ICal start time and red dot

I've set the day to start at 8am but the daily and weekly calendar views start at 5am. Can it be set to show the correct start time?
Also, in the weekly view, there's a red dot that looks like a push pin near the hour. What is that?

Hi Alec,
I have an Applescript that hides time ranges in iCal that I was sharing on my website called Visible Day in iCal. It works in OSX 10.5 and OSX 10.6 but crashes iCal in 10.7 or later, so I removed it. If you would like a copy, send me a message.
The red dot shows the current time in iCal.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Discussions Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Similar Messages

External monitor filled with static, blue squares, and red dots

     My family bought a Mac like 8 or so years ago. I am unsure of the exact model, but says iMac on the back (Which isn't very specific, so I apologise).
     You'd expect problems after a few years, so when our mac became cluttered with multi-coloured lines, I wasn't surprised.
     Eventually, it got to be a problem when the screen started to have larger lines whose lights seemed to be failing. It got to a point in which the whole screen had static, and there was very little of the screen that could actually be scene. It was easy enough to fix, we just got a new monitor.
It did the job, no more lines, the screen did have a yellow tint, but I wasn't worried.
     Now, I was watching some youtube videos, then all of a sudden, both screens stopped, and red dots appeared. After countless efforts to exit the video, I unplugged the computer. When I turned it back on, it was even worse, with blue squares filling the screen, static filling it, and countless more red dots.
     While the external monitor does not have the multicoloured lines, and such, both seem to have the same blue squares, static and red dots, at least for what I can tell.
     Curiously enough, the waiting symbol for the cursor appeared and none of the screen problems overlapped the original.
Did I do something to it?
Is there some way to fix it, or will I have to get a new one?
Also, I apologise if this question is in the wrong category, I'm new.

Welcome to the forum!
Your GPU is failing.
Lenovo might or might not fix it, although it's out of warranty. They are *extremely* well-aware of the problem that plagued these chips.
Reading related threads here or on Bill Morrow's ThinkPad Forum will reveals hundreds - if not thousands - of similar cases...
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

ESS Working Time - Start Time and End Time in Weekly View

Hello,
I'm having a problem with the business package ESS - functionality Working Time (cat2).
I need that information to Start Time and End Time appear in the Weekly View of the portal.
In Daily View that information are already visible, but In Weekly View that information does not appear.
Does anyone have any suggestions?
Thank you very much your attention.
Att,
Jair de Oliveira Junior

Hi Bala
You can have clock in and clock out in a weekly view.
you have to change the data entry profile settings.
In general settings tab in data entry profile click the with clock times button and maintain the Period type to 02 in time settings tab.
And you can view the weekly entry in clock in and clock out.
Ravee
+91.99206.33669

If I have manually set "Start Time" and "Stop Time" for songs, and my hard drive is backed up in Time Machine, when files/songs are transferred on new hard drive, will my "Start Time" "Stop Time" options be there?

My Macbook Pro will be going in for reimaging and my hard drive will be wiped, I want to know if all my iTunes preferences will be copied if I have backed them up on Time Machine. Specifically, if I have set certain "Start Time" and "Stop Time" for my songs, and I copy my iTunes library, will these "Start Time" and "Stop Time" options remain or will I have to manually set them one by one once again? I need a reply ASAP! Thanks so much!

As far as I'm aware the start & stop times are stored in the library database, not the media files. If you backup/restore/transfer the whole library then the settings are included. If you create a complete copy of your iTunes folder on another drive you can connect to that copy by holding down option/alt as you start iTunes so you can check that everything is working properly before you send the Macbook away.
tt2

Calculate End Time from a Start Time and Minutes Allocated

Hello,
I have a meeting form which needs to have the finish time calculated from a start time and allocated time (in minutes).
The allocated time is a text field with the default of "00:00". The user can then enter the number of minutes for the agenda item to take. eg 00:20 would be 20 minutes.
The start time is a date/time calculated field which shows the current time after the allocated time has been entered. The formcalc script is :
form1.ActionsHeaderFrame.ActionsStartTime.rawValue
= num2time(Time(), TimeFmt(1))
The Finish Time field is a calculated date/time field to add up the start time and allocated minutes.
The formcalc script is:
var Min1 = ActionsTime.rawValue
var Start1 = Time2Num(ActionsStartTime.formattedValue, "h:MM A")
form1.ActionsHeaderFrame.ActionsEndTime.rawValue = Min1 + Start1
The end time is showing as a number, and I need help in converting to a time.
An example is as follows:
If the text field for allocated time as 00:20 and the start time date field shows 4:23 PM the calculated End time field is showing 22980001.
Any advice or assistance with this script would be most appreciated.

