Ical not properly syncing with android device google calendar?

I have my iCal and my gmail account linked with for the calendars and address book. When I create an event with a specific time of day I can log on to google calendar from the internet and see the event exactly as I created it. When I look on my android phone which is also synced with google calendar it shows the event as all day no matter what I do in iCal. Any suggestions on what to do/ideas on why this is happening?

Thanks for posting this, JW --- I was about to post something similar because I'd entered some events for 11/7 last week in Entourage 2008 and noticed they were syncing an hour later on the iPhone and it was driving me crazy as I was thinking they would correct themselves (in iCal) once the time changed.
They didn't so I ended up deleting them off the phone and they managed to sync correctly from Entourage. Then I made some mods and noticed they had advanced up one hour again.
Maybe some DST patch is needed because technology probably still thinks time changes the last Saturday in October as I'm sure no one has thought to adjust this in programming?
I guess we have to wait and see....

Similar Messages

ITunes 11.1 does not properly sync with an iPad mini version 7.0

Hello everyone.
I am having difficulties using the "Podcasts" app on an iPad mini.
Having recently downloaded the newest version (11.1) of iTunes, I have realized that iTunes now believes that my iPad mini has 20.65 GB free, when it really only has 6.4 GB available (according to settings/general). The iPad mini is right because, there are many (over 100) podcasts which have not synced to iTunes. These podcasts can be accessed and listened to on the iPad mini.
This may be a device fault, as many of my podcasts have been coming up with "Download error. Tap to retry". This keeps approximately 1 in 10 podcasts in the downloads queue, but can still be listened to in full. Additionally, for approx. 1 in 5 podcasts, the "date released" tag that occurs underneath the name of the episode are set at the default 31 Dec 2000. This problem I can deal with, but the original problem keeps me from sharing episodes I have downloaded with other devices.
Additionally, my device occasionally requires several attempts to find the default wifi network. It recognises other wifi networks instantly, but the default one often doesn't display as an option to connect to for about 5-10 refreshes.
The second and third problem/symptom still occurred using the previous operating system. The first problem/symptom did not (to my knowledge) occur previously.
Does anyone have any input on this problem? I have tried google to search for the solution to this, but did not come up with anything.
Thanks for any advice
Luke

Hello everyone.
I am having difficulties using the "Podcasts" app on an iPad mini.
Having recently downloaded the newest version (11.1) of iTunes, I have realized that iTunes now believes that my iPad mini has 20.65 GB free, when it really only has 6.4 GB available (according to settings/general). The iPad mini is right because, there are many (over 100) podcasts which have not synced to iTunes. These podcasts can be accessed and listened to on the iPad mini.
This may be a device fault, as many of my podcasts have been coming up with "Download error. Tap to retry". This keeps approximately 1 in 10 podcasts in the downloads queue, but can still be listened to in full. Additionally, for approx. 1 in 5 podcasts, the "date released" tag that occurs underneath the name of the episode are set at the default 31 Dec 2000. This problem I can deal with, but the original problem keeps me from sharing episodes I have downloaded with other devices.
Additionally, my device occasionally requires several attempts to find the default wifi network. It recognises other wifi networks instantly, but the default one often doesn't display as an option to connect to for about 5-10 refreshes.
The second and third problem/symptom still occurred using the previous operating system. The first problem/symptom did not (to my knowledge) occur previously.
Does anyone have any input on this problem? I have tried google to search for the solution to this, but did not come up with anything.
Thanks for any advice
Luke

Steps to syncing with Nuevasync for google calendar

i was wondering if someone here could help me. i registered with nuevasync with my gmail address, then set up the thing on my phone. but it doesnt seem to be working, did i miss a step?
edit: i put the information from nuevasync in i get a message saying "unable to verify certificate, while automatically discovering account settings, the certificate from "gmail.com" could not be verified"
Message was edited by: Scala

