Icc Profile not working

Hi,
This is on a 2011 macbook pro with mountain lion.  I have tried to use two new icc profiles, put them in:
library-colorsync-profiles-recommended
and while they work in preview, and illustrator, they will not work in photoshop.  I go through the print dialog, with photoshop managing colors, select icc profile. Hit print, try to open pdf in preview, and it's all white (this only after blanks were printed out).  I have tried, tested, and no luck. 
Please help, thanks!

Ah-the driver is name is:  mcpd-mac-pro9000ii-10_68_1-ea11.dmg
First thing I tried to do is delete and re-download new driver, but no luck.

Similar Messages

  • Icc profiles not working in LR2.4

    I have inserted 3rd party icc profiles in users/steveroake/library/colorsync/profiles. The files have .icc filename extensions.
    When I go to the Print Settings button I can set the Color Matching to Color Sync and select the profile (it show up under the "Others"), and set the Printer Settings to "No color management" and all seems well.  However, when I print using the profile it is obviously wrong.
    When I then go into Printer Settings the Color Matching choice is grayed out with Epson Color Control selected. I cannot change this unless I restart LR and the same sequence happens.
    I ran the First Aid app in Color Sync and it did repair one file, but no change  -These third party profiles are shown in the users section in Color Sync.

    steveroake wrote:
    I was talking about the default media.
    See step 2 in the Lr 1.4 version of the tutorial I linked to previously http://www.computer-darkroom.com/lr_13_print/lightroom_print.htm

  • Photoshop Elements9 - ICC profile not installed"

    When I try to print a picture I get the error message "ICC Profile not installed"and the printer shoots out a blank page. . I have confirmed that when the image is saved the ICC profile box is checked. I have tried changing the ICC profile via "image/colour management". I am using Dell desktop running Win 7 with 4GB RAM and a Konica Minolta Magicolor 2500W laser printer but have the same problem with my Lexmark X5460 inkjet. Can anyone assist me to solve this problem please

    Thanks for the reply
    The printer works well with my Serif Photoplus software and with other programs such as MS Word/Excel etc and has done for a couple of years
    It is only since I downloaded the Photoshop Elements 9 trial that problems have started
    I have checked out the web site you suggested but they only have ICC profiles for Epson and Canon inkjets.
    I have checked the Konica-Minolta website but they do not seem to be of much help
    I may have to reinstall the printer software or uninstall the Photoshop Elements.
    Frankly I am not all that impressed with the black on black interface which gives me a headache and I find the Organiser difficult to work with anyway.
    I will try again tomorrow and see if I can solve the problem. If not then I may well upgrade to Serif Photoplus X4 instead.
    Regards
    Martin

  • Icc profiles not recognized when using photoshop with 10.6.5

    Ever since I upgraded to 10.6.5, Photoshop does not recognize the ICC profiles for different papers. The previous version of OS worked fine. How can I get 10.6.5 to recognize these profiles?

    Hi not done this before so hope it works, and I am updating from OSX 10.9.4   

  • ICC Profiles Not Available in InDesign CS4

    Hello all-
    I have a lot of ICC profiles installed on my system (OS X 10.6.2); some are in /Library/ColorSync/Profiles/ and some are in ~/Library/ColorSync/Profiles/.
    They are not available in InDesign CS4, even though every other app (including Photoshop, Illustrator and Acrobat) see them just fine.
    Is this a know issue/bug with CS4 and Snow Leopard? I don't recall having this issue on my old machine.

    A followup to this issue:
    This morning I couldn't launch Illustrator CS4, it kept crashing at launch. Scanning through the OS X crashlog I noticed 511 "Iterative Profile" errors:
    ###  com.apple.ColorSync               0x91e1981d iterateProfilesInDirectory + 1020
    I went into my /Library/ColorSync/Profiles folder and noticed there was now an alias pointing into Library/Application Support/Adobe/Color/Profiles/, which already contained an alias back to /Library/ColorSync/Profiles to get around the InDesign issue (as described above, which was working fine to this point). This created an infinite loop...
    I did not create this new alias... any idea where it might have come from?
    (Adobe needs to fix InDesign so it looks in the correct locations for profiles... the user shouldn't have to resort to manipulating aliases to enable profiles that are otherwise in the correct locations, and why do Adobe apps need their own profiles folder anyway????? As with their private Fonts folder, it does nothing but over-complicate matters...)

