ICal not recognizing user name or password when it previously did

I'm getting this all of sudden: "The server did not recognize your user name or password for account 'iCloud.' Make sure you enter them correctly". Yet, there is no where for me to re-enter my info. How do I get my computer ical and iCloud to re-sync?  Both, on my iphone and macbook, the icloud selctions for calendars are checked.  I did not change anything before this happen; and, all my other applications are syncing up perfectly.

Yes same here - I think it is because after downloading and then getting rid of the buggy mackeeper I have changed some of my keychain permissions - but like you I get the message without any indication of here to put my password into? checked my preferences for icloud and etc and all seems fine???? where do I enter them???
"The server did not recognize your user name or password for account “iCloud.” Make sure you enter them correctly."

Similar Messages

  • Exchange not recognizing user name or password

    I can not get pass this...it will not recognize the username or password....
    I have tried all the suggested ways to put my username in but nothing seems to work...
    Any suggestions that I might have overlooked.
    The imap switch is turned on. There is no ssl security.

    Is this for sending or receiving?

  • MacBook Pro 10.6.8  My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it.  All this after a scheduled software update. Any ideas??

    MacBook Pro 10.6.8  My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it.  All this after a scheduled software update. Any ideas??

    kwmlr439 wrote:
    CSOUND Read the title please:
    Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
    The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
    10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
    Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
    Message was edited by: Shootist007
    Message was edited by: Shootist007

  • Server did not recognize user name or password - i have changed password in mobile me.  where else does it need to be changed?

    Where exactly to my passwords need to match up?  I changed my mobile me password and mobileme is working fine.  When I try to access my calendar, it gives me the "Server did not recognize user name or password" warning and ical will not load.  Where else does my password need to be ch

    Hi birdman07,
    You need to go into iCal and manually change the password.
    iCal > Preferences > Accounts > MobileMe email address (CalDAV) > Account Information
    I ran into the same problem when I recently changed my password for MobileMe and this resolved it.

  • Itunes keeps asking me for a user name and password when I first open it.

    I do not allow apple to access my library or my hard drive because you guys are predators, and I have NO interest in using the app store.  I have disabled access to the store, so i do not know why it keeps asking me for a user name and password.  You have NO right to see the music THAT I PURCHASED a loooooooooong time ago.  It is my license. I should be able to play it whenever and wherever I like...and NO, I do not burn and copy my music.  I just want to play it on MY MACHINES. So, I do not need your useless snooping, which is probably the reason you want me to log in.  Who do you think you are? You didn't write the songs.  You just sell licenses. Period.  And I purchased mine, thank you.  I no longer use your store for these reasons.  I use Amazon.

    Not control-R. Command-R. Shut the computer down. Reboot it. Hold down cmd-R when you hear the chime. Keep it held down and you should see the Lion recovery partition.
    http://support.apple.com/kb/ht4718
    http://support.apple.com/kb/ts3273
    Matt

  • Invalid User Name and Password when logging onto BPM Workspace (v9.3.1)

    I have installed Hyperion Planning and the related/required products. When I attemp to log on to Workspace, I get the following message;
    'You must supply a valid User Name and Password to log onto the system."
    I have tried using the native 'admin' account, and an NTLM account that I have setup. Both of these accounts work for logging onto the the User Management Console and to the Essbase Administration Console, and I have provisioned both of them with full admin privileges.
    Has anyone encountered this issue?
    Thanks,
    -K

    Thank you all for the responses so far.
    On the first response, I had already provisioned an NTLM user that is a member of the local Administrators group with all administrative roles, and also refreshed security in EAS prior to submitting this inquiry, so that did not solve the problem.
    On the second, I cannot navigate to ../workspace/browse/configinfo without logging in so I am unable to review this information.
    On the third response, where do you provision the user to BI+? If I open the User Management Console, there are four root roles each with a tree underneath: APS 9.3.1 Server, Analytic Servers, Business Rules, and Hyperion Shared Services. Under each tree, I have provisioned the 'admin' user and the NTLM user for all roles, including Administrator, Dimension Editor and Application Creator under Hyperion Shared Services -> Global Roles. Should there be a BI+ tree? If so, it is not appearing on the list.
    Thanks for any additional info anyone can provide.
    -Ken

  • "Invalid user name and password" when synchronizin...

    I am getting an "Invalid user name or password" error on E71 after changing password on both Ovi.com web site and in sync profile on E71. Yes, I did make sure to enter the correct password into my ovi.com sync profile on the E71.
    E71 Aficionado

    I agree.  I'm in the same region of the U.S. as you (McLean VA), and I bought the E71 unlocked so I could use my T-Mobile SIM and number with it.  Another plus is it works just about anywhere in the world.
    As regards software, a lot of it just doesn't work (a la Ovi sync). There are some very nice third party apps, such as Joikuspot (WLAN anywhere) and Goosync (when it works, it's a good Google services sync tool). I am addicted to Comedy 104 on its internet radio application, and Mobbler is a pretty good way to get a last.fm-like experience on the phone.
    Shame on Nokia for releasing a not-ready for prime time service, then not supporting it.  Very Microsoft-like!
    E71 Aficionado

  • Skype Not Recognizing User Name with New Password

    It is for my family account with my wife.  I had to reset my password because I forgot it, but once I followed the steps as provided by the skype website, skype didn't recognized my skype name.  For a minute, I thought I might have forgotten the name, but I sent a text to a friend asking him what my skype name was.  He sent me the information with a picture, and I had the name right.  So pissed off at skype right now!

