ICal, Touch, List view and Day view limitations

It seems a recent software update now imposes a limit of six items on my iPod Touch Calendar when using the Day view. I distinctly remember this not being the case very recently. In order to see more than six all-day listings I have to use List view, which I don't like as much. Can anybody verify this change and suggest a work-around? I've tried a reset but no luck. thanks...

pinkbeats wrote:
+1 to it's return.
Seems strange that it's been removed when, with the increased convergence of OS X and iOS, it's a view that available in the Calendar app in iOS.
Like others here, this was the most useful view for me and I'm disappointed it's not there, hope it comes back with the Yosemite .1 release.
Unfortunately it hasn't .

Similar Messages

  • Ical displays Wednesday every day in Week and day view

    Upgraded to SnowLeopard and added "calendar.app" from the app store, evr since ical displays "Wednesday" everyday in week and day views. Any ideas?

    Replying to myself as this may help others!
    The problem was in system preferences. It was set to custom!!

  • My Month view says July, but my Week and Day views say January

    There appears to be a glitch in my iCal. Thanks to these discussions, I finally got it to accept 24 hour clock input (though it still displays times as 12 clock until I go in to check), but I am flummoxed by the fact that only in the Month view do I see the correct month. In Week and Day views it is always January. How can I correct the Week and Day views? By the way, I can't believe I am the only one to write about this. I searched but couldn't find any similar questions.

    racjstevens,
    Welcome to Apple Discussions.
    Try changing your default paper size in System Preferences...>Print & Fax>Printing.
    Is there any reason that you are still using 10.4.1? The current system is 10.4.10.
    Also check this search for other suggestions.
    ;~)

  • IOS 7 Calendar on iPad I cannot go from month view to day view. When I tap on the day of the month nothing happens.

    I use to be able to look at my month in the month view and when I wanted to make an appointment for a specific day I just tapped that day and it would open up the day and I could add my appointment to the time slot I wanted. Now when I am in month view and I tap on the day I want to make an appointment it does nothing. If I hold my finger on the day it creates an All Day event which is not what I want to do and even if I add a start time to the event, I don't know what times I have available on that day because the Day view hasn't opened. This is extremely frustrating. On my iphone it works properly...I can go from month view to day view by tapping on the day I want to view. Why can't I do this on my iPad?? If I could go back to ios 6 I would, calendar is not impressive at all!!
    Please help with any suggestions or PLEASE APPLE.....FIX THIS!!!

    I just tested, and this unfortunately still seems to be a bug in the latest iOS 7.1 release of the Calendar on the iPad, which is too bad since the release notes suggest that this iOS update included both bug fixes and enhancements to the Calendar.
    To my knowledge the bug has never been an issue on the iPhone version of the Calendar which behaves exactly as you would expect it should.
    It seems inconcievable given the obvious broken-ness of the current behavior coupled with what I would expect is a massive number of people who use the Calendar on the iPad, but is it possible that this bug isn't on Apple's radar?
    I'm happy to submit a bug report; does anyone know offhand the process for how the public can report bugs?
    This has been persistent in the product for nearly six months; it's well overdue that this bug be squashed.

  • Calendar from month view to day view

    Hi,
    why isn't it possible (like on my iPhone) if I'm in the month view to tip on a specific day and see this day in the day view?
    I adressed this already at the Apple Feedback page but it seems to be thaat even in iOS 7.1 it has not made into the finals - or am I doing it just wrong?
    Cheers
    Joerg

    I share your frustration Joerg - when I switch from MONTH view to DAY view, I seem to end up on a random day rather than the day I'm trying to choose.
    My 'workaround' is to double-click on the chosen day to create a New Event, then click across to Day view, then hit erase o get rid of the unwanted new event.  Surely there must be a better way?
    Cheers
    David

  • COOIS: Material number in Component view and Operation view

    Hi,
    In COOIS report, Material number is required in Component view and Operation view.
    How can we do this.
    Regards,
    somiraghu

    Dear,
    Under List-Operations we dont have the material number in standard layout
    Alternatively you can check for list-Object Overview report,which will give a overall report which includes -header details,operation details,component details.you can change the layout as per your requirement
    Material number is there any standard transaction for that.
    need to create customised for that, see below table's
    AUFK, AFKO, AFPO, AFRU, AFVV, AFVC
    Regards,
    R.Brahmankar

  • What is the diffrence between SAP View and CAD View ?

