[iCal Server] Error when importing an .ics file received by e-mail

Hi,
I am setting up an iCal server.
My SL server is member of my Active Directory with an extended schema.
My SL server is also an OD master
My AD users can connect to the iCal server, add events and delegates, send invites to each other without any issue.
However, when I receive an ics file by email, and I try to add it to my agenda (using iCal), I get an error message on my iCal client :
« HTTP/1.1 500 Internal Server Error »
à l’opération CalDAVWriteEntityQueueableOperation.
On the server, in the error.log, the following is generated : http://pastebin.com/YGQdSEqD
On the server, in the access.log, the following is generated : http://pastebin.com/Ki0Gq50M
As you can see here : http://pastebin.com/8rQrZLYV the specified folder exists and the permissions seems correct.
Any idea ?

Similar Messages

500 Server Error when Trying to Download Files

Hi,
I keep getting a 500 server error when trying to download any of the Oracle ORION files: http://www.oracle.com/technology/software/tech/orion/index.html Any ideas? Thank you for your help.
PS. Here's the exact error:
"Server Error
The following error occurred:
[code=SERVER_RESPONSE_RESET] The server response could not be read because of an error. Contact your system administrator.
Please contact the administrator."

Thanks. It seems to be fixed now.

Error when Importing a txt file in FDM 11.1.2

Hi,
I'm getting the following error when I try to import a txt file in FDM. I want to load it in HFM
Error: An error occurred importing the file.
Detail: Data access error
** Begin FDM Runtime Error Log Entry [2010-10-18 13:07:03] **
ERROR:
Code............................................. -2147217900
Description...................................... Data access error.
Procedure........................................ clsImpProcessMgr.fLoadAndProcessFile
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 10836
IDENTIFICATION:
User............................................. admin
Computer Name.................................... M0A1187649-2009
App Name......................................... FDM_ONT
Client App....................................... WebClient
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... orcl
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... OG
Location ID...................................... 749
Location Seg..................................... 3
Category......................................... ACTUAL
Category ID...................................... 13
Period........................................... Mar - 2011
Period ID........................................ 3/31/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False

To provide some clarity here, this resolved the issue for use also. The good news is that it should be relatively easy for anyone with FDM Workbench access to resolve this given the following information from the FDM DBA guide (http://docs.oracle.com/cd/E17236_01/epm.1112/fdm_dba.pdf):
To modify the Oracle Work TablespaceName and Oracle Work Table Index
TableSpaceName configuration settings:
1 Launch Workbench, and log on to the FDM application.
2 Select Tools > Configuration Settings.
3 Select Options > Oracle Work TableSpaceName.
4 In Name, enter the name of the tablespace, and click Save.
5 Select Options > Oracle Work Table Index TableSpaceName.
6 In Name, enter the name you entered in step 4, and click Save.
7 Select Options > Oracle Work Table Bitmap Index Switch, and set the value to Off for Oracle 10g and Oracle 11g.
8 Click Save.
9 Click Close.
Step 7 specifically resolves this issue.

Getting an error when Importing a security file

Hi,
Im struggling to import a security file into planning..this is the error i get
Enter password: Tue Mar 30 09:30:53 SAST 2010 :: Validating the Secfile.txt...
Tue Mar 30 09:30:53 SAST 2010 :: ---------------FILE NOT FOUND EXCEPTION COMING-------
The server is running unix: I'm running the command from the directory where the ImportSecurity.sh utility is...I have also copied the secFlie.txt file into the same directory. But still get the same error.

