ICal not working properly again

I'm not sure that I have a question at all - maybe just a rant - again. Why is it that Apple, in all it's power and glory, so help me Steve, cannot get a simple little program like iCal to display the correct date in the dock? Huh? Why is that?? Arrgghh.

Hi Richard,
Works all the time for me.  So that means its nothing that Apple can fix.  Its something on your computer.
What have you tried to troubleshoot the issue so far?
If you haven't already try quitting iCal and then removing Your User > Library > Preferences > com.apple.ical (there may be more than one, remove them all) and then restarting the computer.

Similar Messages

  • Can I exchange for a new laptop? Since December it has been having hardware issues and it has already needed to get parts changed twice already. My laptop is not working properly again. I feel like I have unfortunately gotten a lemon laptop.

    Can I exchange for a new laptop? Since December it has been having hardware issues and it has already needed to get parts changed twice already. My laptop is not working properly again. I feel like I have unfortunately gotten a lemon laptop.

    Apple will repair or replace at its discretions, parts found to be defective in materials or workmanship.
    You will have to discuss whether your history warrants a complete replacement with the folks at the Genius Bar.
    I do not speak for Apple, but it sounds to me like you have been unlucky, but not unlucky enough (or have spent so much time with your MacBook in the shop) to warrant a complete replacement.
    You have not provided any details of what the faults were or what was replaced. If they replaced the motherboard, you already got a new computer -- because everything except the drive and the display is on that board.

  • Ical not working properly

    Ical has stopped functioning properly. I recently installed the IPhone update 2.2 and that is when Ical went screwy.
    Ical on the MacBook Pro will not allow me to add new events, to do's, etc.
    All of my categories, normally on the left side of the Ical are missing.
    The ability to scroll between day, week, and month does not work. I can use the commands in the view menu.
    Anyone have any thoughts or experienced any other issues with Ical?

    Hi Richard,
    Works all the time for me.  So that means its nothing that Apple can fix.  Its something on your computer.
    What have you tried to troubleshoot the issue so far?
    If you haven't already try quitting iCal and then removing Your User > Library > Preferences > com.apple.ical (there may be more than one, remove them all) and then restarting the computer.

  • ICal not working properly after ML upgrade

    After upgrading to Mountain Lion, all of my iCal events are GONE!  It also is having sync issues.

    Can you provide more detailed information? I am also having a problem, here's the error message I'm getting:
    The server is currently unreachable or the connection was blocked.
    I have deleted the account and added it back in but I still the error.
    I'm running ML 10.8.2

  • Mini Display Port to DVI Resolution Not Working Properly Again

    hink another EFI Update is in Order, Just used the Mini DisplayPort to DVI Adaptor to a NEC 3090WQxi Monitor and the Max Resolution is only 1600X1200, while my older (Late 2007) Macbook Pro needed an EFI/SMC update for Graphics before it detected the available resoltions for the same Monitor. Apple Support please fix this issue, or direct me in solving a very frustrating Problem
    For anyone at Apple to Fix this annoying problem here are the Details.
    Model Name: MacBook Pro
    Model Identifier: MacBookPro5,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.8 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 6 MB
    Memory: 4 GB
    Bus Speed: 1.07 GHz
    Boot ROM Version: MBP51.0073.B02
    SMC Version: 1.33f6
    Cheers,
    Message was edited by: winxp
    Message was edited by: winxp
    Message was edited by: winxp
    Message was edited by: winxp
    Message was edited by: winxp

    Hi DjTimmyM,
    Thanks for visiting Apple Support Communities.
    Start with the steps below to troubleshoot issues with video out from your MacBook Pro:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    Best Regards,
    Jeremy

  • My APPLE ID is NOT working properly. I am frustrated beyond belief I have tried time and time again to change my apple ID and it keeps reverting back to my original ID!! I even set up a new email to try to submit a new id and it still does not work

    My APPLE ID is NOT working properly. I am frustrated beyond belief I have tried time and time again to change my apple ID and it keeps reverting back to my original ID!! I even set up a new email to try to submit a new id and it still does not work

