ICal stopped because of too long reminder text

I have copied a text into iCal as reminder, but apperently this text looks too long and therefore every time I start up iCal on my Mac it kind of crashes.
I can see my calendar but not add or change anything.
Does anyone have the same experience and can anyone tell me how to solve this issue.
iCal still works both on my iPad and iPhone without any issues, but on my Mac is crashes instantly when I start it up.

I solved the issue myself by removing 'reminders'  via my iPhone, update iCloud, and voila iCal works again on my Mac :-)

Similar Messages

  • Column value '        ' too long - must stop', probably configuration error

    Hi Experts,
    I have a Proxy to File Scenario when I execute it I get this error in RWB. Can you please help me on this:
    Message processing failed. Cause: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value '        ' too long - must stop', probably configuration error in file adapter (XML parser error)''; nested exception caused by: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value '        ' too long - must stop', probably configuration error in file adapter (XML parser error)'
    Thanks
    Srikanth E

    Hi,
    if there is any empty tag coming from source then target structure tag will not be created and because of which ur payload structure and FCC configuration is not matching.
    To use map with default between source and target strcture so in case source tag dont have value target structure will be created because of mapwithdegfault fuction and ur FCC will not fail.
    Open SXMB_MONI output payload and compare the structre with Data type u will se for no source value target tag is not created at all and FCC is failed.
    please refer below thread,
    0 byte txt file using receiver File Adapter
    regards,
    ganesh.

  • Workbook Precalculation: "Message text too long:

    Good day
    I have setup the precalculation server/services and all is well except for the size of some workbooks.  I receive the following message:
    u201CThe message could not be delivered to recipient  because the message    
    text was too long. The node used supports messages up to a a length of  
    20,000,000 bytes. The message text is, however, 43,152,918 bytes long.u201D
    I have deleted the results from the workbook before precalculation and the file is zipped for email.
    Where in BW will basis have to increase the size when a workbook is precalculated and mailed?
    Thanks in advance.
    Cj

    Hi,
    Please refer this link for the same -
    Re: error  Entry is too long  is displayed for the text edit
    Regards,
    Lekha.

  • Will not export because the film is too long

    Help. When I try and export my film and it gets to the end of the prosses it stops and say unable to publish because my film is too long. Someone help me.
    Kind Regards,
    Taylor

    It would seem logical to expect you to include information on the length of the film!
    Export to where/what? Using what codec?
    Also the version of iMovie you are using.

  • Page takes too long to load because of videos

    Hi. I have a website that I made, but the page takes too long to load because there are videos on it. Is there any way to stop the videos from auto-loading and instead only load when someone clicks on them to play?

    There are several ways to have videos on a page without having them load until they are selected to play. A couple are:
    1 - Opening Item in a New, Precisely Sized Window. This test site has 9 videos on the page: PhotoPresenter Animated Slideshow Themes.
    2 - QT Movies via Export for Web in QT Player. This method is more difficult to implement.
    OT

  • Trying to restore a lost Thunderbird profile, but can't "move profile" because filenames are too long

    I'm having a problem with Thunderbird that is addressed in several postings here and on "mozillaZine," but in trying to follow the instructions given for fixing it, I have run into a new problem that I don't see addressed. The original problem is the one described in this thread, where my folders and everything have just vanished, and I'm prompted on startup to create a whole new profile:
    https://support.mozilla.org/en-US/questions/1040003
    Following the links in that thread, I get to this -- and since my address book has also apparently disappeared, I click the internal link to the section headed "Lost Profile":
    http://kb.mozillazine.org/Recovering_a_profile_that_suddenly_disappeared
    Step 1 then sends me here:
    http://kb.mozillazine.org/Moving_your_profile_folder_-_Thunderbird
    Step 2 on that page says, "Copy the profile folder to where you want to store it." When I try to do that, though (using Windows Explorer on Windows 7), it gets partway through the copying and then hangs up because it runs into a filename that is too long to copy. And according to the prompt that tells me this, there are many more such long filenames still to come.
    Do I ignore this error and just skip those files? That means the profile copy won't be complete, which I would think would be dangerous and/or would just cause further errors. Or is there some simpler way altogether to do what I originally set out to do, which is recover the profile that just mysteriously disappeared?
    Again, I'm running Thunderbird on Windows 7, and had been using it for years without ever before encountering this extremely irritating glitch. I'll be grateful for any help.

