ICal on mac not getting iCloud data

Hi,
I'm having trouble with iCal on my macbook air syncing with iCloud. When i add an event to iCal on my macbook it syncs with icloud.com and the calender on my iphone perfectly. However, if i add an event on icloud.com or the Calendar on my iphone it does not appear on iCal on my mac.
Any advice would be great!

iCloud is only set to work (properly at least) with Lion. Nice that they didn't tell anyone that ahead of time. Seems like many of us are now having syncing and other issues. Haven't found a solution yet-- and don't even know how to un-do the Cloud to at least have working programs for now.
I've seen numerous error messages and Apple is so backed up on their support lines that it's almost impossible to get through. I made a Genius Bar appt to see if they can work through it. Don't know if that might help for you, too.
One other note on Lion: My brother works at Apple Corporate and says not to take Lion yet since it has too many bugs they haven't worked through yet and causes many things to crash. Just an FYI since taking Lion at least might make the Cloud work better. But I've also been reading of people w/Lion having issues, too.
Guess this is the bad side of new products until they work through it all. Sorry I couldn't offer more-- but see if your issues might be not having Lion as your OS.

Similar Messages

I had to change my email acct and do not have access to the original one my icloud, iTunes,etc have. I changed it and signed out and was able to successfully change to the new email on iTunes and Apple ID. However, I can not get icloud to change over and.

I can not get icloud to let me change the email to my new acct???

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, and if your old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Refernce Nav igational Attribute is not getting the data in Infoprovider

Hi,
I am facing the issue with Reference Characteristic which is a navigational attribute for which data is not getting populated in the cube.Please find the below scenario.
We have three characteristics 0RECV_WBS_E , 0WBS_ELEMT, ZPSBUSA .Char 0RECV_WBS_E is reference of 0WBS_ELEMT.
0RECV_WBS_E__ZPSBUSA,0WBS_ELEMT__ZPSBUSA are the Navigational attributes of ZPSBUSA, these two are maintained as Navigational attributes in the cube and at info object level. The Nav Attribute 0RECV_WBS_E__ZPSBUSA is not getting the data in infocube where as 0WBS_ELEMT__ZPSBUSA is getting the data .The data is available for the two Nav attributes in the info object ZPSBUSA .Can you please suggest why this reference Nav attribute 0RECV_WBS_E__ZPSBUSA is not getting data in the infocube.
Thanks,
SUbhash

Hi,
I am facing the issue with Reference Characteristic which is a navigational attribute for which data is not getting populated in the cube.Please find the below scenario.
We have three characteristics 0RECV_WBS_E , 0WBS_ELEMT, ZPSBUSA .Char 0RECV_WBS_E is reference of 0WBS_ELEMT.
0RECV_WBS_E__ZPSBUSA,0WBS_ELEMT__ZPSBUSA are the Navigational attributes of 0WBS_ELEMT, these two are maintained as Navigational attributes in the cube and at info object level. The Nav Attribute 0RECV_WBS_E__ZPSBUSA is not getting the data in infocube where as 0WBS_ELEMT__ZPSBUSA is getting the data .The data is available for the two Nav attributes in the info object 0WBS_ELEMT .Can you please suggest why this reference Nav attribute 0RECV_WBS_E__ZPSBUSA is not getting data in the infocube.
Thanks,
SUbhash
Edited by: MarkSubhash on Dec 9, 2011 11:11 AM

I am not getting the data in Bex from the cube

Hi Experts,
i am not getting the data from the cube to Bex,
cube having the data, but i am not able to see this data in the Bex result area.
Can any one help me.
Best regards,
Bhaskar

Hi
In the manage cube, is reporting symbol is there for your requests
If you have any red requests delete them and refresh
If all requests having reporting symbols you may check the BEx without any filters or selection criterions
Regards
N Ganesh

Iam not getting the data on screen after using the user exit zxpadu01

Dear Freinds
 As per my requirement when the user enters value Ansal it should get defaulted to Amount field (bet01 ) based on the wage type
i have written calculation ( q0008-bet01 = ansal/100) before it getting defaulted to bet01, i found that value is not getting default on the screen for bet01 once i enter value for Ansal , please any body correct my code
in ZXPADU02 i have written the code as below :
data : wa_p0008 like p0008,
 i0008 like p0008,
 l_v_ANSAL type ANSAL_15,
 l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008. -- HERE I GOT ALL THE DATA EXCEPT BET01
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- HERE I CAN SEE EVEN THE BET01 IS FILLED
IMPORTING
prelp = innnn. --- HERE I CAN SEE LGART BUT NOT AMOUNT VALUE
endif.
when others.
endcase.
IN ZXPADU01 I HAVE WRITTEN AS BELOW:
data : wa_p0008 like p0008,
 i0008 like p0008,
 l_v_ANSAL type ANSAL_15,
 l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- I CAN SEE ONLY WHEN I COME AGAIN
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
Now my problem is as follows :
 i have entered the value for Ansal (ex: p0008-Ansal = 1000) ..........and i say enter then i should found the calculated value for the ansal through my coding
and it should display in bet01 as 10 ( q0008-bet01 = p0008-ansal /100)
but i dont find the value 10 being displayed for the field bet01 on the screen when
user enters Ansal as 1000 .........even then i have saved it to test the scenario......
now i came in displayed mode (pa20 ) for the infotype 008 for the same personnel no for the same dates .....where i created the record........i found that the value
bet01 is there i.e i can see the value bet01 as 10 ( my requiremnt here matching)
but when the user say enter during the time of creation of the record the value
bet01 is not getting defaulted with 10 .........why iam not able to understand
PLEASE ANY BODY HELP ME IN THIS REGARD
regards
shanti.

