Ical sync assign default category

Does anyone else have trouble assigning the default category to new events created one the iPhone?
iTunes appears to only let me select one category despite showing all of them in the drop down menu.

Hi irfanh,
You can select only one calendar from the Pull down menu in iTunes for new events.
I created an iPhone Calendar and put all my new events in there from my iPhone, then at the end of the day I sync my iphone calendar and place the new events in the correct calendars....
Not great but that's the best I could come up with....
F

Similar Messages

I can't seem to sync my calendar on my iphone to iCal because the default email address associated with my calendar on my iphone was to an old work email address that I no longer have.

I can't seem to sync my calendar on my iphone to iCal because the default email address associated with my calendar on my iphone was to an old work email address that I no longer have. When I go to ICal it asks for the username and password which I no longer have. The calendar is still on my phone (even though the email account is on my phone but doesn't work) Is there a way to copy my calendar to a different email address on my iphone? I have now set the default email account for the calendar to a current email address but I still can't figure out how to merge my iphone calendars, copy the iphone calendar to iCal, or save my iphone calendar to my mac. Also, I read in ITunes to check "sync to ICal" but my ITunes under my iphone and info just says "Sync Calendars" which doesn't transfer it to iCal when I sync my phone.

iCloud: Troubleshooting iCloud Calendar
iCloud: Advanced Calendar and iCal troubleshooting

How can I assign Default no for a contact

How can I assign Default no for a contact

hi! Don't know what kind of OS you are using, but with the MAC, within Address Book on the computer, not the iPhone, you have to designate the category for the address entry as BUSINESS, then the building will show up after you sync your iPhone with the MAC.
Hope that helps,
AL

Oracle Inventory: How to change default category set of items

Hi,
We have a requirement where we need to change the default category set of functional area inventory in oracle as we are importing new items into inventory whihc need to be assigned to a new default category set.There is an existing default categpory set for this area.
As far as i understand once a default category has been set up and an item has been defined, the only way to change the default category set for a given functional area is to update all items with the new default category set before updating the default category set/functional area relationship.
How exactly do we update the defaul category set for an existing item and change it to a new one. Since we have close to 15K items what is the best way to do this.Is there ay API available?
Thanks in Advance
AM

Hi Helios,
Thanks a lot for your response
The fix given in this document is to allign all the exisitng items to a category set (purchasing in this case). This is exactly what my doubt is. How to assign 15k items to a different category set. If i am able to allign these items i can change the default category of the functional area.
Thnaks
AM
PS: i am using 11.5.10.2

Why does iCal sync via dotMac suddenly fail with Tiger

I've read about the Leopard and Tiger-to-Leopard syncing issues with iCal, but I have an issue that is just with Tiger (10.4.11). I have two machines running the same version of MacOS (one Intel, one PowerPC) in different countries, and a live dotMac subscription. I have a small collection of calendars which are set to auto-publish after each change. This system has worked fine for a long time, and it enables me to use the same calendar in both my main locations.
Last Saturday, 8th March, I shut down one of these machines (in France) and moved to the other one (in England). I then tried to sync the English machine, and it did do an update of my calendars, but it turned out (from the dotMac 'advanced' pane in System Preferences) that dotMac sees the last sync for the French machine as being on 13 February, whereas it was in use every day up to 8 March. Something must have turned off the auto-publish feature on my French machine - but what could that be? I see that the dotMac Sync engine (whatever that is) was last updated on 9 March - this is probably when I first tried to sync the English machine.
Can anyone suggest what went wrong? I have not consciously changed any parameters for iCal or dotMac for a long time.

