ICD-ST25 Win 7 64-bit?
Is the reason I can't get my 64-bit system to install a driver for this voice recorder the fact that Sony doesn't support the recorder any more? I don't want to waste my time. I should go find someone with an old computer, download the files, and throw away my recorder?
Solved!
Go to Solution.
There's been no changes to allow the ICD-ST25 Digital Voice Recorder to be compatible with Windows 7 64-bit due to its age.
If my post answers your question, please mark it as "Accept as Solution"
http://bit.ly/LapMagWin
Similar Messages
-
How to install 64 bit Lightroom 2 on Win XP 64 bit
I read that the default for WinXP is 32 bit, and I really want to install the 64bit version on Win XP 64 bit (not Vista).
Is it possible to do this? If not then I am definitely not buying it.
If yes, any instructions on how to force the install of the Trial version to install 64 bit.
If not, I hope PShop CS4 is made available in 64bit for Win XP 64bit.
Thanks,
DanThanks very much!
Just what I was looking for.
I will try this out with the Trial version right away.
Dan -
Can I install win 8 64 bit OS on dv6936 laptop win vista 64 bit OS
I just purchased the HP Pavilliom 500 destop and would like to upgrade my laptop with desktop OS.
Can I install my hp Pavilion 500 PC win 8 64 bit OS on my hp pavillion dv6936 laptop win vista 64 bit OSHi Ibdman,
You cannot use the Pavilion 500 desktop recovery disks to upgrade the operating system on your HP laptop.
You would have to purchase either: a Win 8 retail upgrade or full install disc to change the operating system on your laptop.
If you are considering upgrading your laptop you should consider Win 7 64 bit instead of Win 8.
Jaco
****I am not an HP employee****
Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
HP Products:
810-150se Desktop
17t-j000 Notebook
1380t Desktop
560z Desktop
Errare humanum est. -
All 3 existing/currently-used devices (Win XP pro 32-bit laptop, and 2 Android phones) are on Firefox 30 (latest version) and sync just fine; NEW laptop (a Win 7 64-bit laptop, HP pro650) says added, "Will Sync Momentarily" but no data transferred... Not a single bookmark, nor my theme or other configuration(s).
I realize, after finding hardware requirement, that 64-bit Win 7 allows Firefox to work fine and am using it right now (I downloaded v.30 Firefox as soon as I booted the brand new pc up today), it let me set up sync & everything, just never transferred any data...Almost impossibly time-consuming task to transfer the thousands of bookmarks & complete organization from my other laptop, and will not matter much if I cannot sync any new ones with it. I would hate to have to transfer everything into Chrome...
Am I out of luck with this 64-bit unit to sync at all until Firefox supports it in the future?
Same night...Later that evening:
Well...Update Here: Tried Waterfox and it worked perfectly, got everything in from XP pro pc. SuperFast browsing too.
Granted it is apparently a v.28, I think. Doesn't really matter to me. Now I'm going to try to import both Android bookmarks, etc. Will post my success or failure later.Hi D.Dao,
In order to further investigate the issue on Firefox 30, could you please turn on logging:
# Open about:config and turn on: services.sync.log.appender.file.logOnSuccess and services.sync.log.logger.engine.bookmarks
# Restart Firefox and look at: about:sync-log
# Logs and error messages will be located here
Links for log text support see [http://pastebin.mozilla.org/] See how to turn on logs or [https://quality.mozilla.org/helpful-tips-for-qa-of-sync/ Helpful Tips for QA of Sync]
Thank you! -
Flash Player 10 Not installing on Win 7 64 bit PC
Flash Player 10 download goes through install procedure and says it is installed but it is not.
After that There is always a Flash Player Install file on the PC.
When I click on that it goes through the install procedure and says it is installed but it is not.
Have tried above install more than 6 different times. Also on my wife's new PC.
Always the same bad result.
These two new PC's are both on WIN 7 64 bit OS.I tried the suggested method of uninstall and then install. Also the disable instructions for Norton AV.
Still no success. When I again check the list of programs in Control Panel for possible uninstall the Flash Player 10 has returned there.
But the player does not play when needed for some videos on Facebook, etc.
One thing I could not find to disable on Norton AV was "Smart Firewall." It was not in my NAV 2011.
Any other suggestions appreciated.
