ICal & Outlook Time Difference

Hi,
When I created & send an iCal invite to my colleagues who are using Outlook in PC, there seems to be a bug in the time.
Let say I put the event time is from 10:00am to 11:00am, but the recipients Outlook PC shown 10:40am - 11:40am.
How come there is a difference, of 40mins?
Appreciate your assistance, thks!

You have to play around and make sure you have daylight savings/time zone/GMT offset etc set correctly. This post http://discussions.apple.com/thread.jspa?messageID=2627433 gives an idea of things to try out.
20" iMac Intel Core Duo 2 GHz   Mac OS X (10.4.7)  

Similar Messages

  • ICal/Outlook time issue.

    When I accept appointments generated from Outlook .ics files, iCal changes the time of the event in the reply email. How do I correct this? The date of the event in iCal is correct, it's only the confirmation to the event generator that is wrong.  I'm always sending apologies and explaining that I indeed have the correct date and time.

    I am having a similar problem:  invitations sent (presumably from outlook), when accepted from my iPad, appear in the calendar with the wrong time zone.
    this actually happens even when the meeting is in the same time zone I'm in:  I am in GMT -5, and even when the meeting is in GMT-5, it defaults to GMT (or, in some instances, PST).  My settings have my time zone set correctly.
    Any help much appreciated.
    PS:  Using iPad original wit iOS5

  • Time differences between ical and iphone

    When syncing ical to iphone i have a time difference of 9 hours. (dates on the iphone are always 9 hours earlier) No matter on which device the entry was made.
    Time zone is set to Berlin, Germany on my iphone as well as on my G5.
    Same thing is happening when syncing the iphone with my google calendar.
    Any suggestions?

    A restore of my iphone solved my problem.

  • I am having multiple issues with syncing my iphone calendar and outlook There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone I mostly enter items on my laptop

    I am having multiple issues with syncing my iphone calendar and outlook calendar on my laptop
    I mostly enter the original items on my laptop
    There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone

    This sounds like an error in Time Zone support. The time zone needs to be the same in Outlook as well as the phone.

  • Calendar time difference

    Hi, I have a problem, when I sync my Nokia 6300 with my Outlook calendar the appointment time gets changed on my phone to an hour earlier somehow. It has only recently started doing this, it was fine before. I would appreciate any suggestions. Many thanks

    check to see that both your computer and your phone are set in your correct time zone. If they are not the same the phone could be trying to make up for the time difference by altering the alarm times by an hour.
    You do not say where you are so I cannot give you your exact time zone.
    Have you removed your battery from your phone recently and had to reset the time perhaps? This might have caused the problem
    iPhone 5 32GB
    MacBook Pro Retina 15" Mac OS X Mountain Lion 10.8.4

  • 3 hour time difference

    I purchased the iphone while out on the west coast and returned home and when I sync my phone to my computer there is a 3 hour time difference from what I have typed on my appointments on the phone to what appears on my icalendar. When I try and correct the time on either device it changes the appointment on the other by the three hours. Oh what to do?

    If you are syncing your iPhone calendar events with iCal, do you have Time Zone Support enabled with iCal, and do you have Time Zone Support enabled with your iPhone?
    If yes, confirm your time zone settings on your Mac at System Preferences > Date & Time under the Time Zone tab.
    And on your iPhone at Settings > Mail > Contacts > Calendars under the Calendars section > Time Zone Support.

  • Restoring iCal from Time Machine

    I accidently deleted my calendars from iCal and then my blank iCal synced to mobileme and my iPhone so I lost everything. When I try to restore my iCal from Time Machine, it initially shows all my calendars when I open iCal, then it syncs to mobileme and I get a blank iCal again.
    Here's what I do:
    1. Quit iCal.
    2. Delete Calendar folder from Home>Library.
    3. Restore Calendar folder from Time Machine using the gear icon and "Restore to ..."
    Then when I open iCal it restores perfectly, then syncs to mobileme and erases again.
    After talking to an apple tech, he suggested going into iCal's preferences and deleting the mac.com and trying the above steps again. That doesn't work. I even tried going into System Preferences>MobileMe>Sync>Advanced>Reset Sync Data to replace info on mobileme with sync info from my computer. That didn't work either.
    What step am I missing to restore my iCal from Time Machine?

    kanagashi,
    You are welcome...thanks for your kind comments.
    I'm still having sync issues with MobileMe though, the "On My Mac" calendars aren't syncing to MobileMe.
    The "On My Mac" calendars will not sync to MobileMe. Did you complete Roger's checklist under the "Reconnect to the internet. Your MobileMe calendars will disappear as before. Now carry out the following process with each of the 'On My Mac' calendars:" paragraph?
    Syncing should be possible after carrying out those steps.

