Icc profile corrupted in lion

I have all of the sudden a color shift in lion 10.7.4- the color profile from adobe are currupted.
This is the result displaying from Color Utility
Searching for profiles...
Checking 66 profiles...
/Library/Application Support/Adobe/Color/Profiles/RedBlueYelllow.icc
   Tag 'pseq': Required tag is not present. Could not be fixed.
/Library/Application Support/Adobe/Color/Profiles/Smokey.icc
   Tag 'pseq': Required tag is not present. Could not be fixed.
/Library/Application Support/Adobe/Color/Profiles/TealMagentaGold.icc
   Tag 'pseq': Required tag is not present. Could not be fixed.
/Library/Application Support/Adobe/Color/Profiles/TotalInkPreview.icc
   Tag 'pseq': Required tag is not present. Could not be fixed.
Repair done - 0 out of 4 profiles fixed.
images with this icc profile do not show properly in any application - safari, preview . In adobe bridge shows properly for a few seconds then it changes.
I check each .icc file and yes there is no pseq tag
I have change persions for everyone to Read& Write and run the disk utility and have no luck
Any ideas

I  have the same problem .
did you fix it ?that pink color wont go away .
here some more photos showing my problem

Similar Messages

  • Icc profiles fine arts paper grayed out in Lion

    Running Lion, In the print dialogue box, I can't access the icc profiles for Epson fine arts paper, even though I have the matte black cartridge installed.  In the Media Type box, the Fine Arts selection includes all three fine arts papers for my Epson 2880 printer, but all three are grayed out.  However, it works fine for matte papers.  My icc profiles (including the three for Epson fine arts papers) are installed in ~/Library/Colorsync/Profiles, also in HD/Library/Colorsync/Profiles.  Any suggestions?

    Same problem with greyed out profiles for Fine Art Papers
    The ICC Profiles for the Epson fine art papers that I downloaded from their site are coming up with errors in the ColorSync Profile First Aid. I redownloaded the profiles, but they’re still showing up as bad profiles and they can’t be fixed.
    Sample error:
    Header padding is not null.
    Tag 'DEVD': Tag reserved field is not zero.
    Tag 'DEVS': Tag reserved field is not zero.
    The file is locked. Could not be fixed.
    So what do I do now?

  • How do I install custom printer profiles in Mac os mountain lion. I can.t fine the icc profiles directory (if that's what it is).

    How do I install custom printer profiles in Mac os mountain lion. I can't find the icc profiles directory (if that's what it is).

    NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder. You'll need to do it again after each system update that's applied.
    OT

  • Epson ICC profiles will not install in Mountain Lion

    I have an Epson R1900 printer which requiress icc profiles. The generally agreed route has been to use those from Epson of America and these work fine on my PC. On the Mac however only the matte set will install. The glossy profiles bring up an error stating that I do not have enough permissions to complete the install. I believe this was also a known issue in Lion and I have found one suggested solution which was to adjust permissions in Colorsync and Profile folders in the Library.
    However, in Mountain Lion this did not work for me. Does anyone else have success in installing these profiles?
    Previous discussion here https://discussions.apple.com/thread/3319527?start=0&tstart=0

    I just used the Pacifist tool to peer into the Oct 4, Epson Printer Drivers v2.12 for OS X package. In particular, for the R1900, both sets of the ICC profiles are installed into the following paths. Supporting code for this printer is installed under the InkjetPrinter2 hierarchy.
    /Library/Printers/EPSON/InkjetPrinter2/ICCProfiles/SPR1900_A.profiles/Contents/R esources
    /Library/Printers/EPSON/InkjetPrinter2/ICCProfiles/SPR1900_W.profiles/Contents/R esources
    The AutoSetupTool is installed in:
    /Library/Printers/EPSON/InkjetPrinter2/AutoSetupTool/EPIJAutoSetupTool2.app
    Everything in the above paths is owned by root with group admin. The individual R1900 .icc files are read/write by root, read-only by everyone else. There are two categories of .icc files for the R1900 as shown below:
    Stylus Pro R1900 A Profiles
    Stylus Pro R1900 W Profiles

