Ical - Printing the Colour Bubbles/Blocks

HI ya,
How does one print Ical so that it prints in full the bubble block colours and not just a thin bar line to the left???
(I can't even get a screen shot because you have the scroll thru)
Cheers
Mistique

jjraabe,
If you go to iCal>Print...>View, you can select "List." Would that be what you are looking for, or do you want to get rid of the calendar grid lines?
If you want to get rid of the calendar grid lines, I do not think that is possible.
;~)

Similar Messages

OfficeJet Pro L7680 not printing the colour red: it comes out as brown

Running Windows XP. OfficeJet Pro L7680. Using HP inks + quality paper.
Model number CB038a
The colour red is printed as a distinct brown. All other colours/shades/tints/alignments etc are absolutely fine.
Have done the obvious: changed cartridges for brand new ones.
Cleaned printheads
Dignostic page: suggests all ok (good printhead health)
The actual quality of print is good in all respects on the test patterns other than the colour red is printed as brown.
Help gratefully received.
I've always used HP printers and this is a new one on me!

Hi wafflycat, if you reckon it's a cartridge issue then best bet is to contact HP phone support for a replacement....
Phone No.s
http://welcome.hp.com/country/us/en/wwcontact_us.html
Cartridge Warranty
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00206040
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

My photosmart 8250 prints the headings & color blocks on the diagnostic pages, but not the text.

My photosmart 8250 suddenly stopped printing ( I have Windows 7). The cartridges have ink & there are no error mssgs. The self-test disgnostic prints the headings, borders & color blocks, but not the text under each heading. I ran the diagnostic utility & it said there were too many print jobs (?) and I cancelled them as directed.I re-ran the test & It said there were no problems found. But it still isn't printing. I went to the control panel and ran THAT diagnostic & it said it found some problem with the USB connection, but that it was resolved. But, it STILL won't print. I tried everything the diagnostic utility suggested - uninstalled and reinstalled the updated software & driver, restarted the computer, etc. and it still won't print.

Hi - Try following the steps in this document. It will walk you through cleaning the rollers, which in many cases is the cause of this type of problem.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

DownloadHelper doesn't allow me the download. The 3 bubbles are rotating, but there is no possibility to activate the download

This plugin was working fine in 3.6, but when I upgraded to 4.0 it does not work. The colour bubbles are dancing (also with youtube) but download is not offered.
I'm thinking of turning back to 3.6.

There is an update (4.9.2) on the versions page to fix the missing drop marker issue.
* https://addons.mozilla.org/en-US/firefox/addon/video-downloadhelper/versions/

Is a colour laser printer the answer?

I have two excellent Canon inkjet printers but I print so infrequently that all the ink is used up in lengthy nozzle cleaning and sooner or later the print head clogs up. Is a colour laser printer the answer? Do the toner or the mechanism suffer from being left unused for long periods? How do printing costs compare? Is the quality adequate for high quality office use (barring pro photo printing)? If so what printer or printer makes can users recommend? thank you.

Bernard Stay wrote:
I assume that I can set up a laser printer to operate wirelessly. This is important as I often print directly from my iPad which requires wifi.
If the printer has built-in WiFi then it would just be a matter of adding it to your wireless router. If the printer only has Ethernet, then you will need to connect its Ethernet port to your wireless router via an Ethernet cable. This may not be ideal depending on the location of your router.
As for printing from the iPad, the printer does not need to have WiFi. In the scenario above, of having the printer connected to the wireless router via Ethernet, you would still be able to print from iOS devices. But to be able to print from all applications on the iPad, the printer should support AirPrint. There are many companies that don't have a AirPrint capable printer but do provide an iOS application for printing. These applications generally limit what other iOS applications you can print from. So the advice is to ensure the printer supports AirPrint.
Note also that you could connect the printer directly to the Mac. This would avoid the issue above with having to locate the printer near the wireless router. And if you install an application like Printopia on the Mac, it will make the printer available to the iPad (providing the Mac is turned on).
Bernard Stay wrote:
By infrequently I meant once or twice a week, no less.
This would be fine for any laser printer, but this time frame should also be okay for the Canon inkjet. In order to prevent printing problems due to bubbles, dust, or ink clogging, print head cleaning is performed before the start of printing. For your reference, with a Canon MP990, the amount used is about 0.24ml for black and 0.26ml for colour. If you power off/on the printer or replace the ink tank (without replacing the print head), 0.44ml of black and 2.45ml of colour (total) is used. If you perform a deep clean or replace the print head, then 1.98ml of black and 2.45ml of colour (total) is used. These figures vary slightly from difference models, but it gives you an estimate of how much ink is used when cleaning is performed.

