ICal 'Show time in month view' Month view missing text!

Hi I hope you can help me!
Since syncing to .mac last week my calendar has developed a problem which is happening on both of my Macs.
Some of my entries and particular words are not displaying properly when I enable 'Show time in month view'. Words at the end of the entries are missing! (they are fine with the times disabled). Can someone please offer an insight into this as I just bought my Mac and use it for my business.
Thanks in advance.
Aaron

I have the same problem. I want to print the month view like it was in my older version of Ical and it won't do it. I want to print what I see.

Similar Messages

HT2513 my iCal shows events in the "month" view but not in the "week" view? why is that?

my iCal shows events in the "month" view but not in the "week" view? why is that? doesnt sync automatically all the time only sometimes

my iCal shows events in the "month" view but not in the "week" view? why is that? doesnt sync automatically all the time only sometimes

Does calendar month view show times

I'm sure I'm not going crazy but I could have sworn that, until late last night, my iPad 2's calendar when in month view showed event times. Similar to what you see when you check the "show times in month view" box when in iCal. I am pretty sure that that function was on my iPad 2 prior to my downloading iTunes 10.3.1 beta because I keep my iPad near the kitchen phone so that we can 'check the calendar.' Now it is not there. The folks at MME support didn't have an iPad to check and they suggested that I go to a local Apple store and see if the ones in the store had this function. I did and they did not.
I spoke with a genius at the Apple Store and he couldn't verify whether that was ever a function of iOS on the iPad. I did tell him that my iPad had been having some strange things happen on the display when I activated the calendar on the iPad. Events would appear, disappear, then reappear sort of in an wave. I am not sure as to the timing of this as to whether it was pre iTunes 10.3.1 beta or after I installed it.
HELP! Was I just seeing things? Or was it there and now gone?
G-N

Thanks for the wild and crazy ideas.
I did remove any events that span midnight and it did not help.
I looked at the DbFixit program. Since it corrects problems in the Palm and not in Palm Desktop I believe it is not relevant. The reason I belive the palm device is not involved is because of the following test:
I removed all previous Palm Desktop versions
I removed all registery entries for both Palm, PalmOne, and the USB (as specified by a chat session with Palm)
I removed all data directories including \Program Files\PalmOne, \Program Files\Palm, and \Palm
I removed all instances of data in the Documents directory
I did a cold boot of the computer
then...
I did a fresh install of Palm Desktop
I typed in a year's worth of data
I did not sync or otherwise connect a palm to the system
I selected month view
The system crashed!
I believe this takes the Palm device completely out of the loop. This problem occurs when typing data in Palm Desktop from the keyboard.
I appreciate any ideas, and will follow up on them.
Thanks again
Jack Cornelius
Since no Palm was involved, the corruption must have occured in the Palm Desktop program itself.
Post relates to: Tungsten E2

Show times in month view?

Hey all! Just made the switch from Outlook to iCal and am wondering when you're in the month view if you can have the individual entries show the time. Thanks so much!

hmmm4321,
Welcome to Apple Discussions.
It seems that iCal>Preferences...>General>"Show time in month view" may be what you are looking for.
;~)

Help: event times not printing in month view

... and yes, I have checked "show time in month view" in preferences, and the event times display on the screen. But on the monthly printout, the times do not appear, only ellipses where the time should be. There should be plenty of space for the information to print, there is white space both at the end of the event line and in the day box. But no times show up at all.
System data: Mac Mini, OS X 10.4.2, iCal 2.0.3 (1055), Brother MFC 7820N printer.
This is really awful... I just switched my wife over to the Mac Mini, and calendaring is a big part of what she needs. And she uses month views a lot. If I can't fix this, she'll probably throw the Mac Mini back in my face and I'll be sleeping on the couch. Yes, she cares that much about times printing in month views.
Mac Mini Mac OS X (10.4.3)

I don't know whether this a "solution" or a work-around, but I did find a way to resolve this problem. I recently started using iCal by transferring appointments from a BlackBerry using the BlackBerry PocketMac software. Although all of the appointment times appeared on the monthly calendar, most of the appointment times were replaced by ellipses when the monthly calendar was printed. It turns out that the times would print only after re-entering the appointment manually. This had to be done completely from scratch, i.e., not by editing the original appointment, or by cutting and pasting the appointment back into the calendar. This is a complete pain, but seems to work. I'd love to hear a better solution...

How do I turn on the times in iPad calendar month view?

I have an exchange account because I have multiple Google calendars to sync. As sometimes happens in iCal, month view is not showing times of events, just the events themselves. I can not find the setting to turn times on. Any suggestions?

Under Settings>General>Bluetooth.

Appointment times not printing in month view

When I print a monthly calendar, most but not all of the appointment times do not print. Instead, the time is replaced by elipses ("..."). Also, end times are not printed. Any suggestions?