Hi mapexvenus, I'm the owner of the company behind Nuevasync and I'm glad
the service is working for you. As an engineer, the whole 'these must be
bad guys selling our calendar data' thing has been both an education and
slightly perplexing. It hadn't even occurred to me that a) someone might
actually make a service like this with the intention of misusing folk's
data and b) that people would suspect that we would do so.
Anyway, the shiny new privacy policy has now been written, is in review
(e-mail our support alias if you'd like to review it) and should be posted
on the site real soon. We could have a debate about whether a privacy
policy gives you more privacy or less (from my perspective, reviewing
other sites' privacy policies in the process of writing ours, I really
wasn't sure about that), but quite a few people do seem to equate the
existence of said policy with enhanced privacy and we will shortly have
one.
We are a small company but our staff have a long history working for
well known and less well known 'real' Internet companies. I worked for
Netscape for example.
The last week and a half have been 'interesting' for us as we worked
to keep up with the load on the service and the large number of edge
case bugs that showed up once we had thousands of users' data syncing.
Things like privacy policy, terms of service, cool marketing material
on the site and a long list of other stuff have taken a lower priority
over ensuring reliable and correct sync service for our users.
This is something of an 'accidental empire' that we have here right now.
We started the service as a way to prove and test our sync protocol
software, which we expected to market to OEMs. We had no idea that the
iPhone 2.0 would ship with no good way to sync with Google, and that
as a result we would acquire thousands of users overnight. Hopefully
this explains some of the lack of the typical startup sparkle and pop.
Feel free to contact us if you have any questions.

TS3999 icloud is not pushing/syncing with my devices

I have (I think) set up icloud on my iphone 4 and my mac book pro and nothing is updating to each other
any suggestions?

I have (I think) set up icloud on my iphone 4 and my mac book pro and nothing is updating to each other
any suggestions?

IPod Classic will not properly sync

Hey everybody. I'm really hoping that somebody could help me out with this, as I am getting rather frustrated with it.
My iPod Classic 120GB will not properly sync with iTunes on Windows 7. When I plug my iPod into my computer, I get the typical "Scan & Fix" message from Windows, and I generally just close the window without selecting an option (to Scan & Fix or Ignore), as neither option has ever seemed to change anything.
I used to have over 100GB of music on my iPod, collected from various sources over the past 5 years or so, but a few months ago I plugged my iPod in to add new music to it, and iTunes did not recognize any of the files on my iPod. When I ejected it, there was no music on my iPod, but it still had 100GB of space filled. I decided to just bite the bullet and reformat my iPod, even though I would be losing most of my music, in hopes that I could make it work correctly.
However, after I reformatted it, I have continued to have problems. I have reformatted using both iTunes and the Windows reformatting tool. Every time I plug my iPod in to add new music, the same things happen. I'm not automatically syncing iTunes to my iPod, because I like to be able to manage my music manually. I can add some music to it, but certain files will not copy and then nothing alphabetically after those files will copy either. I eject my iPod and use it normally throughout the day, but then when I plug it back into my computer again to try to add the rest of my music, iTunes says that my iPod has no music on it (even though space is being used). When this happens, I just restore the iPod and try again, and this is getting extremely aggravating.
My music is all in MP3 format, and I am not trying to add movies, pictures, or any other files to my iPod (other than cover art). I have run anti-virus checks and stuff on all of my music files, and everything has come up clean. Should I try converting all of my music to AAC, or will this just take forever and not actually fix anything? I have already tried downgrading to an older version of iTunes, and I have still been having the same issues. I don't know what else I could do, and I really don't have the money to buy a new iPod.
Thanks in advance for any help or advice!

