ICal repeating events become invisible if using Exchange 2010

I recently upgraded from Exchange 2007 server to Exchange 2010.
I had PREVIOUSLY been impressed by well iCal under Snow Leopard worked with Exchange Server. Everything was great. But, after upgrading to Exch 2010, many of my repeating calendar items became invisible in iCal.
I did some searching on the Internet, and found I am not alone. My service provider support desk was also able to reproduce on their end.
Steps:
Connect to an Exchange 2010 account using Snow Leopard iCal.
RESULT: All repeating calendar with end dates will be missing.
Workaround: Remove the end date, or use a fixed number of repetitions rather than and end date.
Another Workaround: Get Entourage to sync to Exchange, then get Entourage to sync with iCal. OK, but there seems to be some bugs there too where things don't always sync right.
Since most people use repeating events, Mac users should avoid upgrading to Exchange 2010 for now.
Message was edited by: davidlbangs

It's a time zone issue. checkhttps://discussions.apple.com/message/10108361#10108361

Similar Messages

  • Can i use exchange 2010 in the mail(4.5)?

    Can i use exchange 2010 in the mail（4.5）？
    i can't use exchange 2010 in the mail （4.5），but i can use normally in the mail （3.6）。why？

    Of course you can use your iPhone in the rain but since devices are not waterproof, nobody in their right mind would recommend it. The risk is yours and an out-of-warranty repair might cost more than a few bucks.
    I highly recommend you read this article: http://support.apple.com/kb/ht3302
    And some kind of a protective casing if you insist on using the device in the rain.
    Live long and prosper!

  • When I send e-mail messages with file by using a POP3 in Exchange 2010 I received delivered message with file. How I can disable this functions that file do not include to delivery message. I use Exchange 2010 only local users.

    When I send e-mail messages with file by using a POP3 in Exchange 2010 I received delivered message with file. How I can disable this functions that file do not include to delivery message.  I use Exchange 2010 only local users.

    I think there is not native rule for this, but you could try a transport rule which removes all attachments over a very small file size like 1KB.
    http://blogs.technet.com/b/exchange/archive/2009/05/11/3407435.aspx
    CRM Advisor

  • Is it supported to connect Exchange 2013 Mailbox using Exchange 2010 CAS in Co-existence?

    Hi Team,
    I am in the phase of upgrading Exchange 2010 to 2013, and introduced 4 MBX and 2 CAS of 2013 servers in co-existence.
    Only one production mailbox of 2010 moved to 2013. The owa of the mailbox moved to 2013, is working OK internally coz only internally configured, but when I configure outlook using 2010 settings, it got configured but when I open outlook it doesn't
    open and throws an error of some "cannot open set of folders".
    Is it supported to connect Exchange 2013 Mailbox using Exchange 2010 CAS in Co-existence? because I havnt configured 2013 CAS servers yet.
    Kindly share some KB or tip. Any help is appreciated. Thank You.
    Muhammad Nadeem Ahmed Sr System Support Engineer Premier Systems (Pvt) Ltd T. +9221-2429051 Ext-226 F. +9221-2428777 M. +92300-8262627 Web. www.premier.com.pk

    I'll change Adam's wording slightly - you *MUST* install a CAS 13 server into every site where there is a MBX 13 server.
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Core roles installed on one virtual server for roughly 200-300 mailboxes using Exchange 2010?

    For a customer who is looking at keeping costs down, they are wondering whether setting up a virtualized Exchange 2010 server with all the core roles installed would be possible.  So the mailbox, CAS and hub all on one virtual slice. 
    The customer has around 200-300 mailboxes. 
    I know that its hard to give a guess for sizing, but I was wondering if a 4 core, 16 GB RAM build on Server 2012 would be sufficient, with the storage obvioulsy being SAN.  I know this is dependant upon mailbox size and usage, but I don't have those
    numbers unfortunately.  Would the 4/16 build be sufficient?  Too much?
    Any further information around this would be great.  Thanks.

    Hello,
    I recommend you use Exchange 2010 Server Role Requirements Calculator to design your environment.
    A blog for your reference.
    http://blogs.technet.com/b/exchange/archive/2009/11/09/3408737.aspx
    If you have any feedback on our support, please click
    here
    Cara Chen
    TechNet Community Support

  • Has anybody experienced missing sent emails after updating their iPhone to IOS 5.0?  Mail composed on phone appears to send but is never delivered nor does it show in sent items. Using Exchange 2010. Any thoughts??