I don't know whether this a "solution" or a work-around, but I did find a way to resolve this problem. I recently started using iCal by transferring appointments from a BlackBerry using the BlackBerry PocketMac software. Although all of the appointment times appeared on the monthly calendar, most of the appointment times were replaced by ellipses when the monthly calendar was printed. It turns out that the times would print only after re-entering the appointment manually. This had to be done completely from scratch, i.e., not by editing the original appointment, or by cutting and pasting the appointment back into the calendar. This is a complete pain, but seems to work. I'd love to hear a better solution...

Wish iCal scrolls instead of jumping (in month view)

I think Apple cares for Real life issues.
Being able to scroll from month to month gives a wider look on Real life.
Jumping is like living a month then forgetting about it.
Tony

No hidden preference that know of. Maybe if you use week view rather than month view? I think, even with a large window, you won't get more that two all-days in month view.
I don't know if it will influence them, but you should use OS X Feedback to tell Apple of the problem.
AK

Palm Desktop crashes when viewing one month in monthly view

Hi--this is a weird problem. Never seen it before.
--My Treo 680 (Win XP SP3), with Palm Desktop 6.2.2 seems to sync fine. I make changes in the Treo, it appears on the desktop.
--Also, I can view and edit the desktop in DAY view.
I normally default to monthly view though--and when I try to edit anything in a monthly view the Palm Desktop immediately crashes.This also seems to happen only with one month--July--where I recently added a lot of new appointments.
I ran the "check" tool for corrupted records, came up clean.
The data seems to be there and be safe and sync, but every time I try to access this one month from monthly view--it crashes.
Any advice, suggestions?
Post relates to: Treo 680 (Unlocked GSM)

Your link generated an error message..but I did find a couple of relevant threads. Thanks..
--I have no appointments spanning midnight, so I presume that's not the problem
--I'm reluctant to downgrade versions. I use the same software on my Vista laptop as on my XP desktop and I'd like to confuse the issue or go through degrading both.
The dbfix program was more interesting. It found for Calendar: one appointment in several places that it said "blob goes beyond end of record."
I don't know what that means, but it was particularly odd as this particular appointment was repeated in multiple years as long ago as 1969, it said--which goes beyond the ability of the desktop software even to access; certainly I wasn't using a Palm in 1969, and obviously it didn't exist. So I deleted all of them but for that 1969 one since the desktop will only go back to Jan 1970.
After deleting what I could delete on the desktop, I sync'd.
Didn't help.
I ran the program again and the exact same older--presumbably fictitious-appointments from old years like 2007 were still coming up as checked errors. Hmmm. Apparently deleting them on the desktop helped not at all. So now I deleted one on the 680 as a test.
I sync'd. Immediately crashed the Palm, but when it came came back up. I doublechecekd--that 2007 record was now gone from everything, desktop and PDA. I syncd again,,,went through fine this time.
Ran dbfix again to check--just coming with that one 1969 inexplicable error. Ran Palm Desktop now. Ran the Options/Tools/Check record on the desktop (included utility) just to be sure--no errors.
The final test--running Palm Desktop back in monthly view. Immediately crashed again.
Shrug!
Now, I don't mind buying the dbfix program if that'll do it, but does this seem like something it needs to go through and might actually fix, as opposed to my manually deleting the things?

Show times in printed week view

Hey everyone!
I am a student at a universty in Belgium, Europe and I always print my weekly schedules with iCal. For I always print my schedule in a 5-days week view, the printed schedule doesn't show any start nor end times. But since my lessons start and end at rather odd times (like 10.25AM or 12.35PM), it's rather hard to deduct these exact times from the printed sheet. So I always print my schedule twice; once in list view for the exact times, and once in week view for a better view on the gaps between my lessons, which is rather unpractical.
Is there any way to show the start and end times in week view when I print it?
Greets and thanks in advance,
Gert Milis.

Never use "Timezone support"; Settings/MailContactsCalendars/Calendars.
When the settings are correct in the event, and not corresponding in the display:
Do a "reset": hold the Power Button and the Home Button at the same time, keep holding, when you see the white apple logo appear, let go and let the 5s start.

Month view, week view and working week view in outlook calendar in wpf

Hello everybody!
i was posted
http://social.msdn.microsoft.com/Forums/en-US/wpf/thread/7d927ca0-a110-4ede-bb2c-fa0070625722/ here how to make Outlook calendar sheet view , and tried
http://www.codeproject.com/Articles/30881/Creating-an-Outlook-Calendar-Using-WPF-Part-2 this sample now i wanted it in Week view ,month view and working week(without sat & sun) , anybody knows any idea for this further requirement.
Thanks & Regards dhampall