Change the colour of events in iCal

I need to change the colour of events/appointments in the Mac iCal. I have imported all of my Outlook calendar via google sync and all my appointments are now just one colour. I have my medical appointments coloured in orange so they stand out each week (I have many) and all my personal events a different colour, and my volunteer work a different colour so that I can see at a glance in week view what I am up to. Looking at one week with every appointment in one drab colour is not nice.
I notice that different calendars are different colours, but I dont want separate calendars as I need to sync with google to share the calendar with Android phone and iPad.
Please can you let me know how to turn this feature on. Many thanks.

Click calendars at the bottom of the page the click on the i symbol for info and then you can select the colour you'd like.

My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
Could there may be a setting somewhere that I need to adjust please? I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
<Edited by Host>

Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

How do I get my printer to match the colours of the image as I see it on screen?

How do I get my printer to match the colours of the image as I see it on screen? My HP Office Jet Pro L7680 printer tends to print my images with a bias towards red compared to the image I am seeing on screen with Lightroom 5 using a Mac with Retina 5 screen. Would appreciate any expertise on how to calibrate the printer to the screen

You have two options. The first method costs nothing but is not as accurate and the second means buying hardware and investing some time. The fastest way to get things closer is to download the color profile from the printer manufactures site for the printer and paper combination you are using. Install it on you Mac and relaunch LR. This is best when the paper and printer are both from the same company; in your case, HP. If the paper is not made by HP, you can often find profiles for your paper/printer by going to the paper maker's web site and doing a search for the appropriate profile.
The other alternative is to purchase a piece of hardware such as the ColorMonki which can be used to not only profile your monitor for color balance but also you printer/paper as well as your camera. When all of your devices agree on what color 118,118,118 means, you get the same color from capture to print but this is also an expensive option and there is a lot of time involved in building your own color profiles. The results however, are much more accurate.
Once you have a color profile installed, the next step involves doing soft proofing. Once you have your image looking the way you want it to in LR, open it in the soft proof option. This will show you how your print will look using the color profile for the paper/printer you are using. During the process, you will be shown the print on your screen which may look off. Use the small triangle in the upper-right corner of the histogram to turn on the out-of-gamut warning. This will highlight any parts of your image which contain colors your printer can't handle. Use the rendering intent options to decide how you want these colors handled (relative or perceptual). Check them both and use the one you like best. You can also make additional changes at this point if required before you generate the JPG image. Make sure to save it as a max quality JPG using the sRGP profile. Once saved, you can send this image to your printer or even to a lab as the process is the same.The attached link should get you to a video showing how to use the ColorMunki hardware/software but, more importantly, shows you how to prepare an image for printing (in this case, for a lab) using soft proofing with the color profile created (or downloaded).--Great Color from Your Lab Prints – Every Time! on Vimeo

Printing in list form , appointments ONLY in ical, not the whole month.

Hi there, I have already done a quick scan of the net and I am unable to come up with a solution.
All I want to do is be able to print out a list of appointments (with date etc) that I have made, not in month view, but just the dates with appointments in.
Is there an App to do this? I have found ICalPrint but it wont let me try it as a demo.
Please help, any help would be greatly appreciated.

I just tried this for the first time lastnight and cannot believe how something so simple does not work. I have a calendar just for birthdays because I was working on a new iPhoto calendar. I wanted to print the list of birthdays and dates so I went to Print in iCal and saw the 'Print List' selection and thought that would work great.
I selected 1/1/08 as the start date and then selected for 365 days expecting just a list of upcoming events in the calendar. Instead it wants to print page after page with every date on it for the next year even if there is nothing scheduled for that day. It just prints 'None'. How hard would it be to have it just print what is in your calendar for the next xx days. I think it would be handy to have a list of upcoming events printed out to glance at or mark up.
I am glad I am not the only one that thought this was so simple, yet impossible to do. I hope it gets changed. Maybe with Leopard it will be different.
- James

How can I Print the next 4 or 5 weeks from iCal in month view (not simply complete months)

How can I Print the next 4 or 5 weeks from iCal in month view (not simply complete months).
I'd like to print the next (up an coming) weeks of my calendar from iCal in month view - The idea is to get this information on 1 sheet of A4.. just like the month view.. but as far as i can see the month view only gives you current or next complete months.. The ONLY time this give me the view I want is in the first week of any given month.. the rest of the month part of the print is in the past and not enough of the up and coming weeks are shown?
I can believe the app won't allow you to do this .. am I missing an easy fix.. or has it been rectified in Yosemite .. I'm using mavericks 10.9.5.
Thanks

Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How can I print in black when the colour cartridge is empty