  • Possible solution for problems printing with ICC profiles - esp. R2400

    (N.B. This is long because I've decided to go in to details about the background of the problem etc.. Also note that whilst my experience is with the Epson R2400, anyone with problems printing using ICC profiles in Aperture may find this post helpful, as will be explained further down the post.)
    Ok, here's the situation. I've been an Aperture user for over a year, and an R2400 owner for half a year. In that time I have done a huge amount of experimenting, but I've never managed to get Aperture to work perfectly with Epson's 'premium' R2400 ICC profiles - the ones you can download from their site which are better than the ones provided 'in the box'. This hasn't been too big a deal because, in fact, the R2400 does a rather good job just set to 'System Managed' in Aperture and 'Epson Vivid' with a gamma of 1.8 in the printer driver. Nevertheless, it really annoyed me that something that should work wasn't, which is why I've spent a lot of time trying to figure out what's going on. Having said that, I have come across a method which will give you pretty good prints out of your Epson R2400 using the premium profiles in Aperture - it's not perfect, but it's the best you're going to get if you want to use those profiles in Aperture. I understand the words 'it's not perfect' aren't what photography experts would probably want to hear, however, I have seen a few anguished posts from R2400 owners in here before, so I think some people may find it useful.
    The whole reason why Aperture is hopeless at using the R2400's premium profiles is because - unusually - their default rendering intent is set to 'relative colorimetric' rather than 'perceptual'. You might say 'but that's good - it means you get more accurate colours!', and if you do, you're right... however, there's a snag. To get an image to reproduce well using Epson's premium profiles and relative colorimetric rendering, you really need to use black point compensation. This is where the trouble lies: Aperture's black point compensation is diabolical to the point of being unusable when used with relative colorimetric rendering - I feel I need to be awarded compensation every time I've ever tempted to use the setting. So because BPC in Aperture is unusable, that effectively makes the premium profiles unusable too, because Aperture always uses the default rendering intent specified in the profile.
    The solution? Use perceptual rendering instead. Ok, so you can't change the rendering intent in Aperture, which makes that sound a tad difficult. However, as I said in the above paragraph, Aperture always obeys the default rendering intent specified in the profile... so you can see where we're going with this: we need to change the ICC profiles' default rendering intent from 'relative colorimetric' to 'perceptual'. I did some digging around and found one or two expensive pieces of software that could do that... but then I found that, lo and behold, the Mac OS has a command-line utility which can do the job for us, for precisely £0.00. It's called SIPS or 'Scriptable Image Processing System', and you can find out some information about it here: http://developer.apple.com/technotes/tn/tn2035.html#TNTAG58 For those who don't like reading technical jargon however, here's what you need to do to convert a profile's rendering intent. First go to terminal, then type in the following command:
    sips -s renderingIntent perceptual
    Do not press 'enter' yet. Instead, add a space after 'perceptual', find the ICC profile you want to modify, and click and drag it into the terminal window. You should then find that your command looks something like this:
    sips -s renderingIntent perceptual /Users/yourname/folder/RandomProfile.ICC
    At which point you can then press 'enter', and the command will execute, giving you an ICC profile which will now make Aperture use perceptual rendering.
    There is just one further thing to be aware of after doing this: for some crazy reason, you then need to turn on BPC in Aperture for the prints to come out as good as possible. Black point compensation shouldn't make any difference when using perceptual rendering as the idea of perceptual is that it takes account of things like that anyway, however, in Aperture BPC does make a difference, so remember to turn it on to get a half decent print. In general, I find that prints made using this setup come out pretty well; they almost perfectly match prints made using the profiles with a perceptual intent in Photoshop Elements, except for the fact that Aperture blocks up the shadows a bit more than Photoshop. However, if you can live with that, you might find this is quite a workable solution.
    Now, I said near the beginning of this post that all the above can apply to other printers too. Most printer profiles have 'perceptual' set as their default rendering intent, in which case everything I've just said won't be of much help. However, If you are reading this because you're having problems with ICC profiles in Aperture, but you don't use an Epson R2400, find your problematic ICC profile, double-click on it, and take a look at the window that opens: specifically, at the 'Rendering Intent' the window mentions. If it doesn't say 'Perceptual' then it may well be worth trying the steps I've outlined in this post to set it to perceptual, to see if doing so produces an improvement when using the profile in Aperture.
    Finally, just one note of caution: if you decide to try out the steps I've detailed above on a paid-for custom-made profile, please back your profile up before messing with it. I haven't experienced any problems when using SIPS to change a profile's rendering intent, but I obviously can't guarantee that it won't do something weird and corrupt your expensive custom-made profile.
    If you have any questions, feel free to ask, although (contrary to any impression I may give) I am not a colour-management expert; I'm just someone who doesn't give up when they have a problem that should be solvable.
    Thomas
    Mac Pro 2.0GHz with 30" ACD; 15" MacBook Pro 2.0GHz   Mac OS X (10.4.10)  