Hi - I am the original poster on this topic. I have now moved my UK machine to France, and it's sitting in the same room as my other Mac. As before, I have a small set of calendars (only one is relevant) and I am running the same version of iCal on each machine sync'd via dotMac. Let's call the machines A and B,
A few hours ago, I added an event on machine A. I then used the Sync feature of dotMac (accessed via System Preferences) to make sure that this machine was sync'd with dotMac. The date and time of this was confirmed by the 'advanced' info in the System Prefs DotMac screen. I then used the "show Calendar on dotMac" feature for the relevant calendar, and I saw my new event available there.
I then went to machine B and went through the same Sync sequence, but my new event didn't show up. That was some hours ago and it still isn't present. If I do "show Calendar on dotMac" on machine B, I see machine B's version of the calendar, the one without the new event!
The URL for the B version of the calendar is
http://ical.mac.com/WebObjects/iCal.woa/wa/default?d=25&u=livfoss&v=0&y=2008&m=4 &n=Raissac.ics
and for A it's
http://ical.mac.com/WebObjects/iCal.woa/wa/default?u=livfoss&n=Raissac.ics
Clearly there are differences, but I have no idea what they mean.
What do I have to do to get the most up-to-date version of my calendar show up in iCal on machine B? I am completely stumped.

Wireless iCal Sync?

On the iPhone, does iCal sync over the network (via wireless) with DotMac (as is the case on a Mac) or is a physical connection required to sync with a Mac/PC?

Please allow me to add my voice to the cry of people requesting wireless sync. This makes the iPhone functionally inadequate as a credible work phone. I don't want to go back to using Crack(berry). It's my only real complaint about my iPhone.
At a minimum please do something to replace the USB cable with wireless between the computer and the device. I'm constantly forgetting to leave my cable connected to my charger (at home) in the morning, and I can't sync my calendar all day.
Since I'm a software product manager by background, please allow me to suggest a small, prioritized functional description, as a way to express my prioritized list of wants. Hopefully it helps provide some insight into customer use cases.
Please, please, please.........
*Wireless sync - local*
1) The iPhone will perform a "standard" sync (calendar, contacts, images, audio) with a laptop using a "local" wireless transport (substituting transparently for the existing USB transport.) (Note that this description does not address wide-area sync over a wireless carrier network.)
2) End-user functionality remains the same with regard to the sync.
3) The first time a user wishes to pair the iPhone with a computer, an authentication, configuration, and pairing step must be performed (from within iTunes) while the iPhone is physically connected (via USB) to the computer with which the user wishes to sync.
4) The iPhone will use a network-appropriate mechanism of continually monitoring whether it has come into network connectivity with a computer to which it is paired. When it does, it prompts the user whether the user wishes to sync immediately.
4a) If the user responds yes, a sync begins
4b) If the user does not respond before the end of a timeout period, a sync either begins (or not, depending on a preference setting; the timeout can also be set in a preference).
4c) If either the sync is completed, or the user declines a sync request, the iPhone will again execute this discovery/sync-request/sync cycle periodically. (The period can be set in preferences. Default: 10 minutes).
*Network support:*
1) 802.11: The first priority is support for an 802.11 network. Syncs will only be completed when:
1a) The computer and the iPhone have been pre-paired (via iTunes, above).
1b) The iPhone has detected the 802.11 network, and the user has elected to join it, and the iPhone has successfully joined it.
1bi) (This means that when the iPhone detects an 802.11 network, it connects, and performs a lookup for the named computer with which it is paired (e.g. via Bonjour)).
1c) Syncs must be performed using encrypted IP connections (e.g. HTTPS) between the iPhone and the computer.
2) Bluetooth: The second priority is support for Bluetooth. Syncs will only completed when the computer and the iPhone have been previously paired via iTunes & the iPhone / computer link over Bluetooth has been paired (in the Bluetooth sense of the word Paired.)

Trying to assign multiple category sets to an item

Trying to assign multiple category sets to an item-- i created a new category set and went to set it as the default set for Order Management. Receiving this error:
category set is defined with Multiple Category Assignment flag set to yes. Order Managment functional area can be assigned only category sets having Multiple Category Assignment flag set to No.
Is this a setting that I can change??