Hi Pranesh,
 i have used the logic which you hav given as below
in ZXPADU02
FIELD-SYMBOLS <fs> TYPE ANY.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount . --- amount as (ansal /100 i.e 1000/100 = 10) 10
endif.
still iam not getting the data for the field bet01
this is the coding i am using
data : wa_p0008 like p0008,
 i0008 like p0008,
 l_v_ANSAL type ANSAL_15,
 l_v_amount type PAD_AMT7S.
FIELD-SYMBOLS <fs> TYPE ANY.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount .
endif.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
please help me as iam still not getting (value in bet 01) when i press enter once i enter value in ansal feild.
regards
shanti.

Why the 2LIS_08TRTK extractor can not get all data

Hello, BW Gurus.
Why the 2LIS_08TRTK and 2LIS_08TRTLP extractors can not get all data. I had used the RSA3 and get 10 registers, when a check at the VTTK table I had 20 registers, I didnt use filters at RSA3, could you help to know what happen o correct it.

Is it because

Shipment documents and their dependent objects (shipment stages as well as shipment items [deliveries in the shipment]) are only extracted into BW when the Shipment completion status has been set.
This is necessary because the numeric values that result from the delivery documents are only established at the time. If the data were already stored earlier in BW, the shipment data would not be updated if the delivery notes were changed in BW.

- from oss note 573470.

Is there a mobile phone that can sync with ical, but does not require a data plan?

Is there a mobile phone that can sync with ical, but does not require a data plan?

Thanks for the reply. I already have this info, but have spent several hours trying to cross reference with the product descriptions and the different carriers websites. I was hoping there was an easier way.
John Maisey wrote:
Hi,
You cakn sync many phones using iSync. See here: http://support.apple.com/kb/ht2824
Best wishes
John M

I am trying to update my MAC to get iCloud on it, prior to the ios7 update. Need help figuring this out!

I am trying to update my MAC to get iCloud on it, prior to the ios7 update. I do have a pc as well, so i can sync it there if needed. any help or suggestions are much appreciated!

beachblondie wrote:
... I am just afraid of losing everything ...
How to BackUp > http://support.apple.com/kb/ht1766
What gets Backed Up
iTunes http://support.apple.com/kb/ht4946
iCloud http://support.apple.com/kb/PH2584

SAP Fiori Purchase Order not getting any data & getting a 404 Error Message

Hi
I have downloaded Purchase Order SAPUI5 code from SAP Fiori server. import it into Eclipse then try to run that Apps/code(SAPUI5) from browser.
1) Not getting any Data.
2) It show 404 Error Message.
3) Its show wrong User Name as Login

Hi Pankaj,
First question :
Are you able to get the data in Fiori ?
Secondly,
You have mentioned as Purchase order, but here you have given snapshot of Purchase requisition app, and you are calling also purchase req app from the browser. Please clarify
If you have mistakenly written PO : If you are still not getting data for Approve Purc req, then check if your RFC connections are proper from Gateway to backend and backend to Gateway.
If RFC is working fine, check the Remote logon, it should be marked as Current user. If its not marked as current user, then it will show some other user.
Regards,
Tejas

Some times my mac not getting shut down, some times my mac not getting shut down

some times my mac not getting shut down, some times my mac not getting shut down
it will show white scree for long time and will not shut down

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Select "system.log" from the file list. Enter "BOOT_TIME" (without the quotes) in the search box. Note the times of the log messages referring to boot times. Now clear the search box and scroll back in the log to the time of the most recent boot when you had the problem. Post the messages logged during the time when you had the problem – the text, please, not a screenshot. For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time. If the problem is a crash or a shutdown hang, post the messages from before the boot time, when the system was about to crash or was failing to shut down.
Edit out excessive repeats and personal information, if any.
If the log doesn't go back far enough in time, scroll down in the Console file list to /private/var/log/system.log.0.bz2. Search the archived log, and if necessary the older ones below them, for the same information.
Step 2
Do the same with kernel.log.
Step 3
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please do not post shutdownStall or hang logs – they're very long and not helpful.