There is a slight issue with the unix versions
If you use the exportsecurity utility it will create a file called :- secFile.txt
When you use the importsecurity utility it looks for a file called :- Secfile.txt
As it is case sensitive you have to update the exported secFile.txt
Cheers
John
http://john-goodwin.blogspot.com/

Error: When importing the WSDL file

Hi Experts,
I am getting the following error when i try to import the webservice.
This is my webserive, I am trying to import the same, i trie in both the methods, WS and WS-Depreceated.
http://xxx/ws/service.asmx?WSDL
Please let me know, how to resolve the same.
Error Thu Dec 31 14:47:10 EET 2009 Dec 31, 2009 2:47:10 PM          com.sap.ide.webdynpro.ui.service.ServicesUI          [Thread[main,5,main]] Error: Internal error
   Plugin name: Web Dynpro Model Editor
   Plugin ID : com.sap.ide.webdynpro.modeleditor
   Class      : com.sap.ide.webdynpro.modeleditor.wizards.model.creation.PageRenameWS
   Method     : loadNameSpacesAndModelClasses
   Message    : Cannot load NameSpaces and ModelClasses
Class Path: C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.cmi_1.0.0/_cmi_api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.exception_2.0.0/lib/exception.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/boot.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/iq-lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/util.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/tc_sec_wssec_lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.runtime_2.0.0/lib/SapDictionaryTypesRuntime.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.services_2.0.0/lib/SapDictionaryTypeServices.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/logging.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/loggingStandard.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/jARM.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.xmltoolkit_2.0.0/lib/sapxmltoolkit.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/activation.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxm-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/saaj-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxrpc-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jnet.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jsse.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/mail.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.webdynpro.model.webservice_2.0.0/lib/_webdynpro_model_webservice.jar;
Thanks & Regards,
Palani

Hi Palani,
error is coz of build path error, if you are using old prjct then import the file in java build path.
frm the error posted by you, error are coming frm the standard eclipse IDE folder i.e. :-C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.cmi_1.0.0/_cmi_api.jar;.
Pls go to the respective path and try to pick the jar file frm the project build path and rebuild the project.
If not, den
May be NWDS got corrupted, reinstall the NWDS....:)
Hope this may help you..
Deepak!!!

Fatal error when importing Photoshop PSD files in Captivate 5.5 MAC

Hello,
I'm running Captivate 5.5 Trial on MAC OS X Snow Leopard. All of a sudden one of my PSD files started causing a fatal error when I try to import it into Captivate.
I tried resaving both captivate and PSD file, saving them under different names, restarting, etc.
What I get is "Fatal error occured, ... Restart Adobe Captivate..."
I've tried removing Preferences folder as well as clearing the cache.
Any help would be greatly appreciated...
Thanks

You can only open Cp 5.5 files with Cp 5.5.
There is no solution for opening these files in Cp 5 version.
May I ask, why did you not get a license of Cp 5.5? It's been around for over 6 months now.

Server error when importing from FB

Hey,
Cant import contacts from FB. Getting the server error message, please try again later.
Tried turning off login approvals and enabling skypeworks on FB.
Any other solution?

hello Gordon,
Thanks for your answer. that would have probaly fix the issue
my techs fixed the issue by doing the 2 following thinks, i don't know if only one of them would have fix it.
1. in the boot.ini file there was a /3G in the end, restricting the memory to 1G for the OS. The tech deleted it.
2. in management studio, the technician changed the memory reserved for sql from 9/12 to 14/16Gb
there was probably not enough RAM available for the import.
since that change it works well.
Thanks again!
Christophe

Error when importing a .fxp file

When I try to import a .fxp file, I get an error:
An error occured when attempting to open the FXP file. Verify if any other applications are using this file or if the destination directory has writer permissions.
Thank you for any help you can provide.

This can happen when Flash Builder is unable to open the FXP file or its a bad archive. Can you open your workspace folder, look for .metadata folder and post the information in the .log file?

File Error when importing stock footage file

I just ordered a quicktime stock footage clip and when I try to import it I get this message.
! File Error: 1 file(s) recognized, 0 access denied, 1 unknown.
I imported 3 other files from the same place, same size, etc., fine, but then this came up. Any info would be so helpful because this is for a project due tomorrow.