    What is the diffrence between SAP View and CAD View ?
    What is the main purpose of SAP View
    and
    What is the main purpose of CAD View
    On SAP help i found
    SAP View is used for :The SAP view displays the SAP structure (document-based structure) for the active CAD object, or another document info record (header document), with a single-level or multilevel document structure in a tree structure. You can variably configure the fields using the layout editor.
    CAD View is used for :The CAD view displays the document-based structure of the currently active CAD object, such as the structure of an assembly. The CAD system determines the complete (multilevel) structure and copies it either completely or in stages to the SAP system, in accordance with the default explosion level.
    BUT I did not understand it well
    Can someone explain this with an example
    THanks
    Raj

    Hello Raj,
    SAP View  can be further described as the view that is based on what is existing already in the SAP system. This view is generally used by SAP purchasing, MM people etc
    CAD view is nothing but the replication of the model tree view in the SAP system. This is used by the design engineer and this view replicates only the parts that are actively displayed on the CAD tool window.
    hope this helps. Let me know if you have further questions else please close the message.
    regards
    N K

  • Difference Between G/L View and Entry View in New G/L Accounting

    Hi,
    Can anyone tell me the difference between the G/L View and Entry View in New G/L Accounting as we are upgrading from 4.7 to 6.0.

    Hi,
    Entry view is the view to show how you have done data entry while posting a transaction and general ledger View is the document splitting view, where system will show you the split posting which system creates on its own.
    Example given by Alex above is general ledger View, ie: how system would split the line items based on base item categories.
    Regards,
    SAPFICO

  • Differences Between Entry View and GL View - Doc. Splitting

    Hello Experts,
    I need some help about an issue occuring in our Client right now, differences in Entry view and GL View. Any help will be appreciated.
    - Debit or Credit Balance posting of an account does not match with the balance posted in GL View, generally the GL view posts an amount above of the Entry view, and then it cause the Debit/Credit balance does not match with the movement in Entry View. Example Below from Quality System:
    Debit Balance in January 2013: 319.794.641,38
    Movement from FAGLL03 - OK.
    Movement from FBL3N - Entry View Difference: 319.794.619,86 - 319.794,641,38 = 21,52 Debit
    Checking NEW-GL Movement, we found the posting difference:
    The Document Entry View: 5.465,22 Credit From Bank Account
    The GL View - SAP Credited 5.486,74 Bank Account PC 1411 and Cr Bank Account PC 1444.
    Total:  -5.486,74 + 21,52 = 5.465,22 OK on Balance, but not OK from movement considering the Entry view.
    - Questions:
    - I understood the calculations, it was calculated as mentioned in note 1072850_Field overflow or very large amounts due to doc splitting
    - Is this supposed to happen by SAP Doc.Splitting perspective?
    - I am facing this issue because we need to send to the government account balances and their movements, and according to laws we need to pay additional amount for addtional lines generated, so it was better to send the information based in Entry View, not in GL View.
    - FS10N Show warning message "New general Ledger Implemented, use FAGLB03", and when i execute the transaction the balance showed was the balance from FAGLB03.
    - SAP 605 APPL.
    Regards,
    Leandro.

    Hi ,
    Can you Please look at OSS note
    1655571 - Multiple values and multiple/additional line items appearing in the NewGL View when compared to Entry View
    Many Thanks

  • Add a simple switch to PDF Reader to change between MY-VIEW and ORIGINAL-VIEW

    I would like to open pdf file with my same default viewing preference *every single time* that I open a PDF file, regardless of what the original document creator set as the default view.  It would be nice to have a SIMPLE switch between MY-VIEW and ORIGINAL-VIEW.  It's very frustrating to have to keep switching my view preferences every time I open a new file with a different default.

