ICal shows delegates task and appointments in the small number in the dock

Hi,
I've just started using iCal with exchange. I've been using iCal for a while with google with no problem at all. But now that i use i with the Exchange server it has made something really funny. I'm getting the small number in the dock with the numbers of everybody appointments and tasks. This makes my very busy and i always has something to do even when that's not the case. Is it possible to have iCal to show only the numbers of upcoming tasks and event for myself? I've tried looking around i all the option and preferences with no luck.

I have just turned off time zone support and that fixed the problem. It's always been on, though, I I haven't had a problem before. I have just switched from mobile me to icloud so that may be the root of it, However, iCal has been correct on my iphone and Air.

Similar Messages

  • I cannot open any of the tasks and appointments from the reminders window

    I cannot open any of the tasks and appointments of iCloud folders from the reminders window in Outlook.

    Yes !
    Tried with Outlook 2007 and 2010. Same issue ...

  • Displaying tasks and appointments on home screen

    Hi,
    How can I force BB to show me the tasks and appointments on the home screen for the present day?
    Using BB Curve 8900, ver: 4.6.1, Microsoft Outlook 2003 weekly display.
    Thanks,
    Amnon

    Use a "Today" theme on your device.
    Look at some third party themes, and those named "Today" will have the options to display calendar events (and tasks as well, if they are noted with an appointed time) on your homescreen.
    check AppWorld, or any of the many third party developers.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone. The missing movies are shown as generic movie icons in the iTunes panel. How do I get the original movies to show up again and transfer to the iPhone?

    I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone 5. The missing movies are shown as generic movie icons in the iTunes panel and are checked to select them. But they do not show up in iPhone Videos. How do I get the original movies to show up again and transfer to the iPhone? I recently upgraded Mac OS to 10.6.8

    1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
    2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
    tt2

  • In Firefox 36.0.1, can I show ONLY copy and paste in the navigation toolbar without showing cut?

    In Firefox 36.0.1, can I show ONLY copy and paste in the navigation toolbar without showing cut?

    Do you only want this to happen if you right-click in the location/address bar?
    You can ddd code to the <b>userChrome.css</b> file below the default @namespace line.
    *http://kb.mozillazine.org/userChrome.css
    <pre><nowiki>@namespace url("https://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    #urlbar menupopup menuitem[label="Cut"] { display:none !important; }
    </nowiki></pre>
    The customization files userChrome.css (user interface) and userContent.css (websites) are located in the <b>chrome</b> folder in the Firefox profile folder.
    *http://kb.mozillazine.org/Editing_configuration
    You can use this button to go to the currently used Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *Create the chrome folder (lowercase) in the <xxxxxxxx>.default profile folder if this folder doesn't exist
    *Use a plain text editor like Notepad to create a (new) userChrome.css file in the chrome folder (file name is case sensitive)
    *Paste the code in the userChrome.css file in the editor window
    *Make sure that the userChrome.css file starts with the default @namespace line
    *Make sure that you select "All files" and not "Text files" when you save the file via "Save file as" in the text editor as userChrome.css.<br>Otherwise Windows may add a hidden .txt file extension and you end up with a not working userChrome.css.txt file

  • Set "always show all icons and notifications on the taskbar" via Group policy

    Any ideas on how to set "always show all icons and notifications on the taskbar" on a set of users?
     I thought it would be under User Configuration\Administrative Templates\Start Menu and Taskbar, but I cannot find it.
    Anyone know if this can be enforced via policy?

    Hello,
    Thank you for your post here.
    Unfortunately, there is not any group policy settings which can set "always show all icons and notifications on the
    taskbar".
    To distribute the setting, you can create a default domain user profile and copy it to the following network share.
    When the domain user account is first logged onto the domain, the default profile will be applied.
    \\<Server_name>\NETLOGON\Default User.v2
    How to customize default user profiles in Windows 7 and in Windows Server 2008 R2
    http://support.microsoft.com/kb/973289
    This would only apply if a new profile is created, not for existing ones.