Click once on the clip. Now hit APPLE-I to GET INFO (also in FILE menu). This will tell you a lot of things, including what the codec of the clip is, and, at the bottom, what the PRIVELAGES are. Read/write, read only...stuff like that.
Does the clip open in QUicktime?
Shane

Error when importing Sample OBIEE Files using the IMPDP command

I'm trying to follow the lengthy directions to create the Sample App, and I'm on page 7 of this installation guide:
http://www.oracle.com/technetwork/middleware/bi-foundation/downloads/sampleapp107-deploymentguide-435786.pdf]description
I've successfully completed the first 3 bullets on the page and I'm at the step of using the 'impdp' command to import data from the dmp file. The customized command I'm using is as follows:
impdp sys/password@Eagle as sysdba directory=datapumpdir dumpfile=SASchemas.dmp version=11.2.0.0.0 schemas=BISAMPLE,OBIEE_NAVTEQ,BIFOD,BIBPM,DEV_ODI_REPO,ODI_STAGING LOGFILE=SASchemas_imp.log
(Note that I'm using my actual password in place of 'password')
Unfortunately, I keep getting the error: unknown command beginning "impdp sys/..." rest of line ignored'
Why is this not working? I've checked the syntax very carefully.
Thanks, John

Whoops I was running this from the SQL Prompt and not the Dos Prompt... Never mind.

Error when importing dae (Collada) file

I am trying to add a 3D widget to an ibook in iBooks Author, but the Collada .dae 3D file won't work.
I've tried with 2 different dae files coming from Maya :
.1/ Maya => .fbx => FBXConverterUI => .dae
.2/ Maya => .dae
I don't know anything about 3D and got those files from our engineering department.
What Maya export settings would be necessary to obtain a .dae file compatible with iBooks Author ?

Having a similar issue. Importing a certain Collada file is crashing the program. Only happens to a specific object, because I've tried others and they embed fine.

BYMONTHDAY is causing the error while opening the ics file in outlook when event is exported from SharePoint Calendar

Hi All,
I am trying to parse the SharePoint recurrence data to get the RRULE for the ics file the RRULE parsed works fine for Yearly and Daily but it causes error when opening the ics file for the Monthly and
weekly recurrence recurrence. I have opened the ics file in the notepad and observed that the BYDAY and BYMONTHDAY causes the problem. If I remove the tag the file opens fine but with wrong recurrence pattern.
Any help will be appreciated.
Regards
Ajeet
Ajeet

Ajeet,
I see that this is an extremely old post, but I thought I would refresh it with a bit more info.
I wish I had found this post a few days ago. I realized the same thing as well. I don't quite understand the reasoning behind requiring the by day date must be the same as the event date. Another thing with rrecurrence is that if
you pick a day of the week for a recurrence (i.e. Friday), then the start date must also occur on a Friday (I am just casting it as the first Friday of the month).
I have come into this same issue with the BYMONTHDAY. I am currently working on trying to configure an .ICS file to allow for multiple monthly recurrences, but it appears Outlook does not support multiple days within an event (determined by trying
to create an even in Outlook and picking the recurrence option). It seems that you are only allowed to have an event on (for example) every Friday of each month, or the (x) day of each month. You cannot set any other occurrences of any other day
within the same ICS file. Hopefully someone else will find this information useful.
Cheers,
Tracy

Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout).

Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout). It is as if the server has decided that the client has timed out during the file upload. The default setting is 30 seconds for AcceptTimeout in the magnus.conf file. This should be ample to get the file across, even increasing this to 2 minutes just produces the same error after 2 minutes. Any help appreciated. Apologies if this is not the correct forum for this, I couldn't see one for iPlanet and Web, many thanks, Kieran.

