ICal not working after upgrading to snow

I upgraded my 2008 MacBook to snow leopard and now iCal is not working. It says you can't use this version of iCal with this OSx. You have 3.0.8. What can I do? I installed from a disk.

After some reading of posts, I discerned that the current version of iCal was in my applications folder. I dragged the older version's icon off the dock, and replaced it with the new version. All is well now.

Similar Messages

FireWire 400&800 (IMAC Core2) NOT WORKING after Upgrading to SNOW LEOPARD!

My FireWire 400&800 (iMAC Core2) are *NOT WORKING* after Upgrading to SNOW LEOPARD!
Any Solutions?
Thanks!
--Frank Strallents
www.SHOCKPROOFX.com

I'll try your suggestions....Thanks!
Recently, I try to Re-install Snow Leopard, unfortunately, still unsuccessful.
The Mybook Icon only appears if it is connected via USB.
After using Firewire and getting used to the speed...USB 2.0 is like a Corvette racing a Veyron...lol
I am not upset on these issues, it is normal for new OS to have these problems...unfortunately, even OSX is not invincible.
I'm sure Apple/Steve is on every Programers A*s for a solution.
I still think APPLE'S OSX will still be the future of Operating system!
For now, still waiting for the patch and hopefully soon.
Suggestions are still Welcome for a Solutions:-)
Frank
SHOCKPROOFX.COM

Titles and Transitions doe not work after upgrading to Snow Leopard

I can not get my Titles or transitions to work in iMovie any more after upgrading to Snow Leopard.
Everything goes to a black screen. I am having problems with final cut express also. Anyone have an idea when there will be a patch to fix this? I would hate to have to down grade.

Holy *&$^, no kidding. I mean this is bad. I can't really do anything on iMovie at all. I really hope there is a simple solution to this, b/c if this really is part of a bad release, Apple will not hear the end of it.

USB Mouse on Hub not working after upgrade to Snow Leopard

Recently upgraded Macbook Pro from Leopard to Snow Leopard. Had a mouse and external HD attached to Mac via a USB Hub. After upgrade, HD is recognized and works fine (use it with Time Machine). Mouse will not work through hub, but is recognized by the system. Mouse is a simple wired USB device and functions fine (works when connected directly to the Mac).
Any idea what might be wrong or what needs to be done to allow the mouse to work again?

Yes it is a powered hub.

Sleep indicator light not working after upgrading to Snow Leopard

Hello all, I recently upgraded to Snow Leopard on my mid-2007 Macbook Pro (Macbook Pro 3,1, 2.4Ghz Core 2 Duo, 4GB RAM) and after the upgrade the sleep light no longer comes on when I shut the lid or when the display is powered off.
Not a huge deal, but might be an issue if I can't remember if I shut the computer down or put it to sleep last—I did not do a clean install, but would anyone happen to know something I could try before resorting to that?
Thanks, your help is much appreciated!

Have you tried Resetting the System Management Controller (SMC)?
cornelius

Weather widget not working after upgrade to Snow Leopard (Australian areas)

The weather widget is not working since I upgraded to Snow Leopard.
The feed seems to have changed from Accuraweather or something like that to Yahoo!Weather, and Yahoo!Weather seems to have problems (at least concerning weather data feeds from places in Australia).
I live in Kempsey, New South Wales (Australia). I can't input that address, because it won't validate. When I try typing my address in the widget autocompletes with "Kempsey, Austral Eden, New South Wales (Australia)" (FYI, Austral Eden is a rural parish near Kempsey, but Austral Eden is not in Kempsey and Kempsey is not in Austral Eden). That address will validate, but there seems to be no weather feed: ie. I don't get any information displayed in the widget.
The nearest address that will validate correctly is "Port Macquarie, New South Wales (Australia)". The Yahoo!Weather feed doesn't provide any information about that, either.
I can get a weather data feed for Canberra. But Canberra is 800 kilometres from here.
I think I want to change back to AccuraWeather. How would I do that?

I'm annoyed by this as well.
I was planning on buying my father the Snow Leopard upgrade for Christmas, but there is no way he'll want it without a working Port Macquarie weather widget. ( I'm not kidding! )
I've looked at the AccuWeather widget as well, but it is really ugly!

Logic not working after upgrade to Snow Leopard

I resisted upgrading to Snow Leopard while working on a few projects and just did yesterday. As feared, Logic is not working. It goes through the opening sequence and then when I try to open a project it crashes. I;ve tried rebooting. Same problem. Any ideas? Do I need to reinstall Snow Leopard? Or am I faced with reloading Logic? Any local caches I can delete to try and reset it on next start? Thanks so much.

Did you check out the links?
The first link I posted specifically says upgrading to Snow Leopard.
Here it is again.
http://support.apple.com/kb/TS3968
It may not be the solution but the fix is for Snow Leopard.