  • How to calculate the % of time difference between different state

    Hi there,
    The below query returns the follwoign outptut. I need to calculate the % of time period that a specific state ( state ex: open or closed or all report )exists.
    I have to find the time difference between the 2 states . How could I do that ?
    The first row shows null for the previous state . How could get actual previous state for the first row?
      SELECT si.station_name,
                    vppstation.avi_control_state_code.STATE_SHORT_NAME,
                    ash.state_id ,
                    lag(ash.state_id) over (order by ash.STATE_EFF_DATE desc) previous_state,
                    TO_NUMBER(TO_CHAR(ash.state_eff_date, 'SSSSS')) "periods in sec",
                    TO_CHAR(ash.state_eff_date, 'dd-mon-yyyy hh24:mi:ss am') "Date"
               from vppstation.avi_state_history ash
    left outer join vppstation.avi_control_state_code
                 on ash.state_id = vppstation.avi_control_state_code.state_id
    LEFT OUTER JOIN vpproadside.stations_installed si  
                 ON ash.station_id = si.station_id               
              where ash.state_eff_date >= to_date('28/02/2010', 'dd/mm/yyyy')
                and ash.state_eff_date <= to_date('03/03/2010', 'dd/mm/yyyy') ;
           group by si.station_name
                         ash.state_id
           order by ash.state_eff_date asc ;
    STATION_NAME                   STATE_SHORT_NAME STATE_ID               PREVIOUS_STATE         periods in sec         Date                   
    IRDNCST02                      Open             1                    NULL                  85166                  01-mar-2010 23:39:26 pm
    IRDNCST02                      All Report       3                      1                      85159                  01-mar-2010 23:39:19 pm
    IRDNCMT01                      Closed           2                      3                      81376                  01-mar-2010 22:36:16 pm
    IRDNCST02                      Open             1                      2                      78723                  01-mar-2010 21:52:03 pm
    IRDNCST02                      All Report       3                      1                      76023                  01-mar-2010 21:07:03 pm
    IRDNCMT01                      Open             1                      3                      55922                  01-mar-2010 15:32:02 pm
    IRDNCMT01                      Closed           2                      1                      54931                  01-mar-2010 15:15:31 pm
    IRDNCHA01                      Closed           2                      2                      41291                  01-mar-2010 11:28:11 am
    IRDNCAS01                      Open             1                      2                      38847                  01-mar-2010 10:47:27 am
    IRDNCAS01                      All Report       3                      1                      37947                  01-mar-2010 10:32:27 am
    IRDNCST02                      Open             1                      3                      35332                  01-mar-2010 09:48:52 am
    IRDNCST02                      All Report       3                      1                      32632                  01-mar-2010 09:03:52 am
    IRDNCST02                      Open             1                      3                      31502                  01-mar-2010 08:45:02 am
    IRDNCST02                      All Report       3                      1                      28802                  01-mar-2010 08:00:02 am
    IRDNCHI01                      Open             1                      3                      25368                  01-mar-2010 07:02:48 am
    IRDNCHI02                      Open             1                      1                      23939                  01-mar-2010 06:38:59 am
    IRDNCMT01                      Open             1                      1                      20696                  01-mar-2010 05:44:56 am
    IRDNCCH02                      Open             1                      1                      13452                  01-mar-2010 03:44:12 am
    Edited by: Indhu Ram on Mar 11, 2010 1:34 PM
    Edited by: Indhu Ram on Mar 11, 2010 2:20 PM

    If you look at the table which is output of the given query , there is column called "STATE_ID" It shows the current state ie open or closed or all report.
    The column 'PREVIOUS_STATE' shows the state before the current state. .In the table in 2nd row in previous_state column there is state_id = 1 (open)which is the state before 'all report state'

  • How to measure time difference between zero crossing of a sine wave and rise time of a pulse on a same graph?