  • How to edit in ACR when ICC profile not recognised?

    Hi everyone,
    I am getting some of my photographic images made into a book by a large and reputable printer in HK.  They have just sent me their ICC profile and I've figured out how to do soft proofing in photoshop using the profile.
    However, I do 99% of my images adjustments in camera raw, then only open the image in photoshop if I need to do something else camera raw can't do (rarely).
    Is it correct that I won't be able to see how my photo will look when printed until I open the image in photoshop, after I've already done of my adjustments in camera raw, and meaning that I might have to do another round of changes in photoshop??
    Is there any way for camera raw to load the ICC profile so I can see what it's going to look like while I'm making the adjustments in camera raw, not after they're already done??
    HELP!
    Thanks,
    Poppy

    As I asked in the Photoshop Windows forum, what profile(s) have they sent you, along with what instruction?  A printer profile?  A document profile?  Both?
    It may be that you'll want to work on your images in one of the standard document profiles (ProPhoto RGB, Adobe RGB, sRGB) then when you're ready to deliver images to the publisher you'll want to do a Convert to Profile operation.
    But that's getting ahead of things.  You really haven't given quite enough information just yet.
    -Noel

  • CS3 to CS4 P S upgrade printer/paper icc files not working - Help!

    Have upgraded PS to CS4 AND upgraded Mac from PPC to Intel (10.5.6) on new MacPro. and using Epson 2400 printer. I rescued 3 important icc profiles and managed to load them onto new machine. When I go to print image the paper icc profile is visible and in the printer Menu my 3 presets are also visible. I allow PS to manage colors and disable color management. However the printed image is rubbish and it seems that the icc profile & preset have been ignored. I was able to print 1 image on my old PPC for it finally gave up on me - it was perfect.
    I have got to produce approx 50 images by April 6th for my degree course - desperation is setting in!
    Any advice out there as to where I should be looking for problem area.
    many thanks

    Profiles have nothing to do with PPC or Intel.
    For those that don't want to search. Here are 2.
    Ramón G Castañeda, "Printing too dark in CS4" #1, 4 Dec 2008 2:32 pm
    http://luminous-landscape.com/forum/index.php?showtopic=32919&hl=
    And I am sure there is more.
    The bottom line is that your printer driver needs to be properly updated for Leopard. And properly installed. Try reinstalling it.
    Set it as the default printer. Check CUPS interface to make sure. http://127.0.0.1:631/printers
    Must be registered in the ColorSync Utility. If not it is not properly installed.
    If all this fails you can use the ColorSync Utility workaround. But it needs to be registered in the CU. None Leopard compliant driver should register in the CU when installed.
    I have a Canon iPF9000 with a combination driver install that works properly in Leopard and a Epson 9600 that does not work properly in Leopard (I doubt there will ever be Leopard compatible drivers) but will print fine using the ColorSync Utility workaround.

  • PSE 11 - MacOX 10.7.5  Printing Wide Format Printer and Profiles Not Working Correctly

    Macosx 10.7.5
    When I start up PSE11  and go to print I set up the paper size then select a Printer Profile.  When print the image it is a mess and seem to be black and white it is as if I printed on the wrong side of the paper.
    I then go and try to print it again.   Now it all works as it should beutiful colours and spot on.  all other print following this works.
    Then I shut down PSE11.   Start it up again.  Guess what  first print is a mess again.   all others after are fine.
    I uninstalled PSE11, deleted prefs.  and reinstalled PSE11.    Same thing..   first print a mess all others ok.
    the issue can be replicated consistantly......
    no problems with PSE10 or PSE9
    any suggestions?????
    cheers elo

