ICal TODAY button doesn't work

I have a recent problem I can't figure out...hoping someone on the discussion board can help. When I have Mail open along with iCal, the Today button on the calendar doesn't work. If Mail is closed, the button works fine. I re-installed Leopard thinking that might help but no such luck. Any thoughts?

I have a reliable work around that I found by accident.
- make sure iCal is stopped (command-Q)
- start iCal
- change to a different day
- Today button should be enabled
- close iCal (red x)
- click iCal from the dock
- Today button stays enabled from this point on

Similar Messages

IOS 5.1 Update, Home Button Doesn't Work.

Ever since I installed the iOS 5.1 update on my iPhone 4, the home button does not work at all! I've tried every trouble shooting solution I could find. I've Restarted, I can't hard reset because the home button doesn't work, I've restored from back up, I've restored as new, I've vacuumed out and gently used a tooth brush in the port below the home button in attempt to remove any dust. I've tried opening a factory installed app such as Maps, Safari, Stocks etc and held the top button until the "Slide to power off" showed and then held down the home button until it went to home screen except it didn't go to the home screen at all the "slide to power off" disappeared after a while. I have extremely intermittent response with the Home Button. If i press it continuously it will work after 27 presses one time or 9 presses another but never when I try to do a hard reset and 9.999 times out of 10 it doesn't work. I am so frustrated! I didn't get it wet and it stopped working immediately after the software update. HELP!

I talked to Apple today and was told that it's a "hardware issue" and they will not fix it. I will have to pay 169.00 to have it repaired because it is no longer covered. He told me that "the software update triggered a hardware problem" and that they haven't heard of this issue before either and this was after he went and "spoke with a senior service advisor". The thing is that if THEIR software update triggered the "hardware problem" meaning that if I hadn't updated at all my phone would be in perfect working order right now then HOW IS THAT NOT A SOFTWARE ISSUE?! I am beyond livid. I cannot continue using my phone with assistive touch, NOTHING else works and I know this isn't the first time they've heard of it because how can so many people be having this problem and Apple NOT be aware of it?! My family has bought three MacBooks, three MacBook Pros, one iPad, two iPad 2s, seven iPhone 3s, one iPhone 3GS, five iPhone 4s, two iPhone 4S, four Apple TVs, one Time Capsule and COUNTLESS versions of iPods and have never had an issue having any of them repaired and only four of those products had to be and it was a fast and hassle free...then again they all were covered still at the time of repair...
How do you restore to a previous firmware? I don't want a new phone...I want MY phone to work...the one that worked perfectly before their update....this is beyond ridiculous...I wish apple would take a look at their own support communities and see that this ISN'T our problem...it's a problem created by THEM.

Stuck on apple logo and Home button doesn't work, help please?

Well, I dropped my iPod Touch 4g by accident and since that day, the home button hasn't really been working that well. Its very hard to use since you have to press it in really hard to get it to work and sometimes it doesn't even work at all. Anways, I was skyping with my girl and I didn't notice that I had to charge the iPod and it died on me so I was like what ever its normal and started to charge it. When it turned on, it got stuck on the Apple logo and its been there for more than a day now? What can I do? I know about the Press Home + Sleep button together but the Home button doesn't work at all anymore. I tried everything really. I tried to connect it to itunes and see if I could restore it but it won't recognize it no matter where I connect it. Tried it on 3 different computers and none worked at all. I can't take it to an Apple store since there isn't any close to where I live and I really don't have anyone to take me there. So is there any other solution to fix my problem at home? or is it messed up completely? Someone please help me

I have this same issue. But also, it isn't just that the lock/home button stops working, all buttons stop working. Even if you switch it to silent sounds are still played. I just got my iphone Thursday. Went to school the next day and pulled it out, it happened while it was locked I guess because my screen was black and I couldn't do anything! Thought it died already! This was around 12. Finally I pulled it out of my pocket again at around 3 and it showed the Apple logo and acted like it had just started back up. Which is what always happens after I get stuck playing a game or something. Help please, has happened two or three times just today.