    I have a 50Hz sine wave and a pulse signal on a same graph. The phase difference between two is between 0-90 degrees.
    Now I need to calculate the time difference between (when the sine wave crosses zero volts) and (when the pulse rises). The frequency will stay approximately same for both signals.
    The application is for a three phase generator. In simple words, when the time difference between the zero-crossing of sine wave and the pulse rises increases, that means that the load on the generator has increases.
    I am a beginner user of LabView (version 9, 2009), maybe it is a very simple problem but I've been pulling my hair out for the last few days and coudln't figure anything out. Any help would be greatly appreciated. I am using DAQ USB-6008 to measure these voltages and pulse from the generator and a sensor
    I have attached a jpg (a graph that i just made with excel to explain). The time 't' is what I am trying to measure
    Cheers
    Awais 
    Message Edited by awais.h on 03-30-2010 11:20 PM
    Message Edited by awais.h on 03-30-2010 11:21 PM
    Solved!
    Go to Solution.

    Hi
    Thanks for the code but I'm afraid it won't work. Like you said the probability of choosing a value that is on both graphs may not happen. This is something that I would like the code to do automatically.
    But I did use the previous code posted and made some modifications to it and it seems to work perfectly. Now the next thing is to be able to get just that one value that tells you the first time difference.
    Here is what I get using that code.
    As you can see from the t Values. I only need the one that is highlighted. If there is a way to filter out the rest it would be great.
    I was thinking of a while loop and as soon as the value is higher than 3E-5 it would store the number and stop the loop, but I'm not too familiar with arrays in labview.
    Here is the the code modified.
    As you can see, it wasn't that big of a modification and it still is your code.
    I will keep trying.
    Thanks for the help
    Attachments:
    FinalShockSpeed.vi ‏55 KB

  • Lost connection detection time difference

    Having a problem understanding why a broken JDBC connection is detected under Windows much quicker than it is under Linux.
    I have an process that opens a connection to MSSQL using JDBC, a Stored Procedure is then executed and the result set
    processed, this execute step is repeated every 60 seconds or so. If any exception is thrown then resources are closed, sleep
    for 60 seconds, the connection is reopened (if fails then sleeps and repeats), once reopened the process continues. There is logging throughout
    the above steps.
    On Windows Vista 64bit Sun Java platform the process runs fine, if I deliberately break the connection (stop MSSQL service), the process
    logs a problems within 60 seconds and starts handling the error, when the MSSQL comes back then within 60 seonds the connection is remade
    and the process continues as expected.
    Under Ubuntu 10 64bit both Sun and OpenJDK the process runs fine, until the connectionis broken, as it takes about 17 minutes for the exception to be thrown
    for the broken connection (stopped MSSQL) to be detected, as opposed to under Windows taking seconds. Once detected then the process works as expected, retrying
    and reconnecting as it should.
    The libs and code used are the same the only difference between the windows and linux versions are the logging path parameter, have tried with different versions of Java
    and with different MSSQL JDBC drivers.
    What could be the reason for the time difference in the lost connection detection between Windows and Linux? Any help tips would be most welcome.
    Thanks.

    The connection is only made once and used throughout, it is only closed if there is a problem. This runs absolutely fine with logging for weeks, the execute and processing take millisecondsIt is pointless to keep the connection in that situation. Create it every time.
    Doing that might even fix your problem. But regardless you should still not keep it.
    Have jujst checked the timings and if the db connection is broken the on Linux (Ubuntu) the exception generated by step 4. takes up to 15 minutes 35 seconds to move on to step 7. on Windows though it is instant, there is a log message output prior to the execute statement this outputs then the exeception logged.You have an existing connection.
    Then you attempt a request which I am guess takes 17 minutes to timeout. (That happens because you are testing by stopping the server.)
    That is the problem.
    First verify the connection url. It might have timeout values in it.
    If not then the next most likely cause is that someone changed the OS (not java) TCP timeout values. Bad idea if they did. And the only way to fix is to change them back to something reasonable. You can code around this by using two threads. One that sets a timer and the other that runs the request. If the timer fires then attempt to cancel the request (see the jdbc api.)