There may be some hardware fault on the iPod's hard drive, which is causing this problem. Your use of manual loading may be agravating the problem, because you are making the iPod apply many small incremental disk access updates. If you used automatic syncing, iTunes makes all changes at once, with one disk access, then dismounts the iPod's disk and spins down until the next sync, when it again makes all updates at once.
I understand why you want to use the manual method, but here's a way to "replicate" what you do manually using automatic syncing.
Create a new playlist in iTunes. Load this playlist with ALL the songs you want on the iPod.
Select the iPod in iTunes. There is a row of "tabs" (starting with Summary). Click on Music there. On the Music tab, set it to Sync music using Selected playlists, artists, albums, and genres. Below that, keep it simple by checkmarking ONLY that new playlist with the songs you want on the iPod. When you click Apply, the songs on that playlist sync to the iPod.
Going forward, to update the iPod's songs, just update that playlist (add and remove songs). Basically, instead of manually updating the iPod, you are manually updating the playlist. It's the same work, but with several key advantages:
- The iPod does not need to be connected to make updates, increasing flexibility and reducing wear-and-tear on iPod. Just connect the iPod once after you are done making all changes to the playlist.
- Updates to a playlist are instantaneous. Updates made directly to an iPod (especially one with a hard drive that may need to spin up) takes a few seconds to a few minutes, depending on data size. You're just waiting.
- Many small updates to the iPod's hard drive is more wear-and-tear, compared to iTunes applying all of your changes with one consolidated disk access.
- iTunes keeps the iPod's "disk" NOT mounted, except when syncing. This reduces wear-and-tear, and the chance of data corruption occuring. The manual method requires the iPod's disk to be mounted at all times (until ejected).
- Because the iPod's disk is not mounted most of the time, you don't need to eject before disconnecting.
- You have a backup of all of your iPod songs on the computer's hard drive.
- If you do a Restore, or if you get a new iPod, all you do is go to the Music tab and select that one playlist again, and click Apply. Everything back to the way it was before, with a few mouse clicks (and 20-30 minutes or so of syncing).
If you want multiple playlists on the iPod, just create those playlists in the iTunes library. Name them so that they all appear grouped together in the iTunes sidebar. Checkmark those playlists on the Music tab. Do your "song maintenance" in iTunes using those playlists, and let iTunes automatically sync all changes at once the next time you connect the iPod (or click the Sync button).
Try setting it up to use automatic syncing, to see if there is any improvement.

Published iCal will not sync with Palm device

I had been synching my iCal to my Palm device. I recently published my iCal calendar and To Do list on .Mac. Now I can no longer make changes to my calendar on iCal, nor can I see any To Do's. When I tried to sync my Palm device, all calendar and To Do items were deleated from the Palm. Can anyone help? I have now spent several hours trying to recreate my calendar and to do list. Needless to say, I am extremely frustrated and disappointed with the way the iCal publish function works. One solution might be to 'unpublish' the calendar, so that I can manage it from iCal on my mac again, but I can't find how to do that.
iMac Mac OS X (10.4.8)

Kim or Mike,
Welcome to Apple Discussions.
Before you do anything else, make sure that you use the iCal>File>Back up Database... feature.
In regard to recreating the calendar, if you open the web version of the calendar you can use the "Download" link on the web page to get the calendar on your desktop. Then use iCal to import the download: iCal>File>Import...
Then, after clicking on the published calendar in the source window, if you wish to Unpublish, use the iCal>Calendar>Unpublish... feature.
Since I do not use the Palm, I am unable to address that aspect of your question/problem.
;~)

My iPhone 4s screen is cracked and can't slide to unlock it. Several of the icons are not working as well. Is there a way to recover my photos if the phone has never had a back up or synced with another device?

My iPhone 4s screen is cracked (due to being dropped) and I can't slide to unlock it. Several of the the icons on screen will not work either. Is there a way to recover my photos if the phone has never had a back up and never been synced with another device?

kitts1979 wrote:
My iPhone 4s screen is cracked (due to being dropped) and I can't slide to unlock it. Several of the the icons on screen will not work either. Is there a way to recover my photos if the phone has never had a back up and never been synced with another device?
No in order to backup to iTunes, you would need to unlock your phone.
In order to import pics to your computer you would need to unlock your phone.

My photos will not sync to my Apple TV (1st generation), ipad, iphone, or itouch. They used to be there but upon recent syncs with all devices they have all gone. I am totally baffled as I have not changed settings?

My photos will not sync to my Apple TV (1st generation), ipad, iphone, or itouch. They used to be there but upon recent syncs with all devices they have all gone. I am totally baffled as I have not changed settings?