    Thank You for your suggestions.
    I have been printing using PSE for over  14 years going back before the term PSE came up.  I have done this professionally using profiles from others and those I generate myself..
    All the things you  mentioned have been done.
    The main  point missing in your suggestions is   It is only the first print every time I open up PSE11 that does not work...
    at completion of print I immediately go back to the file command and say print and then bypass all settings and print again.   this time and every other print aafter are perfect...      I did not change one single setting...
    I know about printer and adobe settings etc.     but thanks for going through the list it was a good reminder of how to remember everything sometimes we rush and forget something...
    Finally    It works PSE6, PSE9, PSE10, CS5, Lightroom 4.   I think I have the settings right......
    Any suggestions for how to get PSE11 to force the settings for the first print would be appreciated..
    Only thing I have not done is upgrade to the latest version of the epson driver.  Released less than a month ago to provide support for mountain lion.(iam only on lion)  Maybe just maybe???   you never know.   Will try this when I finish by next batch of prints.
    I will back up as I do weekly...    Still have the old driver from way back in release 10.5.8   will try to fire up to 10.5.8 and see what happens....
    cheers elo
    Message was edited by: Elo Laugesen

  • Icc profile not showing up in Photoshop

    hi- I downloaded an ICC profile from an online printer that I want to use in Photoshop CS3 so my images appear properly for their output. I placed it in Library/Adobe /Color/Profiles and restarted Photoshop but it does not show. What am I doing wrong?

    Ramon look, if it says the downloaded ICC profile is shortrunposters.icc and you place it in the folder listed as such and it appears like that when you look at it in the folder and then when you go to the actual profile list (which happens to be over 100 profiles) and you don't see shortrunposters.icc where the heck are you supposed to look and what are you supposed to look for?
    It turns out it is Xentilcle version3.icc now how would I or anyone else know that? The creator of the profile originally said "you need to go to an Adobe site to find out the problem because it isn't us", well excuse me I think it was their lack of identification of how the profile shows up.

  • Oracle 10g RAC SQL profiles not working for both the nodes

    We have identified a long running sql.
    Used Advisor to tune the sql
    Applied the suggested sql_profile as per the recommendation.
    when we re-run the sql from application, due to RAC setup the sql hit the other node, used the sql profile as indicated by v$sql but was long running.
    it generated a new sql_id due to which we think it was not working.
    Could you please advice how to apply sql_profile for both nodes?

    HI Arun
    Would you please post that in the GRID RAC section of this forum please ?
    Please consult the following documents to get support on your question:
    http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/votocr.htm#sthref211
    http://download.oracle.com/docs/cd/B19306_01/install.102/b14205/undrstnd.htm#RISOL2610
    Thanks

  • IOS Device-Sensor and ISE profiling not working

    Hello,
    I configured IOS device-sensor on one 2960CG-8-TCL switch. IOS is 15.2(2)E.
    Switchconfig:
    device-sensor filter-list dhcp list dhcp-list
     option name host-name
    device-sensor filter-spec dhcp include list dhcp-list
    device-sensor accounting
    device-sensor notify all-changes
    Switch does DHCP-Snooping and "show device-sensor cache all" shows the DHCP name:
    Device: b2b5.2fff.sa43 on port GigabitEthernet0/1
    Proto Type:Name                       Len Value
    DHCP    12:host-name                   17 0C 0F 11 31 22 41 50 43 33 31 32 30 30 30 37 38
                                              38
    RADIUS probe on ISE is activated and TCPdump shows the accounting packets from the switch (see attachment).
    I configured a profiling rule ot check for DHCP-Hostname with "contains". This rule does not work however. The device is getting profiled with a MAC-OUI via RADIUS-probe but the DHCP-Profile is not working.
    Is this supposed to work?