    I very much appreciate both these answers and will save them for future reference if needed. The problem seems to be resolved, although not for any reason I can explain. What happened was that I suddenly had three problems all in the same 24 hours or so: a very slow, almost unusable internet (I thought connected with my "IPv6 Connectivity"), then the Thunderbird crash, then Google Chrome not starting. Whether and how these are all related, I don't know. Anyway, while I was sitting here unable to get e-mail or get back into this forum, I decided to try a System Restore just for the heck of it, even though someone else had reported this not working. And it too seemed to fail, at first, giving me an error message that said the system couldn't be restored due to an "unknown error." But clearly at least part of it worked, because I am seeing some earlier settings, and Thunderbird then started -- almost normally, except for needing my passwords entered again.
    So I'm running "MozBackup" now in hopes of having the profile readily available next time this problem comes up. Also, Chrome is now working again after I did something or other with the security settings, and the internet seems normal even though my IPv6 status still shows "No network access." I really don't know what's been going on, but for whatever reason everything seems fixed. For now. :-S
    Again, I'm sincerely grateful for your efforts to help me. Now that I'm a member of the forum I'll try to do the same for someone else.

  • Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust one and then have to copy and paste this length.

    Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust a text clip and then have to copy and paste this each time. Ideally, there should be something in User Preferences but there is not. Thanks.

    Maybe some one else can pipe up with a solution, but this would literally take 2 seconds to do for a new project.  And you can create a "template project" that includes this "text" clip.  Save this project and then to a get info and check "stationary pad."  When you double click on this file, fcp will open with a copy of this project and you just need to do a save as. 
    I've been working with computer editing systems for longer than i can remember and at a certain point you just have to adapt your workflow to the limitations of the software.  

  • Show end of label text when String is too long

    I have a JLabel with a string in it, but the string is too long for the label, and only the first part of the string is visible.
    How can I make the label show the end of the string?

    I use the field as a rollover helper. When the mouse rolls over a cell or column in a table, it shows the value in the textfield.
    Now, when the field gets a new value, it flickers because it first enters the string and shows it from the beginning and then scrolls to the end, causing a flicker.
    Is there any way I can get around this?

  • Unable to prepare project for publishing. the project could not be prepared for publishing because an error occurred. (project is too long)

    I have an imovie project that is less than 20 minutes long. i tried to publish it a couple of times and it seemed like it was finished but it never published. i tried one more time and got an error message saying "unable to prepare project for publishing. the project could not be prepared for publishing because an error occurred. (project is too long)". i know the project isnt too long. i am trying again but the error message only comes up after i waited 2 hours for it to finish publishing. PLEASE HELP

    oh and ive tried publishing to almost everything. straight to idvd, to media browser, i tried both hd qualities and also the large quality. no luck with any of those

  • Legend item text too long

    Hello.
    Question to Flex guru:
    I have too long text in Legend for chart. How can I do line
    folding or how can I show toolTip for legend item (like for a Label
    object)?
    How can I initialize Legend object with array of LegendItem
    objects?
    Sorry for my english :)
    Thanks in advance.

    Im not sure what your asking exaclty as my english is bad
    too, however i know that the label will only show one line of text,
    for wordwrap or multiple lines i think you need to use the "Text"
    control.

  • Ring Item text string too long to display all - use ellipses ?