I had the same thing happen to me. It's a bug in iPhoto 9.4.2.
The first time you run iPhoto after upgrading to iPhoto 9.4.2, it "updates the iPhoto library". This sometimes tickles a bug where iTunes can see all your iPhoto albums, but iTunes thinks they are empty. Since iTunes thinks all your albums are empty, it dutifully deletes any photos from your synced iOS devices.
It's easy to tell if this is the problem you are seeing. Open iTunes and go to the photos sync panel for one of your iOS devices. If you have multiple albums checked, but iTunes shows a total of 0 photos, then you have the problem.
I spent an hour with an Apple Genius. he couldn't find any mention of this problem in their internal support system. His recomendation was to reinstall the operating the system. I suspect that this won't solve it.
The only solution I have found is to restore iPhoto 9.4.1 and the corresponding iPhoto library from your backups.
I would refrain from upgrading to iPhoto 9.4.2 until Apple has a fix for this issue.

I have a MacBook Pro 15" laptop with Retina running OSX 10.8.5. It will not recognize that my android device (Samsung Galaxy Note3). I am using the standard USB that came out of the box to connect my device to my MAC. Deleted Kies 4 MAC. Help Pls!

I have a MacBook Pro 15" laptop with Retina running OSX 10.8.5. It will not recognize that my android device (Samsung Galaxy Note3). I am using the standard USB that came out of the box to connect my device to my MAC. Deleted Kies 4 MAC. Help Pls!

Dee002 wrote:
MacBook's only have 2.0 USB ports.
Wrong.
If you're not going to provide correct advice then don't repsond at all.
http://www.apple.com/macbook-pro/specs-retina/

I am trying to update my iPod but I can't until I sync it. However when i try to sync it a message pops up and says "Blythes iPod" can not be synced because a session can not be started with this device. What do I do? Help!

I am trying to update my iPod but I can't until I sync it. However when i try to sync it a message pops up and says "Blythes iPod" can not be synced because a session can not be started with this device. What do I do? Help!

https://support.apple.com/kb/TS1567
Ah, it has been mentioned daily esp since iOS 5 / iTunes 10.5 but has always been there as an issue.
Order of attempts:
Repair the installers
Uninstall EVERY Apple component (auto and manual)
Services: Restart all 3 Apple items (AMS, Bonjour, iPod)
I* always do the last almost, then launch iTunes, and only then connect iPod.
IF you see a yellow alert in Devices and Printers or in Device Manager, then I could find NO WAY to fix or repair other than a clean OS. Something messed up the device driver support.
If/when Windows asks "what to do when it detects iPod"? don't chose any default action, to me, based on hunch and 3 PCs, that seems to mess AMS up for some reason.
Tried with Windows 7 64-bit Pro and Home Premium, and also Deve Preview 8 (which other than the inability to update iOS to 5.0 seems to run better -- except when it comes to AMS thing! so seems Apple is not on the same page writitng drivers.

I have one icloud account sync with two devices. I made a note on my iphone. Suddenly it lost and all i see is note from my ipad. Is there any way to restore the note? Help me pls. Thanks.

Please help me as my note from iphone lost when it sync with another device. How can i restore back the note?

Welcome to the Apple Community.
The difficulty in restoring iCloud data from a back up is that the back up is older than the current version on iCloud and anything that is restored gets removed again when an iCloud sync occurs. I have previously suggested ways to recover contacts, calendars etc, and other users have confirmed that they work, as such I am making the following suggestions to recover lost notes, but please note, as yet success is unconfirmed ***.
Recovering your notes is quite time consuming, you may wish not to save all your notes to save some time, if they are not of importance.
Ensure the device is connected to your local network.
Start the restore from iCloud back up.
Allow the devices settings to restore (watch for the confirmation of completion).
As the apps begin to restore pull the connection to your router WAN port (the one that goes to the telephone point).
Wait for the time out confirmation.
Open the 'Notes' app, and open your first note (assuming your deleted notes have now been restored).
Select the share option at the foot of the screen (rectangle with arrow) and choose mail.
Send the email to yourself (If they won't send, save them to draft)
Repeat steps 7 & 8, until you have copied all the notes you wish to save to email.
Reconnect the router to the internet and let the restore process complete.
Navigate to settings > iCloud and make sure 'Notes' syncing is enabled.
Open the 'Notes' app, check that iCloud notes have reverted to how they were before starting the restore.
Open the 'Mail' app and open the first email you sent yourself and copy the text you want in the note.
Open the 'Notes' app and create a new note in the iCloud, paste the text you copied.
Go to iCloud.com on a computer and check that the note has synced to iCloud.
Repeat steps 12, 13 & 14 until you have recovered all your notes.
May I suggest that you carry out a back up to iTunes before you try anything, that way should things become even worse, you can at least restore back to where you are now.
*** As a matter of protocol, anything that I can’t test myself will need to be confirmed by at least 5 individuals before I’m willing to accept it as confirmed. At this time only 2 individuals have confirmed it to work.

