ICal sudden extreme lag and eating up all memory in week mode

This was intented to be a question but I found out the answer by the time I finished writing it so if someone out there gets the same problem, I hope this can help them.
I use iStudiez for all my school stuff so I didn't use iCal a lot recently. However, when opening it today, everytime I tried changing weeks in week mode, iCal would lag badly and stop responding for several seconds, eating all the available RAM in the process. I tried to force quit, but the problem reappeared every time.
Turns out iCal doesn't seem to handle "long" events very well. I had a "Nothing" event starting on December 21st, 2012 and ending several years later, and deleting it caused the lagging to stop. I guess iCal tries to load the whole event when it appears in the week view.
Hope this post helps someone or alerts Apple to issue a fix. (I use the latest version of iCal on the latest build of OSX, which as of today is iCal 6.0 on OS X 10.8.2)

Seven ways to free up drive space
Where did my Disk Space go?
Slimming your hard drive
OmniDiskSweeper is a free utility that checks HD space.
FreeSpacecost $1 or is a free utility that checks HD space.
SpaceControlis a free utility that checks HD space.
FreeSpacecost $.99 - FreeSpace shows you how much space is available on all local, connected, and network drives with a single click.

Similar Messages

IMac CPU3.06 GHz Intel Core 2 Duo, 8GB, Extremely slow and repeatedly "out of Memory" since migration from Mountain Lion to Mavericks