Hi dhampall_79,
Ok, you could open the project you shared, and open RudiGrobler.Controls/Calendar/Themes/Generic.xaml file, and then you could find below part of code:
<Style TargetType="{x:Type local:Calendar}">
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="{x:Type local:Calendar}">
<Border Background="#E3EFFF"
BorderBrush="#6593CF"
BorderThickness="2,2,2,2">
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition Width="50" />
<ColumnDefinition Width="*" />
</Grid.ColumnDefinitions>
<Grid.RowDefinitions>
<RowDefinition Height="38" />
<RowDefinition Height="22" />
<RowDefinition Height="*" />
</Grid.RowDefinitions>
<StackPanel Orientation="Horizontal" Grid.Row="0" Grid.Column="0" Grid.ColumnSpan="2" Margin="5,0,0,0">
<Button Content="Previous" Height="25" Command="{x:Static local:Calendar.PreviousDay}" Background="{x:Null}" BorderBrush="{x:Null}">
</Button>
<Button Content="Next" Height="25" Command="{x:Static local:Calendar.NextDay}" Background="{x:Null}" BorderBrush="{x:Null}">
</Button>
</StackPanel>
<Border BorderBrush="#6593CF" BorderThickness="0,0,1,1" Grid.Column="0" Grid.Row="1" />
<local:CalendarDayHeader Grid.Column="1" Grid.Row="1" x:Name="PART_DayHeader"/>
<ScrollViewer Grid.Row="2" Grid.Column="0" Grid.ColumnSpan="2" x:Name="PART_ScrollViewer">
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition Width="50" />
<ColumnDefinition Width="*" />
</Grid.ColumnDefinitions>
<local:CalendarLedger Grid.Column="0" x:Name="PART_Ledger"/>
<local:CalendarDay Grid.Column="1" x:Name="PART_Day" />
</Grid>
</ScrollViewer>
</Grid>
</Border>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
Above code is the appearance of the View, you could create your own view and replace
<local:CalendarLedger Grid.Column="0" x:Name="PART_Ledger"/>
<local:CalendarDay Grid.Column="1" x:Name="PART_Day" />
You could change above two lines to your control, and then you could get what you want.
best regards,
Sheldon _Xiao[MSFT]
MSDN Community Support | Feedback to us
Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

About APEX Calendar views (monthly, weekly, daily)

Hi,
How can I display a DAILY APEX CALENDAR?
I read in some APEX-related articles that it is possible to have 3 different views: monthly, weekly, and daily.
example 1. http://insum-apex.blogspot.com/2008/07/apex-calendar-enhanced-behavior.html
example 2. http://examples.apex-evangelists.com/pls/apex/f?p=286:29:0:::::
I tried to follow the directions given in one of those examples but I found out that the tags in my local environment differ from the ones shown in the example. I don't have the MONTHLY CALENDAR, WEEKLY CALENDAR and DAILY CALENDAR tabs mentioned in the example.
Please help.

Hi user10284066,
Thank you for mentioning this link http://insum-apex.blogspot.com/2008/07/apex-calendar-enhanced-behavior.html
in this forum. Helped a lot.
For people who want to know where to find these tabs,
Home>Application Builder>Application XXX>Shared Components>Templates
select calendar and you must see those(monthly, weekly, daily) tabs under
Home>Application Builder>Application XXX>Shared Components>Templates>Edit Calendar Template
or upgrade to a newer version

I had redeemed 2 $50.00 iTunes gift cards a few months ago. The last time that I checked my iTunes balance, it was $100.00. I logged in to iTunes yesterday and the $100.00 balance isn't showing up. Why would it be missing?

I had redeemed 2 $50.00 iTunes gift cards a few months ago. The last time that I checked my iTunes balance, it was $100.00. I logged in to iTunes yesterday and the $100.00 balance isn't showing up. Why would it be missing? Would that happen if I changed my apple ID and password recently? Or would that happen if I de-authorized 2 devices? Would that happen if I deleted my music from my iPhone? Could someone hack into my iTunes account and take my money? Or maybe Apple charged me for something and debited my iTunes account? If you could please help me solve this mystery, I would greatly appreciate it

Check your account's purchase history : See your purchase history in the iTunes Store - Apple Support
If nothing shows then try logging out and back into your account on the computer/device that you are using.
Neither updating your account id and/or password, nor deauthorising your account, nor deleting content from a device or computer's iTunes library will affect your balance

HT4914 How long is the $24.99 subscription period for iTunes Match, nowhere does it show the time period? Week, month year?

How long is the $24.99 subscription period for iTunes Match, nowhere does it show the time period? Week, month year?

It's an annual amount - it's at the top of that page :
iTunes Match requires an annual subscription fee of $24.99

Times not shown in weekly view

My iCal always used to show the times within the weekly blue "event" rectangles, but these seem to have disappeared recently. The events are still in the right place and given in the extended panel.
How do I get these times back in the main display, please?
The preferences allow for showing times in monthly view but not in weekly.
MacOSX 10.4.9, iCal 2.0.5

Hi John,
You should be able to set iCal so you can see the start times in month view. I can't remember exactly what it says in 10.3, but go to the iCal menu then Preferences and it should be in there.
Best wishes
John M

ICal 'Show time in month view' Month view missing text!

Similar Messages

Maybe you are looking for