ICal not current after upgrade to Snow Leopard

Okay - I backed up my entire hard drive, then upgraded to Snow Leopard from Tiger. Everything went pretty well and I haven't had to go to the back-up data for anything - until now.
Now iCal only shows events that are 2 months old or older. Events that I had entered 2 months ago but had deleted are now there. None of my events from the past two months are showing up.
Any idea of how to fix this?
Thank you, thank you.

Start here...
Deleting FCP Preferences:
Open a Finder window. Set the view mode to columns:
Click the house icon that has your name next to it.
Click the folder "Library" in the next column.
Find and click the folder "Preferences" in the next column.
Find and click the folder "Final Cut Pro User Data" in the next column.
Move the files "Final Cut Pro 6.0 Prefs", "Final Cut Pro Obj Cache" and "Final Cut Pro Prof Cache" to the Trash and empty it.
When you have a stable set of preference files, download [Preference Manager|http://www.digitalrebellion.com/pref_man.htm] to back them up.
Next, repair permissions on your system drive using Disk Utility. Restart the computer afterwards.

TIme Machine not working after upgrade to snow lep.

I just updated to snow lep version from lep and now my time machine can't backup. It give an error message of "The backup disk image “/Volumes/Kelly Turner's Time Capsule/Kelly Turner’s iMac.sparsebundle” could not be created (error 22)."
I try to open airport utility and it finds my time capsule, but when chosen, this error message "Make sure your AirPort wireless device is plugged in and in range of your computer or connected via Ethernet and try again. (-6722)" comes up after a long search to find configurations.
When open time capsule utility, it shows the capsule, but hangs when "making backup disk available" and fails to start backup.
I have had this setup for four years and not problems with connectivity or backups. I can still get on internet using wireless with airport, but the time capsule can't see it.
HELP!

Hi, and welcome to the forums.
It sounds like you need to reset your Time Capsule; probably a "soft reset" is enough. See [Resetting an AirPort Base Station or Time Capsule FAQ|http://support.apple.com/kb/ht3728].
You might also need to do a "full reset" of Time Machine, per #A4 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
Oddly enough, the name of your Time Capsule may be part of the problem. See #C9 in Troubleshooting. Why it sometimes works for a while, then suddenly doesn't, is a mystery.

Spotlight not working after upgrade to Snow Leopard

Spotlight has not been working properly since I upgraded from Tiger to Snow Leopard. I only get partial results. I can see files in Finder that Spotlight is not picking up. It does not pick up most of the items it should.
I've reindexed and that doesn't help.
It worked perfectly before the upgrade.
Does anyone have a fix?

Try adding every drive to Spotlight's Privacy Pane in System Preferences>Spotlight, wait a few minutes & remove them, then wait a few hours/days to see if it's better.
Though slower, in the intterim, you might try...
EasyFind...
http://www.macupdate.com/info.php/id/11076
Find Any File...
http://www.macupdate.com/info.php/id/30079/find-any-file
I've actually disabled the worst Searh utility/Function I've ever seen on most of my Macs, just keep Spotlight active on a couple to try to assist with all it's problems.

Why does iccProfile not work after upgrading to snow leopard

The icc Profile for my printers Epson R2400 and Canon 4500 dont work anymore after installing snow leopard. I updated already the treiber for both printer and also loaded original icc profile from epson and canon. I print from Aperture 2.1.4. Under 10.5 I never had problems with printing.

I marked it incorrectla as unserd. sorry

Canon MP560 not working after upgrade to Snow leopard

Hi there
I'm writing in the hope that someone maybe able to help! Yesterday I upgraded my MacBook to snow leopard. Everything seems to have gone OK, however, my printer -- Canon MP560 is now not responding. When I go to print it says' /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr failed'.
The blue WiFi light is on, but nothing happens! I would be so grateful for any advice as I really don't have any idea of what to do !!!
Thanks In advance

Have you installed he most recent Canon Printer Drivers via Software Update?
Have you tried going to the "Print and Fax" pane of the system preferences, and Control-clicking into the panel at the left that would normally show installed printers?
If not, do that and if the cursor spins, wait until it stops, and the MP560 should show up as a Bonjour Printer/Scanner. Then click "+" to add a printer, then "more printers" and then select "Canon IJ Networking". The MP560 should no longer be an "unsupported printer."