    Thomas
    Wow - thanks for such a comprehensive post.
    I have Aperture and a 2400 so this information is exceptionally useful to me.
    Again - thanks for caring and sharing
    Brian

  • CMYK ICC profile support in Lightroom: Workaround?

    Ok, I know this is not the first time someone has brought this up and I know that Lightroom doesn't internally support CMYK printer profiles, and I'm not expecting it to do that given that the documentation specifically says it doesn't work, and it in fact doesn't work.
    I'm using OS X (Lion). I recently profiled a Lexmark C543dn color laser printer with a ColorMunki Photo and the profile works great with Photoshop's "built in" RIP/CMS/whatever, but I can't get ColorSync in the printer settings dialog to recognize the profile. If I use the ColorSync Utility to force the profile on the printer, it also doesn't work.
    What I would have expected for colorspace conversions when printing (from lightroom for example) is something like:
    Melissa RGB -> ProPhoto RGB (or sRGB, Adobe RGB, whatever, using internal lightroom stuff)
    ProPhoto RGB -> LAB (using a generic ProPhoto RGB profile that comes with the system or the software pkg)
    LAB -> printer native CMYK (using the custom printer profile I created)
    native CMYK data -> printer
    So I don't understand why Lightroom or whatever application doesn't "tell" the printer driver that it's getting data in ProPhoto RGB (or whatever) at which point the driver should convert to LAB (or whatever PCS is specified) and then to printer native CMYK with the custom profile.
    Does anyone know of a way to make this happen?

    I'm not a professional, only a hobbyist, so it took me a little longer, but I also have the impression that the new Preview ignores ICC profiles.
    I noticed it when moving images between my iBooks built-in and my external Eizo screen. Since the gamut of the second is much larger, images appear rather different on the two screens. In Tiger's Preview, this resulted in colors changing suddenly during the move, when the center of the image passed from one screen to the other. This effect is gone and yes, the images are over-saturated on the 'good' screen.
    Jethro555, could you find a solution to the problem?

  • LR 4.3 Print Module + Dry Creek icc Profile = jpeg that Apple SW won't open

    Greetings,
    I have used Dry Creek Photo's (http://www.drycreekphoto.com/) Costo printer profiles successfully for some time with PS and they seem to work fine for soft proofing in LR4... but when I select one of those profiles in LR's Print module for export to jpeg[1] the jpegs produced cannot be opened with Preview, Color Sync, Safari, seemingly any Apple software in OS X (I've tried with both Snow Leopard and Lion).  The jpegs do open in PS and browsers like Chrome and Firefox.  If I open the files in PS and then save them with "Save As" the saved files open correctly in Preview, etc.  Also, other icc profiles (like Adobe or sRGB) seem to work fine.  I do not know if the printers at Costco can read the problematic jpegs or not.
    Can anyone expain what's happening here?  Am I doing something wrong?  Is this a LR or Apple bug?  Will the jpegs printed from LR's print module be usable on Costco's printers?  Will I have to "launder" everything through PS (which would I would obvioiusly rather not do)?
    Thanks!
    [1] Files printed at Costco need to be in the color space of the printer for Soft Proofing to work since unless it's changed recently Costco's printers ignore embedded profiles.  See, http://www.drycreekphoto.com/icc/using_printer_profiles.htm

    This file (it's just a screenshot of this browser window "Printed" from LR4) is an example of one that will produce the problem described in my OP: https://dl.dropbox.com/u/36072/Misc.%20Forums/test1.jpg
    It was produced with Lightroom 4.3 on OS X 10.6.8.  It is using this (http://www.drycreekphoto.com/icc/Profiles/IccFiles/Florida/Costco-FL-Lantana-Gls.icc) icc profile (picked at random to maintain my anonyminity). Trying to open that image with any Apple application on either OS X 10.6 or 10.7 fails for me.  I can successfully open the file in PS, Chrome and Firefox in both 10.6 and 10.7 without issues.  On OS X 10.7 I get the following dialog when trying to open it with Preview:
    Doing "Get Info" on the file results yields this:

