Icc profiles are not being recognized by epson printer from LR 5 in Mac OS 10.10 yosemite

After switching to Mac OS 10.10 (Yosemite) my epson 3880 is no longer recognizing the icc profiles. Is anyone else having this issue?
I've already reinstalled all epson drivers and printer options to no avail. I'm thinking that lightroom and the printer are not communicating the icc profile info?

Striebig wrote:
I'm thinking that lightroom and the printer are not communicating the icc profile info?
That's not how it works. If LR does the color management, it converts the image from its working space (linear ProPhoto RGB) to the space defined by the ICC printer profile that you have designated in the Print module and sends to the printer that (converted) data. The printer driver should be set to "No Color Management" and therefore has no need to know the ICC profile. If you set LR to "Color Management: Managed by Printer", no profile is designated in LR, the data is sent unconverted, and you have to set the driver interface to the appropriate ICC profile - again no communication of the printer profile, although LR does send data that describes the working space so that the driver can make the conversion.

Similar Messages

Columns are not being recognized when I print a scanned item

I am scanning to an editable document. The document I am scanning has columns but when I print the columns are gone and everything is put in a list. How do I correct this?
This question was solved.
View Solution.

Hi pattyc2738. Scanning items to 'editable text' (also called OCR) can be difficult. Depending on what software you are using, most programs to get the image from the scanning glass only recognize the words, and not the formatting. Columns would be a special formatting feature that most entry level OCR software will not work well with.
The “Scanning Text” section half way down this document may answer some basic questions you have:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bps02997&cc=us&dlc=en&lc=en&jumpid=reg_r1002_use...
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Registrations for certain software are not being recognized by my Imac.

Registrations for software that require web based verifications are not being recognized by my iMac 27 2010 10.6.8
Included in the list of software that I have been using for some over a year now is FCE 4, Bias Peak, and Sibelius, and iRealb from the app store.
This is not a new issue although with the latest security update installed last week, the problem has been exacerbated.
I had the problem last year but found that if I shutdown (not just restarted) and then powered up again all my registrations would be recognized. Now my workaround no longer seems to work. I actually went for about 5 months with no problems and then occasionally I would have the shutdown/power up until last week.
I mirror the same software on my Macbook Pro 10.6.8 and have had no problems.
Thanks for any help.
Michael

I can add Kindle reader to the software list now. I used it last week and this week the cloud didn't recognize my computer.
Also on the iRealb app downloaded from the Apple app store I get a dialog that says the software was purchased on another computer (which it was, my laptop) and asks me to verify with my iTunes ID. I try to verify and it is unsuccessful, can not verify your computer.
MT

URLs are not being recognized inside PDF

URL links inside a PDF that I've created in InDesign CS5 are not being recognized.
I have email and website URLs embedded inside a PDF that was created in InDesign. These links are being recognized and I can click on them in Chrome, Opera, IE or Safari on the Mac. Eg, hovering over the mailto or http URLs the cursor turns to a hand and the links are clickable. Firefox is the only browser that does not recognize ANY links in the PDF. The cursor doesn't change to a hand instead it just remains as the standard text insertion cursor. The links are not clickable.
Firefox 26.0
Adobe Reader plugin 11.0.4.63 (latest as of today)

Current Firefox versions have enabled a built-in PDF Viewer that doesn't have all features that other PDF readers like the Adobe Reader have or may not function properly otherwise.
You can change the action for Portable Document Format (PDF) from Preview in Firefox to use another application like the Adobe Reader or set to Always Ask in "Firefox > Options/Preferences > Applications".
You can set the pdfjs.disabled pref to true on the <b>about:config</b> page to disable the build-in PDF viewer.
*http://kb.mozillazine.org/about:config
You can check the value of the plugin.disable_full_page_plugin_for_types pref on the about:config page and remove the application/pdf part if present or reset the pref to the default via the right-click context menu if you want to display PDF documents in Firefox with another application (i.e. not the built-in PDF Viewer).
See also:
*https://support.mozilla.org/kb/view-pdf-files-firefox-without-downloading-them
*https://bugzilla.mozilla.org/buglist.cgi?component=PDF%20Viewer&product=Firefox&query_format=advanced&order=bug_id%20DESC&limit=300
<i>Please do not comment in bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html</i>

Some CD's with music burned to it, are not being recognized as having music files on them.

Some CD's with music burned to it, are not being recognized as having music files on them.