HT1386 how can i do this in the itunes 11? the "Sync with this [device] over Wi-Fi" option is not available in the summary

the "Sync with this [device] over Wi-Fi" option is not available in the summary part on the new itunes. Anyone know where this option is on itunes 11?

If you feel misled then that is how you feel and I understand that. You are entitled to feel that way. But the iPad DOES work with Leopard 10.5.8 but you have to sync with the cable. When I bought my iPad1 - I was using a MacBook running 10.5.8. I upgraded to Snow Leopard in anticipation of the next generation of Apple iDevices and this past Christmas I received a new MacBook Pro running Lion 10.7. I still have the MacBook running Snow Leopard and my wife uses that one as her own laptop now.
As the iPad became more popular - users cried for a PC free device as well and now the iPad is PC free as long as you are running iOS 5. So apple has provided a way to use an iPad without the need for a computer at all. I really believe that Apple has provided a way for many people to take advantage of their newest device and it does not necessitate the purchase of a new computer or OS.
I am by no means defending Apple, but I think they have done a pretty amazing job with a device that is still just under two years old. It is still "backwards" compatible with two older versions of Mac Operating systems and with two MS operating systems as well.
I realize that everybody cannot dump their current computer and OS every time a new device hits the market, but at some point, software is upgraded, computers are upgraded and new phones, MP3 players, iPods, and iPads are released. Unfortunately, if you want the latest and greatest technology, sometimes you just have to bite the bullet and spend the money.

HT201269 Hi, my itunes account will not sync with my devices. I've tried repairing my itunes account, deleting and installing it but nothing wokrs. I've tried it with two devises and neither work. Can anyone help? Thanks

Hi,
I'm having problems with my itunes syncing with my devices. I tried it with my old iphone 4 and now my iphone 5S.
When I plug the phone in, the computer recognises it as it starts to charge, but it doesn't get picked up by itunes.
I've tried repairing my itunes account, and deleting and reinstalling it.
Can anyone help?
Thanks,
Laura

Hi HILogics,
Please refer to following KB and check if can help you.
You cannot synchronize an Exchange mailbox after you update
an Apple iOS device to iOS 7.0
If this issue still exist, please check if find some relevant clues in log files on the Exchange Server computer.
Please also refer to following article and check if help you.
Exchange
ActiveSync Mailbox Logging
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

My ical won't sync with iPhone 4 after IOS 6.0.1 update

My ical won't sync with iPhone 4 after IOS 6.0.1 update. The "sync calendars" option is no longer available after I installed this update. Any ideas???I have tried a few times to sync, and nothing has changed on my calendars. I have had so many troubles with this update. Grrr...

I tried the same but it did not worked. But, i got a solution. I accessed gmail on my laptop. Went to gmail settings. There is a option to add a device. A iPhone was already listed. I clicked Revoke to remove it. Then i clicked add new device and gave it iPhone name and a new 16-20 character password was geenrated. I used it to configure gmail on my Iphone and it worked beautifully. So glad i have been able to fix this. That password is a one time password to authenticate that device.