    When I initially tried to sign in using my Skype name  I couldn't remember my password, so I clicked on the "forgot password" link.  The Skype website then redirected me asking for my Microsoft account, which I entered and then reset the password once it asked me to do so.  I then went back to the Skype program with the new password and was told that the Skype name and password do not match.  When this happened I attempted to sign in just using my Microsoft account, but the website kept redirecting me to a page asking me for my Skype name and password.  I even tried the "Sign in using Facebook" option and that even failed because it did the same thing: requesting my Skype name and password.  In otherwords, signing with my Microsoft account doesn't work because once I enter that information, it prompts me for my Skype name and password, which is does not recognize - even though the Skype name is clearly listed as mine through my friend's information. It was just turning me is circles.

  • Imovie will not let me load a movie to You Tube error message say wrong user name and password when it is right

    imovie will not let me load a movie to You Tube. The error message from imovie says it is the wrong password and user name. I rechecked it and it is right.

    It can be tricky sometimes.  Go to your youtube account in Safari and try logging in.  They might have changed the security requirements.  In addition, you might find this software easier to use for uploading video to youtube.

  • Invalid user name and password when adding a shared printer from vista

    I have the following hardware in our house:
    1. A Vista Ultimate
    2. A Power Book G4
    3. A Netgear RangeMax router
    4. A Canon IP2200
    The printer is attached to the vista PC by USB.
    That PC is attached by ehternet to the router.
    The mac is networked to the router by wireless.
    Our wireless network is secured by WPA-PSK.
    I have set up file and printer sharing on my vista PC and on the mac.
    File sharing is working perfectly and can connect to my PC using the windows file sharing protocol (SMB).
    I then decided to add my printer as a shared device. I set the printer to shared using my vista PC.
    On the mac I opened:
    System Preferences > print & faxes > Set Up Printers > add.
    I selcted Windows Printing and then Workgroup (my vista PC is on this workgroup)
    and then clicked my PC and then Choose.
    I then get asked for my Windows Username and Passowrd.
    After typing this in I get the follwoing message.
    "Unable to connect to server with the provided password and user name.
    Error: 256"
    I know that my username and password are correct as I add the same printer to my friends XP laptop.
    Is this a vista or mac issue or both. I really don't want to have to unplug my printer or copy the file to my PC everytime I want to print something.
    I have not tried to add the printer to the mac from a XP compluter and maybe something I need to try.
    Sorry for the long post but I really want to sort out this problem.
    P.S I have googled for this problem and have come across a mac help forum with the exact smae problem. However no one has a solution.
    I hope I can find a solution for me and others having this problem.
    Power Book G4   Mac OS X (10.3.9)  

    I don't have Vista...
    I wonder if this will help:
    http://chris.pirillo.com/2007/03/07/file-sharing-from-windows-vista-to-os-x/

  • Keep getting Incorrect user name or password when Binding

    I have 24 eMacs at my school and I'm trying to setup a server. When I try to bind, it goes through the 1, 2, 3... then gives me an error message. How do I fix this?? What password and user name do I enter, the clients or the servers password?
    Is there anything else I need to do to connect to the server?
    Thanks.
    Dave
    Several Mac's   Mac OS X (10.4.4)  

    Hi David,
    Are you using DHCP on your OSX Server?
    If so you can simpley check the 'add dhcp supplied servers...' box in Directory Access > LDAP config on your clients. Make sure you enter the LDAP info for DHCP service on your server.
    Otherwise, are you sure the password server is running correctly on your server? You can check the server logs to see if there is a problem. It needs port 106 to be open... are you blocking that port with your firewall?
    hth,
    b.

  • I am not able to use my CORRECT user name and password when logging into some websites. I am using a new c omputer with Vista business.

    If I use my laptop with XP, I have no problems. I also can login on my son's computer that is running Vista premium. What is the problem?? I have tried disabling add ons, virus software, defragging, disk clean up, clearing history, cookies, cache.

    "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"<br />
    "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"<br />
    <br />
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]<br />

  • Prompt for user name and password when opening an application like Internet Explorer

    Hi
    I often use Internet Explorer using "Run as different user".  This is achieved by holding 'Shift' and right clicking the IE icon.  This is the main reason why I use IE as my default browser is Chrome.  Signing in as a different user
    is helpful when troubleshooting/customising certain applications such as Dynamics CRM.
    Is there away to force IE to always ask for credentials when I open it?  
    Marc Collins www.QGate.co.uk

    Hi GTS-NJ
    This was my first thought.  The problem I found is it requires a particular user.  I need to be flexible with the users I sign in with.
    I may have the answer though.  I have changed the security settings for trusted sites to always prompt for username and password.  I have added my sites to trusted sites.  Now when I browse to the site, it prompts me to sign in.
    Marc Collins www.QGate.co.uk

  • How can i get firefox to remember my user name and password when useing email?

    Everytime i want to log into my email,i have to type in my details.I used Firefox before on a previous pc and i was asked if i would like Firefox to remember these.That is not happening this time.Please can you help?Thanks

    * Websites remembering you and automatically log you in is stored in a cookie.
    * You need an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep that cookie, especially for secure websites and if you let cookies expire when Firefox closes
    * Make sure that you do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
    Clearing "Site Preferences" clears all cookies, images, pop-up windows, software installation, and password exceptions.
    See also:
    * http://kb.mozillazine.org/Cookies

  • How to keep from losing connection to firefox and reentering user name and password when I close a message in my e-mail that I have read

    I use firefox for e-mail and am unsure how to close a message without losing the connection to firefox. Then I need to go through the tedious task of entering my username and password everytime I am finished reading the message and close it. How can I close the message without losing connection to firefox? Also, when I select "save my password" at the sign in page it never saves the information. Why not?

    You're welcome.
    You could always get a Gmail account(free), set that up as IMAP or Exchange, then forward all of the mail from your POP account to your Gmail account.

Maybe you are looking for