ICal not allowing update/missing all calenders

I switched on my computer today to add an event and found it would not allow me to add events, or to even shut down using the close button. I could quit via the finder, but that was the only way. I then tried syncing with my MobileMe account, that didn't work, so I told it to replace with my MM calender. No luck. I read earlier posts on problems after an earlier OS update and tossed the cashe and tried restarting. Now I have a blank calender without the ability to add data via Sync or manually. The File menu only shows 'Create new Fortunately both my laptop and iPhone are unaffected, but I'd sure like to get my desktop machine working right.
This computer and all other equipment has been shut down for 3 weeks while I was out of the country. I did an auto update yesterday after I got everything running again, but did not look at iCal until today. I also tried to 'Restore iCal" but nothing happened.

Lynda,
Go to MobileMe Support and select the appropriate country/language, then choose "Syncing with MobileMe." Next select "Troubleshooting MobileMe Sync Issues," and then select "Chat Now."
;~)

Similar Messages

I am getting the following error: Unable to authenticate the package: B_SPACE_NUTRITION.itmsp ERROR ITMS-9000: "OPS/ibooks.ncx(5): element "content" not allowed yet; missing required element "navLabel"" at Book (MZItmspBookPackage)

I am getting the following error when attempting to deliver my iBooks Author book package via iTunes Producer: "
Unable to authenticate the package: B_SPACE_NUTRITION.itmsp
ERROR ITMS-9000: "OPS/ibooks.ncx(5): element "content" not allowed yet; missing required element "navLabel"" at Book (MZItmspBookPackage)"
I understand that there's something wrong with the TOC file (.ncx), but I have tried everything and nothing seems to work. Every section of the TOC is labeled, so not sure why the navLabel issue is happenening.
Any help is GREATLY appreciated! Thank you.

Similar issues looks like. Are you using a template other than those in iBooks Author? That's what I did, and that was definitely part of the issue.
After digging through .ibooks code for hours and still not seeing the problem, I decided to reach out to one of the Apple epub conversion affiliates in iTunes Connect. They said they could repair the file without a problem, started working on it, only to come back a week later and say they couldn't work on .ibooks or .iba files yet.
So, in complete frustration, I decided to transfer my content page by page from the blank template I downloaded from a vendor online to one of the "textbook" templates in IBA. This was a long process as I had to unlock and clear out the formatting of the template. But, once that was done and content was transferred over, all was good. I submitted/delivered the same content and preview book within the new template and it went right through the first time (all metadata was exactly the same as well).
Now, the iBookstore approval waiting process begins!
Good luck!

My iPhone 5 is not allowing updating to the newest iOS version 6.1.3.

My iPhone 5 is not allowing updating to the newest iOS version 6.1.3. I missed doing the 6.1.2 update before 6.1.3 was available. It wants to install the 6.1.2 update, but, once I agree to the terms it tells me I can't because I am not connected to the Internet. It is connected to the net, as proved by surfing and iTunes, both by LTE and wireless. I have tried both a full shutdown as well as the most of the easy tricks to, like with apps updates, to get it to refresh. Has anyone had this issue since the 6.1.3 release, and is there an easy way to resolve the conflict.

The next iOS update won't change this.
Are you able to transfer anything else from your iTunes library and computer via the iTunes sync process such as a movie, TV show, podcast, audio or print book, apps, and photos from your computer?
What is selected under the Music tab for your iPhone sync preferences with iTunes.

Songs on the ipod "name of ipod" can not be updated because all of the play

Songs on the ipod "name of ipod" can not be updated because all of the playlist selected for updating no longer exist.
Everytime i try to update my iPod, I keep recieving this message. I have uninstalled and installed repeatly and i am still getting the same message, what can i do so that i can update my iPod.

Have a look at this post by forum member Hudgie: Hudgie - iPod cannot sync because one or more playlist is missing

HT4623 My old school iPod touch won't update. Does apple mess it's customers over by not allowing updates for older models of the touch? My last update is Ios5. My touch says its up to date. So has my old school touch reached its pinnacle?