Hi,
I have an HP Photosmart 5510 that I use ONLY for simple black on white printing for work. I have it set to black ink only but today, a wet and cold Sunday night when I really really need the d*mned thing to work because it's month end and I have to send copies of all my worksheets to head office, I get an error message to the effect that it won't allow me to print using the brand spankin' new original HP black cartridge until I buy some totally unwanted colour cartridges to keep it company.
Am I really being held to ransom like this? Are Hewlitt Packard so short of cash that their corportate monolith will falter and fall if I don't buy expensive consumables whose only function is to print in colours I have no wish or need to use?
Am I really unable to use the black print facility on *MY* printer until I've fed yet more cash into the greedy maw of some US blue chip company?
If the answer to any of the above is yes then tomorrow evennig after work I shall have to go to the store where I bought my HP printer and very publically tell them were to shove it and why. I shall seek out a new printer from ANY MANUFACTURER OTHER THAN HP that allows me to print in black only and I shall make it a mission to spread the word.
Of course it's entirely possible that HP have a simple fix that will allow me to use black cartridges only in which case I shall be delighted to continue buying original HP black cartridges on a monthly basis.
On the other hand I do need a reply urgently because as I say, it's Sunday night and this problem has put me hours behind for work tomorrow as it is.
Thanks (I hope).
Andrew

Hi,
Firstly I'd like to say: I'm not working for any computer vendor, both hardware and software. From my understanding, the technology to make those inject printers dictates why we need all inks to print when we only need black.
1. On some printers which ONLY use 2 ink cartridges (black & tri-color) we can print black only if the tri-color cartridge still has ink at least one color
2. For many other printers which have individual color ink cartridges we need all of them to print even we only print black only. Printers may stop during the warming up process.
3. For some printers, we can force them to print black only without ink in one color cartidge but this would more damage than good because this will shorten their lives.
One thing I've mentioned few times. Vendors (all of them) should allow users to SCAN without inks. But as mentioned above, printers may stop during the warming up process and first of all THEY ARE PRINTERS.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Ical Version 5.0.1 (1547.4) change the colour of an exchange calendar

I have ical version Version 5.0.1 (1547.4) and want to change the colour of the exchange calendar (my work calendar). I have read online about selecting the cal and then click get info and change the colour ut this does not seem to work for an exchange calendar.
Any advice would be great

problem still persists regardless of which user you sign in under.
my Imac is
Software Mac OS X Lion 10.7.2 (11C74)
Safe mode did not make a differebnce as well.
I have read something about running an applescript but i dont really know how to do this and was hoping for an easier solution. Plus dont know the numbers for the different colours

Change the colour of message bubbles

Is there a way that I can change the colour of my text bubbles. Or will they stay green.. Or is there a way I can customise the colours?

There is no way to change the colour. If you message another using with an iOS device running iOS 5 or later and you are messaging them from an iOS device running iOS 5 or later it will be sent over Apple's iMessages network and the text bubbles will be blue. Just thought I would share that.
B-rock

How to change the colours of squares in ical

How do I change the colours of squares (that show days) in ical?

How do I change the colours of squares (that show days) in ical?

I have to save as CMYK for print, but the colours are out of whack..

hey all,
I am designing something for a CD cover that is going to be printed at a print shop, They say they want their images in CMYK and prefer it in a PDF or highest quality JPEG....
So I have been working in CMYK, everything looks fine in photoshop, but when I save out to a JPG the whole thing gets dark and colours get horribly over saturated.
here you can see the image on the left is what happens when I save out directly from my CMYK file in photoshop. there is a big loss in detail in the darker areas and colours are over saturated. the image on the right is what I get if I convert to mode>RGB and then save the JPG. .. . .this is what I want it to look like....
my problem is the print shop requests the image in CMYK, but I want them to print like it looks in the RGB version
any help would be greatfully appreciated! Thankyou!
also here are the actual .jpegs as saved from photoshop
the CMYK version:
and the RGB version:
edit: I don't know too much about colour profiles, and the print shop hasn't provided one on their site, so I picked the default one - Working CMYK, U.S WebCoated (SWOP v2)
edit: these are the file formats the printers say they take on their site:
PDF - 300 dpi - (preferred), Tiff, Highest resolution JPG, EPS
I don't really have any experience with the other formats but I presume I would get the same colour results

Thanks all for the replies.
Just to be clear the file is already in CMYK (U.S web coated SWOPv2), I understand now its probably smarter to work in RGB and then convert at the end but hadn't done so in this case.
If I change image mode to RGB (or vice versa) i notice a tiny shift in the colours on my monitor but nothing as dramatic as what im seeing in those CMYK Jpeg/TIFF's.
John Danek -
there are probably more than 20 layers in there, my colour settings should all be default because ive never even looked in there before, but here is a screenshot of the dialogue box
and the bit depth is 8-bits per channel
If I save it out as a CMYK .pdf then it looks fine, presumably because im opening it in Adobe acrobat reader so it can see the embedded profile. So I think this is the problem after all, thanks Chris Cox and gator soup for clearing that up!
I have emailed the printers and asked if they can read my embedded profiles correctly with their software (presumably they can) and asked for them to recommend an ICC colour profile but have yet to hear back from them.

Ical - Printing the Colour Bubbles/Blocks

Similar Messages

Maybe you are looking for