Thank you very much for your assistance.
I have changed the allocated time field (ActionsTime) to a binding time field.
In the End Time Field (ActionsEndTime) I have changed the formcalc function as follows:
var Min1 = Time2Num(ActionsTime.formattedValue, "HH:MM")
var Start1 = Time2Num(ActionsStartTime.formattedValue, "h:MM A")
$ = Num2Time((Start1 + Min1), "H:MM A")
The result with user input:
Allocated time field input of 00:10 which is equal to (10 minutes)
Start time field 10:41 AM
End time Field result shows 23:51 PM
Can you please advise where the formula needs to be revised to show the correct end time?
Thank you

Function Module for Start time and End time

Hi Experts,
I need a function module for getting particular Work schedule rule start time and endtime and further details by passing personnel number and day.
Thanks in advance.
Sunil

FYI - https://forums.sdn.sap.com/click.jspa?searchID=-1&messageID=5338428
Thanks,
SK

In SharePoint Calendar lists, fields [Start Time] and [End Time] do not exist at the Site Column level.

<header style="box-sizing:border-box;color:#777777;line-height:1;font-size:13px;padding-right:46px;margin-bottom:3px;font-family:'Helvetica Neue', arial, sans-serif;">
</header>
I'm doing SP app development and have the following problem.
I need to check Start time and End Time in SharePoint Calendar using CAML query and then add a new event to Calendar list using the Start time and End Time that user has entered in 2 datapickers
in the form.
function AddCalendarListItems() {
var SD = document.getElementById("datepicker1").value;
var SThh = document.getElementById("St1").value;
var STmm = document.getElementById("St2").value;
var ED = document.getElementById("datepicker2").value;
var EThh = document.getElementById("Et1").value;
var ETmm = document.getElementById("Et2").value;
var T = document.getElementById("Title").value;
var S1 = SThh;
SD = SD.slice(6, 10) + "-" + SD.slice(0, 2) + "-" + SD.slice(3, 5) + "T" + SThh + STmm + ":00Z";
ED = ED.slice(6, 10) + "-" + ED.slice(0, 2) + "-" + ED.slice(3, 5) + "T" + EThh + ETmm + ":00Z";
//alert("SD= " + SD + " , ED= " + ED);
var siteUrl = SiteCollurl + "/SharePointApp11";
var clientContext = new SP.ClientContext(siteUrl);
var oList = clientContext.get_web().get_lists().getByTitle('Calendar');
var ListItemCInfo = new SP.ListItemCreationInformation();
var newEvent = oList.addItem(ListItemCInfo);
newEvent.set_item("Title", T);
newEvent.set_item("EventDate", SD);
newEvent.set_item("EndDate", ED);
newEvent.update();
clientContext.executeQueryAsync(Function.createDelegate(this, this.onQueryAddCalendarSucceeded2), Function.createDelegate(this, this.onQueryAddCalendarFailed2));
function onQueryAddCalendarSucceeded2(sender, args) {
alert("Success");
function onQueryAddCalendarFailed2(sender, args) {
alert('Add new item to the calendar failed. ' + args.get_message() + '\n' + args.get_stackTrace());
But I receive the following error:
Add new item to the Calendar failed. Column 'Start time' does not exist. It may have been deleted by another user.
I've checked and 'Start time' does exist. So it seems in SharePoint Calendar lists, field [Start Time] and [End Time] exist but do not exist at the Site Column level.
Please advise.

Hi Khojasteh,
Use “EventDate” for Start Time field, and “EndDate” for End Time field. They are the internal name of the two fields, you can check it in the column settings page url like “Field=EndDate”.
If it isn’t the issue, please debug the code, in which line the error occurs.
Thanks,
Qiao
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Qiao Wei
TechNet Community Support

Hide the start time and end time in ESS portal

Experts,
We have a requirement to hide the Start time and End time on the header section of the travel request / expense sheet in the ESS portal. I have searched through the configuration and found several place to hide the start time and end time of segment yet these have no impact on the porta start and end time fields.
Please Advise.
Best Regards,
Martin Weakley

Hi Martin,
you can achieve this with administrative personalisation. In portal content navigate to the role where you deltalinked your iView, click "preview". When a new Window for the preview is opened, notice the URL contains "&sap-config-mode=true". Now right click on the fields you want to hide and choose "enter configuration" (or the like, wording is not exact) from the context menue. The WD-UI-Element tree opens where you can directly hide/customize properties of the WD. When clicking save+exist you can also transport the alterations you did.
maybe this helps or gives you a helpful alternative to the already stated measures in this thread
regards, Lukas

How to get the start time and date

Hi everyone! I have a question ,who will be glad to help me! Thanks in advance!
As we know ,when we finish the UUT test ,it generate report . The report format maybe like"SeqFileName_Report[Time][Date]_00001.xml"
My question is"how can I get the [Time] and [Date] in the test sequence"

See this post.
How To Display Time Information in Report/Results?
http://forums.ni.com/t5/NI-TestStand/During-a-test-how-can-I-find-the-start-time-and-date-of-that/td...
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

Start time and endtime of a procedure

Hi all,
I want to findout the start time and edn time of a procedure that was executed now.
How i can do this using oracle. Is there any table that will store this information??
or is there any aproach??
My exact requirement is
i am developing a shell script to execute the procedure.
at the end of the unix shell script i i will capture sql/plsql information in a .log file.
i will search for the start and end times from that .log file.
so i want to capture the start time and end time using oracle.
kindly reply soonn... very urgent
Thanks.