  • No preview in FCP X when using custom icc profiles

    Hello,
    since I switched to Lion 10.7.4 from Snow Leopard I have no preview when I want to playback videos from the event browser. I calibrated my Eizo Display with the latest ColorNavigator6 software using a Spyder4 device. The generated Eizo icc profiles are version 2.2. My second display is calibrated with the Spyder Pro4 Software. This icc profile is v2.4.
    What I found out so far:
    - I open System Preferences > Displays > click on "Color" tab and check "Show profiles for this display only". When I change to a profile that is listed everything works fine. But my custom icc profiles both are not available now.
    - when I uncheck "Show profiles for this display only" my custom icc profiles get listed. When I select one of them Final Cut Pro X (10.0.5) doesn´t preview anything and hangs.
    - I compared my custom profiles with one that is listed "for this display only" using ColorSync. The only difference that I found were some missing and different tags in the custom profiles.
    Do I have to modify my profiles to work with calibrated Displays in FCP X? How / what do I modify?
    Regards, Thomas

    So how does color managment work in FCP X when I can´t calibrate my monitor or use icc profiles from a calibration software?

  • ICC Profiles for Win64

    I am running PS 6 for win64. Today I suddenly starting getting an error message saying that my ICC profiles are invalid. When I try to write a raw file to .tif after it has been converted to black/white, I get a corrupted .tif file.
    So I have been trying to reinstall these profile files using the ones for PS4 as provided on your web site. But they won't install properly, and the problem persists.
    What should I do?
    Mike Stratil

    Hi Yammer,
    You are right, I should have said that I was working in CR.
    I am using CR 7.3.
    I have just tried changing to sRGB and saving to .TIFF with the button at lower left side.
    SUCCESS! The file is now shown as I intended in grayscale.
    Apparently at some point I inadvertently changed the color space.
    Your help has been extremely valuable. Thanks a lot.
    Mike

  • ICC profile problem?

    Having a bit of an issue with .png files. It happens randomly, but recently I've been seeing it a lot lately. Most .png files I see while browsing the web of with the preview program itself will show random colored lines with a shadowed out image (the original image) in the background... It's not too important, but something I'd like fixed I guess....
    - http://s28.photobucket.com/albums/c234/BkacTiger/?action=view&current=PreviewIss ue.png
    If I open the file in preview or any web browser, sometimes (if unlucky) it'll show like this:
    - http://s28.photobucket.com/albums/c234/BkacTiger/?action=view&current=AdobeEleme ntsIssue.png
    However, if I open the .png file in some programs like Photoshop CS4 or Elements it will give me the following error message but will manage to show the image:
    Any ideas on why this is occurring? I've googled around about ICC issues and saw that I had to check ColorSync...I ran the repair and verify options with it not finding any issues. However, I saw another to try adding color profiles to my Library/ColorSync/Profile folders; when doing so, I saw that there were no profiles in there at the time.... Thanks for the time and help.
    Note: I wasn't too sure on what to include on this post, so if you need any other info please let me know... thanks again...

    Hi guys, thanks for the response.  Sadly, I can't go to edit - assign profile because it doesn't let me?  It just saids that the "ICC profile is invalid", I click OK and that's that.
    This is the only image, it's fine with any others.  I have just started using 2 monitors and I wonder if the 2nd monitor has corrupted the profile but it should still let me save it?

  • Icc Profile not working

    Hi,
    This is on a 2011 macbook pro with mountain lion.  I have tried to use two new icc profiles, put them in:
    library-colorsync-profiles-recommended
    and while they work in preview, and illustrator, they will not work in photoshop.  I go through the print dialog, with photoshop managing colors, select icc profile. Hit print, try to open pdf in preview, and it's all white (this only after blanks were printed out).  I have tried, tested, and no luck. 
    Please help, thanks!

    Ah-the driver is name is:  mcpd-mac-pro9000ii-10_68_1-ea11.dmg
    First thing I tried to do is delete and re-download new driver, but no luck.