Dear Apple Support Community.
As mentioned by a number of users reporting the same problem, my 2009 iMac CPU3.06 GHz Intel Core 2 Duo, 8GB RAM, has become extremely slow and repeatedly "out of Memory" since it was migrated from Mountain Lion to Mavericks (OS 10.9 then OS 10.9.1).
I have already run CleanMyMac, deleted 5GB of useless stuffs, which did not translate into any improvement. Following the advices collected in other Apple Support Community threads, I have applied EtreCheck the outcome of which is provided below.
For information, I have also upgraded my 2011 MacBook CPU2.3 GHz Core i7, 8GB which became only a bit slower than before, sometimes freezing which it almost never did before. However, I am used to the fact that Mac get usually slower and more prompt fo freeze after upgrading to a more recent OS.
Both my 2009 iMac and my 2011 MacBook have F-Secure installed. So the problem with the 2009 IMac is unlikly to be due to the presence of F-Secure. Interestingly, the few abnormalities found by Etrecheck were exacly identical before I ran CleanMyMac. There are two more findings (mentioned below) since I ran CleanMyMac on the 2009 iMac, which again didn't improve the problem.
So please find below the details of the EtreCheck experience and some additional measurements made with iStat while running EtreCheck:
Hardware Information:
iMac (24-inch, Early 2009)
iMac - model: iMac9,1
1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information:
ATI Radeon HD 4850 - VRAM: 512 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 2:40:57
Disk Information:
WDC WD1001FALS-40K1B0 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
XooS5 HD (disk0s2) /: 999.35 GB (189.85 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5670S
USB Information:
Apple Inc. Built-in iSight
Canon CanoScan
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
WD My Passport 071D 800mbit - 800mbit max
EFI (disk1s1) <not mounted>: 209.7 MB
disk1s2 (disk1s2) <not mounted>: 2 TB
Boot OS X (disk1s3) <not mounted>: 134.2 MB
Thunderbolt Information:
Kernel Extensions:
com.f-secure.kext.fsauth          (1.0.0d1)
Problem System Launch Daemons:
[failed] com.apple.wdhelper.plist [REMARK: this abnormality appeared only after running CleanMyMac. It does not appear on my 2011 MacBook]
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[invalid] com.bjango.istatlocaldaemon.plist [REMARK: this abnormality pre-existed to running CleanMyMac. It appears also on my 2011 MacBook]
[loaded] com.f-secure.fsavd.dbhelper.plist
[loaded] com.f-secure.fsavd.plist
[loaded] com.f-secure.fsmac.firewall.plist
[loaded] com.f-secure.fsmac.fsupdated_guts2.plist
[loaded] com.f-secure.fsmac.licensetool.plist
[loaded] com.macpaw.CleanMyMac2.Agent.plist
Launch Agents:
[loaded] com.babylon.activation.plist
[loaded] com.bjango.istatlocal.plist
[loaded] com.f-secure.relauncher.plist
[loaded] com.f-secure.trasher.plist
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist
[loaded] com.google.keystone.agent.plist
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist
User Login Items:
iTunesHelper
Dropbox
F-Secure Anti-Virus for MAC
3rd Party Preference Panes:
Flash Player
Internet Plug-ins::
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.04 - SDK 10.6
AdobePDFViewer: Version: 11.0.04 - SDK 10.6
DivXBrowserPlugin: Version: 2.1
Flash Player: Version: 11.9.900.170 - SDK 10.6
OfficeLiveBrowserPlugin: Version: 12.2.8
Google Earth Web Plug-in: Version: 6.1
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
User Internet Plug-ins::
Picasa: Version: 1.0
Bad Fonts:
None
Old applications:
None
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
XooS5 HD: Disk size: 930.71 GB Disk used: 753.90 GB
Destinations:
XooS5 TM [Local] (Last used)
Total size: 2
Total number of backups: 32
Oldest backup: 2013-09-15 01:11:39 +0000
Last backup: 2013-12-07 12:48:45 +0000
Size of backup disk: Too small. Backup size 2 < (Disk used 753.90 GB X 3)
Time Machine details may not be accurate. All volumes being backed up may not be listed.
REMARK: The above finding is unlikely to be accurate. In fact, my Time Machine is supported by a 2TB WD My Passport Studio external HD connected with a Firewire 800. As mentionned, only 754GB of the 2000GB are used.
Top Processes by CPU:
5%          backupd
5%          Mail
5%          WindowServer
3%          Finder
3%          Dropbox
Top Processes by Memory:
1.60 GB          mds_stores REMARK: this item was marked in red in the outcome of EtreCheck, so I assume there is something wrong there
82 MB          Finder
74 MB          Mail
49 MB          softwareupdated
49 MB          Dropbox
Virtual Memory Statistics:
97 MB          Free RAM
1.21 GB          Active RAM
1.19 GB          Inactive RAM
1.21 GB          Wired RAM
1.83 GB          Page-ins
36 MB          Page-outs
Please find now some additional measurements collected with iStat while running EtreCheck:
Practically:
The iMac can work slowly with only one software e.g. either Mail or Safari or Firefox, but still the below "out of Memory" message occurs about every 3 minutes.
Aperture has becomre to slow to be useable
If trying to write a mail (with Mail) while Safari or Firefox is open, then the "out of Memory" message occurs about every 20 seconds so I need to check on "Resume" several times per minute.
Conclusions
From the above, unless anyone in the Apple Support Community proves to be able to identify a specific problem leading to a way to find a cure, I tend to conclude that Mavericks is not suitable for computers operating with a Core 2 Duo CPU even with a 8GB of RAM.
Unless I missed something, I did not see any warning from Apple Computer Inc. informing their customers they should refrain from upgrading Core 2 Duo Computers.
The only solution I see so far is to downgrade from Mavericks to Mountain Lion. And the Apple Support Community would confirm that it is the only solution, I would appreciate to get your guidance on how to proceed.
Intended action plan
Migrate the above 2009 iMac to a 2014 Mac Mini Server operating on Mavericks to ensure that no data may be lost while downgrading to Montain Lion.
Provided the above downgrading operation is successful, assign this 2009 iMac to partial retirement e.g. Mail, Skype, iTunes and DVD player.
In advance, I would like to thank the Apple Community for helping me either i) finding a cure to the problem, ii) or confirming that Mavericks cannot operate properly on Core 2 Duo computers, iii) and in such a case, guiding me on how to downgrade to Mountain Lion.
Yours sincerely
Core

