ICal working even when not running

I'm not sure if this related to Snow Leopard (which I recently installed) or not as I don't normally shut down iCal.
However, I shut down iCal and I'm still getting the iCal alerts. I have verified that it is not running.
How do I shut down iCal so as to not have my reminders pop up (while I do not have the application running) and why would it give me reminders when it's not running, anyway.

Take a look at the setting of "Turn off alarms only when iCal is not open" in iCal's Advanced preferences. If you don't want alarms when it is not running, select this option. Most people, I suspect, do want them - if you want to be reminded of something, you don't want to be not reminded 'cos you have forgotten to leave iCal running.
It is not a Snow Leopard change.
AK

Similar Messages

  • LabVIEW 7.1 reports an applicatio​n error 'instructi​on adresses memory at 0x00000000 - ... could not be written' when finishing LabVIEW, even when not running any private code

    Hi there,
    I have found similar Qs here, but this one is _somehow_ different.
    My quite large app (>600 VIs) uses some DLL calls to communicate with medical devices. It runs OK, AFAIK, even when started several times. BUT I get an error message each time I when finishing LabVIEW 7.1 (even when just having loaded the app!!!). The error message states that "The instruction at 0x778cca36 adresses memory at 0x00000000. The process 'written' could not be done on that memory. Click to close the app".
    Any clues?
    My system: Athlon64 3000+ with 1GB of RAM running W2k German with all availabel SPs, LabVIEW 7.1 English with all support files from the devellopr suite May05 edition. System was set up 2 days ago on a fresh PC. The old system showed the very same behavior.
    My opinion is, that simply loading an app and than removing it should not cause such an error??!!
    Greetings from Germany!
    Uwe
    Attachments:
    Application_Error_LabVIEW_when_finishing.jpg ‏20 KB

    I can't look at your code because I don't have LV 7.1, but I would recommend searching on the side of the DLL.
    Do you have the source for the DLL? Can you be sure that the DLL doesn't somehow have a memory addressing bug? The DLL will be loadsd as soon as the program is loaded AFAIK, so maybe when unloading the DLL an error occurs because something isn't initialised properly. I've never programmed a DLL, so I may be way wrong, but my instinct tells me that the problem will most likely be with the DLL.
    Hope this helps
    Shane.
    Using LV 6.1 and 8.2.1 on W2k (SP4) and WXP (SP2)

  • My laptop (win7 2ghz, 1gig) has 100% cpu usage with itunes installed (even when not running itunes) since the upgrade.  i had to uninstall.  tried installing but still the same problem.  my daughter wants the new ipad, but this is a serious problem.

    when itunes upgraded my laptop went to 100% cpu usage.  only solution was uninstall.  have tried itunes again as my daughter wants the new ipad.  still same problem tho so not keen to spend £400 on new pad without pc support.  anyone help?  (ps been using ipod touches 1 and 2, been great source of pleasure for my two girls, but cant sync them, so using the little shuffles for music, syncing to an old version of itunes on an old netbook - had the sense to switch off upgrades when the new version went wrong)

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q with a real time mode but it is not working but when i run it with uploading it into the PXI it save in to the file

    Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q and DAQ NI PXI-6229 with a real time mode but it is not working but when i run it without uploading it into the PXI it save in to the file please find attached my vi
    Attachments:
    PWMs.vi ‏130 KB

     other problem is that the channel DAQmx only works at real time mode not on stand alone vi using Labview 8.2 and Real time 8.2

  • My notification tone when set to 'Silent" is not working even when setup on lolipop

    my notification tone when set to 'Silent" is not working even when setup .
     My notification tone when set to  'Silent" is not working even when setup . It still keeps ringout . This is highly disappointing

    Hello, Yes I have tested this with Android Lollipop and found that when the tone is set to silent within the BBM settings I do not receive any audible notification. Testing summary: Access the More menu - Settings - Tone dropdown and set Tone to BBM
    - Send a test message and an audible notification occursAccess the More menu - Settings - Tone dropdown and set Tone to Silent
    - Sent a test message and no audible notification occurs To allow us to assist further please follow the steps below to create a support ticket and submit logs. Once submitted someone will contact you to troubleshoot the issue.
    1) Browse to www.BBM.com/support/blackberry
    2) Locate the Need more help section is the bottom right of the page
    3) Select Contact us for additional assistance
    4) Complete the web form, provide as much detail as possible such as PINS involved and timestamps
    5) Select Submit to create the support ticketOnce the ticket has been submitted you will receive an email with your ticket number. This ticket number can then be used to submit logs. To collect logs use the following KB:
    KB35080 - "How to submit logs from BBM for Android, iPhone, and Windows Phone" - www.blackberry.com/btsc/kb35080 Thanks,
    Daniel

  • Macbook air runs hot and makes noise like processor running hard when connected to display - even when not actively using air book

    macbook air runs hot and makes noise like processor running hard when connected to display - even when not actively using air book

    You could use the free tool iStat Pro to see what changes when you connect your MBA to the display. Without doing anything the CPU pane should show a high percentage for "Idle". If the idle value is too low, launch the Activity Monitor and sort by CPU usage. There is a pane showing the different temperatures of your computer. Watch them for a few minutes after connecting the display.

  • Screen goes dim when processor working - even when plugged to mains power.

    Screen goes dim when processor working - even when plugged to mains power.
    Whether I'm running 3D software or just surfing the net, the screen keeping fading/dimming and then recovering over a few seconds. No USB devices connected, mains power on - NOT IMPRESSED!
    Any ideas - a hardware problem? Back to Mac?

    If you go to System Preferences > Energy Saver, the is a checkbox under the "options" tab that says, "Automatically reduce the brightness of the display before display sleep." On my new MBP (10.5.1), this was "on" by default. Try unchecking it and see if it helps.