  • Softproof: some icc profiles not available

    I downloaded icc profiles from a fine art print website and installed them.
    In LR4 only 2 show up. I can't find the other ones even after multiple installs. What am I doing wrong? Or are the profiles corrupt? I'm on W7 64.
    Here is the link to the icc profiles: http://www.theprintspace.de/uploads/Druckerprofile.zip

    I've downloaded them.  Some are CMYK (in the CMYK folder).  Some of the others don't conform to the ICC specification, according to ColorSync Utility, although it was able to repair them so they show up.  There are probably copyright issues with me giving you the repaired profiles, but if you email theprintspace, they may be able to do the same.

  • How to install ICC profiles in Lightroom

    This is probably an easy question, but I didn't see an obvious reply in Google.  I use ICC profiles when I print from Photoshop, but they don't appear in Lightroom.  Is there an easy way to install all my profiles into lightroom?

    Jim,
    Thanks!   I was scratching my head there for a moment, because that's how I install profiles in Photoshop. I couldn't figure out why they weren't showing up in Lightroom. It finally dawned on me that I had had to nuke and re-install Lightroom due to a persistent corrupt file. Apparently the profiles went away with the previous installation.  Thanks for your help!

  • Where are ICC profiles stored in Aperture? Formerly they were stored in the home map. I make my own ICC profiles, with  Color Munki. I can't find them back in  the /library/colorSync/Profiles. I'm using a Canon printer iPF5100

    ICC profiles
    Formerly ICC profiles where placed in the Home map: library/colorcync/profiles. But the home map does

    Kees, the color profiles are still stored in your user library in
    ~/ColorSync/Profiles/
    I can't find them back in  the /library/colorSync/Profiles.
    Are you looking in the System Library folder /Library/colorSync/Profiles  at the top level of your system drive?
    As you probably know, your User Library is hidden since Mac OS X Lion.
    You can reveal it from the Finder's "Go" menu in the main menu bar:
    Finder > Go
    Then hold down to options-key ⌥, until Library appears in the drop-down menu. Select it and open the Library.
    Regards
    Léonie

  • How to Install (copy) ICC Profiles

    I have two computers running fully updated versions of Mountain Lion. One has all the desired ICC profiles installed in Library>Printers>Epson>InkjetPrinter and in Photoshop the profiles show up just fine and I can make my selections.
    On my other computer, the profiles had been there but disappeared in one upgrade or another. I tried having them installed automatically by deleting and reinstalling the printer drivers via the Print & Scan System Preferences. The driver gets re-installed but no profiles. I tried copying the profiles from the one computer to the exact location on the second computer and still no luck. Profiles of two of my other printers are all present, but not the one I'm trying to get added.
    I have restarted many times along the way and even tried replacing the whole Epson folder with no change.
    Does anyone have an idea of how I can copy those profiles to where they'll work?
    FWIW, these profiles are for an older Epson 2200 which is still supported according to Apple's list. It works fine and does print perfect color through the computer that shows the profiles. Profiles for my Epson 7880 and Canon MX870 show on both computers.

    Here is the location where the Epson v2.12 Printer Drivers for OS X (Oct. 4) will install the Stylus Pro 2200 .icc profiles. Everything from Printers inward is owned by root and group admin. The individual .icc files are read/write for root, and read only for everyone else.
    I used CharlesSoft dot com Pacifist to discover this information. Downloaded the above Epson Driver dmg from Apple/support/downloads. Then opened it with Pacifist. Looked in Contents of EPSONPrinterDrivers.pkg. It is possible to drag the SP2200_A.profile and SP2200_W.profile bundles from Pacifist into the /Library directory hierarchy. You may have to create /InkjetPrinter2/ICCProfiles folders manually and permit them root:admin first.
    Not for the faint of heart. If I was invested in Epson printers as you are, I would simply install the whole v2.12 installation package above. That should build the directory hierarchy for you. (fingers crossed).
    /Library/Printers/Epson/InkjetPrinter2/ICCProfiles/SP2200_A.profiles
         Contents
              Resources
    /Library/Printers/Epson/InkjetPrinter2/ICCProfiles/SP2200_W.profiles
         Contents
              Resources

Maybe you are looking for