ICal spinning symbol (not beachball) after MobileMe upgrade

I upgraded MobileMe calendar (the careful way: exported everything, deleted everything, upgraded, reimported). All the data seems to be there.
But to the right of "[email protected]" in the LH column there is a spinning circle logo, like it is doing something. It has been there for hours, even through syncs with MobileMe (apparently successful) and a restart of the computer.
How do I make it go away?

Got the same thing plus the spinning beach ball on my MacBook iCal. Then iCal stops responding and finally quits unexpectedly. Slows my machine to a crawl.

Similar Messages

Customer exit is not functioning after ECC upgrade/support package

It seems our customer exit is not functioning after ECC upgrade/support package. I tried to activate the project again, no use. please help. Thanks! (see below for the enhancement info)
COZF0002 Change purchase req. for externally procured component
EXIT_SAPLCOZF_002
INCLUDE ZXCOZU02
*& Include           ZXCOZU02
CONSTANTS: lcc_eban(25)   TYPE c VALUE '(SAPLCOBC)EBAN'.
FIELD-SYMBOLS: <fs_eban>   TYPE eban.
DATA: l_fkstl TYPE prps-fkstl.
Move values from the LUW to the Internal Table
ASSIGN (lcc_eban) TO <fs_eban>.
If the field symbol is "NOT' empty then proceed
IF ( <fs_eban> IS ASSIGNED ).
if WBS work order, get cost center from PRPS
IF ( caufvd_imp-auart = 'ZM05' ).
    SELECT SINGLE fkstl INTO l_fkstl FROM prps
      WHERE pspnr = caufvd_imp-pspel.
    IF ( sy-subrc = 0 ).
      WRITE l_fkstl TO <fs_eban>-zzfistl.
    ENDIF.
if not WBS WO, move cost center minus leading zeros to funds center
ELSE.
    WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
ENDIF.
ENDIF.

Did you mean set a break point in the follow code?(Include ZXCOZU02), I tried set a break point in this code, but It didn't stop .
*& Include ZXCOZU02
CONSTANTS: lcc_eban(25) TYPE c VALUE '(SAPLCOBC)EBAN'.
FIELD-SYMBOLS: <fs_eban> TYPE eban.
DATA: l_fkstl TYPE prps-fkstl.
Move values from the LUW to the Internal Table
ASSIGN (lcc_eban) TO <fs_eban>.
If the field symbol is "NOT' empty then proceed
IF ( <fs_eban> IS ASSIGNED ).
if WBS work order, get cost center from PRPS
IF ( caufvd_imp-auart = 'ZM05' ).
SELECT SINGLE fkstl INTO l_fkstl FROM prps
WHERE pspnr = caufvd_imp-pspel.
IF ( sy-subrc = 0 ).
WRITE l_fkstl TO <fs_eban>-zzfistl.
ENDIF.
if not WBS WO, move cost center minus leading zeros to funds center
ELSE.
WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
ENDIF.
ENDIF.

My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

Please let me know , How we can reinstall apple mail ? .
1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
2. After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
a)Not showing any SMTP connection in TCP trace ,
b) Connection docter every time Says "Connecting to the server "
3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
Please help me .
Thanks,
Ranesh..

Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help!

The MSS ECM FPM Steps are not working after the upgrade

Hi all,
The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
But this functionality was working before the upgrade.
Please let me know what should I do.
Thanks,
Sarayoodharan.K

clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 - Cleint should be 000

When apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

when apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

there is no problem with B/T and iOS7.0.3 in my case used on iPhone 5 and 4 in several environments including in car
Do a reset
restore with back up and if required as new

TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix. I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z. Any help? Thanks.

after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
basically everything is clean now. At least i hope and works fine. touch wood!

Why is Time machine backup not working after Mavericks upgrade?

Why is Time machine backup not working after Mavericks upgrade?

I had the same problem due to the Fire Wire port. Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device. I find it strange that as soon as I installed Mavericks. The drive does work using USB. It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

HELP!!! iTunes not playing after lastest upgrade

My iTunes is not playing after lastest upgrade, and i onli hear a lo buzzing sound wiht i hit the play button, and the diamond thingy is still moving. I tried reinstalling and re importing the music files, but i juz wouldn't work. help

Nope i did not have any success with the other possibilities, other then the one concerning the hardware.
hmmm. okay, if you switched sound enhancer off, that probably would have covered that possibility anyway.
we'd better check your video drivers as well as your sound card drivers. (old video drivers can cause problems with Quicktime that can show up as itunes audio problems, since QT provides audio playback for itunes.)
http://www.info.apple.com/kbnum/n300252
keep us posted.
love, b

SLD will not start after I upgraded Netweaver 2004s Portal

SLD will not start after I upgraded Netweaver 2004s Portal from SP 14 to SP 15.
It gives me the following J2EE error:
Application error occurred during request processing.
Details: java.lang.NoSuchMethodError: com.sap.sld.api.wbem.transform.ICIMParser.getNamePool()Lcom/sap/sld/api/wbem/cim/NamePool;
Exception id: [00145E336A6A00680000002A000003480004502001E11FF0]