Hi,
You didnt mention which version of IWS. follow these steps.
(1)Goto Web Server Administration Server, select the server you want to manage.
(2)Select Preference >> Perfomance Tuning.
(3)set HTTP Persistent Connection Timeout to your choice (eg 180 sec for three minutes)
(4) Apply changes and restart the server.
*Setting the timeout to a lower value, however, may prevent the transfer of large files as timeout does not refer to the time that the connection has been idle. For example, if you are using a 2400 baud modem, and the request timeout is set to 180 seconds, then the maximum file size that can be transferred before the connection is closed is 432000 bits (2400 multiplied by 180)
Regards
T.Raghulan
[email protected]

I am getting an error ORA-39143 when importing a dump file

I get ORA-39143: dump file "c:\oraload\expdat.dmp" may be an original export dump file
when importing a dump file created by 9.2 exp into 10.2 database using impdp
I need to use the impdp utility with the table_exists_action option which doesn't appear to exist in imp
What is the proper mix of versions/flags/options to export from a 9.2 database and import into an existing 10.2 database while replacing existing data?
thanks

well its on the link i provided
"When tables are manually created before data is imported, the CREATE TABLE statement in the export dump file will fail because the table already exists. To avoid this failure and continue loading data into the table, set the import parameter IGNORE=y. Otherwise, no data will be loaded into the table because of the table creation error."
original import tries to append (insert)
there is no parameter here like table_exists_action=truncate/replace
1. drop all the tables (dynamic sql), so there will be no errors because of already existent tables
or
2. truncate all the tables (dynamic sql) + use IGNORE=Y
(or
3. drop the whole schema in target database, recreate it, then do the import)

Illustrator shows BG error when importing ai files made in Flash

Hello Everyone!
I've been using Flash for a couple of years now... I use it
mostly for designing fashion graphics (!!!). I know that
Illustrator is excellect for creating artwork, but I am a big Flash
fan and can't help it :) Of course, I have to use Illustrator from
time to time which makes it a bit tricky when importing modified
Flash files.
I export Flash files as AI ones, but encounter numerous
errors while opening such files in Illustrator. I think the problem
is with the Color settings. Flash uses RGB, and CMYK is
Illustrator's default settings. When I try to export a graphic
symbol (with layers, groups of objects and simple shapes) from
Flash Professional as an AI file, it always exports as Illustrator
6.0 version (wonder why)... Then I try to open this file in
Illustrator CS2 and always get a "BG" error message which is
similar to this one:
Can't open illustration. The illustration doesn't have the
correct number of operands for an operator.
Offending operator: "Bg"
Contex:
Bb
0000 Bh
1.0.0.000819.20.....etc. (lots of figures)...Bg
So after getting such a message and pressing "OK" there are 2
possible results:
1. The program (Illustrator CS2) opens a blank artboard
(stage) with absolutely NO objects or symbols on it.
2. The program opens an incomplete graphic on the artboard
(stage) with many missing objects and shapes (say, if I exported a
graphic with 2 layers, the top layer will be missing).
Unfortunately, these are the most common results....Though a
few days ago I hkept several AI files open and tried to export an
AI file made in Flash. To my greatest surprise Illustrator could
open the file with absolutely everything I exported from Flash!!!
Except for Bitmap fills, of course....But everything else was just
perfect! I was amazed no end!
Like an idiot I didn't save the file, and the next day I
spent 2 hours trying to get the same result...which I didn't. Never
did since then...Though I used the same graphic over and over...
So my question is...What settings should I have in order to
be able to open AI files exported from Flash? If I got it once, it
means it is possible to open such files...
I would greatly appreciate if anybody could help me find a
way out of this situation. I have to use Illustrator more often
now, and I need my artwork to be convered to AI files without
significant modifications or corrections... Is it doable?
Thank you so much in advance!!
Ella

Did you ever find a solution to this?
I need to export characters from Flash files to use in Illustrator, but I keep getting "offending operator bg" messages.

[iCal Server] Error when importing an .ics file received by e-mail

Similar Messages

Maybe you are looking for