  • Constant Error; Adobe Flash Player 11.4 r402 has stopped working. But NOT running Trusteer Rapport.

    I am experiancing this unbelieveably annoying and constant Flash error;  Adobe Flash Player 11.4 r402 has stopped working.
    But NOT running Trusteer Rapport, I never have, and it's not even installed on my computer.  So what's causing this?

    There were a couple AntiVirus/AntiMalware products that keep coming up, but I haven't validated that in the lab and don't want to call anyone out publicly without reporting the issue to them first.

If you could tell me what antivirus/antimalware products and versions you have installed, that would be helpful.
    So, third party stuff aside, I'd like to know more about the crashes your seeing:
    1.) Please provide links to the Firefox crash reports.  If you have multiples, the first few would be great.
         In Firefox, type about:crashes in the address bar
         If the link starts with "bp...", it's already been submitted -- just right-click on it and copy the link, and paste it into the reply here.
         If not, click it to submit it, and copy the subsequent link.
    2.) In firefox, type about:support
         Just copy and paste the output into the reply.
    3.) In Firefox, type about:plugins
         Please copy and paste the output into the reply
    4.) Please provide the output of the DirectX Diagnostic Utility
         Click Start > type "dxdiag" [enter]
         Click Save All Information
         Copy the output of the file into the reply, or use Adobe SendNow/DropBox/PasteBin to share the file.
    5.) If you can provide an exact URL and step-by-step instructions on repeating the crash (if it's consistent), that would be really helpful.  My goal is to build out a configuration that matches yours as closely as possible, reproduce the problem and then debug it.
    If you're not comfortable sharing that diagnostic information publicly, send me a private message.  Just click my name and use the options on the right.
    Thanks!

  • Is the gps in the ipad working independently when not having telephone connection? Can I navigate with the ipad on sea?

    Is the gps in the ipad working independently when not having sim-contact for internet or telephone? Can I navigate with ipad on sea?

    Is there an App for the iPad that will show my GPS present position on a world map,
    even when I'm at sea?
    Thanks,
    Tomac

  • Some snaps show up as black screens when I try to view them as single pictures.Even when I run them in slideshows they show up as black screens.These are jpeg files.How can I avoid this happening?

    Some snaps show up as black screens when I try to view them as single pictures.Even when I run them in slideshows they show up as black screens.These are jpeg files.How can I avoid this happening?

    There are several possible causes for the Black Screen issue
    1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
    5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help:
    As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • When running lion 32bit my wireless works great, when I run lion in 64 bit the wireless works awful. Any ideas?

    When running lion 32bit my wireless works great, when I run lion in 64 bit the wireless works awful. Any ideas?

    I solved my own problem. Found spotlight in Lion 7 doesn't seem to like third party external drives and gets hung up and unmounts the drives. Had to go into the spotlight preferences and choose all my external drives to not be searched by spotlight.
      Temporary fix but would love to see apple address this issue in the next version of Lion.

  • Firefox crashes - even when not using the computer

    Firefox crashes - even when not using the computer
    Sometimes I can walk away from the computer and only have one tab open (e.g. Facebook) and when I come back to the computer a few hours later, Firefox has crashed for no reason.

    Unfortunately the linked crash report is empty (@ EMPTY: no crashing thread identified; corrupt dump) and doesn't include any data, so it is not possible to find the cause of the crash.
    Did you recently submitted other crash reports that were submitted and show a crashing thread?
    See:
    *http://kb.mozillazine.org/Firefox_crashes
    *https://support.mozilla.org/kb/Firefox+crashes
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Officejet 4630 printer makes high pitched whine even when not printing

     I just bought an Officejet 4630 printer for home use and noticed it makes an annoying high pitched whine whenever it's not sleeping, even when not printing.  Is not very loud, and would not be noticeable in an office environment due to ambient noise, but is obvious in a quiet home environment.  Is this normal for this model or is the unit defective?  Neither of my two previous inkjet printers made this noise.

    Hello,
    If your OfficeJet 4630 is within the standard warranty period, please contact HP technical support to speak to one of our agents who can troubleshoot and diagnose this issue.
    We look forward to your response,
    Best regards,
    Jeff Christopher
    Executive Customer Relations
    Hewlett-Packard Company
    Palo Alto, California
    I work for HP

  • I downloaded the new 7 update and now my iPad won't charge to 100% and loses power even when not in use ?

    i downloaded the new 7 update on my ipad. it now will not charge to 100% and loses power even when not in use. any solutions ??

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
    Then plug it in and let it fully charge.

  • FAIL: process disp+work.EXE Dispatcher not running

    Hi All,
    I've reinstalled OS and installed NW 7.01 ABAP Trial. The installation is fine (no error). At the time I "start application server" through "SAP NW 7.01 ABAP Trial Version => NSP => Start Application Server", it shows the error on command dos window as below:
    ===================================================
    ============== Starting System NSP ================
    ===================================================
    =============== Starting database instance ...
    The service name is invalid.
    More help is available by typing NET HELPMSG 2185.
    The MaxDB Database Starter, Version 7.7.04.23
    Copyright 2000-2008 by SAP AG
    OK
    ============== Starting ABAP instance ...
    The requested service has already been started.
    More help is available by typing NET HELPMSG 2182.
    12.10.2008 12:25:40
    Start
    OK
    12.10.2008 12:25:50
    StartWait
    FAIL: process disp+work.EXE Dispatcher not running
    ============== Start operation timed out !
    Press any key to continue . . .
    Please help me out,
    Peerasit

    Clean uninstall and delete 'sapdb; and 'SAP' folders. Then reinstall again.

Maybe you are looking for