ICal Server Maverick, cannot see attachment

Hi all,
Wondering if anyone can help me with this iCal issues, I recently upgraded my Mountain lion server to maverick server and all service all running fine except for Calendar.
in the new maverick server my calendar cannot add attachment on the event or it can add local 1 attachment and cannot get sync to the same user on the different computer.
here are the error I got when I want to add attachment
In Mountain lion server there are settings to adjust this,
one is the calendar:MaxResourceSize and the other is calendar:UserQuota
and both options are not valid anymore when we run serveradmin settings calendar.
Please advise whre we can change these values.
Thank you
Jon hadi

ok.. so..
riddle me this:
why did this issue spontaneously resolve itself?
have been testing and analyzing for over a week...
one account started working yesterday.
I tested the other account this morning, it didn't work on client computer.
set up the caldav account on my computer, tested, it worked.
went back to client computer, tested, it worked.
not going to complain, but am curious as to the cause and solution...

Similar Messages

Project Server 2013 - Cannot see project schedule in PWA

Project Server 2013 and Project Pro 2013
I have admin authority but for some of the projects loaded to the server, and published, i cannot see the Schedule option in the left frame. At least on project has this option available but several others do not. For the projects where I can't see the schedules:
- Some of these projects were created with imported MPP files from Project 2010, and imported using the wizard,
- Some were created with imported XML files from Project 2010, and imported using the wizard
- Some were created with Project Pro 2013 and saved, published to the P13 server.
Are there some obvious things that I should check as a new admin to this version of Project Server? I'm stumped.
For all of the above projects (with the issue or not) I can succesfully see everything in Project Professional 2013, and everything seems to function normally in the publish process.

Hi,
the first thing to check would be the EPT (Enterprise Project Type) of those projects. Go to server settings, Enterprise Project Types, select the appropriate project type and ensure that the Schedule page is on the left side of the section "New Project
Page/Project Detail Pages".
Hope this helps,
Guillaume Rouyre, MBA, MVP, MCP |

I cannot see attachment in mail box iOS 5,

While I see inbox of my mail, I can see there is a mail with an attachment but when I opened the same mail I cannot see the attachment I scrol down and seen whole mail I cannot find where it is.. Please help

Back up all data.
Quit Safari. In the Finder, select Go ▹ Go to Folder... from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Cannot See Attachment in Yahoo! Mail in mac mail software

Hi guys,
Mac mail is driving me crazy. I tried to send myself attachment email from hotmail to my gmail and yahoo mail. When i opened mac mail, i could see the attachment in gmail but not Yahoo! mail. Why? Is there any solution to fix this world biggest problem that i am having at the moment?

That is one of the many reasons Apple is just a tour system with little practical use I today's buss world and data. To do a basic function you have to buy adult apps.

ICal Server Alert/cannot dismiss

I had a reminder in iCal that had a significant amount of text in its notes field. I decided that I would prefer it to be a calendar event so I highlighted it, copied it, and as I have done in the past, clicked on the day and pasted. iCal came back with "The server responded with an error". Then it displays the text of the event which goes off the bottom of the screen. So, if there is a dismiss or delete or any other information even about the particular error, its below th ebottom of the screen.
And, iCal seems locked up. Regardless of the key hit, it just responds with a beep. I can't dismiss this event, I can' do anything with iCal at all. All menu commands are grayed out, I can't even quit it, I have to force quit. I have done that as well as totally restarted the mac and the same thing occurs, it comes up immediately displaying the same thing and I am stuck there.
Thanks!

There is a MUCH simpler solution if you have a dongle to connect to TV or 2nd screen. If you do, just drag iCal to the bigger screen and find the buttons that ask if you'd like to proceed off line, and click it, and all is well again. Then in future, don't drop things on your monthly calander that are too large, use week or day, and if screws up also, again, then do as above..