My old school iPod touch won't update. Does apple mess it's customers over by not allowing updates for older models of the touch? My last update is Ios5. My touch says its up to date. So has my old school touch reached its pinnacle?

Correct. The 3G iPod does not have the hardware to support an iOS version higher than 5.1.1
To more easily find compatible apps:
iOSSearch - search the iTunes store for compatible apps.
Apple Club - filter apps by iOS version.
Starting when iOS 7 was releases, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
App Store: Downloading Older Versions of Apps on iOS - Apple Club
App Store: Install the latest compatible version of an app
You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

New Firefox 32 will not allow update to my plugins ,page keeps opening in new tab going round in circlesrenewing

new Firefox 32 will not allow update to my plugins ,page keeps opening in new tab going round in circlesrenewing

try to update manually or disable unnecessary plugins or upload screenshot images

How to open multiple artboard illustrator file in illustrator. Coz, whenever we open a multiple artboard file, illustrator provide an option to chose one artboard but does not allow opening of all artboards. Somebody may explain it

How to open multiple artboard illustrator file in illustrator. Coz, whenever we open a multiple artboard file, illustrator provide an option to chose one artboard but does not allow opening of all artboards. Somebody may explain it

Doug's got it right. It sounds like you are trying to open a later version file in an earlier version. This will always be handled as opening the PDF portion of the file. Try Googling AI_openMultiPagePDF for a script to open these or Resave from the newer version to the older.

I have a work Mac, an air book, a home Mac; husband has desktop and laptop. That makes 5. My work computer was replaced and I do not know what the company did with it. I am not allowed to deauthorize all. Any way around the year limit?

I have a work Mac, an air book, a home Mac; husband has desktop and laptop. That makes 5. My work computer was replaced and I do not know what the company did with it. I am not allowed to deauthorize all because I did this within the last year when I got my new airbook. Any way around the year limit? I don't know if I can find my old computer and I don't want to wait months to be able to play my ituens purchases on my new work computer.

If oyu already used up your "deauthorize all" option, you need to contact support so they can make an excemption:
http://www.apple.com/support/itunes/contact/

Server 2012 and 2012 R2 do not allow access to all 7 optical SAS drives?

The following problem occurs with Windows Server 2008 R2, 2012 and 2012 R2, Datacenter or Standard.
I have an external SAS enclosure with seven optical drives and one hot-swap SAS/SATA bay that connects using two SFF-8088 connectors (no internal SAS expander, etc.). The purpose is to use the seven bluray writers to write multiple copies of a large
database simultaneously. The optical drives are also occasionally used to read datasets that come on multiple discs (usually 8-12 per dataset and up to 15 datasets at a time). Because of the volume, more optical drives are definitely better.
Regardless of the type of SAS controller used to connect this enclosure, some significant functionality is always missing.
For writing, it is best to connect directly to the optical drives (which do their own buffering) so a HBA would seem better than a hardware RAID controller. I have tried several HBAs, including LSI-9211, LSI-9240-IT, Dell H310-IT. In all cases,
Windows only sees four DVD drives and the hot-swap bay. The drives Windows sees work perfectly for reading and writing. MegaRAID Storage Manager (LSI controller software) sees all seven optical drives and the hot-swap bay. LSI says this
must be a Windows problem. Strangely, if I remove (any) three optical drives and replace them with hot-swap bays, all eight devices are recognized by Windows.
If I use a true RAID controller (tried LSI-9260, Dell H800, Dell H810, HP 812P, IBM 5015), windows and MSM see all seven drives and the hot-swap bay, reads from the optical drives are fine, but writing large discs times out (presumably because of buffering
by the RAID card) so I can't write DVDs.
Is there a way to get Server to recognize all seven optical drives on an HBA? Ideally, I'd like to add several of these enclosures but I can't even get one working properly!
The system is a Tyan (Dell) MB with dual Xeon E5-2620s and 64Gb RDIMM. Currently includes LSI-9260 (2Tb SAS 10k in RAID 0), Dell H810 (32Tb SAS in RAID 6), and LSI-9211 (optical enclosure + 3Tb hot-swap). Just installed Server 2012 R2 Datacenter
for testing.
Any help would be greatly appreciated.