If the item is in transit, I'm not certain there is a way that you can do this. It will be delivered to the person at address that is on the postage label. If there is Signature Confirmation selected on the parcel, it might be held somewhere until you pick it up, though. Since you are registered to ebay in Australia, it might be best if you contact Australia Post with this question. We can only answer with our experience in dealing with Canada Post and the couriers here. And do be sure to update your addresses with both ebay and paypal to prevent this from happening in future. Best of luck to you as you carry forward. Sorry, that is assuming you are the receiver and not the seller.

ICal "all day" default

How can I change iCal FROM the "All Day" default so it always opens asking for a specific time to start the appointment?
I'm running OS 10.8.3 on my iMac and 6.1.2 on my iPhone5.

I have the same problem. All day events created in iCal sync to the Exchange server as Casablanca time zone, which I believe is the same as GMT. Events created in Entourage sync without error. Most events created on a PC with Outlook sync fine all the way through to iCal. This seemed to start about the same time as your post, ie sometime around November. Prior to some time in the fall, all day events sync'd properly. I've posted this topic to the mactopia entourage forum but I haven't gotten a response there yet.
I'm using iCal 3.0.6, Entourage 2004 11.4.0, Mac OS 10.5.6. Any thoughts anyone? Apple?

DTM for Mac iCal sync issue

Ok download went well. upgrade os went well. first sync went well....until.....I realized that my calendars were all now merged.
Background: in ical I have 4 calendars created: work, home, wife's, gmail. all color coded for ease of understanding.
DTM sees the calendars and their names prior to sync. They are actually still color coded at this time.
Issue: when the calendars sync all calendars "merge" in to one "gmail" calendar and that's all. When I look at the preferences on the BB it now has 6 calendars (none from ical named) one for each email address I have on the bb. ie. [email protected], [email protected], [email protected] and so on.
Why and how can this be corrected?
I can honestly say that google sync worked WAY better than this piece of crap released.

Desktop manager will only sync the default calendar. If they other events are not entered in to the default calendar they will not sync. They will stay on your device though.
If you want you can "move" them to the default. Then they will sync to ical.
To move them, open the event. hold the alt key down and type the word move. this will bring up a pop up that asks if you want to move the event to your default calendar. The name will pop up in the question.
Choose yes. Then hit the back arrow (the curved arrow) and hit the discard button.
The even is now moved to your default and will sync with your ical.

Default category of delivery date in schedule lines

Hi,
When i enter transaction ME38, select an item and click on delivery schedule to input schedule lines,
by default i can see 'M' in field category of delivery date.
'M' is displayed in all the records, whether a sch line exists or not.
In another system of mine, when i try to enter sch lines thru ME38, by default all records show blank in category of delivery date.
I want to change the default category of delivery date as 'D' or want to keep it blank , but not 'M'.
How can i change this???
Regards,
Sneha
Points will be awarded for helpful answers *

Hi w1n,
following is the setting in my system.
EN     C     5     Calendar format
EN     D     1     Day format
EN     K     2     Planning calender
EN     M     3     MONTH FORMAT
EN     P     4     Period format
EN     W     2     Week Format
Still it is showing me M as default in all the lines.
M                 06.2008                  32      R01.06.2008
M                 06.2008                  24      R01.06.2008
M                 06.2008                  24      R01.06.2008
M
M
M
Can u pls help me out ???
Regards,

HT2513 Ical sync with iPad limited to 2 years in the future

Ical sync from Mac to iPad only appears to work for events up to 2 years in the future. After two years from current date no events show up on iPad. Can you increase this to sync events three years into the future?

Hi,
Are you following these instructions (I have not done this):
http://help.yahoo.com/l/us/yahoo/calendar/yahoocalendar/sync/sync-03.html
Only the CalDAV calendar created with this process should sync.
Best wishes
John M

I tried to create a new google calendar in ical, but they did not show up, I tried this several times. Now when I sync my iPad via iTunes all these failed attempts are showing up under the ical sync list in iTunes, how can i clear them from this list?

I tried to create a new google calendar in ical, but they did not show up, I tried this several times.
Now when I sync my iPad via iTunes all these failed attempts are showing up under the ical sync list in iTunes, how can I clear them from this list?