HT201263 iPhone not recognized by iTunes and my power button doesn't work

My iPhone just shut down after a call, battery was around 60%, its power button doesn't work and iTunes doesn't recognize it. I can't put it in DFU mode because that's by pressing home and power simultaneously but I don't have a power button. I can't restores via iTunes because it doesn't recognize it. What am I supposed to do?!!

Same thing happened to me today...when googling found people having same problem with iphone 4 and said to hold power and home buttons to reboot. It worked! I was in a panic but its like it never happened...everything is as it was before. Even showed a missed call...

The menu button doesn't work! Please help me!

I own a really cute ipod mini and i love it. But I had some trouble lately...the latest problem: my menu button doesn't work. well, i did everything i could do...reset all setting etc etc. but the problem still persists. Please help me!
Windows XP

I own a really cute ipod mini and i love it. But I
had some trouble lately...the latest problem: my menu
button doesn't work. well, i did everything i could
do...reset all setting etc etc. but the problem still
persists. Please help me!
Windows XP
same thing is happening to mine. i own a silver mini and recently it has been acting skrewy. the backlight goes on and off (without holding MENU and when the setting is at OFF) and the menu button doesnt work too. just today i discovered that when i do the HOLD switch it replaces the MENU process or ability.
PLEASE HELP!

My iPhone4 got wet. And now the home button doesn't work.

Today it was raining and my iPhone4,which was in my pocket, got wet. And now the home button doesn't work. What should i do to fix it?

I would place the iPhone in a big bowl of white rice, rather than in a baggie. That's what my brother did with his iPod touch that got wet, and it fixed it. The iPod touch works perfectly fine now, and the bowl is better because while the rice soaks up any wetness or condensation, the openness of the bowl gives way for evaporation.
A good idea would also be to take out your SIM card, if at all possible. Put it back in when you're ready.

A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. 1st gen iPad.

A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. The message is now fixed & I cannot get rid of it. Ironically, when I found this forum I was able to set up an apple Id. Please advise how to get rid of the pop-up box. Thanks!

I'm having this same problem as well and cannot advance--very irritating. All of the information is filled out correctly and I've editted my AppleID information online separately as well to get around this issue, but no luck...

Can't lower voice memo volume. My decrease button doesn't work anymore. Any other way i can lower it without disabling speaker

Own an iphone 5. Can't control voice memo volume from anywhere that deals with volume on my phone. My decrease button doesn't work. I have to listen to my voice memos on full blown volume. Can't lower it from settings or from music. Help please!

Hi,
thanks for your answer.
The Size of all disks is: 6 x 4 TB.
In the Pool are 5 x 4 TB plus 1 x Hot Spare.
It comes up to about 14,6 TB of Data formatable.
But tried it also with just 3 x 4 TB to see if it works.
I just made a Raid5EE on the controller and then used Storage Spaces with simple, all worked fine.
Here the results of my tests:
1) your command had to be modified (typoe in usemaximumsize, and had to add -ResiliencySettingName Parity.
new-virtualdisk -friendlyname testpsh -storagepoolfriendlyname test -ResiliencySettingName Parity -usemaximumsize
But anyway, my problem is not creating the virtual disk, but formatting the partition if it's parity only.
I added a screenshot:
Here you see my storage pool, and I added 3 virtual disk.
1 simple, 1 mirror, 1 parity. Only the parity cannot be formatted. The others can. No mather which size I do.
About a testserver, I added 4 x 4 TB to a VM (VHDX-files) and could do parity without problems. So it seems it is this server specific.
As it worked with another controller, I really wonder if the controller could break parity of Storage Pools?
The other weird part is, it sais "Raid" as BUS, but it's set to pass through, in details I see the serial of the attached HDD.
This is what properties shows on this volume. Always RAW.
I also tried Software Raid5 within the server.
This also worked fine. So really only parity.
Thanks
Patrick

My screen if frozen and I can't shut off my phone. I already have my assistiave touch button on my screen but it still own't let me shut off my phone. And my lock button doesn't work either

My screen is frozen on the camera and my phone won't let me shut it off. My lock button doesn't work and my assistance touch button won't let me shut it down either. My phone also takes hours to die and my battery if fully charged so i can't wait for it to die i need to get it back to normal asap! How do I get it to unfreeze?