I've had the experience of working as a validation engineer for Intel, who at the time was developing a SAS/SATA storage controller chipset for thier new xeon processors. The chipset was included in their motherboard offerings. I validated the linux driver,
which is now included in the linux kernel as of the 3.x series kernel.
My first question is, what type of SAS enclosure are you using for your optical drives/hot swap bay? You will be surprised at how many enclosures don't actually provide a 100% direct-attached storage configuration, and instead opt to work as a mini expander
instead. In our validation, we tested several SAS enclosures, and we found several that even though they were advertised as direct-attached enclosures, by inspecting the data transmission with a SAS protocol analyzer we found communication over SMP (Serial
Management Protocol).
To ensure it is NOT the enclosure causing the anomaly, i'd connect the 7 optical drives directly to each storage controller unit (or sff-8087). These cards can support around 256 devices via expander attached configuration, as that is how many sas addresses
the scu's can support. Either way, they can only support a maximum of 8 devices direct-attached (4 per SCU). I would use a multi-line SFF-8087 SATA breakout cable to directly connect your optical drives to the HBA, 4 on SCU0 and the other 3 on SCU1.
I find it strange that LSI's storage manager can see all of the drives, but windows cannot. Since the SAS protocol allows for the ATAPI cmd set to be sent via scsi commands, the only thing I can think of is if windows can only recognize a certain amount
of SAS-addresses utilizing the ATAPI cmd set. Technically, it should only be limited by the number of devices the hba can support, and in either LSI thats 256. Otherwise the enclosure may be doing something funny with the initiator (SCU), where one initiator
may take precedence over the other. Again, testing a direct connection with a SFF-8087 SATA breakout cable will eliminate the enclosure as a factor.
I can understand from a developer perspective for the desire to have windows recognize the devices instead of relying on the lsi storage app. Firstly, that app is monstrous and unwieldy. Secondly, it does not allow for customized solutions/scripting to fully
access the optical devices, since you have to interact w/ lsi's storage mgr. 3rd, this should simply work if MS is fully compliant with the SAS protocol.
Finally, I want to make sure everyone is aware that a fully compliant 6G SAS compliant device will support SSP (Serial SCSI protocol), SMP (Serial Management Protocol), and STP (Sata Tunneling Protocol). STP basically defines how SATA devices can inter-operate
within the sas fabric by tunneling ATA commands via the SCSI cmd set. This is a basic functionality guaranteed within the overall SAS protocol; if your HBA supports SAS & SATA, it will support SSP, SMP, and STP frames (this is usually always listed on
the HBA), and therefore it will fully support SATA devices. A SAS device will support SSP & SMP. A SATA-only HBA will support the ATA cmd set only (and thus, cannot inter-operate within a SAS fabric).
Please note that at the very least, a direct-attached configuration should provide the number of Storage Controller Units x 4 fully working SATA devices (generally each internal SFF-8087 is a scu, most HBA's have a min of 2 SCU's, and 4 directly addressable
devices per SCU (8 direct attached devices total). Generally, any issues that will arise from SATA devices will be the result of expander-attached configurations. There are many points a SATA device can experience errors in a expander-attached configuration,
from the routing mechanism being utilized (table vs subtractive), to the type of expander being used (fan-out vs edge expander). Expanders will generally at least support 1 method of routing, if not both, and may or may not support multi-level configurations
(this is specifically dependent on the hba). It was not uncommon in our testing to come across expanders that would work great w/ SAS & SATA w/ 1 level expander, but fail to communicate with SATA devices past 2 or more levels. This falls on the responsibility
of the HBA, specifically the driver for the OS.
More Info on SATA Tunneling Protocol (STP):
http://www.serialstoragewire.net/Articles/2004_0225/developer_article_2_feb.html

Informatica checkout does not allow updates

I am using Informatica 7.9.6.1.
I checkout a Workflow and am trying to add a pre sql to the target table object to change the parallelism to 4. But the sql popup is dark grey and will not allow me to enter the sql.
It seems as if I am in readonly mode? I am using the same password Administrator that all others use, and they cannot update the sql either.
Any ideas on what to check to be able to modify sql or even add a sql override?
Thanks for the help!