    To change your Apple ID, follow these steps:
    Go to My Apple ID (appleid.apple.com), click "Manage your Apple ID", and sign in.
    If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID. If you are unable to receive messages at your trusted device, follow the guidelines for what to do if you can't sign in with two-step verification.
    In the "Apple ID and Primary Email Address section," click Edit.
    Enter the email address you want to use, then  click Save Changes. Apple will send a verification email to that  address.
    Open the  email  from Apple, then click Verify Now in the email.
    When the My Apple ID page opens, sign in with your renamed Apple ID.
    If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID.
    After you see a message indicating that verification is complete, remember to update all of the stores and services that you use with your  Apple ID.

  • Since I installed the new OS X Lion, the iCal syncing through iTunes is not working properly.

    Since I installed the new OS X Lion, the iCal syncing through iTunes is not working properly.
    When I sync my MacBook Pro with my iPhone and iPad, the events set in both devices (iPhone & iPad) are not transfered to the iCal on my labtop. Events created in both devices are transfered and copied betwen them when I sync them with the iTunes app (through the MacBook Pro) but they are not trasfered/copied into the labtop (iCal). The events created in the iCal (on my MacBook) are tranfered to the devices as two events on same hour. One, with the description created on the iCal, and the other as a New Event (no description). This is happening since I installed the new OS X Lion last week.
    I file a report and talked with an Apple Support Representative, but they could not help me. They have not receive any other reports on this matter. Do someone has confronted this issue. I need to find out how to solve this problem.
    Regards,
    JAD

    Hi Sydness,
    Thank you very much for your help. It just worked fine. I have 4 macs in my company for 25 years (one is updated each year), and it is the first time I could not solve a problem for weeks. It gave me the opportunity to join this great community.
    Charles
    Sydness wrote:
    I reset my SyncServices and the calendar sync worked perfectly after that.
    I followed the instructions found here:
    http://support.apple.com/kb/TS1627?viewlocale=en_US
    Mac OS 10.7.1 - MacBook

  • I had photoshop elements 8 installed on my previous computer and it did not work properly when it came to sizing  photos for a website I was adding to.  I now have a new computer which runs windows 7.  Is it worth installing it again on my new computer?

    I had photoshop elements 8 installed on my previous computer and it did not work properly when it came to sizing  photos for a website I was adding to.  I now have a new computer which runs windows 7.  Is it worth installing photoshop elements 8 again on my new computer or will it be a waste of time?

    I have PSEv.8 on my computer running WINDOWS 7. It works perfectly..
    Perhaps you need help with saving files for web use.. Will be pleased to assist you when you get everything set up.

  • My program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but  it does not add any ebook either.  I uninstalled the program and reinstalled again but nothi

    my program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but  it does not add any ebook either.
    I uninstalled the program and reinstalled again but nothing gone better-
    What should I do?
    Best regards

    Do you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
    Re: Everytime I close Itunes it loads back up

  • Html is not working properly

    i was trying to work on texteditor to code a simple html page but its not working properly like the shows only two color on the background that are green and black
    i dont know whats the issue but it use to work fine in mountain lion
    i have even tried to use color code still it didnt work then  i re-installed the os but the same problem again!
    is there any special setting ?
    i have change it to plain text and traditional html ..
    thank you

    Hi,
    Do you really think it applies to all these:-
    Categories:  Accessibility,  Boot Camp,  Finder Tabs & Tags,  iCloud Keychain,  iMessage & Messages,  Internet & Wi-Fi,  Installation, Migration & Setup, Mail, Contacts & Calendar,  Maps,  Multiple Displays,  Printing, Users & Groups,  Using OS X Mavericks    
    Tags:wireless, backup, ical, screen, email, duplicate, printer, preferences, time,
    hard, login, restart, vpn, font, dvd, excel, kernel, address, migration, mode, locked,
    dvd_problem, hdd, thunderbolt, gray
    It would be useful to see the HTML code you are using.
    It would also useful to know which version of HTML you are using to do that.
    8:57 pm      Wednesday; March 12, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Iphone 4 mic is not working properly