... what anti-virus would you recommend using?
Use what is already included with OS X. It already includes everything it needs to protect itself from viruses and malware. Keep it that way with software updates from Apple.
A much better question is "how should I protect my Mac":
Never install any product that claims to "speed up", "clean up", "optimize", or "accelerate" your Mac. Without exception, they will do the opposite.
Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources. Illegally obtained software is almost certain to contain malware.
Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iTunes or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
Don’t install browser extensions unless you understand their purpose. Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
Don’t install Java unless you are certain that you need it:
Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
Disable Java in Safari > Preferences > Security.
Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
Block browser popups: Safari menu > Preferences > Security > and check "Block popup windows":
Popup windows are useful and required for some websites, but popups have devolved to become a common means to deliver targeted advertising that you probably do not want.
Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
If you ever see a popup indicating it detected registry errors, that your Mac is infected with some ick, or that you won some prize, it is 100% fraudulent. Ignore it.
Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
The most serious threat to your data security is phishing. To date, most of these attempts have been pathetic and are easily recognized, but that is likely to change in the future as criminals become more clever.
OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind.

Adobe premiere cs6 suddenly EXTREMELY slow and CPU intensive

Hi everyone,
I'm editing candon 5d mk III footage (h.264 files) on my late 2011 MacBook pro. Here are the specs..
240 gig SanDisk SSD harddrive (190 gigs free)
500 Gig (250 gigs free)
8 gigs ram
2.4 ghz i5 processor
Intel HD graphics 3000 graphics card
I'm a wedding videographer and I am currently closing my last edits of the season. I have edited 20+ 45 minute videos on Adobe Premiere CS6 and have had absolutely no issues at all. I enjoy working on premiere so much that I've been trying to get my videographer friends to give a shot and simplify their workflows.
Upon starting my second to last edit (same process as the other 18 videos I've done this season, organizing the footage within it's respective folder, loading it into premiere with the couples' choice in music and opening 4-5 new sequences based on the events of the day) I noticed that I was having a lot of trouble importing folders into my media bin. I had to import all of the footage unorganized because loading the folders "Preperation, Ceremony, Photos, Reception" with the footage within them would cause premiere to freeze and become unrepsonsive. So, finding no solution I added all the footage in no particular fashion. Just one large unorganized group. Then, while organizing the files into bins, I noticed even the smallest move would take several minutes to complete. Because I was working directly off of my hard drive I figured these kinds of delays would eventually catch up to me, so I moved all of my files to my HDD and decided to work on them there. The project itself continued to be extremely slow and started crashing regularly (especially when applying audio effects). After a few hours, I stopped being able to play 1080p video at all. It would jam and stutter so often it become unuseable. 720p video was the next to go along with my ability to render anything in less than 30 minutes - 1 hour. At last attempt to use premiere I was getting an "Unable to compile movie - Unknown Error" message when trying to render alpha channel things (lower third titles and things of the nature), my ability to change the resolution of the playback had disappeared (Going from full, 1/2 and 1/4 did nothing, it just remained at full quality) and finally doing anything in premiere caused it to use 300% of my CPU (based off of my Activity Monitors metering).
Does anybody have any clue as to what could be happening to my machine/program? I have a yearly subscription to adobe's creative cloud service if that helps. Oh and I've tried moving my media cache's from my HDD to my SDD with little or no results. Don't know if that helps.
Thank you to anyone who helps in advance. What I believe to be clean installs aren't doing anything so I'm hoping somebody can give me a hand.

Sounds to me like specific media is dragging the Mac to a halt. (300%, really Apple? Isn't that like saying that my car can go up to 90mph, but last night I drove it at 300% speed, 270mph)
Some things to trouble shoot:
Do you have any assets in the project that are loaded directly from strange devices, like a SD card or CD audio? Any dynamic link media that may be problematic?
Is there anything that makes this footage different than footage from successful projects?
Can you work successfully with an old project?
Can you successfully start a new project using different or less media?
Is the 500 GB drive internal or external?
One time I was sent out at from work to troubleshoot a system that would freeze up like yours. The guy was an idiot and rude client that demanded that someone from our facility help him fix his own project. He said that he had been troubleshooting for a day, and then had convinced his organization's IT guy that he needed a way over spec new pc to run Premiere.
His system was fine. Within 3 minutes of checking media in his project, I saw that top track of the problem sequence had a video clip that was set to a speed of .01%, and he had the clip stretched for 24hours in the sequence. His project was supposed to be a 2 minute PSA. All his issues went away after removing the idiotic Day Long slow motion clip. He complained to my boss because I had laughed at him.
I relate that story to illustrate that it could be a weird thing with you media or fx, just as well as a hardware or software issue.
Good Luck

