ICal splits one event into two, how do I fix this?

I have one weekly repeating event entered.  For the first two weeks it shows up like normal, as one event.  But two weeks later it splits that one event into two different side-by-side bubbles.  I did not alter the event.  Does any one else have this problem?  How can I fix this?

That is because you are sharing an Apple ID.
On both phones go to:
Settings > Facetime > turn off iPhone Cellular Calls
I would also suggest you check here to make sure your husbands number is not checked on your phone or yours on his:
Settings > Messages > Send & Receive
Settings > Facetime
Otherwise you will get each others Messages and FaceTime calls.
I recommend that you each get your own Apple IDs if for nothing else than iCloud, iMessage & FaceTime.

Similar Messages

  • Split one IDoc into two IDocs ?

    hello all,
    I wanna split one IDoc into two IDocs in XI?
    how can implement it?
    plx give some suggestions.
    thx in advance
    best regards
    Yaning
    Message was edited by:
            Yaning Liu

    Yaning,
    Please find the below blog for changing the ocurrences of IDOC
    /people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
    Best regards,
    raj.

  • Upon syncing my iPhone and mac all of my ical and iPhone calendar events have duplicated. how can i fix this and avoid it in the future?

    upon syncing my iPhone and mac all of my ical and iPhone calendar events have duplicated. how can i fix this and avoid it in the future?

    Greetings,
    Questions:
    1. What version of the Mac OS are you running (Apple > About this Mac)?
    2. What version of the iOS are you running (Settings > About)?
    3. Do you backup your computer (http://support.apple.com/kb/HT1427)? 
    --- If you don't regularly backup your computer, now is the time to start.
    4. Do you backup your iPhone (http://support.apple.com/kb/ht1766)?
    Check the calendar list on the left hand side of iCal.  Is it that the individual events are duplicated or is it just that you have the same calendar listed more than once?  If its that you have more than 1 copy of each calendar, you can delete one of the duplicate calendars to eliminate the duplicates.
    If you find that it is the individual events that are duplicated then there are 2 options:
    1. Restore your computer iCal database or iPhone from a backup made before the duplication occurred.
    2. Use a duplication removal program (or do it by hand) to remove the duplicates: http://www.nhoj.co.uk/icaldupedeleter/
    If you have a backup made before the duplication occurred, reply back with what kind of backup you have and I'll suggest how to recover the calendars.
    To avoid this issue in the future:
    Keep regular backups.  They are your best defense against data anomalies which are a fact of life in computers (although hopefully rare).
    Keep your computer and iPhone software fully up to date (Apple > Software Update / Settings > General > Software Update).
    Make sure the date and time on your computer and iPhone are correct before you sync the two devices.
    Make sure the cable connections between the two is solid and that the cable shows no signs of physical damage.
    Hope that information helps.

  • How to split one monitor into two, differently configured desktops

    Hello,
    I have a 27" iMac. I would like to split the screen into two differently configured desktops or monitors. Apps like TwoUp or Divy don't exactly do this. I'll explain it with an example:
    Suppose I'm working on a document and I need to open many folders to retrieve files. One common problem is that opened folders overlap each other and sometimes they overlap with the document I'm working on, or they go underneath the document. I would like to split the screen vertically in, say, two virtual, independent desktops/monitors, like this:
    - one window/space on one side (say, on the left) of the screen would contain the document  from top to bottom, with no dock bar on the bottom
    - the other window/space (right) would behave as a regular, full desktop, with the entire dock on the bottom
    In this way, if I need to navigate to find a file to use in the document, I would move the cursor to the right. The Finder would work only in this window/space, thus windows or other applications would never overlap or clutter the left side of the screen. Drag-and-drop from right to left should be possible.
    One way to imagine it is as if the 16x9 monitor were comprised by two vertical, 8x9 independent monitors side by side, each with its own configuration.
    Is this possible? Can anyone recommend an application or type of setup?
    Thank you,
    -celso

    Looking for something like this?
    You can tell Display Maid to save the positions of your open windows across many apps and later restore those positions when things become a mess. With Display Maid you don’t have to restore windows one at a time, or even one app at a time. Display Maid restores all saved window positions across all apps with one command. It will also restore window positions automatically when it detects a workspace change.
    http://www.funk-isoft.com/index.php/display-maid

  • All of my holidays in iCal are all one day off? How do I fix this?