Frank Mitch
Date: Thu, 24 Feb 2011 11:51:01 -0700
From: [email protected]
To: [email protected]
Subject: Flash Player 10 Not installing on Win 7 64 bit PC
Hi, I would try this method and see if it works better. There is a link for FF(Firefox) If you don't use FF, ignore that. Also before you begin this procedure, I need to know what Anti-Virus/Spyware programs you have Installed. Some will block the Install of Flash Player and that needs to be taken care of first.
Download and SAVE to your Desktop the Uninstaller:
http://kb2.adobe.com/cps/141/tn_14157.html
Download and SAVE to your Desktop the Installer for IE- use the EXE Installer
http://www.adobe.com/products/flashplayer/fp_distribution3.html
Download and SAVE to your Desktop the Installer for FF- use the EXE Installer for plugin based (from the same site)
Close all browser windows, you only want to be looking at your Desktop.
Disable any messenger services, as yahoo, msn, etc in the system tray(area near the clock)
Be sure to use the Administrator Account.
Run the Uninstaller and when finished, Reboot(restart) your computer.
Run the Installer for IE, Run the Installer for FF(If needed/used) and when finished, Reboot.
Then go to this test site and test each browser:
http://www.adobe.com/software/flash/about/
You may want to print these instructions to make it easier to follow. If you have any questions, let me know.
Thanks,
eidnolb
> -
BIP Deskotop 11.1.1.6 (32-bit)
Office 2010 (32-bit)
Win 7 (64-bit)
The current certification matrix seems to say this is supported, however I am having the following problem:
1. I have an existing RTF template, with data template that works. I have run it to be sure, and can view output and verify.
2. If Iopen that RTF template in BIP Desktop, then remove a field, and then using the field browser ( or insert > field ) add that same field back, or a new one the report will not generate output.
Upload the RTF, and the process will finish with status warning, and it fails during post processing. I look at the Output Post Processor error. edit the RTF template with a text editor and see that instead of putting in a <?YOUR_FIELDNAME?> BIP Desktop has instead inserting something similar to the following: <?ref:xdo0001?>. The only solution I currently have is to manually change these tags, however for large BIP reports this is cumbersome, and unacceptable for a long term solution.
Is there a workaround? or reported bug? I couldn't find anything on MOS for this.
Here's the OPP log, you can see the error points to the "REF" element that was added by BIP:Desktop.
[5/29/12 1:26:38 PM] [8629358:RT6176186] Executing post-processing actions for request 6176186.
[5/29/12 1:26:38 PM] [8629358:RT6176186] Starting XML Publisher post-processing action.
[5/29/12 1:26:38 PM] [8629358:RT6176186]
Template code: XX123XML
Template app: MUTL
Language: en
Territory: US
Output type: RTF
[5/29/12 1:26:39 PM] [8629358:RT6176186] Output file was found but is zero sized - Deleted
[5/29/12 1:26:39 PM] [UNEXPECTED] [8629358:RT6176186] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(XSLT10gR1.java:611)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:239)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:182)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1665)
at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:975)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5936)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:302)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:176)
Caused by: oracle.xdo.parser.v2.XPathException: Namespace prefix 'ref' used but not declared.
at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:806)
at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:571)
... 17 moreSolution was to follow: Report Generation Fails Due to oracle.xdo.parser.v2.XPathException: Namespace prefix 'ref' used but not declared [ID 1337111.1]
-
Hi Friends,
I hope somebody can help.