Sudden, unexplainable lag and performance problems making gaming impossible

Last week I was happily gaming with all the settings on high. I went away for the weekend and when I came back, it is absolutely impossible to play because of lag. When I put all the settings at their very lowest, it is almost possible to play but, of course, the images look terrible. What happened?!
I have a dv7t-6000 pavilion. I tried installing the latest drivers for my graphics card, but when I did that the game was simply a black screen and wouldn't pull up at all, so I uninstalled them. Now it runs, but only just. I have all updates for Windows 7 64-bit.
I'm still under warranty, do I need to ask for a new video card, or what?

Give me your graphics card specifications and name. Most likelyl it's the switchable graphics issue, like in many of the other HP laptops out there. What you can do, if you are still under the 21 day return period, is that you can return you laptop and exchange it for another laptop, or gert a full refund altogether. I would recommend this since HP is not a great gaming notebook brand.

Macbook Pro 10.7 - Suddenly extremely slow and freezes

Hi, I've had my Macbook for about a year now and never had any problems up until now. All of a sudden today I turned on my Macbook Pro (running 10.7.1) and it took about a minute and 20 seconds to boot up. Once the desktop background picture shows up, the dock will come up about 5 seconds later, then the top bar 5 seconds later, then all of the icons on my desktop about 5 seconds later. If I click on ANYTHING the spinning beachball will come up and then changes back to the mouse icon in about a minute. I can't open any applications in the dock or open any folders, nothing happens and then the beachball comes back. I have tried booting in safe mode and that seems to work okay, but still a little slower than normal. Checked the activity monitor and nothing major seems to be going on. Reset PRAM, nothing changed. Checked disk utility and everything was fine. If anyone has any idea what might be wrong, please help me out here. I appreciate it, and thank you!

This seems like a very common issue! I purchased the OS X Lion the very next day after its release.. used it for a few days on my Macbook Pro.. I also updated all my applications (adobe, office, ilife etc) to make it run smoothly and compatible on the Lion.. but after a month or so, my machine became like the first macintosh Mr. Jobs made.. VERYYY SLOOWW!!!!! it would take 5-7 minutes to boot up, and the dock wud also take time!! The beach ball occupied my screen so much time, that I even forgot how the normal cursor looked like!
I decided to upgraded my RAM to 8GB, but same problem! I had like thousands of mails and didnt even find any solution to downgrade back to leopard!
I wasted almost a week to re-install snow leopard and all my applications!! and luckily google apps saved me with all my mails! Since then I have been ignoring every single update! I am happy with snow leopard!!
LION IS VERYY BUGGY! I wasted my $30 odd bucks!!! I often search for freezing beach ball lion!!! and seems there is no solution till now... NEVER GOING TO UPGRADE!!!

Extremely slow and high latency all day.