I did get the presql to take on the workflow. I had to check out the workflow, then checkout the session from view history and checkout, then was able to update the session settings. In other environments, we had checkout turned off and simply could update all fields whether a workflow or session setting.
Thanks again

Nokia to NOT allow updates to Symbian apps

I dont know if anyone here has heard the news about the future of the Nokia / Ovi Store?
As of 1st Jan 2014 Nokia will not allow any new apps in the store, but even more worrying is the fact they wont allow updates for existing apps
This means that when facebook or youtube change the API's none of our apps will work and we will not be able to update them through the Nokia Store.
Im sure you realise the implications, basically all of our symbian / meego phones will be pretty much useless soon after January, maybe some 3rd party developers can issue updates via their own websites but who knows.......
And Nokia told us just recently that they would support symbian until 2016.
I have now lost all trust in Nokia

I am sure, in corporate board room, there was a calculation based on anticipated sales, device longevity, and projected move of customers to remaining platforms (WP8 and ASHA).
On paper I am sure those seemed sound to the people making the decisions.
In reality, they will greatly anger those of us who have stuck by Nokia and continue to use our well built symbian and Meego devices.
In reality, what ever minimal cost there is associated with allowing updates is greatly offset by the goodwill that it will generate by supporting legacy users.
A smart corporation would use this to their advantage. Put banner ads on the site with WP8 devices, smartly displayed, advertise the new features, new apps, aids to transition to the new devices so that everyone coming to get apps/updates for their aging phone would seem them. That way, you keep the goodwill of your current customers. And give them a reason to want and move towards your new WP8/ASHA phones. Wow do these people need to hire some good PR and ad people. Bean counters make financially sound and consumer stupid decisions.
Instead of using this to their advantage, they will make users progressively hate Nokia/MS. Eventually after January 1, Facebook or Twitter or some other services will change their API. Without the ability to fix the current app, it will be broken and remain broken. Now, every time you go to use it, you will think very bad things about Nokia and especially Microsoft. That is how the mind works. You will not think, "I need to buy a new lumia", you will think "I will never buy Nokia again" and will go buy iphone, android, jolla, firefox os..... any thing but Microsoft/Nokia who you perceived as harming you. That is just simple human nature and psychology.
But I am sure the corporate bean counters know better, right?
I will say honestly, when it comes time to replace my N9, I will look elsewhere. The sad part of all this is that prior to this announcement I still had positive feelings about Nokia and Microsoft. Those end January 1.

App store not allowing update

I bought Aperture 3 in the App Store and now it's not allowing me to upgrade. When I try, it gives me this dialog "To update this application, sign in to the account you used to purchase it."
The trouble is, I am in the only account that I have, and the one I used to purchase the application.
To complicate things I did have HDD trouble and updated the HDD by putting in the new HDD, installing Snow Leopard, upgrading to 10.6.8 and then using the migration assistant to move everything over from the old HDD.
Any suggestions would be appreciated.
Thanks,

I saw in another thread that this problem can be solved by quiting App store, deleating Aperture (The App only) and then restarting the App Store. Instead of "Update" it will now say "Install"
Install Aperture 3 again, start it up and it will find your prevoius Library, update it and all will be corrected. So far it seems to have worked;-)
Best to back up before this procedure, just in case....