The format says Mac OS Extended. All of the settings were set during the disk image restore process. Even if I format the flash drive as extended journaled or some other format, all of these settings are reverted when I do the restore from the disk image. I will just copy all of the information that disk utility has so that you can see it.
Mount Point : /Volumes/Mac OS X Install ESD Capacity : 16.11 GB (16,106,110,976 Bytes) Format : Mac OS Extended Available : 12.3 GB (12,303,499,264 Bytes) Owners Enabled : Yes Used : 3.8 GB (3,802,611,712 Bytes) Number of Folders : 128 Number of Files : 876

Image Colour Profiles are not being applied

When I import images in to InDesign CC 2014 the embedded colour profiles are not being activated.
Therefore images are looking flat and a bit washed out on screen.
In order to apply the colour profile I have to right click on the image go down to Graphics and the colour settings and select the correct profile.
In the InDesign colour settings menu I have Colour management policies set to Preserve Embedded Profiles on RGB and Preserve Numbers (ignore linked Profiles) for CMYK. However changing these to other options makes no difference, the profile still need to be activated on each image.
I am working with RGB images that have the Adobe RGB 1998 profile embedded in them.
I cannot figure out why this is happening!??

Check your color settings.

HT1925 I cannot seem to delete apple soft ware from C/: program files/ common files...apple. It says I need permission, while I am the administrator. This seems to be interferring with my reinstallation of itunes. Currently my devices are not being recogn

I have been trying to remove all residual apple files from my computer in order to fully reinstall iTunes. My devices are not being recognized by iTunes currently. I keep finding an Apple file under C/: Program files/ common files/ ......Apple.. under that there is an Internet Services file folder.. I am the administrator and yet it says I need permission to remove these files.
Please advise.

See Troubleshooting issues with iTunes for Windows updates for some tips on cleaning up... Unlocker might be the tool in this case.
tt2

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

Podcast explicit tags are not being recognized

I'm using Squarespace as my website host, and have followed their instructions to insert the iTunes Explicit tag into our feed before submitting to the iTunes store. Unfortunately, after extensive testing with Squarespace support, the tags are being read properly in the XML feed, but each time I attempt to submit via iTunes, the Explicit tag is not recognized. Any help would be greatly appreciated.
Here is a copy of the XML output (provided by Squarespace support)
https://img.skitch.com/20120328-t5g175qa2mf3wr3t86ay7rtmwr.png

1. Try resetting your SMC.
Resetting the System Management Controller >>
2. Your laser pickup could be dirty. You can buy a cleaner disc for that.
3. It may be the media you're using, but it nothing is recognized, it may be hardware related.
4. Run your hardware tester.
5. Is your optical drive being recognized in your System Profiler?
-Bmer
Mac Owners Support Group - Join us @ MacOSG.com
  Mac611 Mobile Mac Support - about.Mac611.com
   iTunes:MacOSG Podcast | YouTube.MacOSG.com
                   An Apple User Group 
Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'

How can I add additional airport expresses to my system that are not being recognized by Airport utility?

I recently purchased time capsule to upgrade my wireless system. I have 3 airport expresses in my network; I was able to reconfigure one, but the other 2 won't reconfigure. They are not recognized by Airport utility after being reset; the time capsule and one reconfigured airport express shows up. I would like to use the other two airport expresses to extend my wireless system. I would appreciate any help and suggestions.

Unfortunately, you will have to use Apple's WDS setting for all of the devices on the network....Time Capsule, new AirPort Express and older AirPort Express devices.
That is going to slow things down tremendously on the network.
WDS only operates at "g" wireless speed, so you lose any "n" speed advantage of your newer devices.
Worse, the bandwidth is cut in half on the entire network for each device that is set up as "relay" or "remote" on the system.
So, the first "remote" (or relay) cuts wireless speed from 54 Mbps down to 27 Mbps. The second cuts everything down to about 14 Mbps and the third drops everything down to about 7 Mpbs. That is much slower than the old wireless "b" systems.
Compare that to "n" speeds of 130 Mbps or up to 300 Mbps (if you are using 5 GHz) and you can easily see that you are losing more than 90% of the speed capability on the network.
Do you even want to consider doing this?