GCC Elite 21n+ Printer Stop working after Upgrade to Snow Leopard

GCC Elite 21n+ B&W Laser Printer no longer works after upgrading to Snow Leopard 10.6.2.
A back-up HP 2015DN Printer works intermittently. It will not work with ethernet cable connected to Net Gear Ethernet Hub (model FS105). But will work most of the time when ethernet cable is connected directly to back of computer.
Back to GCC printer. Just cannot get it to work.
But I cannot figure out what the IP address is for the GCC printer. Tried 192.168.1.4:9300
See post (discussions.apple.com/thread.jspa?messageID=10127869). Still did not work.
GCC tech have this work around. Here is what I received from GCC via email.
+At 01/02/2010 12:21 AM we wrote -+
+Since Apple has made the decision to eliminate Appletalk from it's Operating System, you are now forced to set the printer up over TCP/IP. Please keep in mind that GCC has never provided drivers for the Mac. We use the Apple Built in Print Driver. We do provide an OS X PPD Installer located on our website that I recommend you download, unstuff, install, reboot your Mac, then add the printer. You can find the Installer at http://www.gccprinters.com/support/doc/ Click on the Model of your printer and download the OS X Installer. DO NOT download the Applications Folder.+
+You will need to set the printer up over TCP/IP, which means you will need to pull the IP Address of the printer from the Printers Configuration Page. Once you've done that, please do the following:+
+You can add the printer over IP, that should work fine. Here are some steps for you to take.+
+1) Select 'System Preferences...' (4th item) from the 'Apple' menu. The 'System Preference' panel will appear as a new window.+
+2) Click on 'Print & Fax' icon (second row 'Hardware', second icon from right side). The 'System Preferences' panel will change into the 'Print & Fax' panel without opening a new window.+
+3) Click on the '+' button to add a printer (2/3 the way down on the left side on the 'Print & Fax' panel). The 'Add Printer' dialog will open in a new window.+
+4) Select the 'IP' icon in the top row of the 'Add Printer' dialog.+
+5) Next to 'Protocol' select LPD Line Printer Daemon.+
+6) Next to 'Address' type in the IP address you assigned to the printer. The Mac should prompt "complete and valid address".+
+7) (Optionally) Next to 'Name' set the name of the printer to something friendlier. Normally it defaults to the IP address enter in the previous step. The 'Name' is what the printer is called in the print dialog.+
+8) (Optionally) Next to 'Print Using' change/verify the PPD.+
+9) Click 'Add' in the bottom right corner. After a few moments the 'Add Printer' dialog will close.+
+10) The printer added in the previous step will appear in the list on the left side of the 'Print & Fax' panel. Click on the close box in the left-top of the 'Print & Fax' panel.+
+11) Done. You should be ready to print.+
Still cannot get the GCC printer to work or discover its IP address. Printer's Configuration page says
TCP/IP: Enabled IP address: Unknown subnet Mask 255.255.255.0
When I download the Drivers from GCC Web Site I only get a Text Document with loads of meaningless
gibberish. There is nothing to unstuff and install.
All worked well with OS 10.5.
Thanks for shedding any light.
John L.
Thanks,
John

Hello John,
At this stage you will not be able to get this to print until the printer has a valid IP address. According to your post, the IP address setting is enabled but the actual IP address is unknown. This is most likely a result of the GCC being set to DHCP but if there is no DHCP server or router capable of assigning the printer an IP address, then it will not get a valid address.
So, the first thing I recommend is you check the documentation for manually setting an IP address into the printer. This address needs to be in the same subnet as your Mac. If you check System Preferences > Network on the Mac, you will see your IP address and subnet mask. If the subnet mask is set to 255.255.255.0, then you subnet will be the first three sets of numbers. For example, a device with an IP address of 192.168.1.12 and a subnet mask of 255.255.255.0 has a subnet of 19.2.168.1 and a network address of 12. Ideally, so that other devices can communicate with this device, they also need a subnet of 192.168.1 but a different network address, any number between 1 and 250 but one that is not already being used by another device, such as 12 in this example.
Once you have the IP address set in the printer, then you add the printer as the GCC tech stated, using IP > LPD for the protocol. Note that you will only need to enter the IP address, such as 192.168.1.4 as per your post example. Don't enter any other numbers, such as the 9300 port reference you have tried already the colon after the IP address followed by the 9300).
For the Print Using, you can use Generic PostScript to begin with as a test. If you then wanted to use the GCC PPD, then the link is okay. When you select the 21+n the next page shows the 21+ installer for OS 9 and OS X. This is a stuffit packed file so you will need some form of Stuffit (Stuffit Expander is a free download) to unpack the file first. Once unpacked, there is most likely an installer that you run. This will copy the PPD files for the printer to the appropriate folder.
Hope this helps. Please reply if you require more help.
Pahu

Iphone 4 Home button not working after upgrade to OS 4.3.5

Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!

It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

File- Export not working after upgrade from 11i to R12

Hi,
File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
Thanks and Regards,
Jagadeesha

Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 196613
In Argument 1 - Type: Number Value: 54
Out Argument 0 - Type: String Value: 12
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_MENU_ITEM Built-in:
In Argument 0 - Type: String Value: FILE.EXPORT
Out Argument 0 - Type: Integer Value: 19
Executing GET_MENU_ITEM_PROPERTY Built-in:
In Argument 0 - Type: Integer Value: 19
In Argument 1 - Type: Number Value: 79
Out Argument 0 - Type: String Value: TRUE
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.OUT
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: N
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing GET_APPLICATION_PROPERTY Built-in:
In Argument 0 - Type: Number Value: 75
Out Argument 0 - Type: String Value: IHR40P
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
# 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
# 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

ICal not working after upgrading to snow

Similar Messages

Maybe you are looking for