Lync Server 2013 cannot see people from Internet

Hello All,
When i want to find users from our domain (Internet) and send message i cant do this. I want to find this address:
[email protected]
Picture below present error. my address [email protected]
What i need to configure to corretly connect with other people?
Best Regards
Łukasz Cholewa

This looks similar to the error that is presented when you attempt to send a message to a non federated domain/user. As the others have stated without this federation this is no way that this message can make it to the user.
Conversely you can get a simlarly worded error message if you are not using the Primary address assigned to the user hence it can't be resolved. Example:
Exchange user Joe Bloggs has
primary Email address [email protected]
Secondary Email [email protected]
SIP [email protected]
The SIP address [email protected] then becomes the Lync sign in adress but in order to send a message to the user you need to send it to [email protected]
Hope this helps. Apologies if I am telling you how to suck eggs.

New update mac can't play vimeo can't play embedded mp3 can't see attach line in hotmail just a big mess

See above. mac 10.6.8 latest firefox just a terrible mess cannot see
"Attach" line in hotmail email replies so cannot attach files. Cannot see photos in "slideshow" format in hotmail. Cannot see embedded Mp3 files (appear for 1 second then gone!). Cannot play Vimeo
video-drags and does not load and sometimes no sound.
All this was perfect before!! What a mess!!

You are posting in the wrong forum, You should ask your questions here..
(However, just to say that QT Pro comes with the FCP 7 installation; you shouldn;t have to buy a license.)
Russ

Cannot see the USB printer attached to my TC (Mac Air, Maverick, Air - TC via ethernet)

I cannot see the USB printer I attached to my Time Capsule's USB port. I am using a Mac Air, with Maverick OS, and connecting between my Mac and the TC via an ethernet link. Suggestions?

Not sure what you mean by "see" the USB printer.
If you simply plugged the printer in to the Time Capsule, it will not be "seen" by anything.
You won't "see" the printer until you use System Preferences > Print & Scan on both of your Macs to "Add" the printer. Did you do this for both Macs?

10.5.8 iCal cannot see CalDAV events from SL iCal server

I posed this on the iCal discussions but receive no response. I would appreciate hearing from anyone that is successfully using iCal 3 with SL Server.
I'm running SL iCal Server.
I can add and interact with CalDav User and Group Calendars on all SL client machines, Web Calendars and PC's (Sunbird) .
I can do the same with my User Calendars my iPhone.
I can add User and Group Calendars to 10.5.8 iCal clients but I cannot see any Events posted from any other source. If I add an Event in Leopard/iCal 3.0.8, that Event shows up in all other devices that share the Calendar, except other 10.5.8 machines.
Are any of you having success?

Wow, you've gotten a lot further than I have.
I can't, for the life of me, figure out how to get Sunbird to work with the iCal Server on my Snow Leopard Server install.
I've tried two ways.
First, the way described in the Getting Started manual, following a URL pattern like this for each user:
http://myserver.example.com:8008/calendars/users/usershortname/calendar/
I set it up a CalDAV calendar.
It asks me for a user name and password, which I enter, but then in the Sunbird interface I get a yellow alert triangle that says, "The calendar calendarName is momentarily not available."
I've also set it up by borrowing the Server path string from iCal (which works fine). I simply add that to the root of my server's DNS name, like so:
http://myserver.example.com/principals/_uids_/0C2A72EF-186E-470F-BB98-A1EE49C7D597/
I get asked for authentication again, but again end up with a yellow triangle and no loaded calendar.
I've checked my Airport Extreme, and it has the iCal ports open (8008 and 8443). The iCal Server is set up fine.
I can see activity in the iCal Server logs from the Sunbird client on Windows, but I have no idea what any of that information means, so it's not particularly helpful.
How did you (or anyone else) get Sunbird working?