I have an Ides Ecc6(java+adap) installation on Oracle 10..*.os win 2003 32 bit
Then I try to start the System in mmc the dispatcher is stopping (first yeloow then grey) and no error messages
when is see sys log in SAP MMC
erro: SAP-Basis System: Initialization DB-Connect Failed, Return Code 000256
when i try R3trans-d
Log:
C:\Documents and Settings\accadm>r3trans -d
This is r3trans version 6.14 (release 700 - 15.06.07 - 15:50:00)
unicode enabled version
2EETW000 sap_dext called with msgnr "2":
2EETW000 -
db call info -
2EETW000 function: db_ntab
2EETW000 fcode: NT_RDTDESCR
2EETW000 tabname: TADIR
2EETW000 len (char): 5
2EETW000 key: TADIR
2EETW000 retcode: 2
r3trans finished (0012)
Dev_wo.lo file
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Apr 16 14:07:43 2009
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\ACC\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\ACC\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\ACC\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.107)
B New connection 0 created
M sysno 00
M sid ACC
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 111
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 3724
M
M kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3724) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Thu Apr 16 14:07:44 2009
M DpShMCreate: sizeof(wp_adm) 18672 (1436)
M DpShMCreate: sizeof(tm_adm) 4232256 (21056)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1536)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06810040, size: 4892312)
M DpShMCreate: allocated sys_adm at 06810040
M DpShMCreate: allocated wp_adm at 06812090
M DpShMCreate: allocated tm_adm_list at 06816980
M DpShMCreate: allocated tm_adm at 068169B0
M DpShMCreate: allocated wp_ca_adm at 06C1FDF0
M DpShMCreate: allocated appc_ca_adm at 06C25BB0
M DpShMCreate: allocated comm_adm at 06C27AF0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06CA89B0
M DpShMCreate: allocated gw_adm at 06CA89F0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06CA8A20
M DpShMCreate: allocated wall_adm at 06CA8A28
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host oiam
M
M Thu Apr 16 14:07:46 2009
M calling db_connect ...
C Prepending D:\usr\sap\ACC\DVEBMGS00\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@ACC on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06DF1478 06DF6A14 06DF629C
C Attaching to DB Server ACC (con_hdl=0,svchp=06DF61E8,srvhp=06E07DD4)
C Starting user session (con_hdl=0,svchp=06DF61E8,srvhp=06E07DD4,usrhp=06E53768)
C Now '/@ACC' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=06DF61E8,usrhp=06E53768)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@ACC on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06DF1478 06DF6A14 06DF629C
C Starting user session (con_hdl=0,svchp=06DF61E8,srvhp=06E07DD4,usrhp=06E53768)
C Now 'SAPSR3/<pwd>@ACC' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance ACC is running on OIAM with ORACLE version 10.2.0.1.0 since APR 16, 2009, 14:07:26
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090416 140746 OIAM
C OCI-call failed with -1=OCI_ERROR
C SQL error 376: 'ORA-00376: file 25 cannot be read at this time
C ORA-01110: data file 25: 'D:\ORACLE\ACC\SAPDATA1\SR3_22\SR3.DATA22''
C *** ERROR => Error 376 in stmt_fetch() from oci_execute_stmt(), orpc=0
[dbsloci.c 12714]
C *** ERROR => ORA-376 occurred when executing SQL stmt (parse error offset=0)
[dbsloci.c 12733]
C sc_p=06D44E98,no=0,idc_p=00000000,con=0,act=1,slen=26,smax=256,#vars=0,stmt=06E1C138,table=SVERS
C SELECT VERSION FROM SVERS ;
C sc_p=06D44E98,no=0,idc_p=00000000,con=0,act=1,slen=26,smax=256,#vars=0,stmt=06E1C138,table=SVERS
C prep=0,lit=0,nsql=0,lobret=0,#exec=1,dbcnt=0,upsh_p=00000000,ocistmth_p=06E0FC68
C IN : cols=0,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rsize=0,vmax=0,bound=0,iobuf_p=00000000,vda_p=00000000
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C OUT: cols=1,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=0,upto=-1,rsize=144,vmax=32,bound=1,iobuf_p=003F2DC8,vda_p=06E1C3A8
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C SELECT VERSION FROM SVERS ;
B ***LOG BZA=> table SVERS does not exist on database [dblink#3 @ 1299] [dblink 1299 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10283]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M req.vm = no VM
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server oiam_ACC_00 on host oiam (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Apr 16 14:07:46 2009
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10486
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3724) [dpnttool.c 327]
thanks for support
keshavaHi Rohit
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid ACC
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 111
intno 20050900