DSL is running extremely slow during peak hours from 12 afternoon to 12 midnight. Lower than 50% of rated speed and high latency
I have been frustrated with this DSL Service for months now. I am considering contacting BBB to file a complaint and I am tired of dealing with customer service giving me the run around. Internet is a monopoly in my area therefore verizon feels it doesn't have to do anything to keep its customers when they provide crappy service. I am on waitlist for another internet service provider and it is going to take almost a year because of how bad the internet options are in the area and demand for better options. I even had to pay over 100 dollars to get a truck roll come to my house to fix any issues within the house and the internet has not gotten better. Atleast I feel I should get a refund or something.
Here is my speedtest result just now. http://www.speedtest.net/my-result/2899553407
It has been even slower at other times. http://www.speedtest.net/my-result/2893509440
Modem is Westell 6100 or something.
Transceiver Statistics
Transceiver Revision:
7.2.3.0
Vendor ID Code:
4
Line Mode:
G.DMT Mode
Data Path:
Interleaved
Transceiver Information
Downstream Path
Upstream Path
DSL Speed (Kbits/Sec)
3360
864
Margin (dB)
15.5
13.0
Line Attenuation (dB)
21.5
13.0
Transmit Power (dBm)
7.6
11.9
Giganews line info
news.giganews.com
traceroute to {edited for privacy}, 30 hops max, 60 byte packets
1 gw1-g-vlan201.dca.giganews.com (216.196.98.4) 0 ms 0 ms 0 ms
2 ash-bb1-link.telia.net (213.248.70.241) 0 ms 0 ms 0 ms
3 TenGigE0-2-0-0.GW1.IAD8.ALTER.NET (63.125.125.41) 3 ms GigabitEthernet2-0-0.GW8.IAD8.ALTER.NET (63.65.76.189) 3 ms TenGigE0-2-0-0.GW1.IAD8.ALTER.NET (63.125.125.41) 3 ms
4 P1-8-0-0.LSANCA-LCR-21.verizon-gni.net (130.81.151.237) 72 ms 72 ms 72 ms
5 P9-3.LSANCA-LCR-01.verizon-gni.net (130.81.193.123) 75 ms P8-0.LSANCA-DSL-44.verizon-gni.net (130.81.35.133) 75 ms 76 ms
6 * * *
7 * * *
8 * * *
9 * * *
10 * * *
11 * * *
12 * * *
13 * * *
14 * * *
15 * * *
16 * * Max number of unresponsive hops reached (firewall or filter?)
news-europe.giganews.com
traceroute to {edited for privacy}, 30 hops max, 60 byte packets
1 vl201.gw1.ams.giganews.com (216.196.110.3) 0 ms 0 ms 0 ms
2 te7-8.ccr01.ams05.atlas.cogentco.com (149.11.104.17) 0 ms te7-7.ccr01.ams05.atlas.cogentco.com (149.11.104.9) 0 ms te7-8.ccr01.ams05.atlas.cogentco.com (149.11.104.17) 0 ms
3 te0-7-0-16.ccr21.ams03.atlas.cogentco.com (154.54.72.42) 0 ms 0 ms 0 ms
4 te0-3-0-0.ccr21.lon13.atlas.cogentco.com (130.117.48.141) 8 ms 8 ms te0-2-0-0.ccr21.lon13.atlas.cogentco.com (154.54.28.158) 8 ms
5 te0-7-0-4.ccr21.jfk02.atlas.cogentco.com (154.54.84.125) 90 ms te0-0-0-4.ccr21.jfk02.atlas.cogentco.com (154.54.84.129) 90 ms *
6 te0-3-0-6.ccr21.dca01.atlas.cogentco.com (154.54.41.5) 96 ms te0-0-0-2.ccr21.dca01.atlas.cogentco.com (154.54.25.238) 96 ms te0-2-0-7.ccr21.dca01.atlas.cogentco.com (154.54.41.1) 96 ms
7 be2042.ccr21.iad02.atlas.cogentco.com (154.54.26.126) 97 ms 97 ms 97 ms
8 uunet.iad01.atlas.cogentco.com (154.54.13.138) 99 ms verizon.iad01.atlas.cogentco.com (154.54.10.226) 105 ms 105 ms
9 P0-8-0-0.LSANCA-LCR-22.verizon-gni.net (130.81.29.127) 177 ms 178 ms P1-0-0-0.LSANCA-LCR-21.verizon-gni.net (130.81.199.39) 174 ms
10 P8-0.LSANCA-DSL-44.verizon-gni.net (130.81.35.133) 175 ms P9-3.LSANCA-LCR-02.verizon-gni.net (130.81.193.109) 187 ms 182 ms
11 * * *
12 * * *
13 * * *
14 * * *
15 * * *
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
21 * Max number of unresponsive hops reached (firewall or filter?)
Here is what ICSI Netalyzer Results have stated.
Network Access Link Properties + –
Network performance (?): Latency: 580 ms, Loss: 15.5% –
The round-trip time (RTT) between your computer and our server is 580 ms, which is somewhat high. This may be due to a variety of factors, including distance between your computer and our server, a slow network link, or other network traffic.
