting the swf file on so I wouldn't be able to put any
code around the file for linking, like if I did a bunch of jpg's
and found a script on the web somewhere that would fade them up and
down and link them. They want the linking built right into the swf,
is this even possible? Thanks in advance!

Help with multiple httpservice calls

I need help with multiple httpservice call back to back, doing 10 different mysql query at startup of the app loading results into 14 datagrids/combobox all queries are to different tables.

Hello,
I think what Grizzzzzzzzzz means is the following:
 <mx:HTTPService id="serviceOne"
 url="here goes url"
 result="resultHandler1(event);"
 fault="faultHandler(event);"/>
 <mx:HTTPService id="serviceTwo"
 url="here goes url"
 result="resultHandler2(event);"
 fault="faultHandler(event);"/>
 <mx:HTTPService id="serviceThree"
 url="here goes url"
 result="resultHandler3(event);"
 fault="faultHandler(event);"/>
 // Result handler 1
 private function resultHandler1(event:ResultEvent):void{
 //Here do something with the results
 xmlCollection = event.result as XML;
 //then call the next service
 serviceTwo.send();
 // Result handler 2
 private function resultHandler2(event:ResultEvent):void{
 //Here do something with the results
 xmlCollection = event.result as XML;
 //then call the next service
 serviceThree.send();
I hope this helps,
Pierre

ICal - Need Help With Multiple Calendars

Similar Messages

Maybe you are looking for