    All of my holidays in iCal are one day off... How do I fix this?

    Heather,
    Can you help me figure out why all of your Holiday's are different from your other events?
    When/how were these Holiday events entered?
    Have you checked iCal>Preferences...>Advanced>Turn on time zone support?

  • HT201317 after I have copied my photos to a folder and delete from photo stream, it deletes the ones I copied. How do I fix this?

    After I copy my photos to a folder in Windows Live and delete them off photo stream, it deletes the copied photos. How do I fix this?

    I know you need iTunes tosynchorinize your iPad, and i know ther is a connection kit (i searched internet before posting this question).
    The point is:
    We are on vacation. the iPad is my fathers. We have here only his iPad and my laptop. We wanted to put foto's we made with a digital camera foto's on the iPad, so i connected the iPad to my laptop, and was able to copy the foto's to the iPad. So they are on the iPad, but they cannot be viewed. Since I do not want to instll software on my laptop I do not need my self, and we see no point in buyin a connection kit for one time use, it would be great if you could just copy foto's to the iPad and then view them.
    I would appreciate it very much if someone could tell me how to do this. I am not used to working with tablets.so I am used to thinking "PC wise": youo copy files to a location on your computer and then you use a program to open those files. I know it works differently on an iPad, but it woul be great if this was one option that also would be available.

  • PRE9: How to split one clip into two (or more) clips?

    I can't believe this is so hard to do... But HOW?

    You don't necessarily need to separate the file into individual clips.  When you do a cut on the timeline, this is a virtual cut, leaving the original file untouched but determining what will appear in the output.  You can split the clip into multiple pieces, delete the bits you don't want, add transitions, insert new bits, whatever you want, all without affecting the original file in any way.  Once you're happy, you output a new file using the Share options, and you get a new video file, with your original files still untouched.
    If you want to split your file into multiple individual files, you can use the sliders on the time scale, and export (Share) using the Share Work Area Only checkbox.  If you're doing this for purposes of reassembly, it would be better to save the individual clips in as lossless a format as possible, the default AVI format taking considerably more space but not losing quality.  Hint: the sliders can be positioned to the time marker using Alt-[ and Alt-].  Once you've done this, note that your original file will still be there, untouched.
    There is also VideoRedo Plus, a cheap program which gives frame-accurate selection and allows rapid subdivision of a piece of footage.  It doesn't re-render as PE9 would (this is where loss of image quality creeps in using compressed formats such as MPEG), copying the original frames.  You can then reassemble the bits using your video editor.

  • Splitting one message into two files

    Hi all,
         I have a case where I have to generate two files for a single incoming message.The scenario is as follows-
    I have the following structure as target -
    - Structure 1 with some fields in it
    - Structure 2 with some fields in it
    I have done the mapping of the target with the source.
    Now what I require is a separate file for structure 1 and another file for structure 2
    Thanks,
    Sandeep

    You need to use BPM for this.
    First create a message mapping with one source and two targets.
    To add more message types to a mess map, go to the Messages tab (there are 3 tabs: Design, Test, Messages ).
    Then you need one transformation and two send steps in the BPM.
    regards
    SKM

  • I'm having trouble with popups on my mac book pro constantly along with words on every page that have turned into links. how do i fix this???

    i have pop ups constantly from mackeeper and many other websites. i also have noticed that some words on all websites have turned into links... how do i fix the problem??