A reset is when you press and hold both the home and sleep buttons for 10 seconds or so until the Apple logo appears. You won't lose any data. Give it a try.

Volume and Power button doesn't work..how do I fix?

My son's volume buttons or the power button doesn't work. Is there something I can do to fix these issues?

Try the following to rule out a software problem.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

"Submit to SAP" Button doesn't work

Hi to all,
I'm trying to develop an interactive form using NW04 SP22. My problem is that the submit to sap button doesn't work. I think I have not properly installed active component framework (ACF) on my client pc but I can't find the right ACF to install. I found a note 766191 in which I can download ACF for SP22 but the link [url]https://sapmats-de.sap-ag.de/download/download.cgi?id=OZOHD0204MQQADJPWOZSGFDNCP39PBJ6TFA2CANJKUPYIGJF16[url] seems not to work. Where can I find it?
Thank you very mich,
Enrico

Hi Enrico,
You can download it from the below link:
http://www.esnips.com/web/arafatfNewFolder/
Let me know once you are done so that I will delete the link.
Regards,
Arafat

Can't Add Credit Card (submit button doesn't work)

Hey. Recently come across a problem trying to add my credit card so I could buy a Twitter app that works with Twitters new authorization.
The submit button doesn't work. It is still there, but it is unclickable, it doesn't load up anything, or do anything. It doesn't change to being clickable at any time.
If it helps, I have the Palm Pre, I'm with O2 (UK).
Can anyone help?
Post relates to: Pre p100ueu (O2)

This sounds like a credit card related issue. Has anything about your credit card changed, like a new expiration data? You can go to App Catalog, tap the drop-down menu, select Preferences and Accounts, then choose the account name, enter your profile password, tap continue, When the Edit Credit Card screen appears, re-enter the credit card number and confirm that the remaining info is valid or enter any new information, then submit.

My iPod touch 4th gen white's home button doesn't work the first time I press it, but the second time.

My home button doesn't work the first time I press it, but the second time. This is very annoying. Why is it doing this?

- Try a reset. It cures many ills and nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
-If a hardware problem see:
fix for Home button

HT4527 I want to move all my iTunes from old PC to new PC but Home Sharing on both and it works. At Step 11, I clicked Home Sharing Import button doesn't work.

Help! I want to move all my iTunes music, podcasts, etc. from an old PC to a new PC. I set up Home Sharing on both and it works. I followed the steps in http://support.apple.com/kb/HT4527 to the letter. At Step 11, I clicked on Home Sharing on my new PC, then Edit > Select All so I could then import everything to the new computer. No matter what I try, the Import button doesn't work. There are two buttons on the lower right hand side of the iTunes screen - one for Settings and one for Import. The Settings button is clickable but the Import button isn't even live. In other words, I can see it but not click on it. I have double-checked my firewall and it is not the problem. How can I get the Import button to work?

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have failed to move contacts and calendar items across you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

My ipod touch 5th generation will not turn on and the home button doesn't work. what do i do?

Hello my name is Leslie and i would like to ask you guys a question on how to fix my ipod or what is wrong with it. My ipod touch 5th generation will not turn on and the home button doesn't work. what can i do to fix it ?

Has the home button worked in the past, or is this been something that hasn't worked for some time? The only way to reset the device is with the sleep/wake (power) and home buttons together. Without it, you would have to wait until the battery dies and then plug it in to try and reset it. The Home button is used for several user troubleshooting steps. Without it, you cannot perform a reset, put the device into recovery mode, or place it in DFU mode. You need to get the home button repaired.

ICal TODAY button doesn't work

Similar Messages

Maybe you are looking for