  • ICal prints times in front of event entries, I don't want these times entered. How to remove them?

    iCal prints times in front of event entries, I don't want these times entered. How to remove them?

    Go to your Flagged Photos Smrt Album on the Left.
    Command - a will select All
    Then File -> New -> Album
    Regards
    TD

  • I just installed Yosemite.  Notifications Center will not show ICal entries that were on my ICal at time of installation.  How do I get events to show in Notification Center?

    I just installed Yosemite.  Notifications Center will not show ICal entries that were on my ICal at time of installation.  How do I get events to show in Notification Center?

    Submit your feedback requesting this feature directly to Apple using the appropriate link on the Feedback page:
    http://www.apple.com/feedback

  • How to find out time difference between 2 consecutive characters coming in

    Hi
    Data is coming on serial port and m taking this data in a input stream.I need to know the time difdference between consecutive characters.Any ideas?

    What do you mean? If you meassure the time between two characters, you want to calculate how accurate it is? First you would need to find out how accurate the System.currentTimeMillis is on the platform you run on. That may be easy
    long start = System.currentTimeMillis();
    long end;
    while ((end = System.currentTimeMills()) == start);
    long delta = end - start;But sometimes (on win98) it reports 50, other times 60. So its not quite accurate. But you could redo that test a couple of times and take the avg or the max.
    Then if you get a time difference of 0ms between two characters, you know it will be somewhere 0 and 60ms. If you get 60ms between two characters, you know it will be somewhere between 0 and 120 ms. It's +/- delta seconds accurate.
    Would this be a way to calculate the percentage accuracy: 100.0-100.0*delta/(time+delta)
    Still better to meassure the time over more than just 2 characters unless it is a very slow stream.

  • Execution time difference between SELECT & UPDATE statement in JDBC Sender.

    Hi Experts,
    In my scenario, I have used the JDBC Sender Adapter with the SELECT and UPDATE statement.
    Now the problem is in between the execution of Select and update statement, few more entries are coming in the same DB Table.
    So result of this is updation take place for those entries which are not even picked up by the select statement.
    Can we avoid this execution time difference between the SELECT & UPDATE statemet on JDBC Sender side???
    Thanks & Regards
    Jagesh

    Hi
    Use serializable option in additional parameters, now all new entries would also be updated.

  • How to find the date and time difference in InfoPath 2013?

    Hi All,
    My date and time format is like: 2013-12-24T10:47:38 and have three fields Start date, End date and Actual time taken.
    If start date and end date filled then actual time taken field should automatically should fill, for example 2 days 12 hours 48 min 3 sec.
    How to achieve this?

    Hi Sam,
     I believe we had discussed the same issue in the below thread. Can you please refer the below one?
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/d93e16ff-c123-4b36-b60b-60ccd34f6ca7/calculate-time-differences-in-infopath?forum=sharepointcustomizationprevious
    If it's not helping you please let us know
    Sekar - Our life is short, so help others to grow
    Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
    you see a reply being an answer to the question of the thread, click "Mark As Answer

Maybe you are looking for

  • Not opening Adobe when I print to it

    I print to adobe alot from excel and word...However, I do not want adobe to open when I do this.  I just want the document in pdf form so i can e-mail.  How can I tell adobe to not open when I print to it from another program. Thanks for any help.

  • Devfsadm not showing the external storage disk but able to see from OK

    Hi, I have an external storage disk. Solaris 9 is running on E220R Sun server. I am able to view this disk from the OK prompt using probe-scsi-all. I have installed SFS packages for V9 and the patches required also. MPXIO is also enabled on this serv

  • Save as a .pdf file?

    Is it popssible to save a Dreamweaver file as a .pdf document so my proofreader can edit it using Adobe's .pdf commenting tools?

  • Formatting Font in RichTextbox (C#)

    I'm having this line: richTextBox1.Text = richTextBox1.Text + "Patient's Name : " + patient.Name + "\n"; Which fetches the name from my xml file. I want to Color & Bold the name part only in the richtextbox. But I'm not able to do that in my richtext

  • LR2.7, cannot use the Adjustment Brush

    I choose a photo, select Develop module and choose the Adjustment brush. Then select +2 exposure but in only see the Hand/Zoom tools when I move the mouse over the image. How do I get the brush tool to display?