    You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    /Library/LaunchDaemons/Jack.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /Library/PrivilegedHelperTools/Jack
    /System/Library/Frameworks/VSearch.framework
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot" or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • Splitting an Event into two

    I am trying to do exactly what the title says, and searched for it in the user manual. It says you simply select a clip in an event, then choose file > "Split Event Before Selected Clip." I've tried this so many times, by selecting an entire clip, or just clicking between to clips. Nothing works The choice is always greyed out. I am using normal DV footage.
    I am so frustrated, I'm just going to go sleep it off. Hopefully someone can enlighten me of what I'm doing wrong when I get up.
    Thanks

    iMovie 08 may be the worst piece of software ever released by Apple. I have the latest Mac Pro, with 3 gb of RAM, plenty of hard drive space, and I've been using iLife for years. This complete re-write of a great program has produced a non-intuitive piece of crap. I've watched the promotional video several times now to try to understand the rationale for this new software and how to use it. As they basically state in the introduction, "one of our employees shot some video and couldn't produce a 5 minute video in 20 minutes so he re-wrote the application... isn't this great!
    You mean to tell me that because one of their own employees couldn't figure out how to do what most of us do on a daily basis, they re-wrote a great application to fit his needs and perplexed the rest of us????
    Every time I open iMovie 08, a different set of my videos shows up in the project panel. I can't figure out how to split video, delete commercials or other unwanted footage, or add transitions. I'm no dummy, I have several graduate level degrees and I've been using Apple products, as well as all the iterations of iLife for years.
    iMovie 08 is the worst, most non-intuitive application ever to be issued by Apple. Was this produced in Redmond?

  • Music app splitting one podcast into two - why?

    I have a 4th gen iPod Touch running iOS 6.1.6 - newest available.  I listen to podcasts through the standard Music app.  For some reason I have one podcast that shows up as two on that app - even though they have the same name.  AND in iTunes on my Mac it is a SINGLE podcast that contains all of the episodes - including the six that are split out on the iPod.  No change in the stream location; no change in the podcast name; nothing different between the meta fields when you do "get info" on the podcasts.  In that separate podcast on the iPod, there are 6 podcasts (un-played) from 2012.  Everything in the "main" podcast that is un-played is 2013 or newer.
    I done a lot of googling and can find nothing on split podcasts other than when the actual podcast changed its name or the stream location.  This is not the case here.
    Any ideas???

    This thread helps you, at least Brian's answer:
    https://discussions.apple.com/message/23507673
    At least this was the resolution for me.

  • Splitting one site into two

    I have one large site which has two distinct sections. Each section has multiple pages. I have two domain names.
    I would like to split the site by removing one of the sections and making a new site with these pages.
    I imagine it is not difficult, but could not locate this in a search.
    Thank you.
    asuch

    asuch:
    It's very easy to do. Create a new site and drag the pages from site 1 to site 2. Somewhat the opposite as shown here.
    OT

  • Splitting one column into two columns

    Hi,
    How to create two columns in one column header using JTable swing concept in java.
    Thanks in advance

    [http://forum.java.sun.com/thread.jspa?threadID=488822&messageID=2297054]
    you can use MultiLineHeaderRenderer class for this purpose. search for that class and examples
    sunil

  • When I make a new Calendar event the phone loads, and then the event disappears! How can I fix this?

    On my iPhone 4 8GB unlocked (iOS 6), whenever I try to make a new event in Apples Calendar app, when I am done making the event, the phone shows a small loading circle in the top bar and when that loading circle stops the event disappears. I checked my iCloud Calendar in case it stored it there or something but no that was empty. And making an event in the iCloud Calendar app does not make it sync the event to my iPhone 4 either so I basically cannot make any events at the moment. Help!
    EDIT:
    I just went into the iCloud settings and saw that the Calendar iCloud sync was turned on. So I turned it off, waited, turned it back on again and now I see the events again, and I can make them without them dissapearing immediately. Stupid bug.
    Message was edited by: AppleRayL

    see > OS X Mountain Lion: Shortcuts for taking pictures of the screen
    or > How to Take a Screenshot in Mac OS X (with screenshots)

  • I messed up a transfer from one iPad to another, How can I fix this?

    I was following the instructions I found on osxdaily to transfer using iTunes, but the new iPad didn't register and iTunes wants to delete everything off the old one.

    Just sync the games from the iTunes Library on your computer to the new iPad. The games will already be in there if you've been syncing the iPad with iTunes regularly as designed.

Maybe you are looking for