Hi,
There is a table called V$SYS_TIME_MODEL. You can use it as follows to find the time spent in executing a PL/SQL procedure.
SELECT VALUE FROM WHERE
STAT_NAME = 'PL/SQL execution elapsed time');
Execute the above query before and after execution of the pl/sql procedure. The difference should give you the time spent in the procedure.
Hope this helps,
Regards,
Sumit

SCOM Alert Connector - not updating the start time and finish time

When I am monitoring the status of connectors in service manager console, I found that for SCOM Alert Connector the Start Time and Finish Time are not updating. Previously it was updated daily. As of now, service manager is working fine but would like
to check will it create any issues? Even I have cliked on Synchronize Now, but there is no update. Please guide me on this to trouble shoot further? Thanks.

Hi,
Based on my research, the Start Time and Finish Time values are not updated when an alert connector is synchronized. These values are only updated when alert data is transferred between Operations Manager 2007 and Service
Manager.
More details, please refer to the link below:
http://technet.microsoft.com/en-us/library/hh495609.aspx
In addition, here is a blog about troubleshooting for SCSM and SCOM alert connector:
http://blogs.technet.com/b/servicemanager/archive/2010/04/14/troubleshooting-tips-for-your-scsm-scom-alert-connector.aspx
Regards,
Yan Li
Regards, Yan Li

Enter start time and end time of inspection

Dear all
Plz tell me where we can enter start time and end time of inspection.
Regards
Nirmala

Hi Nirmala,
I think Inspection start time is not required for any analysis or else. Days taken for closing lots are important than time. Any how, the stock posted or Inspection completed time is already available in Stock posting log - transaction QA33.
In transaction QA33,
1. Input Material, Plant & Period etc
2. Select a lot (UD made)
3. Select Usage decision tab
4. Select Stock posting tab
5. Select Stock posting log in the tab(header) - here your inspection completed (UD) time is getting stored
Further issue, pls reply.
VRMP.

How to know the process chain start time and end time

Hi Experts,
How to know the process chain start time and end time .
Thanks in advance
Regards
Gutti
Edited by: guttireddy on Feb 23, 2012 11:30 PM

Hi Reddy,
You may find the run time of a PC using below steps.
1. Call SE38 > /SSA/BWT > Execute > Enter your PC , choose the date and time > Execute. Here Run-time of a PC is displayed. (or)
2. Call RSPC1 > Enter your PC > Execute > Goto Log view > Right click on the start Variant > Displaying Messages > Note down the start time in Chain Tab. Now Right click on the last Process type of the PC > Displaying Messages > Note down the End time in Chain Tab. The Difference b/w start time and end time gives the Run-time of your PC.
Hope this helps.
Regards
Sai

Polygons and red dots on screen

Sometimes, when I scroll down on web pages, green and red polygons take most of the screen.Oftentimes, red dots appear on the screen when I am playing a videogame (mostly in dark scenes).What is the problem and how is it solved? My guess is that it is a malfunctioning GPU that needs to be replaced, but I would rather not speculate and hear from a specialist. Model: ENVY Phoenix 810-330qeCPU: Intel(R) Core(TM) i7-4770K CPU @ 3.50GHzGPU: AMD Radeon R9 270RAM: 8GB DDR3 1.6GHz

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how green and red pixels take up most of the screen when you scroll down web pages, and I would be happy to assist you in this matter! To correct this issue, I recommend re-installing all of the original software and hardware drivers that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 8). To update these drivers, please follow this resource on Using HP Support Assistant (Windows 8). If the red dots still appear on your display screen, I also recommend following this document on Display Quality Issues, which should help prevent the occurrence of dots and pixels when playing games and surfing the Internet. Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards

Calc start time and Calc end time

Hi,I am trying to do a "grep" from a application.log file. The # of start time cals = # of calc end time. Is that correct ? We want to make sure that load and calc are completed before start the backup process. I am checking for #'s that are spit out in the log file to conclude this process.Does anyone have a better idea ?Thanks,Minash...

Have you tried grepping for the message number - 1012550. This is the message number for the 'Total Calc Elapsed Time: ' message. You could prabably also grep for the message text.Jerry UrsettiWellPoint

ICal start time and red dot

Similar Messages

Maybe you are looking for