    That is interesting. I haven't worked with the "Device Sensor" much so I am running out of ideas. I really thought the certainty level was going to fix your issue as I have had issues similar like yours in the past where the certainty level of my custom rule was the same as a default one so mine custom rule was never hit. . I thought this was the case with you since your device was hitting the parent policy of "HP-Device" but not moving any further. With that being  l would still recommend keeping your custom conditions with higher certainty levels to avoid such situations.
    Couple of more things:
    1. What profiling probes do you have enabled?
    2. Have you tried retrieving the DHCP hostname via another sensor/method. For example, via the DHCP probe and ip-helper?
    3. Do you have the following commands entered on your switch:
    access-session template monitor
    no macro auto monitor
    device-sensor accounting
    device-sensor notify all-changes

  • Roaming profile not working anymore

    hi
    im definitely shure, in a earlier version of ZCM 10.0, the Roaming Profile to the Home directory did work and so, i never checked this since then.
    now i updated to 10.3.1 and roaming profile does not work anymore. the local profile gets not copied to the Home-Directory on the server, it doesnt depends, if i have the "Edir Home" set or the real path to the directory.....
    where can i start to search for this problem ? i was so shortly to go "productiv".......but no, there is again a delay after 6 Months waiting and testing....:-(
    it's so sad ! Zenworks is not that quality product it was.....
    Sascha

    hi craig
    sorry, about not enough informations.....
    - no, all clients are only in the E-Dir
    - Clients are Windows XP SP2 with Novell Client 4.9 SP2, but tested also higher ones...
    - Home-directory is on a Netware 6.5 SP8
    - ZCM Server is SLES 10 SP3 without OES
    thanks
    Sascha
    >>> craig wilson<[email protected]> 27.08.2010 17:36 >>>
    Are your devices a member of a Windows Domain?
    What Client OS?
    What type of Server do the Home Directories reside?
    On 8/27/2010 11:17 AM, Sascha Oetiker wrote:
    > hi
    > im definitely shure, in a earlier version of ZCM 10.0, the Roaming
    > Profile to the Home directory did work and so, i never checked this
    > since then.
    > now i updated to 10.3.1 and roaming profile does not work anymore. the
    > local profile gets not copied to the Home-Directory on the server, it
    > doesnt depends, if i have the "Edir Home" set or the real path to the
    > directory.....
    > where can i start to search for this problem ? i was so shortly to go
    > "productiv".......but no, there is again a delay after 6 Months waiting
    > and testing....:-(
    > it's so sad ! Zenworks is not that quality product it was.....
    > Sascha
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Knowledge Partner
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.

  • Cs5.5 - OSX 10.7 CMYK ICC Profile not visible?

    Hi
    Hoping someone can help here.
    IT department have installed a new Macpro into our prepress/design area using OSX 10.7 Lion with CS5.5 and now we are not able to use/see any of the custom CMYK ICC profile we use for printers - laser or epson wide format inkjet on any of the CS5 apps.  Prior to the new mac we had no issues as we were using 10.6.8 and CS4.  I have read through many forums and release notes regarding issues with Lion and CS5 but haven't found any reference to Custom ICC Profile issues.
    The ICC profile we urgently need is for our Epson 7800 using custom stock for proofing - specifically supplied for our color management to output to Forgra39 standard.
    Had a specialist come in and he's baffled as well. 
    Any help with this would be MOST appreciated.
    Thanks Mike

    The ICC profiles are not visible to Applications as Output profiles i.e. Printer profiles.  We have double checked the paths and they are correct and the profiles are installed.  but they do not show up in Indesign, illustrator etc as a printer profile... In fact no cmyk profiles (even those supplied from Adobe i.e fogra39.icc) show up.   When we open up colorsync we can see them but when we try any application to output to a cmyk print (laser or inkjet) the cmyk profiles are not visible.
    any help much appreciated in advance
    cheers Mike