We recorded a packet loss of 16%. This loss is very significant and will lead to serious performance problems. It could be due either to very high load on our servers due to a large number of visitors, or problems in your network. Of the packet loss, at least 14.0% of the packets appear to have been lost on the path from your computer to our servers.
TCP connection setup latency (?): 720ms –
The time it takes for your computer to set up a TCP connection with our server is 720 ms, which is quite high. This may be due to a variety of factors, including a significant distance between your computer and our server, a particularly slow or poor network link, or problems in your network.
Background measurement of network health (?): 3 transient outages, longest: 0.8 seconds –
During most of Netalyzr's execution, the client continuously measures the state of the network in the background, looking for short outages. During testing, the client observed 3 such outages. The longest outage lasted for 0.8 seconds. This suggests a general problem with the network where connectivity is intermittent. This loss might also cause some of Netalyzr's other tests to produce incorrect results.
Network bandwidth (?): Upload 700 Kbit/s, Download 2.3 Mbit/s +
Network buffer measurements (?): Uplink 5400 ms, Downlink 1200 ms –
We estimate your uplink as having 5400 ms of buffering. This is quite high, and you may experience substantial disruption to your network performance when performing interactive tasks such as web-surfing while simultaneously conducting large uploads. With such a buffer, real-time applications such as games or audio chat can work quite poorly when conducting large uploads at the same time.
We estimate your downlink as having 1200 ms of buffering. This is quite high, and you may experience substantial disruption to your network performance when performing interactive tasks such as web-surfing while simultaneously conducting large downloads. With such a buffer, real-time applications such as games or audio chat can work quite poorly when conducting large downloads at the same time.
HTTP Tests + –
Address-based HTTP proxy detection (?): OK +
Content-based HTTP proxy detection (?): OK +
HTTP proxy detection via malformed requests (?): OK +
Filetype-based filtering (?): OK +
HTTP caching behavior (?): OK +
JavaScript-based tests (?): OK +
DNS Tests + –
Restricted domain DNS lookup (?): OK +
Unrestricted domain DNS lookup (?): OK +
DNS resolver address (?): OK +
DNS resolver properties (?): Lookup latency 520 ms +
Direct probing of DNS resolvers (?): +
DNS glue policy (?): OK +
DNS resolver port randomization (?): OK +
DNS lookups of popular domains (?): OK +
DNS external proxy (?): OK +
DNS results wildcarding (?): Warning –
Your ISP's DNS server returns IP addresses even for domain names which should not resolve. Instead of an error, the DNS server returns an address of 199.101.28.20, which resolves to search.dnsassist.verizon.net. You can inspect the resulting HTML content here.
There are several possible explanations for this behavior. The most likely cause is that the ISP is attempting to profit from customer's typos by presenting advertisements in response to bad requests, but it could also be due to an error or misconfiguration in the DNS server.
The big problem with this behavior is that it can potentially break any network application which relies on DNS properly returning an error when a name does not exist.
The following lists your DNS server's behavior in more detail.
Please help. I am so frustrated I literally have fights with my family over internet problems. I am right now looking for other options and even starting to think about paying over 100 a month for dedicated line or T1 if they can service my area.