Not allow updated into into master block forms6.0

In forms6.o, I created two block dept and emp in canvas1
I created one push button for commit purpose.Inside when-button-press,
I wrote the following code and I updated two block's emp and dept
and I hit the save button i need to update emp block only not dept block.
For this purpose i wrote the following code.But It's updating dept also.
How can avoide update in the dept block.
Thanks
Raghu.K
set_item_property('dept.deptno',ENABLED,property_false);
set_item_property('dept.deptno',NAVIGABLE,property_false);
set_item_property('dept.deptno',INSERT_ALLOWED,property_false);
set_item_property('dept.deptno',UPDATE_ALLOWED,property_false);
set_item_property('dept.dname',ENABLED,property_false);
set_item_property('dept.dname',NAVIGABLE,property_false);
set_item_property('dept.dname',INSERT_ALLOWED,property_false);
set_item_property('dept.dname',UPDATE_ALLOWED,property_false);
set_item_property('dept.loc',ENABLED,property_false);
set_item_property('dept.loc',NAVIGABLE,property_false);
set_item_property('dept.loc',INSERT_ALLOWED,property_false);
set_item_property('dept.loc',UPDATE_ALLOWED,property_false);
commit;
set_item_property('dept.deptno',ENABLED,property_true);
set_item_property('dept.deptno',NAVIGABLE,property_true);
set_item_property('dept.deptno',INSERT_ALLOWED,property_true);
set_item_property('dept.deptno',UPDATE_ALLOWED,property_true);
set_item_property('dept.dname',ENABLED,property_true);
set_item_property('dept.dname',NAVIGABLE,property_true);
set_item_property('dept.dname',INSERT_ALLOWED,property_true);
set_item_property('dept.dname',UPDATE_ALLOWED,property_true);
set_item_property('dept.loc',ENABLED,property_true);
set_item_property('dept.loc',NAVIGABLE,property_true);
set_item_property('dept.loc',INSERT_ALLOWED,property_true);
set_item_property('dept.loc',UPDATE_ALLOWED,property_true);

Hi,
If u set the block's update allowed property to false, it will not allow to update the data directly by user. But it will update the back end data. If u don't want to update the data in Dept block, write a trigger on-update in dept block and enter NULL; in that trigger. It won't update the dept block data. Try this.
Sudheer Babu

ITunes not allowing use of all free space allocated to music - 1Gen shuffle

I'm wondering why my iTunes won't allow me to completely fill the space on my 1st generation iPod shuffle that's been allocated to music. About 1.5 mb is reserved for other data, and the rest is for music, which is how I want it. But I can only ever fill about half of the storage space allocated to music, and there doesn't seem to be any way for me to alter this, as there's no slider on the storage bar - not that I should need it. I know I've been able to adjust this in the past on another computer, but I can't do it anymore; at least not on my current computer. The syncing will stop when it's half full, and if I try to manually drag songs to the iPod it'll just tell me there's no more room.

maybe half of your disk on your ipod shuffle is corrupt (meaning broken) or itunes is reserving more roomfor data than you think, but those are just guesses meaning I might not be right at all.

ITunes not allowing update to 4.2

I have a 3G on 4.1 (8B117) trying to update to 4.2, and iTunes is not allowing it. I'm running OS 10.4.11 and up-to-date iTunes 9.2.1 (5).
When my iPhone is connected, the iTunes phone summary tab shows that an update is available to 4.2 and to click Update, as I have always done in the past. When I do that, I get a pop-up window that says: "This version of iTunes (9.2.1) is the current version." It doesn't open the window to give the option to install now, download, etc., as usual.
I have tried re-launching iTunes and re-connecting the phone, but no change. Would anyone have a suggestion as to what, if anything I'm doing wrong, or what a possible solution might be available?
Thanks.

You need iTunes 10.1 or higher to install iOS 4.2.1. iTunes 10.1 or higher requires Leopard or Snow Leopard. You have no choice but to update your computer's OS.

ICal not allowing update/missing all calenders

Similar Messages

Maybe you are looking for