    Hello,
    Well my i droped my phone 4 and the back has been broken, well i replaced it with a new one, the result is that
    My iphone camera was broken and i tried to replace it with a new one but the problem persist, and the mic is not working properly
    That when i receive a phone call or when i call someone my iphone mic work sometimes and stop others and i discovered that by tapping on
    The back of the iphone it work, and meanwhile i can use the mic for recording voice memos or for using viber or any software using the mic
    And it works very good, only in phone calls it stop working and by tapping on the back it work again,
    Anyone can help me???
    Thanks guys

    Thanks for the reply but yes it does record voice memo because there are 2 mics 1 on top and 1 on bottom.
    the one that is using for making phone calls is the bottom one.Therefore top 1 is good but bottom is not.

  • Subvi does not work properly when called inside a vi

    Hello Every body
    thanks for your help. i am using a sub vi for sine signal generation. as a vi it works fine. but when i called this subvi inside another VI it gives some problems. for example timer indicator works properly.it reinitializes as well in the sub vi, but in the main VI it does not work properly. means does not count the time.in the sub vi on the fly i can change the values of frequency and amplitude in real time, but when i use as sub vi, it does not reponse as i change the values in the control arrays.similarly pause and continue works properly in the sub vi, but once again in the main VI, it does not work properly.graph indicator also work properly in the sub vi. but here once again it does not work properly in the main VI.the pause resume indicator also does not blink, when it is continue. in the subvi it blinks very well.generally why the sub vi does not work properly inside the VI?i am sending my VI and sub vis.
    any tips would be highly appreciated.
    thanks
    Regards
    Attachments:
    vi.zip ‏87 KB

    I just want to add some more details to Dan's answer. The subVI is acting exactly like you've coded it. The mistake is in understanding how subVIs work. When you call a subVI (or a function in any other language), you pass some parameters to it, the subVI does it's thing and returns values. the subVI does not accept new parameters from the calling VI until it returns to the caller and the caller runs the subVI again. In your case, you have a subVI with a while loop. You have some front panel control wired to the subVI's stop terminal. When first called, the value is false. So the subVI will keep running until the subVI's stop button becomes true but you cannot change it from main until the subVI finishes and returns so the subVI will never stop. As Dan says, the solution is pass references of front panel controls to the subVI and have the subVI monitor those references for changes and to update references to indicators on Main. You subVI does not need any front panel controls or indicators of it's own.

  • Help, web cam is not working properly with win vista

    Hii.. my web cam is not working properly with win vista..even if the icon appears bt it does nt start.. its
    lenovo easy capture 2.5...so if u cud suggest me anything...
    Moderator note; subject edited

    re-install drivers and try again. ( also easy capture )

  • My HP-Pavilion dv6 web cam is not working properly, fluctuating always

    My HP-Pavilion dv6 web cam is not working properly, it is fluctuating always

    re-install drivers and try again. ( also easy capture )

  • Pinch to zoom not working properly in Safari 5.1

    I have OS X 10.6.8 (downloading lion as i type). I updated safari this morning and ever since I did that, pinch to zoom isnt working right. I can pinch to zoom in, to a certain extent but I can not get as large as I want as I used to and I cannot zoom back out at all. It seems to be working properly in my other apps so I guess it's something in safari. I'm not very Mac savvy since everything usually works and I dont have to be, so maybe I'm missing something? Help! I use this feature CONSTANTLY and desperately want it back. Thanks in advance!

    Same here.
    MBP Late 2007 with Magic Trackpad
    OSX 10.6.8
    Safari 5.1  (6534.50)
    I could zoom in once and then it wouldn't work anymore by using the pinching on the Magic Trackpad.
    Pressing Command and +/- still worked.
    I deleted Safari 5.1 and reinstalled the Combo Update to get 5.0.5 back and it worked properly again.
    Then I installed 5.1 another time and had the same error again.
    I guess I got to roll back to 5.0.5

Maybe you are looking for