make: multithreaded, Unicode, optimized
pid 3452
Fri Apr 17 14:17:27 2009
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3452) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 111 successfully loaded
shared lib "dw_xtc.dll" version 111 successfully loaded
shared lib "dw_stl.dll" version 111 successfully loaded
shared lib "dw_gui.dll" version 111 successfully loaded
shared lib "dw_mdm.dll" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Apr 17 14:17:32 2009
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0225.qqq.nxst) took 5 seconds
Fri Apr 17 14:17:36 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >oiam_ACC_00 <
DpShMCreate: sizeof(wp_adm) 18672 (1436)
DpShMCreate: sizeof(tm_adm) 4232256 (21056)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1536)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06810040, size: 4892312)
DpShMCreate: allocated sys_adm at 06810040
DpShMCreate: allocated wp_adm at 06812090
DpShMCreate: allocated tm_adm_list at 06816980
DpShMCreate: allocated tm_adm at 068169B0
DpShMCreate: allocated wp_ca_adm at 06C1FDF0
DpShMCreate: allocated appc_ca_adm at 06C25BB0
DpShMCreate: allocated comm_adm at 06C27AF0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06CA89B0
DpShMCreate: allocated gw_adm at 06CA89F0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06CA8A20
DpShMCreate: allocated wall_adm at 06CA8A28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Apr 17 14:17:37 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 3652
argv[0] = D:\usr\sap\ACC\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\ACC\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\ACC\SYS\profile\ACC_DVEBMGS00_oiam
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1045
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=ACC
argv[7] = -DSAPMYNAME=oiam_ACC_00
argv[8] = -DSAPPROFILE=D:\usr\sap\ACC\SYS\profile\ACC_DVEBMGS00_oiam
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
***LOG Q0K=> DpMsAttach, mscon ( oiam) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >oiam_ACC_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
Fri Apr 17 14:17:38 2009
DpJ2eeLogin: j2ee state = CONNECTED
Fri Apr 17 14:18:25 2009
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Fri Apr 17 14:19:53 2009
J2EE server info
start = TRUE
state = ACTIVE
pid = 3652
http = 50000
https = 50001
load balance = 1
start_lazy = 0
start_control = SAP J2EE startup framework -
Weblogic 10.3.0 on Win 2k3 64 bit
Hi All
I have installed Weblogic 10.3.0 on Win 2K3 64 bit and created a domain with using Sun JDK 1.6.0_10.
The server crashes when I enter the username on the prompt while starting the server. But if I hard-code the userID/pwd in the SetDomainEnv.cmd file, the server works fine.
The error that I am getting in the first case is:
Enter username to boot WebLogic server:weblogic
<Oct 6, 2010 2:53:38 PM CDT> <*Error*> <Security> <BEA-090782> <Server is Running in Production Mode and Native Library(terminalio) to read the password securely from commandline is not found.>
<Oct 6, 2010 2:53:38 PM CDT> <Notice> <WebLogicServer> <BEA-000388> <JVM called WLS shutdown hook. The server will force shutdown now>
<Oct 6, 2010 2:53:38 PM CDT> <Alert> <WebLogicServer> <BEA-000396> <Server shutdown has been requested by <WLS Kernel>>
<Oct 6, 2010 2:53:38 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Please let me know if anyone of you have the resolution to this problem.
ThanksYou might try to rename (.old) the admin server cache files and try again. They are located at xxxdomain\servers\admin (4 folders - cache, data, tmp, security).....
-
I am using ITUNES 11 on Win 7 64 bit. I can download podcasts to my IPOD touch just fine but when I click on the ITUNES store I get an error message that stays "ITUNES has stopped working". How do I trouble shoot or fix this? Thanks
Try gn_id's suggestion from the following post:
Re: iTunes 11 crashes when opening the store - no error message -
USB Device Not Recognized (IPod Touch 5g) (Win 7 64 Bit)
I have seen many threads for this but nothing that they suggest has fixed this for me.
http://i165.photobucket.com/albums/u45/JediJake2429/Capture_zps9d26bcea.png
I have an I touch 5g Model MD724LL/A, IOS 7.1.1
I have two Win 7 64 Bit Machines.
I tried two cables,
I tried two computers,
I have restored it,
I have put it into recovery mode,
I have uninstalled all apple software, and removed all traces from the registry,
I have done a fresh install of Itunes on the laptop which had never had it on there before,
I have ran the windows troubleshooter, and the Microsoft fix it troubleshooter,
I have removed all traces of the ipod driver and tried updating,
I have updated the driver from the itunes folder on my pc,
I have tried everything listed here: My iTouch 5th generation is not recognised by my computer. why?
