ICal on iPad times are different?

When I try to import my schedule from my MBP to iCal on my iPad I get an error.  I think the error is because the iPad time and the time on iCal are different, on the iPad.  I am not able to figure out how to reset the iCal time on my iPad to correspond with the time in iCal.
Any suggettions would be appreciated.

I just checked my iPad again and it looks like the time zone is Korea on iCal and local TX time as far as the iPad itself is concerned.  The red time line on iCal is what is not right and I can't figure out how to change it.

Similar Messages

  • When i sync my ipad and imac on ical the times are different yet the time zones are the same, any ideas why?

    when i sync my ipad and imac on ical the times are different yet the time zones are the same, any ideas why?

    Under the summary tab in iTunes make sure you have Automatically Back Up This computer. If you have iCloud selected it won't back up when syncing.

  • When putting an event on my iPhone calendar and the time, when it goes to iCloud to my laptop or iPad calendar the times are different.  How can I make the time the same?

    When putting an event and the time on my iPhone calendar, when it goes to iCloud to my laptop or iPad calendar the times are different.  How can I make the time the same?

    Welcome to the Apple Community.
    Is the calendar you are adding events to on the phone an iCloud calendar.

  • Device time and Network time are different - why?

    My Device Time and network time are different by a couple of minutes. My friends BB is different by about 1 hour.
    - Why is that?
    - How do we fix it?
    Solved!
    Go to Solution.

    The device does not automatically update its time.
    What are you time settings? Network or BlackBerry?
    While in the Date/Time settings > Menu > Update time and it will update the time according to the network.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • ICal Times are Different on iPhone and Mac

    Since upgrading????? to 10.5 all my events on my iPhone are now one hour later than the events on my Mac's iCal.
    What is going on with iCal???
    Cannot publish and now I cannot get the events to have the same start time as what is on my Powerbook.
    Please, could someone (Apple!) please help
    p.s. yes the time on both Powerbook and iPhone are the same

    HEre is the fix:
    On your iPhone, Go to Settings > General > Date & Time and turn the time zone support off then check your calendar items. If they are normal once again, you can turn the Time zone support back on. That was simple! If they are not fixed. Toggle the time zone support on and off. It worked for me the first time but other say it takes a few tries.

  • ICal sync issues (times are incorrect)

    Hi guys
    I am having some strange issues with iCal at the moment. As you can see below when I send out invities people are receiving two seperate times in the body of the email, and in the ics attachement.
    I have done some browsing and can confirm the following:
    1/ All my calendars (iCloud, iCal) are set to Singapore timezone as well as having Time Zone support ON
    2/ My iPhone is set to Time Zone support on and to Singapore time
    Screenshot of the email attached.
    Any help or suggestions are much appreciated.

    you may want to check your time settings on your macpro first: system preference>date&time>time zone... make sure you have the right time zone and city, then in system preference>date&time>date&time... check "set date & time automatically".
    then in ical: ical>preferences>advanced, make sure you have "Turn on time zone support" selected.
    finally on the iphone: settings>general>date&time, make sure you have time zone support selected and the right time zone/city.
    hope this helps.

  • Suppose the loads are running in BW, but the BW & System Times are differe

    BW system time is greater than the R/3 system, how we can ensure wether the loads are uploaded into BW System?