    Thank you Bernd, but that is only part of the solution.  For example, I do set the Page Layout to 1-page-continuous.  MOST of the time it keeps this setting, but some documents either override that setting, or perhaps it reverts back to a default (maybe with version upgrades?).  The other part is that I always want the menu-bar and toolbar to show up.  Some documents hide these when they open.  I realize that I can hit [F8] and/or [F9] to toggle these, but there are additional settings.  I also want to always have the selection tools available, etc.  Bottom Line: I just want a collection of settings that I can call up with a single, simple shortcut or button, so I don't have to perform multiple steps just to get the tool back to my standard configuration whenever something changes it.

  • Differences between view and materialized view

    Hello,
    Please tell me the Differences between view and materialized view in oracle 9i.
    Thanks and regards
    Madhuri

    How can I create index in a view?
    Please read reply of Justin Sir.
    Regards
    Girish Sharma

  • How can the info block be assigned with the view and assign view to users.

    Dear Friends,
    Anyone could plz tell me how can the info block be assigned with the view and assign view to users.  Also how can the info block in sale summary be assigned with a view and how to assign this view for user.
    Regards,
    Ashima

    Hi,
    To define view and to make it default
    Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Define Reporting Views (Tcode:OVCD).
    To assign default user to the view.
    Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Assign Default View To User (Tcode:OVCC).
    To assign Elements of SAPScript "SD-SALES-SUMMARY" to information Blocks To A View use
    Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Assign Information Blocks To A View (Tcode:OVCB).

  • General ledger view and entry view

    Can any one help me in understanding the difference between GL(general ledger) view and entry view?

    Hi,
    While entry view shows the Customer/ Vendor and other revenue/ Expence GLs
    General ledger view shows the  Reconciallation GL and  revenue/ Expence GLs. We cannot find Customer and Vendor details here.
    Hope your question is answered.
    Regards,
    Sharan

  • Diff bt Help view and Maintanence view

    hi gem's
    i need the diff bt Help view and Maintanence view with example...............

    Hi
    The followings are different types of views:
    - Database View (SE11)
    Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
    In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
    - Help View ( SE54)
    Help views are used to output additional information when the online help system is called.
    When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
    Go thru this link plzz
    http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
    Difference between "Help View" and "Search Help"
    - Projection View
    Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
    A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
    - Maintenance View ( SE54 )
    Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
    Please have a look at below link. It will help you.
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
    for more detailed info look on:
    http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
    1.Go to se11
    2. select view radiobutton and give a name
    3. Create
    4. select type of view you want to create. Such as database view.
    5. give short description
    6. give a table name such as mara
    7. press the pushbutton relationship. here you will find all the tables which are allowed to create view with mara.
    8. select one or mane tables.
    8 copy
    9.save , check and activate.
    Regards
    Anji

  • How to create Maintaince View and Help View

    Hi,
    Can u pls tell me the step by step procedure for how to
    create Maintaince View and Help View.
    And what's the use of these view's.
    Regards,
    Kumar

    FOR MAINTANENCE VIEW
    Create a table or a view in transaction SE11.
    A function group in SE80 transaction
    1>go to se54 transaction.
    2>give the name of the table /view starting from z.
    3>select "Generated Objects" radio button.
    4>click on "create/change" push button.
    5>you get a pop asking you whether to create modules ,click on YES
    6>give "authorization group" as temp.
    7>give the function group name created by you.
    8>click on "find Scr numbers "push button on the application tool bar.
    9>in the pop up that you get select the 1st option and press enter
    10>click on the create push button (it is beside "Find Scr numbers" push button)
    11>selct local object and pres enter.
    12>go to SM30 transaction.
    13>give the table/view name
    14>click on "maitain" push button.

Maybe you are looking for