I have tried everything listed here: Windows 7 blocks my iPod Touch
I have tried everything listed here: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/ipod-touch-5 th-generation-not-recognized/85dac803-680e-4ce8-842c-9f58b0df7f7f
My wife even took it to the apple store today and they told me that it is a windows 7 issue. they basically would not do anything for her.
Funny thing is, after trying everything that was suggested to me online, by those at the apple store, and using my own PC knowledge as I also work in IT, it still does not recognize the driver. So it seems to me that Apple need to get their drivers updated to be compatible.
I currently have a $400 piece of crap Ipod that I cannot use because apple cannot make a driver that works.
Anybody that has anything new to suggest, be my guest.Illaass,
It works connected to another apple device. I have TWO windows 7 64 Bit Machines both with widely different configurations, and they both have the same exact issue. This IS a driver issue, that much I agree with apple on. However its not a WINDOWS issue. APPLE makes the driver that is installed with Itunes. That Driver does not work. (As a side note, Apple really should get their head out of their A$$ and come up with better solutions vs telling their customers to restore their windows config. That's straight up BS.)
JEM24,
I have done that. I have also taken a PC that had never had any apple software on it and installed itunes on that. Tested, same result. -
Hi,
I'm not able to install itunes in my Win 7 , 64 bit. getting the below mentioned error.. any help would be greatly appriecated.
" Could not open key: UNKNOWN\Components\DA42BC89BF25F5BD0AF19C3B9B1A1EE8\C0B7E33AC99B9CE47B20A823B86 1A19F. Verify that you have sufficient access to that key. or contact your support personnel."NCPlater to all haveing the error: ***I HAVE THE ANSWER***
iTunes
Could not open key:
UNKNOWN\Components\DA42BC83BF25F5BDOAF18C3B9B1A1EE8\3e43b73803c7c394f8a6b 2f0402e19c2. Verify that you have
sufficient access to that key. or contact your support personnel.
After following instructions for three different solutions that did NOT work; I found the solution that did work
on the support site for Syamntec.
Readers - Please, you must be VERY familiar with pc jargon and windows vernacular to accomplish the reset
of ALL the permissions in your registry.
Follow the ditrections below and pay attention to the notes for those running 64bit Win7.
Step one, back up the registry.
Step two, go to the MS KB: http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf -ed6985e3927b&displaylang=en and download the file that installs subinacl. It is an MSI file, and will do a quick install of a few Microsoft files. Hint: Look in the folder listed below, "subinacle.exe" may already be there.
Step three, create a batch file (subinacle.bat) with the following commands: (Use Notepad - copy & paste, not the red stuff)
cd /d "Program Files\Windows Resource Kits\Tools" (only for 32bit/x86 machines)
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f
subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f
subinacl /subdirectories %SystemDrive% /grant=administrators=f /grant=system=f
subinacl /subdirectories %windir%\*.* /grant=administrators=f /grant=system=f
secedit /configure /cfg %windir%\inf\defltbase.inf /db defltbase.sdb /verbose
For 64bit machines substitute for first line of bat file:
cd /d "c:\program files (x86)\windows resource kits\tools"
Step four, run the batch file. Let it run until the Command Prompt screen closes, may take 30 minutes or more.
Step five, reboot the machine and run the install again.
Ladies and Gentlemen; this worked for me and allowed immediate installation of two application packages I had been trying for three months! (Including ITunes 10.5) -
Audigy 4 Pro microphone problems in Win 7 64-bit
Hi there,
Since I put my Audigy 4 Pro card into my newer PC with Win 7 64-bit the microphone only seems to work when it wants to, or works but sounds messed up.
I've waited a while before posting about this because I thought the newer drivers would sort out the problem, but it remains the same.
The card/microphone works without a problem if I put it in a PC with Win XP.
Sometimes the microphone will not pick up any sound at all. Other times it will work, but only for? game, say Heroes of Newerth. Then in Windows using teamspeak, people describe the sound like I'm talking through a fan. Tried using the in-game VOIP but I get the same result.
After a restart or just some random day, people in Heroes of Newerth would discribe the VOIP from my side as if I was talking under water(or through a fan), but then it would work fine for teamspeak or Bad Company 2 or any other game. I used these 2 games as an example since its what I'm playing mostly at the moment.
There doesnt seem to be any consistancy with the problem.