    Hi...........
    Look..............While loading data From R/3 to BW............first Extraction will start...........ie the Extraction Job..............if u copy the Request no from the Header tab of the IP Monitor...............then go to the Source System ..........SM37 >> Put the Request no with BI as prefix..............there u can see the Status of the Extraction Job...........
    Now if u r in BW............then U hav different options.......
    PSA and Data Targets/InfoObjects in Parallel >> A process is started to write the data from this data packet into the PSA for each data package. If the data is successfully updated in the PSA, a second parallel process is started. In this process, the transfer rules are used for the package data records, data is adopted by the communication structure, and it is finally written to the data targets. Posting of the data occurs in parallel by packet...................This method is used to update data into the PSA and the data targets with a high level of performance. The BW system receives the data from the source system, writes it to the PSA, and starts the update immediately and in parallel into the corresponding data target............
    In this case Extraction and Loading to the Target will complete parallely.....................when the Technical status will be green..and the Extraction node and the Processing node both will be green............at that time u will understand that load got completed..............
    PSA and Then into Data Target/InfoObject >>A process that writes the package to the PSA table is started for each data package. When the data has been successfully updated to the PSA, the same process then writes the data to the data targets.  Posting of the data occurs in serial by packet.
    In This case first the Extraction Job will get completed.............ie the Extraction node will be Green..........at that time Data Packets will be Yellow...........After some time all data packets will green..............Technical status will be green.along with the data paclets..............it means load completed............
    Only PSA >> Using this method, data is written to the PSA and is not updated any further. In this two seperate Background JObs will be created...............First the Extraction Job will completed.............then the Technical status will be green............then a new JOb will Start to push from PSA to data target............After Loading till PSA...............if u go to the Status tab..............there u will find Processs Manually tab............if u click there update to Target will start..........then Tecxhnical status will again be yellow................after update to the Target get completed....................Technical status will aagain be Green.............
    Now if u r in BI 7.0...................Then infopackage will loaddata till PSA.............u can monitor the Extraction job............Then u hav to Excute DTP to load from PSA to the target..............In the DTP monitor u will find the DTP request............in the SM#& in BI side...............u can monitor this Job.............
    Hope this helps.........
    Regards,
    Debjani........

  • ICal changes the time when importing from SonyEricsson K750i

    Hi from Stockholm,
    When syncing my mobile calendar and my iCal, all the times are set two hours behind.
    Ex. in the phone an event could be 16.00-17.00 and in iCal it changes to 18.00-19.00.
    The clocks are set the same. Timezone is deactivated.
    What to do?
    Thanx. Clack-boy.
    PowerMac G3, 1,25   Mac OS X (10.4.7)  

    hi
    i guess you are in the wrong time zone with your K750i.
    try these settings:
    iCal: in "system preferences": clock: set time zone to CEST (stockholm, sweden)
    K750i: settings for "time and date": "time zone" set to GMT + 2.00h and setting for "daylight saving" set to "standard time". don't set it to "Daylight saving" cuz it doesn't work properly then with iCal.
    if your time on the K750i is wrong now, correct it in the section "time". but don't change the "time zone" anymore.
    hope you got my meaning. apologizing for my english.
    now, it should work. at least, my iCal and K750i do
    Regards

  • TS1741 Streaming from my iPad to my tv is not working, it keeps saying the iTunes accounts are different but I've checked it a ton of times and its the same, anyone had the same problem?

    Streaming from my iPad to my tv is not working, it keeps saying the iTunes accounts are different but I've checked it a ton of times and its the same, anyone had the same problem?

    Hi JenJen73,
    If you are having issues with AirPlay streaming from your iPad to your Apple TV, you may want to take a look at the troubleshooting steps in the following article:
    Apple Support: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/ts4215
    Cheers,
    - Brenden

  • ICal on iPad no reflecting daylight savings time change correctly

    i have my iCal on my iPad to auto update with daylight savings, however, the start times are all ok, but the end times do not reflect the time change. am i missing something?

    I fixed this problem by going to system preferences--mail, calendars--and turned off time zone support. When my iPhone didn't change time for daylight savings, i had changed the time manually and apparently this moved my time zone from SF to Anchorage. After disabling time zone support, all my appointments were correct. You can also disable tim zone support withon the iCal application on a mac.

  • HT1918 How do i change my username to another when they both have accts with itunes one is on my computer and one is on my ipad? Two different e-mail address that are both mine....so how do i make one acct for both?

    How do i change my username to another when they both have accts with itunes one is on my computer and one is on my ipad? Two different e-mail address that are both mine....so how do i make one acct for both?