Help... my disks are not being recognized

i wonder if anybody could help me...
we have had our macbook pro for well over a year now, all of a sudden yesterday the laptop stopped recognizing any CD's or any disks of any kind.
This is starting to become a problem, i would greatly appreciate any ideas as to why the computer is doing this or anything i could possibly do to fix it.
Thankyou

1. Try resetting your SMC.
Resetting the System Management Controller >>
2. Your laser pickup could be dirty. You can buy a cleaner disc for that.
3. It may be the media you're using, but it nothing is recognized, it may be hardware related.
4. Run your hardware tester.
5. Is your optical drive being recognized in your System Profiler?
-Bmer
Mac Owners Support Group - Join us @ MacOSG.com
  Mac611 Mobile Mac Support - about.Mac611.com
   iTunes:MacOSG Podcast | YouTube.MacOSG.com
                   An Apple User Group 
Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'

My devices are not being recognized by my itunes on my laptop why is this ?, my devices are not being recognized by my itunes on my laptop why is this ?

I have tried to sync my iphone 4s and my ipad mini to my itunes and it is saying that they are not recognised then when they are recognising they are saying sync cancled any suggestions ?

See Troubleshooting issues with iTunes for Windows updates for some tips on cleaning up... Unlocker might be the tool in this case.
tt2

My instant messages are not being recognized after update

After I did the latest update, some of my instant message are not coming up with the person's name from my contacts, rather, just the phone number is showing up.

Try resetting the SMC and pram
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
To reset PRAM/NVRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Updated to Mountain Lion and now my M-Audio ProjectMix or Mbox are not being recognized?

I do music production and my M-audio ProjectMix is a Firewire audio interface and Mbox Mini 2 don't work anymore? They're not even recognized within System Preferences.

Check the manfacturers website for updated software.

IPod Touch 3G (iOS 4.1) not being recognized in iTunes (10.5.2.11) on Mac OS 10.7 Lion

Prior to updating my Mac OS to OS (10.7.2) Lion, and thus while on Snow Leopard (10.6.8), I began experiencing problems with my iPod Touch 3G running iOS 4.1 which was not being detected by the latest version of iTunes (10.5.2.11). It was quite frustrating since i could access the iPod on other computers and with this same version of iTunes, with no problem and thus, it had to be a problem isolated to my computer. In addition, my iPod was working fine and therefore, didn't merit an OS restore and I was also reluctant to perform one. Lastly, it seemed like upon plugging my iPod into the USB ports, the mac would detect the device but would subsequently, partially eject eject so that the device would cease charging but would still be visible in System Profiler.
These were some of the solutions I sought, after not finding an answer specifically for Mac OS 10.7 Lion. I hope it helps, as this was a complicated fix.
I would recommend deleting the 'AppleMobileDevice' Service see: http://support.apple.com/kb/ht1747 (This should allow the device to remain connected and charging on the mac)
Re-install iTunes (latest version)
Also, make sure you have the most up-to-date version of Xcode which incorporate iOS connectivity in the software.
Launch 'Image Capture' from Applications, and in devices you should see your iOS device (iPod Touch in my case) appear in the 'Devices' tab
Select 'iTunes' in the dialog area which allows you to choose which app should launch the device.
Here, I noticed that iTunes didn't immediately respond, but by specifying iPhoto and Aperture, the iPod began to Open in these applications
At this point, I quit and re-install iTunes from a download from Apple's website.
Prior to re-running the installer I re-selected iTunes in Image Capture, and after the installer completed most of the installation, iTunes began to launch.
At completion, iTunes began to launch again, and loaded the iPod Touch in the side bar again.
P.S. I perhaps should acknowledge that I had spent maybe an entire week, crushed and loosing productive time over this problem. I eventually began to pray and trust God (Jesus) that it would eventually work again.

I have the same problem, that when iTunes is open it does not recognize when a CD is inserted. I don't have an answer but I have a workaround that may be similar to yours.
The problem occurred the first time I tried to import a CD after having updated iTunes on October 12. I think this is the first version to support iCloud (which I don't use). That version did not have a Help Menu. I reinstalled iTunes and now have 10.5.0.142. I did get a Help Menu but still no recognition of CDs.
I can import CDs if I close iTunes and let AutoPlay take over. I have AutoPlay set to "Import songs using iTunes". "Show songs using iTunes" is closer to the setting you want. When the CD is inserted AutoPlay opens iTunes and iTunes sees the CD.
Dell Studio XPS 435T
Windows 7 Home Premium Service Pack 1
iTunes 10.5.0.142

Icc profiles are not being recognized by epson printer from LR 5 in Mac OS 10.10 yosemite

Similar Messages

Maybe you are looking for