See https://bugs.downthemall.net/ticket/2147
Google Search Bug
Reported by: openid:nathan wride Owned by:
Priority: major Milestone:
Component: Polish/Usability Version: 2.0.10
Keywords: Google search instant save bug Cc:
Operating System: Windows
Description
Hi Guys
I have found a bug/annoying thing that occurs frequently on google. When searching, DTA trys to download the search...
I'll try to attach a screenshot.
Attachments
[https://bugs.downthemall.net/attachment/ticket/2147/Screenshot.png Screenshot.png] Download (113.0 KB) - added by openid:nathan wride 4 weeks ago.
The screenshot that shows the bug.

Do Reminders in iCal sync via iTunes?

I'm using Reminders in iCal 5.0.1 on OS X Lion. I sync my iCal data with the Calendar app on my iPhone, via iTunes (not iCloud). The weird thing is, none of my Reminders data is syncing, either from my iPhone to my iMac, or from my iMac to my iPhone.
Does the Reminders data only sync via iCloud?

This doesn't help you, but I just recently started having the same problem, I just upgraded my 3G to 4.0 in iTunes so I don't know if that has anything to do with it but nothing on my phones calendar will sync to iCal. Events in iCal sync to the computer just fine thought. I hope someone can help me figure this out!

ICal sync prompts password which doesn't work

Dear support team,
Whenever my computer iCal syncs to my MobileMe, and thus to my iPhone, I get a prompt for a password that reads "Enter the password for your user account on 'End User's Computer'." When I type in my user account password it says "Sorry, you entered an invalid password. Please try again." I then type my keychain password and get the same message. I type my MobileMe password and get the same message, again. I have no other passwords to try. When I check iCal on my computer and phone, I see that the sync on iCal worked, regardless. Other than being annoying, the password prompt interupts FCP layoffs. So I set sync to manual, but forget to sync before I run to a location shoot with the incorrect unsynced info on my iPhone. I endeavor to find a solution.
One of the articles on this site instructed me to use Keychain First Aid in Keychain Access. To verify keychain issues, it prompts for my user login password, which works. It then says that there was an error, which I then repair. I test the hopeful result by syncing to iCalendar, but get the same interrupting password prompt. Another article instructs to unlock the "login" and "System" keychains, in Keychain Access, to do something there. I had unlocked and snooped around both, before consulting the sites, but now my user login password no longer works to unlock the "login" keychain, and neither do my other two passwords. Oddly, my user login password works just fine opening the "System" keychain My safari keychain locks and unlocks just fine with it's password. I go back to First Aid and see that my user password works just fine, and see that there are no errors in the keychain system, but I'm now afraid to shut down my computer fearing that I won't be able to login ever again. I'm thinking about following another discussion instruction to reboot the entire computer with the original Leopard OS disk, but that feels like a last resort headache. I could pack up the entire computer and bringing it to the nearest Apple Store Genius Bar, but that will take half a day.
I just followed a support instruction to reset the login keychain I was unable to open, restarted and tried the iCal sync with the same result as before. I can't think of anything else.
Any suggestions?
Thanks for taking the time to read this.

Just fixed it by going to MobileMe Sync Preferences and unchecking the box for keychain sync. No more password prompts that say "Invalid." Now the iCal on both computer and iPhone sync without interruption of work flow. I had originally checked the box to sync keychains so that I wouldn't have to type in ID's and passwords to enter sites on my iPhone. Big glitch in the system. Why have the box to check if it creates problems? Hopefully they'll fix it once, or if, they become aware.
Thanks for letting me think aloud.
Peace

When I sync my iPhone to my Mac computer the items that I have put in my phone iCal sync to the computer, but the items that I have entered on my computer iCal do not sync to my phone. How do I fix this?

When I sync my iPhone to my Mac computer the items that I have put in my phone iCal sync to the computer, but the items that I have entered on my computer iCal do not sync to my phone. How do I fix this?

look here
http://www.apple.com/support/ical/

Ical sync assign default category

Similar Messages

Maybe you are looking for