    If you selected open a new Apple ID account, go back a step and enter use existing Apple ID.
    You will have to set up a separate iCloud account or your iPads will mirror each other.

  • I have an iPhone and my 9 year old has an iPad, they are both linked to my Apple ID however I want his to be separate now so that we can send messages and face time. Any suggestions how I do this???

    I have an iPhone and my 9 year old has an iPad, they are both linked to my Apple ID however I want his to be separate now so that we can send messages and face time. Any suggestions how I do this???

    Thank you. I tried changing his id but it changed it on both devices:( Don't really have a clue:( I have set up an email account so that he can get an Apple ID.
    Do you by chance know how I do this?!?

  • I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

    I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

    I think this is probably a sign that your network could be better than it is.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • We are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient

    we are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient.
    Appreciate your support and if possible , how to do this?

    If you want to work with Mac OS X, you need one computer per simultaneous user.
    What you are describing, " Multiple simultaneous logins to a single computer" is not avialable on a regular Mac of any description, unless you decide to use Unix tools instead of Mac OS X.
    Server will happily store files for many, many users and provide them to multiple (up to hundreds) of computers at "near hard Drive" speeds over Gigabit Ethernet. It can make the File Sharing part easy.

  • Lightroom has crashed with error message 'error reading from its preview cache' - this happens every time i try a launch it. I have looked a forum to repair the fault. there are different recommedations.can you tell me step by step how to recify  this pro

    lightroom has crashed with error message 'error reading from its preview cache' - this happens every time i try a launch it. I have looked a forum to repair the fault. there are different recommedations.can you tell me step by step how to recify  this problem. i can not find ircat ir data etc  in the programme files. Thanks

    robmac76 wrote:
    can you tell me step by step how to recify  this problem.
    Yes:
    Step 1: Delete the preview cache.
    That's it!
    So, the trick is to find the preview cache.
    This document gives location:
    http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-41.html
    To be clear: it's a folder in with your catalog and you want to delete the whole folder but nothing else.
    If your catalog file path is "X:\My Catalogs\My Catalog.lrcat", then the preview cache "folder" will be:
    X:\My Catalogs\My Catalog Previews.lrdata
    So the trick is to find your catalog file, and since Lr won't open your catalog and run, you can't use it to find out.
    But you should be able to find it by searching your disks for *.lrcat files - do you know how to do that?
    Which OS?
    If you know the name of the catalog it will help, but also: it's probably NOT in with your program files.
    UPDATE: The above-mentioned document gives default name and location for preview cache, so if you haven't overridden the default, it should be right where that document said it would be - is it? (of course you need to know your user name too, but presumably you do, no?).
    R

Maybe you are looking for

  • How to get colla..room name in the notification mail  while creating a task

    Hi All,          I create a collaboration room, there i created one task. Asusal all the task assignees are getting notification mail. but in the mail content there is no mention of particular collaboration room. from where we created that particular

  • Dynamic selection of file in infopackage from application server

    Hi, We have a infopackage in Process chain which runs daily. In the infopackage 'EXTRACTION' tab , input file is from application server. The file we get daily is not unique. As an example file name is not like 'UNIQUE.CSV' . It varies daily and carr

  • Refreshing iTunes Shared Library

    I'm wondering if there's a way to refresh Shared Libraries in iTunes? When I import new songs onto one of my home computer's libraries, it can take days or weeks for its library to update on my other computers. Say, I import a new CD into computer A'

  • IPhoto 11 crashes system (Mountain Lion)

    Hi all-- I upgraded to Mountain Lion hoping some random reliability issues would go away.  Unfortunately, every time I open iPhoto, it crashes the whole system.  Holding down the command and option keys during boot doesn't lead to the rebuild screen.

  • IPhoto 11 says email sent but it doesn't come through?

    grrrrr.... to resize photos for Craigslist I just email them to myself and then drag them to my desktop. iPhoto is now saying that it has sent the email but I never get it into my accout??? Tried rebooting... nada...