    Has anybody experienced missing sent emails after updating their iPhone to IOS 5.0?  Mail composed on phone appears to send but is never delivered nor does it show in sent items. Using Exchange 2010. Any thoughts??

    @Satterp
    Not sure if you were responding to me or OP - my iPhone is on 5.1.  The OP at the time of writing was on 5.0.1.
    Also, the OP and I had setup our Hotmail as an Exchange server (similar to IMAP), not POP3.

  • When adding event in iCal, the event becomes full-day by default. How to change?

    Also, when de-clicking full-day the events becomes timed 10am-6pm. When changing start time, the end time follows with this 6 hr gap. Not the worst problem to deal with in this world, but...still.  Any way of changing this little detail? I.e. to be able to double click the desired day, getting an event that starts with the current time and a 1 hr gap (as with the old version of iCal, that is).
    Cheers

    Also, when de-clicking full-day the events becomes timed 10am-6pm. When changing start time, the end time follows with this 6 hr gap. Not the worst problem to deal with in this world, but...still.  Any way of changing this little detail? I.e. to be able to double click the desired day, getting an event that starts with the current time and a 1 hr gap (as with the old version of iCal, that is).
    Cheers

  • ICal repeat event issues

    I feel like I'm missing something when using the calendar app... When creating a repeat event, the only options are weekly, monthly, yearly... I need to have an event repeat every third Saturday, along with events that require on Tuesday's and thursdays.  Without having to individually type them in, how can I get it to do what I want?

    I tried a few different repeats and they all worked here. One suggestion try a repeat on an event that is not an all day event. Does that make a difference?
    Also try a different calendar, again any change? Finally you should make a new user, log in as that user and try it. This way you can try to isolate it to see if it is something in your environment or if it is system wide.

  • Unable to clear flags in Mail using Exchange 2010

    I am able to flag messages without a problem, but when I try to turn those flags off within a few moments it will sync them back to "flagged."  I basically cannot unflag a flagged message.  Connected to an Exchange 2010 server.  Not having any problems getting or syncing mail.  Activity window is clear and nothing is queued up.
    I see "changing flags" pop up really quick in the Activity window but as soon as it sync's back up with Exchange those flags come right back.
    Help!

    I've found a solution that works for me, although it's a little technical.
    I found that the Envelope Index file in Home/Library/Mail/V2/MailData/ is actually a sqlite3 database.
    the steps I followed were:
    Quit Mail (don't know if this is necessary)
    Open Terminal, and cd to ~/Library/Mail/V2/MailData/
    open the sqlite db using the sqlite3 command line client:
    $> sqlite3 Envelope\ Index
    Now, in the sqlite3 command shell I queried the messages table to see which messages were flagged:
    sqlite> select * from messages where flagged = '1';
    I verified that the one message I couldn't clear was in the result set and then I updated the database and cleared the flag:
    sqlite> update messages set flagged = '0' where flagged = '1';
    Re-start Mail, and voila - flagged messages gone.
    Note: to selectively clear the flags from only certain messages would probably require a more advanced update statement that included some join in the where clause.

  • Use Exchange 2010 Hybrid Edition for SMTP relay

    Thanks guys.
    hmmm.
    I did try and telnet on port 25 to the hybrid and get the welcome, when i enter the mail from command and enter a valid email address, i get "530 5.7.1 Client was not authenticated"
    I have exchange 2003 admin experiance and and learning my way around the 365 environment still
    

    Hi all,
    we recently moved our Exchange 2003 to Office 365 using a Hybrid Exchange 2010 to migrate the users.
    the migration is complete and we have kept the Exchange 2010 Hybrid Edition running to enable us to mail enable new AD users after the DirSync has synchronized the user to the tenant.
    has anyone used this limited version of Exchange as an smtp relay for network devices, copiers etc?
    This topic first appeared in the Spiceworks Community

  • Event ID: 4999 - MSExchange Common - Exchange 2010 SP3

    Hi all,
    I have Exchange 2010 SP3 RU4 and since yesterday without reason (I didn´t patch anything, configure etc.) following error randomly appears in app eventlog:
    Watson report about to be sent for process id: 6000, with parameters: E12, c-RTL-AMD64, 14.03.0151.000, AirSync, MSExchange ActiveSync, Microsoft.Exchange.Data.Storage.GlobalObjectId.IsForeignUid, UnexpectedCondition:NullReferenceException, 54b1,
    14.03.0151.000.
    ErrorReportingEnabled: True
    I´ve tried to find some info but no luck.
    Does anybody know how to fix this?
    Thanks in advance, O.