ICal Server - 2 users out of many cannot see availability

Hi..
There seems to be a strange issue with 2 users out of many in my configuration.
I have a server running OS X Server 10.6.6 with iCal Server (among other services - EMail, OD, etc) configured.
There are several (50+) users configured in WGM.
Basic Calendar operation...
- Connect (via caldav) to the iCal Server with iCal, or using the Web interface
- create a new event
- add invitees, or one of the configured locations
- view the 'availability' of the invitees or locations
.. works as advertised, showing checkmark or whatever for the person or location, as well as your own 'work times' as configured in iCal preferences...
.. except for 2 of the users.
The name / location autocomplete works as expected.
The name of the person or location is displayed normally, but there is an exclamation mark - ! - beside the name.
There is no display of the busy times or availability in the panel provided.
Their own 'work times' (configured on the account information preferences window) are not shown.
(their availability is shown when other users invite and check)
The invitation for the event that they create is sent to the other user, but when the request is accepted, there is no event in the other calendar, and no indication on their event that the user had accepted.
I have gone thru the user's settings in WGM, compared them to other 'functioning' usernames, and found nothing that yells 'fix-me'.
It is not a client side issue, as I have created the iCal caldav connection on other computers, used the web interface from other computers, (where it works for other users).
The users were all created manually, following the same process, with the same basic information entered.
These 2 specific users were created several minutes apart, are not sequential in the UIDs.
I do not wish to delete and recreate these users, for various reasons...
(as a last resort, may have to...)
so....
does ANYone have any suggestions or ideas where to look?
thanks...

ok.. so..
riddle me this:
why did this issue spontaneously resolve itself?
have been testing and analyzing for over a week...
one account started working yesterday.
I tested the other account this morning, it didn't work on client computer.
set up the caldav account on my computer, tested, it worked.
went back to client computer, tested, it worked.
not going to complain, but am curious as to the cause and solution...

Cannot see new SQL 2008 R2 Express instance on Small Business Server 2011!

Hi,
As it is stated on the subject line, I'm having a problem after I did a new install of SQL 2008 R2 Express and put a new instance on SBS 2011.
I'm developing a new program using SQL 2008 in C# and VB.Net. I have SQL 2008 R2 Express installed on my computer called "MSQL8R2EDATA" on my PC. Now I need to deploy it on SBS 2011 so I can do some testing on other workstations.
I'm currently running Windows 7, 64 bit, and it's named STEVE-PC. The SBS 2011 is named SERVER1, and it's 64 bit as well.
After installation on SERVER1 (SBS 2011), I then fired up SQL Server Configuration Manager and enabled Named Pipes, TCP/IP, and VIA.
After I've completed the SQL Configuration on SERVER1, I went back on my PC (STEVE-PC) and I tried to use Management Studio to connect to the new instance MSQL8R2EDATA on SBS 2011, only problem is, I only see the computer name, not the new instance
I've installed.
Back on SBS 2011 (SERVER1), I've verified that all the protocols are enabled, and the SQL Server Browser is automatically loaded and currently running, as well the MSQL8R2EDATA instance is automatically loaded and running, yet I still cannot see
it from my PC (STEVE-PC). I even switched from dynamic ports to a static port of 64719 (that was what the MSQL8R2EDATA was listening on that port when it was dynamic), and then added new rules to the Windows Firewall for program of the SQLSERVR.EXE, and
for UDP and TCP for port 64719 to "Allow All Connections" for Domain, Private, and Public; yet I still cannot connect SERVER1\MSQL8R2EDATA. I even disabled the firewall and then trying to connect once again to SBS 2001 and it still fails.
In case you're wondering, I left it on port 64719 since there are other active SQL Servers on SBS 2011 (SharePoint, SBSMonitoring, and ACT7).
Interestingly, when I run Management Studio on SBS 2011, I can see STEVE-PC\MSQL8R2EDATA and I'm able to log in and connect to it.
So what's going on here?!? Why am I able to connect to STEVE-PC which is Windows 7 64 from SBS 2011 (SERVER1), but I cannot connect from my computer to that instance on SBS 2011??
I really could use some big time help on this.
EDIT: Sorry for the confusion, but on the Windows Firewall (WF.msc), I did add new rules for incoming connections on:
Program incoming connections to SQLSERVR.EXE
TCP Port 64719
UDP Port 64719
EDIT: To further assist, I have Management Studio installed on the SBS 2011, and I can locally log in and connect to the MSQL8R2DATA on SERVER1 with success. I even tried tcp:SERVER1\MSQL8R2DATA and again it is successful log-in and connection.
Thanks in advance!
Steve