Dataguard configured using RMAN not in sync with Primary

Hi All.
I have configured physical standby using RMAN it has errored out as below message since the Physical standby is came in Mount state and it is not in sync with Primary.
$ rman target sys/oracle1@PROD_st_STBY auxiliary /
Recovery Manager: Release 11.2.0.1.0 - Production on Sun Jul 29 13:27:02 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: PROD_ST (DBID=609107922)
connected to auxiliary database: PROD_ST (not mounted)
RMAN> duplicate target database for standby dorecover;
Starting Duplicate Db at 29-JUL-12
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=156 device type=DISK
contents of Memory Script:
set until scn 239665;
restore clone standby controlfile;
executing Memory Script
executing command: SET until clause
Starting restore at 29-JUL-12
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /oracle1/oraerp/PROD_st/rman/07ngg1p6_1_1
channel ORA_AUX_DISK_1: piece handle=/oracle1/oraerp/PROD_st/rman/07ngg1p6_1_1 tag=TAG20120719T140110
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:01
output file name=/oracle1/oraerp/PROD_st/cont_.ctl
Finished restore at 29-JUL-12
contents of Memory Script:
sql clone 'alter database mount standby database';
executing Memory Script
sql statement: alter database mount standby database
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/29/2012 13:27:29
RMAN-05501: aborting duplication of target database
RMAN-05001: auxiliary file name /oracle1/oraerp/PROD_st/undotbs1.dbf conflicts with a file used by the target database
RMAN-05001: auxiliary file name /oracle1/oraerp/PROD_st/sysaux.dbf conflicts with a file used by the target database
RMAN-05001: auxiliary file name /oracle1/oraerp/PROD_st/system01.dbf conflicts with a file used by the target database
RMAN>
SQL> select name,open_mode from v$database;
NAME OPEN_MODE
PROD_ST MOUNTED
SQL> select name,db_unique_name,database_role from v$database;
NAME DB_UNIQUE_NAME DATABASE_ROLE
PROD_ST PROD_st_STBY PHYSICAL STANDBY
SQL>
SQL> alter database recover managed standby database disconnect;
Database altered.
SQL>
SQL> alter system set log_archive_dest_state_2=enable;
System altered.
SQL> sho parameter log_archive_dest_2
NAME TYPE VALUE
log_archive_dest_2 string LOCATION=/oracle1/oraerp/PROD_
st/arch/ VALID_FOR=(ALL_LOGFIL
ES,ALL_ROLES)
On Primary
==========
SQL> SELECT THREAD# "Thread",SEQUENCE# "Last Sequence Generated"
FROM V$ARCHIVED_LOG
WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$ARCHIVED_LOG GROUP BY THREAD#)
ORDER BY 1; 2 3 4
Thread Last Sequence Generated
1 281
ON STANDBY
SQL> SELECT ARCH.THREAD# "Thread", ARCH.SEQUENCE# "Last Sequence Received", APPL.SEQUENCE# "Last Sequence Applied", (ARCH.SEQUENCE# - APPL.SEQUENCE#) "Difference"
2 FROM
3 (SELECT THREAD# ,SEQUENCE# FROM V$ARCHIVED_LOG WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$ARCHIVED_LOG GROUP BY THREAD#)) ARCH,
4 (SELECT THREAD# ,SEQUENCE# FROM V$LOG_HISTORY WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$LOG_HISTORY GROUP BY THREAD#)) APPL
5 WHERE
6 ARCH.THREAD# = APPL.THREAD#
ORDER BY 1; 7
no rows selected
SQL>
SQL> SELECT THREAD#, LOW_SEQUENCE#, HIGH_SEQUENCE# FROM V$ARCHIVE_GAP;
no rows selected
SQL>
Please suggest solution.
Best Regards,
Edited by: user13707876 on 19-Jul-2012 02:04