  • Hello, I have downloaded os x mavericks, but download failed many times and file corrupted. Now i'm trying to download again but in app store its showing as downloaded and after hiding the purchase there is no unhide or re-download option. Plz help me.

    Hello, I have downloaded os x mavericks, but download failed many times and file corrupted. Now i'm trying to download it again but in app store its showing as downloaded and after hiding the purchase there is no unhide or re-download option. Plz help me. Thanking you in advance.

    If it is hidden, follow the steps in this KBase
    http://support.apple.com/kb/HT4928
    If you have it in the Applications folder, trash it before attempting a new download.

  • Why has my monitor suddenly begun to have a moiré pattern all over – it is even showing up on my icons on the dock? It appears to be very thin bright green vertical lines. I have a 2008 iMac which is running 10.6.8. What does this mean?

    Why has my monitor suddenly begun to have a moiré pattern all over – it is even showing up on my icons on the dock? It appears to be very thin bright green vertical lines. I have a 2007 iMac which is running 10.6.8. What does this mean? I've attached some screen shots below.
    Also experiencing some funky issues with my wireless keyboard. With new batteries, it will just stop functioning. Certain keys intermittently won't work. Also the fans go on as soon as I turn the computer on - some times they stay on and sometimes they don't. Ever since upgrading the operating system - I've been having many issues with this iMac. Not happy. Any answers out there?

    Thanks for your reply LexSchellings, There is no disc in the drive and I went through the suggestions you put forward on the phone with Apple support without any luck. I can put a disc in but it pops straight back out again without registering on finder.
    The idea of using an external drive was to enable me to avoid the cost and loss of productivity whilst machine in repair... if I have to take it in to get the old drive removed than I might as well have a new internal drive put in, although I do worry about the reliability of these apple drives given my experience with this one coupled with my limited online research ... on line forums seem to be full of people with the same problem (although perhaps searching such forums is bound to make it seem a common problem as users with perfectly working machines are less likely to post (?)) Your reply suggests that no external drive will work whilst the existing drive is in place.
    As a postscript: I do realise that this is a user forum ...my secondary question was asking if anyone knows how to put forward a case/complaint to Apple... I can't find a link on the support page that would enable me to do so and I was wondering if anyone on this user forum had any ideas/experience..

  • Can you make an alias of Grab and place in the dock

    How can I add a alias of Grab and add to the dock when I have maverick OS?

    Open the Utilities folder and drag Grab to the Dock. A space should open up to accommodate it - let go and it should remain in the Dock.

  • I just restore my Mac, and now instead the dock icon I have question marks.

    The only icons I have are: finder, documents and downloads.
    I also used to have parallels and now I don't.

    Drag off the ?'s and let go, (poofy) and just drag and drop into the Dock new copies from the original applications icons in your applicaiotns folder to make new aliases.

  • My phone has died. I tried upgrading my Iphone 3gs yesterday to ios. It failed to update, it has failed to restore. Now its just showing a plug and Itunes on the screen. Please help soonest

    My I phone is literally dead. I tried upgarding the software yestreday, it refused saying there was an error, I was given an option to restore it, it has failed. Now there is no old software as well as the new software. Its showing a plug and an Itunes signal on top. Thats all that it has. I will be very grateful to receive any form of help out there.

    The iOs 5.1 is a huge file that needs to be dowloaded when updating/restoring, your phone hasnt completed the update so its now in recovery mode. Look on the left of itunes, it should say downloads under the store section with a spinning wheel, click that and youll see the update file with a time remaining, wait for that download to finish then try the restore again  and it should work

  • My shared iTunes library shows up fine on my Apple TV, but when I try to access the same library on my iPad to view the shared TV Shows everything jumbled and all over the place. There does not seem to be any order and many shows are missing.