  • Profiles not working as expected

    I have created a simple publication for a webi report  using efashion uiniverse. It's in BO 4.0. I have created 2 profiles. One is State=California and another is Month= 2. If I add any one of the profile to the publication, it works fine.
    Example:
    Case 1: when I add the profile state=california to the publication, i get data for only state=California.
    Case 2: If i remove the profile state=california and add profile month= 2 to the publication , then i get data only for month=2.
    Case 3: Now if I add both the profiles state=california and month=2, i get data for sate=california and for all the months. The profile month=2 doesn't get applied.
    what's happening is that the profile which is added first is getting processed while the profile added second is not working. If I add the profile month=2 first and then profile state=california, then only month =2 gets applied and not state=california.
    Is there any settings that may be causing this behaviour?
    Below is the log :
    2012-01-17 01:57:44,072 INFO  [PublishingService:RunInstancePool-1] BusinessObjects_PublicationAdminLog_Instance_48714 - [Publication ID # 48714] - Running publication instance.
    2012-01-17 01:57:44,519 INFO  [PublishingService:RunInstancePool-1] BusinessObjects_PublicationAdminLog_Instance_48714 - [Publication ID # 48714] - The global delivery rule for this publication was met; publication processing will now begin.
    2012-01-17 01:57:46,168 INFO  [PublishingService:HandlerPool-0] BusinessObjects_PublicationAdminLog_Instance_48714 - [Publication ID # 48714] - Document jobs started for scope batch 48,721 [recipients "PGOWDA" to "PGOWDA"].
    2012-01-17 01:58:31,695 INFO  [PublishingService:HandlerPool-0] BusinessObjects_PublicationAdminLog_Instance_48714 - [Publication ID # 48714] - Distribution jobs started for scope batch 48,721 [recipients "PGOWDA" to "PGOWDA"].
    2012-01-17 01:58:42,272 INFO  [PublishingService:HandlerPool-0] BusinessObjects_PublicationAdminLog_Instance_48714 - [Publication ID # 48714] - Distribution to destination CrystalEnterprise.Managed was successful. Recipient: PGOWDA, Document Scope: Sales Revenue by Sates : 48730 (Excel) : (AND (IN_LIST Month "3" )(IN_LIST State "California" )).
    2012-01-17 01:58:42,797 INFO  [PublishingService:RunInstancePool-1] BusinessObjects_PublicationAdminLog_Instance_48714 - [Publication ID # 48714] - Publication scheduling complete.

    If I'm not wrong there are some considerations you must apply in your publication. Check in this guide:
    http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_bip_admin_en.pdf
    Page: 942 Chapter Managing profiles
    regards
    Erika

  • HR PD profile not working

    Dear Experts
    the below solution earlier it is worked but after system refresh it is not working?????????????????????????????/
    We have created the below PD profile based on the given requirement but when I assigned to person and check on" i" button in OOSB to see how many objects that he can able to see ..value is nill
    1. Req : create only one PD profile that should be assigned to the chief positions in org so that chiefs can see only the data that of positions/orgunits that are assign under him..
    Name : Manager
    No : 0
    Plan Ver : 01
    Obj type : O
    Object :           0        "here we dont maintaining any values, this values is pulled using the funtional module that assign"
    maintain : yes
    Eval Path : o-o-s-p
    status vector = 12
    depth = 0
    sign =
    period =
    function module  = RH_GET_MANAGER_ASSIGNMENT

    Try executing following tcodes instead which calls the reports:
    Step 1. S_PH0_48000112 - Check and Compare T77UU
    Step 2. S_PH0_48000110 - Regeneration INDX for Struct.Auth
    But if HRP1001 doesnot has entry then you might need to assign the org units to your users again via tcode PP01/PO13. To automate you can use a eCatt or LSMW script and use PP02 to assign org units to mass users by inputting the mapping of User ID/Position to Org units with appropriate relationship.
    Let me know how it looks like after running the above tcodes.
    P.S: Sorry for the typo, the reports are RHBAUS02 and RHBAUS00. Also change value of field "Threshold Value" to 1 for report RHBAUS02/tcode- S_PH0_48000112 before executing it
    Thanks,
    Sandipan
    Edited by: Sandipan Choudhury on Jan 3, 2011 12:02 PM

Maybe you are looking for