Not a single response from Verizon on this? And after you posted the tests & information they will need? I think I may have to make a service choice soon. Its bad enough Verizon can't post a simple email address for our support, they have removed Usenet access, removed access to our websites (I use HTML so their sitebuilder is useless)... Sheeshe...

I have hp 4050TN laser print. it was worki ng fine 4 days ago and suddenly stoped printing and is saving all printing orfers. i tried to figure out. i am gettinhg the message that apple-talk is turned off and has to be turned on. what is apple talk? i

my mac is unable to connect to my printer hp4050 laser tn. message i get is apple link is not connected to communicate with the printer. i went to system preferences but could not turn on the apple link. i am very new to mac. in pc. i could figure out and fix the problem but in mac i have no clue at all what to do? it has been almost a week trying without success. help?

Your operating system, Snow Leopard (OS X 10.6), does not support AppleTalk. Instead, in Snow Leopard the HP 4000 series printers need to be set up to communicate via IP.
Go to System Preferences and open the Print & Fax item. Is your printer listed in that pane?

Extreme lag and restarts itself (on GE60)

My GE60 has some issues..
So after I use my laptop for about few hours (3 - 4), not gaming, just using Skype and Internet Browser, it starts to get extreme laggy then a black screen appears. When I press Ctrl Alt Del, it won't respond. So I have waited for about 30 minutes, it sometimes shows "The logon process was unable to display security and logon options when ctrl alt delete was pressed" or it doesn't respond so I have to force shutdown. And by sometimes I mean this happens A LOT!! I have tried a lot of things. Defrag, Virus check, drive check (optimize), registry, netsh winsock reset, sfc /scannow (then applied fix), chkdsk /f...
However I just got this problem AGAIN
This time the message "The logon process was unable to display seucrity and logon options... " did not pop out but the system RESTARTED BY ITSELF
Seriously, why do I have this issue.. Its a newly bought laptop.. I have checked task manager and there was no process taking lots of memory. So I can't figure out what the problem really is.. Please help me

I found the solution...
It wasn't a virus, a wrong update, or corrupted graphic driver...
It was a problem with hard drive. Not as physically.
So the problem was in Intel Rapid Storage Technology.
In there, if you look at performance tab, there is Link powermangement option.
I think that option makes the hard drive to sleep or something when inactive to save battery
but when I move my mouse or keyboard to on the laptop again, it doesn't respond and I have to force shutdown using power button
I think my hard drive is not compatible with that option so it is having problem every time in idle for a hour...
Solution: Disable Link powermanagement option in Intel Rapid Storage Technology
I hope it helped anyone facing the same problem

My phone is running extremely slow and eating the battery

I've been experiencing this problem for the past 3 days and went to my provider today to ask about.
My phone has been running extremely slow, the hour clock thing is forever running, and as a result my phone dies in about 3 to 4 hours with no real use. I was told it was because i need to update my OS but when I came home and plugged it in it says that my phone is up-to-date and there is no OS upgrade available. i bought a replacement battery to see if that was the problem and it is not. this is becoming quite frustrating. it has even gotten to the point of when i lock the phone i cant unlock it over even get the screen to turn on. the only way to turn it on is to pull the battery out and put it back in.
What is wrong with my phone?
Solved!
Go to Solution.

Hello maddy 22
Welcome to the Community
That Hour clock appear because of many reason like running application in the background , low memory etc. As your device is already upto date so to resolve the issue please Reload your Device OS it will fix the problem ,follow this Knowledge base :
KB11320 : How to perform a clean reload of the BlackBerry Device software using BlackBerry desktop software for windows .
After Reloading your Device Software you must go through this Knowledge Base , because it will help you in long run and to avoid such problem in future.
KB14320 How to maximize battery life and free memory on the BlackBerry smartphone.
Please try it and let us know.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Phone is running extremely slow and eating the battery

I've been experiencing this problem for the past 3 days and went to my provider today to ask about.
My phone has been running extremely slow, the hour clock thing is forever running, and as a result my phone dies in about 3 to 4 hours with no real use. I was told it was because i need to update my OS but when I came home and plugged it in it says that my phone is up-to-date and there is no OS upgrade available. i bought a replacement battery to see if that was the problem and it is not. this is becoming quite frustrating. it has even gotten to the point of when i lock the phone i cant unlock it over even get the screen to turn on. the only way to turn it on is to pull the battery out and put it back in.
What is wrong with my phone?