Hi,
It has worked now since error with warnings encountered as below:
$ rman target sys/oracle1@PROD_st_STBY auxiliary /
Recovery Manager: Release 11.2.0.1.0 - Production on Sun Jul 29 15:57:39 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: PROD_ST (DBID=609107922)
connected to auxiliary database: PROD_ST (not mounted)
RMAN> duplicate target database for standby nofilenamecheck;
Starting Duplicate Db at 29-JUL-12
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=156 device type=DISK
contents of Memory Script:
restore clone standby controlfile;
executing Memory Script
Starting restore at 29-JUL-12
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /oracle1/oraerp/PROD_st/rman/0enggc17_1_1
channel ORA_AUX_DISK_1: piece handle=/oracle1/oraerp/PROD_st/rman/0enggc17_1_1 tag=TAG20120719T165607
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:01
output file name=/oracle1/oraerp/PROD_st/cont_.ctl
Finished restore at 29-JUL-12
contents of Memory Script:
sql clone 'alter database mount standby database';
executing Memory Script
sql statement: alter database mount standby database
contents of Memory Script:
set newname for tempfile 1 to
"/oracle1/oraerp/PROD_st/temp01.dbf";
switch clone tempfile all;
set newname for datafile 1 to
"/oracle1/oraerp/PROD_st/system01.dbf";
set newname for datafile 2 to
"/oracle1/oraerp/PROD_st/sysaux.dbf";
set newname for datafile 3 to
"/oracle1/oraerp/PROD_st/undotbs1.dbf";
set newname for datafile 4 to
"/oracle1/oraerp/PROD_st/users01.dbf";
restore
clone database
executing Memory Script
executing command: SET NEWNAME
renamed tempfile 1 to /oracle1/oraerp/PROD_st/temp01.dbf in control file
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 29-JUL-12
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_AUX_DISK_1: restoring datafile 00001 to /oracle1/oraerp/PROD_st/system01.dbf
channel ORA_AUX_DISK_1: restoring datafile 00004 to /oracle1/oraerp/PROD_st/users01.dbf
channel ORA_AUX_DISK_1: reading from backup piece /oracle1/oraerp/PROD_st/rman/09nggc0j_1_1
channel ORA_AUX_DISK_1: piece handle=/oracle1/oraerp/PROD_st/rman/09nggc0j_1_1 tag=TAG20120719T165547
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:03
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_AUX_DISK_1: restoring datafile 00002 to /oracle1/oraerp/PROD_st/sysaux.dbf
channel ORA_AUX_DISK_1: restoring datafile 00003 to /oracle1/oraerp/PROD_st/undotbs1.dbf
channel ORA_AUX_DISK_1: reading from backup piece /oracle1/oraerp/PROD_st/rman/08nggc0j_1_1
channel ORA_AUX_DISK_1: piece handle=/oracle1/oraerp/PROD_st/rman/08nggc0j_1_1 tag=TAG20120719T165547
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:03
Finished restore at 29-JUL-12
contents of Memory Script:
switch clone datafile all;
executing Memory Script
datafile 1 switched to datafile copy
input datafile copy RECID=1 STAMP=789926299 file name=/oracle1/oraerp/PROD_st/system01.dbf
datafile 2 switched to datafile copy
input datafile copy RECID=2 STAMP=789926299 file name=/oracle1/oraerp/PROD_st/sysaux.dbf
datafile 3 switched to datafile copy
input datafile copy RECID=3 STAMP=789926299 file name=/oracle1/oraerp/PROD_st/undotbs1.dbf
datafile 4 switched to datafile copy
input datafile copy RECID=4 STAMP=789926299 file name=/oracle1/oraerp/PROD_st/users01.dbf
ORACLE error from auxiliary database: ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 1 thread 1: '/oracle1/oraerp/PROD_st/redo.log'
RMAN-05535: WARNING: All redo log files were not defined properly.
ORACLE error from auxiliary database: ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 2 thread 1: '/oracle1/oraerp/PROD_st/redo_2.log'
RMAN-05535: WARNING: All redo log files were not defined properly.
ORACLE error from auxiliary database: ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 5 thread 0: '/oracle1/oraerp/PROD_st/log5.log'
RMAN-05535: WARNING: All redo log files were not defined properly.
ORACLE error from auxiliary database: ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 6 thread 0: '/oracle1/oraerp/PROD_st/log6.log'
RMAN-05535: WARNING: All redo log files were not defined properly.
Finished Duplicate Db at 29-JUL-12
RMAN>
So please suggest can i rename them all redolog file.
Best Regards,

Ical not properly syncing with android device google calendar?

Similar Messages

Maybe you are looking for