Hi,
Thanks for the response, but I have a question:
Installing SQL Express or SQL Server is not recommended on SBS
2011 because it is a DC, however technically it will work.
I'm a newbie when it comes to SBS 2011 and I'm taking a crash course on the subject. Can you explain to me what you mean by "DC"? Also, why
isn't recommended to install a new instance on SBS 2011?
As I also stated, I've added "New Rules" to the Windows Firewall to allow incoming connections on port 64719 for both TCP and UDP, and I also allowed incoming connections for SQLSERVR.EXE but no joy to connect to the SERVER1\MSQL8R2EDATA.
And yes, I can log-in and connect locally on SERVER1 using Management Studio with success. I even used tcp:SERVER1\MSQL8R2EDATA with the same success. It's my workstation STEVE-PC that fails. If that fails, then the rest of the workstations are going to fail.
Are you suggesting that I put the SQL Server 2008 Express on another workstation and just allow to to be
accessed that way?

Cannot see or edit time of events in iCal

I cannot see or edit times in iCal any longer, only dates. This affects only one user, so I guess that there is a corrupted user-specific resource file somewhere that I could try renaming/deleting. Does anyone have any ideas?
I believe that this condition was triggered by creating an iCal event from Mail.
More details and a screenshot at http://forums.macrumors.com/showpost.php?p=8110912&postcount=10
Thanks for any hints/suggestions.

Eventually found in System Preferences -> International -> Formats that my region was set to "Custom". I have no idea how this happened - I certainly never set this directly through system preferences.
I selected "United Kingdom" as my region, and the times showed up in iCal once again.

New install Express on Win 8 can see the Server name but cannot see the instance

I am doing this over the phone with a client who is not sure what he is doing we have installed Ok the folders exist and we have enabled TCP/IP
The instance is MSSQLServer when we try to connect all we get is 'ComputerName' I am expecting 'ComputerName \MSSQLServer'
The user does not have administrator rights and he installed SQL Server without the administrator (I think, I am not sure he knows)
I am looking for clues as to what may cause the instance name to not appear
thanks in advance
jnc

Thanks, that is useful but the list of instances just matches the details in SQL Configuration manager
What I need is to understand why, if the server is listed and is running it is not visible when we try to connect
jnc
Hi jnc,
Could you please verify that if the instance name is not listed in “Server name” drop-down list of SQL Server Management Studio (SSMS)? If so, does the instance list in the Local Servers tab in the “Browse for Servers” dialog?
If you cannot see the express instance in the Local Servers tab in the “Browse for Servers” dialog, the reason may due to SQL Server cannot get the appropriate registry entry information in the System Registry (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft
SQL Server\Instance Names).
To work around this issue, you can manually input the instance name which will be show in the Local Servers tab. Also make sure that right click on SSMS and then choose “Run As Administrator” to start it.
However, if the express instance is listed in the Local Servers tab in the “Browse for Servers” dialog, but not in the “Server name” drop-down list. Then if you have never connected with the instance name before, its entry will not listed in the drop-downlist.
Or if you have connected to server with a wrong instance name, you cannot see its entry the next time.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Folio is uploaded in the server but I cannot see it in my Adobe Viewer

My folio is uploaded in the server but I cannot see it in my Adobe Viewer in my iPad, any idea guys how to be able to see it in my Viewer?
Thanks.

There are some bugs that can cause this issue. If you are adding long, smooth scrolling pages (ie 1024x3000) and performing a "New" to add the page from the Folio Builder Panel versus using the "Import" command, this issue can be caused.
As the previous posted said, you need to either have all horizontal, all vertical, or all horizontal and all vertical pages. You cannot have a mix of both. If there is a fundamental error with your folio, it iwll not be available in the viewer.

I have problem in osx 10.8 i cannot see the encoding option while connecting to the my pc server ?

MR.Eric please help ?
i have problem in osx 10.8 i cannot see the encoding option while connecting to the my pc server ?
this option was in osx 10.6 see it here
because if i create any file in Arabic name from osx 10.8 the others old mac os see it only in unreadable letters ?
please help
thanks

Aw geez, they sure have messed up OSX.
Do you have a backup of 10.8.2?
Maybe...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

ICal Server Maverick, cannot see attachment

Similar Messages

Maybe you are looking for