Hello maddy22,
Welcome to the forums.
In this case we can try to reload the software on the BlackBerry® smartphone to make sure it is running the latest version and there are no issues with the OS.
Here is how to backup your BlackBerry smartphone http://bbry.lv/oPVWXc
Once you have backed up your BlackBerry smartphone please follow the link below to complete a clean reload of the BlackBerry smartphone software.
Link: http://www.blackberry.com/btsc/KB03621
Once completed test it and proceed with a selective restore, here is how to restore http://bbry.lv/qgQxLo
Thank you
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Latest up date with plugin container has made firefox lag and eating memory and cpu

plugin container using 5% cpu constantly, firefox using 150 - 300k ram, also plugin container not closing when firefox does causing shut down to fail have to use controll alt delete
== URL of affected sites ==
http://http://apps.facebook.com/inthemafia/

Flash games cause Firefox Plug-in container to hang. The problems started as soon as the plug-in container became a part of Firefox two updates ago.
Memory usage is up to 3 times what Firefox itself is using and when the hangs occur, the plug-in container is using in excess of 50% of the computer's memory. At this point, I need to switch to a different browser to play these games for longer than a few minutes at a time.

Does it mean anything when the iCal suddenly opens up and there are no events scheduled on that day?

I didn't open it. Should I get my computer checked?

I didn't open it. Should I get my computer checked?

Freezing and wipe of all memory of my Tungsten E HELP!!!!

HELP! I have a Tungsten E and when I turn it on it lasts for a few hours and then it freezes and shuts off. After I charge it up again and turn it on everything has been reset and all the contacts and any notes or information at all I put into it is gone and I have to re do everything.
Is this a common problem with Tungsten E? Does anyone know what could be wrong and how or where I can go to get it fixed? HELP please!
Post relates to: Tungsten E

It's not a common problem with the E, but any PDA whose battery is depleted will experience this (unless it is of a newer NVRAM design like the E2, Z22, and TX).
When it gets reset (all info gone) does it show the same behavior before you HotSync all the data back to it? I'm asking because a software-related problem may be saved on your PC in the HotSync folder for your user name.
If the E still freezes and dies while in the "brand new" condition, then it sounds like your battery is shot. Batteries and repairs can be found at several websites - usedpdaparts.com and directfix.com are two.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Cfgrid eating up all memory

I'm currently developing an application which makes use of
the new ajax CFGRID, displayed in a CFWINDOW.
I've noticed that with each page containing a grid,
iexplorer.exe uses more and more memory (on the client side). Even
a simple page refresh clearly shows the memory usage going up every
time. Users end up with an unresponsive IE after about twenty
minutes of working with the app because of their memory running
low.
This is of course unacceptable behaviour. Has anyone found a
solution for this problem?

Steps to reproduce the problem:
1. save the following code as test4.cfm
2. run the code, the page will refresh every 2 seconds
(mimics a user browsing on your website)
3. press ctrl-alt-del, open the task manager, find the
iexplore.exe task and watch the mem usage going up!
<cfif not isdefined('url.cfgridpage')>
<meta http-equiv="refresh" content="2">
Browser memory test - clearly shows the cfgrid leaking!
<cfform>
<cfgrid name="browseGrid" format="html"
bind="url:test4.cfm?cfgridpage={cfgridpage}&cfgridpagesize={cfgridpagesize}&cfgridsortcol umn={cfgridsortcolumn}&cfgridsortdirection={cfgridsortdirection}">
<cfgridcolumn name="artistid">
</cfgrid>
</cfform>
<cfelse>
<cfquery datasource="cfartgallery" name="qRead">
select * from app.artists
</cfquery>
<cfoutput>#serializeJSON(queryConvertForGrid(qRead,
cfgridpage, cfgridpageSize))#</cfoutput>
</cfif>

My iMac screen suddenly turn black and white when I'm in fullscreen mode. What could be the cause of this problem?

Hi, once in a while the screen on my 5K imac turns black and white when I'm on youtube watching videos in fullscreen mode. It also exits the fullscreen mode automatically from one second to the next and a warning pops up saying how I can exit the fullscreen mode. Does anyone have an idea why this happens and if this is a software or hardware problem?

I'm using a Dell laptop with Windows 7. I've set the resolution to 1024x768, though the maximum resolution on this can go as high as 1366x768. So this is a problem that no one has been able to figure out? I've ran lots of other Flash-based applications that went fullscreen with no problem, so I'm wondering what other methods there are to try, if possible.

ICal sudden extreme lag and eating up all memory in week mode

Similar Messages

Maybe you are looking for