Do not get any data from 0CA_IS_TS_1 and 0CA_IS_TS_2 data source

Hi all,
We are trying to populate cubes(0CATS_C01) and (0CATS_C02) for which data sources are 0CA_IS_TS_1 and 0CA_IS_TS_2 respectively. We activated business content for these data sources. When we run these data sources in RSA3 we do not get any data even though we have data in the repective tables. We applied SAP Note :1586467, which says (Note 1586467 - Extractor 0CA_TS_IS_1 returns no data), Can you please help me out in knowing if we are missing some thing?
Thank you,
Bob.

Hi,
To use this DataSource you must have implemented Support Package SAPKH46C32, or have made the relevant corrections in SAP Note 509592.
Pl check you have required data as mentioned below
When transferring time sheet data to the Business Information Warehouse (BW), you must note the connection between the following data sources:
· CA_TS_IS_1 (Time Sheet Data (Approved))
Documents are written in the SAP R/3 system for Time Sheets with status 30 (approved). The documents log the changes that have been made to data records.
Therefore, the SAP R/3 system can perform a delta update for this data source. The system only transfers newly approved data records and changes that have been made to existing data records. At the same time, the SAP R/3 system notes the date of the last delta transfer.
· CA_TS_IS_2 (Time Sheet Data (Released for approval))
The SAP R/3 system does not write documents for Time Sheet data with status 20 (released for approval). This means that changes made to these data records are not logged.
Therefore, the SAP R/3 system always performs a complete transfer of data records that have been released for approval. The number of data records that need to be transferred usually remains constant because in the period between two transfers not only new data records are added but other data records are also approved. Therefore, system performance is not restricted.
Thanks and regards

New Server - Not Getting Event.Data back

Its a weird problem i'm having. I've setup a brand new server (Original was a shared hosting setup from godaddy).
I'm using my same application
And i'm not getting event.data info back (in XML form)
Here's an example:
private function onUploadCompleteData(event:DataEvent):void {
updateStatus(event.data, _numCurrentUpload - 1);
var x:XML = new XML(event.data.toString()); <---- NOT FIRING
Application.application.upAvatar = "/profile/" + x.name;
Does anyone have any ideas? I was thinking it could be a misconfiguration with my apache settings.
I'm using:
Ubuntu
Apache2
PHP5
CURL
Thanks..

hi,
have you placed a fault event handler on your request to see what error if any is being returned ?
David.

XL Reporter not getting any data

Hi
When I am using XL Composer and generating report using it, I am getting data what the fields I have dragged. Not getting any data when generating same report in organizer from composer except the Title field names. Before I got but now I am not getting.
STEPS Taken
 XL Reporter Composer Tool bar
 Generate
 Generate(Window)(Name: given Sample & checked Generate report then ok)
And having another problem when generating sample reports I am getting data and when editing that report are preparing new with some fields, I am not getting any data.
Example: I have made Edit of Bank Book and placed extra field Document No, saved the report and generated I am not getting any data except titled fields.
 In new report I have taken BP Code and sales Employee I am not getting any data.
Please Can any one help me, It is urgent.
Thanks in Advance.
Urs
Sindhu

If you did not select any "total" field (quantities, totals, etc), XL Reporter will show data only at report composer. It will not work at final XL Report itself.
This is a normal behaviour of XL Reporter, unfortunetaly.
If you are trying to create a simple list of records, I suggest to use Query Generator, combined to PLD in order to get a formatted report.

Cant get iCloud on my mac, cant get iCloud on my mac

on my mac it has mobile me but not iCloud. how do i get icloud on hear instead of mobile me????

You can share Mail, Calenders, and Contacts running Snow Leopard. Based on my experience, I don't recomment syncing Contacts - created a lot of problems with duplicates.
Snow Leopard iCloud - Address and iCal
Snow Leopard iCloud – iCal
Snow Leopard iCloud - Configuring Mail with Mac OS X v10.6 or iOS 4

DataSource 0CRM_SRV_PROCESS_H is not getting the data in infopackage

Hi Masters,
I have to upload the data from the datasources 0CRM_SRV_PROCESS_H and 0CRM_SRV_PROCESS_I into Infopackages, but when i execute the infockage it shows
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
In CRM system when i checked it in RSA3 it is showing the data.
I checked the older posts but i havn't find any answer post. I also checked the SAP note 692195, but it is applicable for 4.0. I am working on 7.0.
Please suggest something so that I can get the data into infopackage.
Thanks and Regards,
Vicky.

Hi Lokesh,
Thanks for your reply.
Actually i am working on such a project where they don't give SAP_ALL authorization to any user. If we need any authorization we need to show them particular SAP note of same version in my case it is CRM 7.0. If you know any note on CRM 7.0 which gives all the authorization objects required or it says we need SAP_ALL authorization please tell me.
It will be very help full for me to get the authorization.
Regards,
Vicky.

ICal on mac not getting iCloud data

Similar Messages

Maybe you are looking for