    The width of my Ring control is not wide enough to display all characters in the Item text string.  LabVIEW simply truncates the text with no indication that additional text is present.  Is there a way to display an ellipses in such cases ?  For example :
    "Ring text string that is too long"
    that is now shown as :
    "Ring text string that i"
    could be shown as :
    "Ring text st...too long"

    A couple of suggestions:
    1.) Use property nodes to determine which strings are too long, then concatenate the strings with ellipses.
    2.) Increase the height so the text wraps.
    "There is a God shaped vacuum in the heart of every man which cannot be filled by any created thing, but only by God, the Creator, made known through Jesus." - Blaise Pascal

  • Text information being displayed too long.

    Hi, I have a database table containing text information. I
    want to displayt this information on a webpage but when I try to do
    so the text doesnt break as soon as i want it to, so it looks
    something like this:
    the inforamtion from my database is being displayed way too
    long. I want
    it to break sooner.
    instead of how i want it to be shown, like this:
    the information from my database
    is being displayed way too long I
    want it to break sooner.
    if anyone could help me with this I would really appreciate
    it. Thanks.

    ...And since we're not in the early 90's anymore, we kindly
    forget tables when it comes to representing any data that is not
    in... errr... a table :-)
    <style type="text/css">
    .properwidth {width:300px}
    </style>
    <div class="properwidth">
    #longtext#
    </div>

  • Exclamation mark says text too long...but it's not

    My captions are 2 lines long, and they fit in the caption box. But I get an exclamation mark anyway -- the text warning that means (I think) "text too long."
    When I print the book on my color printer, all the text appears just fine.
    So here's question 1: If I try to send a book with text warnings, will Apple reject the file until I have made the warnings go away?
    And question 2: If the captions print just fine on my printer, are they likely to print just fine at Apple?
    Many thanks!

    When you order the book, a PDF will be created. That PDF is what gets uploaded to Apple (via Kodak) for printing. So the best way to check your book before ordering is to create a PDF, then inspect it. Chances are, what you see in your PDF is what you will get printed.
    To do this, select your book and do File > Print. You'll get an "Assembling book" progress bar. That can take several minutes. When done, you get the Print Dialog box. Click the PDF button and choose "Save as PDF..." Choose a name and location for the file (the Desktop is convenient) and Save. Then switch to the Finder and open that PDF in Preview.
    While I have not observed (or even tried to observe) for myself, I have read here from others that the PDF created this way may differ slightly from the one created by selecting Preview in the first Print dialog, and that it will more closely predict the final ordered book.
    My captions are 2 lines long, and they fit in the caption box. But I get an exclamation mark anyway -- the text warning that means (I think) "text too long."
    I have that warning on one of my text boxes, too. It looks fine in iPhoto, fine in the PDF, and printed fine when I ordered the book from Apple.
    Regards.

  • I've stuck with Entourage way too long. Now I don't dare install the Mavericks OS because all my Entourage files will go away. And my iMac won't open Mac Mail (probably because I've never opened it in the 5 - 6 years I've owned the Mac.) Any suggestions?

    I've stuck with Entourage way too long. Now I don't dare install the Mavericks OS because all my Entourage files will go away. And my iMac won't open Mac Mail (probably because I've never opened it in the 5 - 6 years I've owned the Mac.) Any suggestions?

    If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
    If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
    As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
    If there are specific tasks you need help with:
    http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
    Is a good resource.
    Peter

  • Custom Webdynpro text field is taking too long to accept input values

    Dear All,
                   I hvae created custom web dynpro for PO header fields in SRM. This WD contains a lot of fields. When i try to put cursor on a text field it is taking too long for the cursor to appear in that input text field. There is no problem with other fields which have search helps associated with them. This field with the problem is just a text field.
    Please help.
    thanks.

    Dear All,
                   I hvae created custom web dynpro for PO header fields in SRM. This WD contains a lot of fields. When i try to put cursor on a text field it is taking too long for the cursor to appear in that input text field. There is no problem with other fields which have search helps associated with them. This field with the problem is just a text field.
    Please help.
    thanks.

Maybe you are looking for