Hi ,
as a first question: What versions of WAS / NWDS are you using?! (Main question is if you are using corresponding versions, i.e. NWDS 2.0.x with WAS 6.40 SP x, with the same value for x.)
See the threads below for more information
NetWeaver 2004s upgradation problems
Could not run WebDynpro Tutorial - NoClassDefFoundError
Points are welcome if it is useful
Koti Reddy

Database history growth not updating after EHP upgrade

Hi All,
We are using SAP ECC 6.0 (731 - SP09 ) & DB2 Fix pack 5 version.Database history growth not updating after EHP upgrade. I have check collector job running fin and DB tab > Configuration > Data Collection Framework > Configuration Collector are in green status.
Please help me to resolve this issue.
Regards,
MK

Hi MK,
You can try few things:
1. Check to collector standard job like SAP_COLLECTOR_FOR_PERFMONITOR should be running succesfully.
2.If you can check to data collector collection interval column , you will find it to be Not Schedule.
Try with Repair all collector.
To make it work properly you have to perform
Data Collection Full
Data Collection Incremental
Hope it helps
BR Vaibhav

Notes problem after Mavericks upgrade

Notes will not sync after Mavericks upgrade, other apps - mail & contacts & calendar do sync

First check that all your settings are correct, that notes syncing (mail and notes on a computer) is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the notes you are adding are added to your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by checking in accounts on an iOS device, or the left side panel in mail on a computer), non iCloud notes will not sync.
If you are sure that everything is set up correctly and your notes are in the iCloud group, you might try unchecking notes syncing (mail and notes on a computer) in the iCloud settings, restarting your device and then re-enabling notes syncing.

The Connection Server does not start after an upgrade to BO4.1 SP3

Hello guys,
The Connection Server does not start after an upgrade to BO4.1 SP3
We are in process to upgrade our Business Objects environments to BO4.1 SP3
The first 2 environments , the upgrade went fine. But the third environment de connection server won’t start.
When I always try to start it returns me a failed status and shows me that the server is considered failed because it has stopped 5 time(s) in 60 minute(s).
Our OS is AIX
Uncaught Exception in SilentScope: [CS] Ser
verInitialization::InitManager::Initialize: 0.007^^
The CS initialization failed within the CS server. Aborting
trc file: "connectionserver_BIO.ConnectionServer_ncs.trc", trc level: 1, release: "720"
Gerd

Hi Amine
The File seems ok
File from the failing connection server
-rw-rw---- 1 bioadm bosys 43993 Apr 11 11:29 boconfig.cfg
File from our test system
-rw-rw---- 1 bitadm bosys 43892 Apr 14 10:56 boconfig.cfg
I created a new connectieserver(by the copy function), but the new server won't start.
Regards
Gerd
Log
|89d4a6e0-2a89-7a05-3020-a51d517ab872|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] Unhandled exception raised during CS initialization.
init_srv.cpp:95:-: TraceLog message 3
|4dcf04b1-1e1d-df13-48ad-a67f06e29864|2014 04 14 11:54:30:113|+0200|Error| |<<|E|X|connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||Uncaught Exception in SilentScope: [CS] ServerInitialization::InitManager::Initialize: 0.003
|77ad78f4-37f7-3013-3b50-85cce9fbe7b8|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] The CS initialization failed within the CS server. Aborting.

All my Notes disappeared after ICloud upgrade

All my Notes disappeared after ICloud upgrade. I cannot find them, nor a way to recover them from backups? Any ideas? This is a BIG hiccup!

I posted this on another discussion:
Similar problem: I was at a store today and went to my Notes on iPhone 3GS to look up information recorded there about medications for an aging parent. I am syncing through iCloud so the same notes are on my iPhone, iPad 1, and desktop Mac (in Mail). I opened one note, but it didn't have the information I needed, so I went back to the main Notes list and picked another of the dozen notes. I was scrolling down through that note and then suddenly....poof....the note was gone. ALL the notes were gone. The note pad said NO NOTES. ***???!!!!
They were gone from my iPad, too. The notes represent information gathered and organized from multiple years (with no problems until now). The notes are information I NEED. I created a test note, it showed up on my devices. Then I chose to delete it to see if a single key click could do that. The app requires a second click on a Delete Note button as confirmation. And there's no way to delete ALL notes while viewing a single note, deliberately OR accidentally.
Any suggestions about how to recover the notes lost today? Thanks in advance.

Re: Safari 7.0 zoom not working after Mavericks upgrade.

Re: Safari 7.0 zoom not working after Mavericks upgrade.

Hey there sarunelis,
It sounds like after updating to 10.9 the zoom function is not functioning at all. It sounds like you may need to check for 3rd party plugins. This article will help you check for that.
Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
http://support.apple.com/kb/ts3230
Thank you for using Apple Support Communities.
Regards,
Sterling

ICal spinning symbol (not beachball) after MobileMe upgrade

Similar Messages

Maybe you are looking for