    Resolved..
    A few days ago I hid some testing resource mailboxes (rooms) in GAL, which were used in Cisco TMSXE (Videoconferencing SW). Then, when I restarted the IIS, these errors appeared, because of Cisco TMSXE couldn´t find the room mailboxes. So I unhide
    them and errors are gone..

  • Outlook 2010 using Exchange 2010 - cannot send this item after updating draft email

    I have a client who has the following setup.
    SBS 2011 server (Exchange 2010) and a Windows 2008 R2 Terminal Server (with Office 2010 SP1 installed).
    This particular user has a Windows XP PC with Office 2010 SP1 installed (joined to SBS 2011 domain).
    This user creates a email at their office on their PC and saves it in draft to continue working on it when they get home.
    At home they RDP into the terminal server and load outlook and start updating their saved (Draft) email.  They then try to send it and the following error pops up.  "Cannot send this item".
    If they try to save the changes they have made it pops up with "The operation failed".
    I have tried various settings all with the same results.
    Office 2010, Office 2010 SP1, Online mode and Cache mode (on the Windows XP PC).
    Any ideas? 

    Hi Rajkumar,
    OK. After further testing I have narrowed it down to the email signature?
    If I save a draft email in Outlook on the Fat client (Windows XP + Office 2010), then go straight into Drafts folder and open the email and add one line of text and try to send or save again it fails.
    If I don't have a signature, it works fine.
    I currently trying to determine what part of the signature it doesn't like (it is quite a large signature, multiple images and a disclaimer etc).  I'm having mixed results - I can remove the signature totally from the draft email and then it will save
    or send fine. 
    Strange that it can save the email to Draft in the 1st place but doesn't like updating it a 2nd time???
    I have also created a new outlook profile (online mode) with the same results.

  • Using Exchange 2010 Edge server as an SMTP gateway without other roles

    I am looking to implement a simple SMTP gateway solution for a few applications to relay emails and hence am not looking at a full fledged Exchange deployment. As SMTP component is no longer available in Windows Server 2012, I would like to know if the Exchange
    2010 Edge role can function as a simple SMTP gateway solution without having the other roles of Exchange 2010 deployed like the CAS, Hub and Mailbox ?
    My requirements from this SMTP gateway solution would be the ability to append disclaimers, relay restrictions based on IP addresses and sender email addresses, and provide both authenticated and unauthenticated relay access.
    Any inputs would be highly appreciated. Thanks in advance.

    Hi again
    I decided to test the scenario - just for fun, and it seems to work. A strange setup :-)
    So you will have to prepare your schema and AD - and create an Exchange organisation.
    Then you will have to assign the receive connector(s) AD permission to relay outside the organisation - by default it can only relay internal, but since your mailsystem is "outside" seen from Exchange - you'll need to do that.
    Is your AD domain the same as your SMTP namespace? Because then you have to make it external relay after you have removed it from the e-mail address policy :-)
    BR
    Steen

  • How to Block send e-mail by telnet using Exchange 2010

    Hi
    I have Exchange 2010 SP3 server (Edge and Database servers).
    When i logon to exchange server: telnet mail.domain.com 25using commands:
    mail from:[email protected]
    rcpt to:[email protected]
    I can send e-mails without password.
    How to block it? What is wrong with this server settings?
    Kind Regards Tomasz

    you can change the receive connector that is listening on port 25 to require authentication removing the anonymous the problem will be every server that sends you email will need to have a password on your server so  you will not receive email
    form anyone unless they have the password configured if you only want to receive email on this server from another trusted server than this is how you do it, otherwise you need to leave anonymous access enabled. Spam appliances sometimes will be the only server
    allowed to send to your exchange server, but the spam appliance will have anonymous access allowed on port 25 so it can get the email. Typically the distribution of port 25 traffic is handled at the firewall and it's either sending port 25 traffic to
    your email server or a spam appliance.

  • ICal Repeat Event Problem

    So i'm having a major problem with iCal in Lion.
    I setup an event that runs an Applescript at 13:00 and set it to repeat every day, it worked perfectly the first day but after that it stopped working....now when it turns 13:00 nothing runs.
    I've tried both running a script and making it an App and opening that but still nothing works.
    Is this a iCal but that everyone is having or is it just me?
    Thank you

    I tried a few different repeats and they all worked here. One suggestion try a repeat on an event that is not an all day event. Does that make a difference?
    Also try a different calendar, again any change? Finally you should make a new user, log in as that user and try it. This way you can try to isolate it to see if it is something in your environment or if it is system wide.

Maybe you are looking for