    When trying to access the shared iTunes library of my Macbook Pro on my iPad(iOS 5.1) the TV Shows are all mixed up. Some shows are not even displayed. The same library display normally via my Apple TV. It appears that iPad using iOS 5 has lost the ability to recoginize that TV Shows have a main show title followed by a number of episodes eg., 'Top Gear', Season 17, Episode 1 to 6, and 'Modern Marvels', Vol lll, Episodes 1 to 16. This has to be a glitch with iOS 5 as it was working fine in previous OS versions.
    Does anyone know if Apple is aware of this anomally or is there a work-around? Thanks

    Perhaps you should ask over in the iPad community, you may get better answers there.
    It's actually my fault that psoon ended up here ... s/he intially posted over at Home Sharing, and I tried a relocate request to Apple TV rather than iPad.
    psoon, here's a link to the iPad community:
    Using iPad

  • Why can't I watch shows I purchased and downloaded from the cloud?

    I purchased a season tv show and I cannot watch anything on my PC.  It seems that iTunes totally freezes up and cannot play the show.  I unistalled iTines and reinstalled once already.

    Go to the "Privacy" section of the option window, and make sure that Firefox is set to remember your browsing history, and not to clear history on exit. Then you should be able to choose "Show my windows and tabs from last time" in the startup options.

  • Firefox shows blurry images (and none of the best-known solutions work)

    No matter
    * if I run Firefox under safe mode (plugins disabled),
    * if I update my graphics drivers,
    * or if I disable Harware Rendering under Advanced Options,
    Firefox keeps showing blurry images.
    Here is a comparison screenshot between Firefox (left) and Opera (right) rendering the same image:
    http://imgur.com/7GksG7Z
    This has been happening for a long time, even through several Firefox updates. None of the solutions I've found on the web (listed above) will fix this problem.
    The image blur is tiring on the eyes, not being able to see images correctly is so annoying, and I hope someone can help me fix this issue.

    Changing Firefox's zoom behavior so you can enlarge just the text but not the images can lead to site layouts breaking. If you want to take a look:
    View menu > Zoom > ''check'' Zoom Text Only
    (If you do not normally display the classic menu bar, tap the Alt key to display it temporarily.)
    Firefox 22 was the first to tie your Firefox content zoom level to your Windows DPI setting. You can break the connection and set Firefox to use 100% resolution (the classic 96dpi resolution) if you like. Here's how:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''pix''' and pause while the list is filtered
    (3) Double-click '''layout.css.devPixelsPerPx''' and change its value to '''1.0''' for Firefox 21-sized fonts.
    This will return the content to normal, but the toolbars may appear a bit smaller than your Windows standard for UI (100%/105%). There is an extension to enlarge fonts in that area: [https://addons.mozilla.org/en-us/firefox/addon/theme-font-size-changer/ Theme Font & Size Changer].
    Can you get it to work the way you want?

  • I bought a show on iTunes and I purchased the show but it won't let me download , on iPhone please help

    So I bought  a show on iTunes and I was able to buy it  but it won't let me download it . I was able to download songs and I worked perfectly it's just videos . It's on iPhone so I don't know what to do .

    What happens when you try to download it, if you are getting an error message then what does it say ?

Maybe you are looking for

  • What is best modem for time capsule with cable internet?

    We're subscribing to Comcast

  • Fans on and off are driving me insane (MacBook Pro 13, Windows 7 x32)

    I have had this problem for the past three weeks or so. When I am using Windows, the fan will spend half its time on, half off. It never used to be this way and I am not sure what could have pushed it over the edge - I have not installed any new prog

  • Send Array to CFC Webservice ?

    Hi, want to be able to send my coldfusion webservice an array that I have in flex. Kinda like a shopping cart. I have the array working in Flex, add remove so forth..... but i cant figure out how to take this data and get it to the server. Hopefully

  • Internal error 500

    Dear Friends, When I am Running form9i through oracle 9ias then this error 500 comes(internal server error comes) . from which file i can rectified this problem. with regards Siddharth([email protected])

  • Open/browse windows-share or open explorer to browse windows-share

    hi everyone, i need to browse a public windows-share. i tried to create a link which points to server\share but i just get "com.sap.tc.webdynpro.services.exceptions.InvalidUrlRuntimeException: Invalid URL" exceptions.. some for opening an internal wi