I have recently removed the sound card from my PC and now forced to use the onboard sound that reminds me of the sound of a clockradio.
My PC specs are:
Asus Rampage Formula Motherboard
Intel Core 2 Duo 3.0GHz E8400
8GB RAM
4 x WD Raptor HDD Stripe RAID
ATi Radeon 4870 52MB
Sound Blaster Audigy 4 Pro?(model number shown?is SB0290)
Using?a Sennheiser PC350 Headset.
What I have tried my side so far:
Tried latest and older drivers for Win 7 64-bit
Reinstalled Windows 7 several times with different drivers.
Tried disabling all devices except for line/mic
Tried other input devices.
Tried with different audio and sound codecs, tried without any.
Might have been or 2 other things I tried I cannot think of now.
Is there anyone that experienced similar problems and got it fixed? Any help would be appreciated.Hi Bill,
Can you be more specific about which steps were not recorded?
There some things that will not be recorded. The release notes list some known issues.
Known Issues:
Tutorial Builder can only capture actions in Photoshop that are recorded by the ScriptListener plug-in. While this includes most of Photoshop's functionality, some features/tools are not recorded. In particular, brushing actions are not captured. We hope to address this in future releases of Tutorial Builder.
Some of the the actions that Tutorial Builder captures are not yet instrumented to produce detailed text instructions in the final tutorial. For such actions, the generated tutorial will include a step that says "The (action name) is not yet supported by Tutorial Builder," and the tutorial author will have to edit the HTML to provide more descriptive text. Note that the "Show me in Photoshop" link is still generated for such actions.
Some Photoshop actions allow the user to specify a set of parameters in multiple ways, but Tutorial Builder cannot detect how the user specified those settings during the recorded demonstration. Thus, the text in the generated tutorial may not describe exactly what was demonstrated. For example, in the Image > Adjustments > Levels tool dialog box, you can update the parameters using three different eye droppers. Since Tutorial Builder does not know which (if any) of these eye droppers were used, the text for a Levels adjustment does not describe exactly how the settings are specified. Again, the tutorial author can simply edit the HTML to provide a more accurate description.
Thanks!
Mira -
HP C4380 software fails to install on Win 7 64 bit
My HP C4380 printer scanner stopped working, so I added another printer with working scanner to my wireless network, but then I could not get my HP C4380 to run even though it was default, so I uninstalled the other printer because I prefer my HP. After uninstalling the other printer, I could not run my HP at all. I received the message it wasn't connected. I tried to hardwire it. No luck. Then, I followed scan and print doctor which told me to uninstall and reinstall software. I uninstalled and then used my HP cd to reinstall and got message it did not meet system requirements (Win 7 64 bit). I went online and tried to reinstall the C4380 software. The software appears to be installed but my printer shows up as an "unspecified" rectangular box under devices instead of a printer under "printers." So now I have no printer. How do I correct this problem?? Thank you.
This question was solved.
View Solution.Hi EvelynMae,
Welcome to the HP Forums! I see that, your HP Photosmart c4380 software is failing to install on Windows 7. I am
happy to help you with this issue! I have a couple of questions for you:
Can you make copies with the printer?
Is the power cable plugged directly into the wall, or a surge protector? Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
In the meantime, I would try uninstalling the software, and then re-installing again, using the HP Printer Install Wizard for Windows.
Hope to hear from you, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
11g R2(11.2.0.2)-Not able to connect using SID - Win 7 32 bit
Hi Experts,
I have installed 11gR2(11.2.0.2) on Win 7 32 bit OS.
I am able to start database and listener services without any problem. ORACLE_BASE and ORACLE_HOME variables are set.
I am even able to connect to database using "sqlplus user/pass". (With ORACLE_SID variable set)
However, sqlplus command hangs when I try to connect using SID "sqlplus user/pass@o11gr2".
(No error, after waiting for >20 minutes I have to kill the command.)
=================
Following in "C:\Oracle\product\11.2.0.2\dbhome_3\RDBMS\trace\o11gr2_ora_6352.trc"
- "2012-04-05 09:50:55.846: [ default]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\ocr cannot be opened. error 2"
Following in "C:\Oracle\product\11.2.0.2\dbhome_3\log\machinename\client"
- 2012-04-26 14:35:18.781: [ default][1216]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\olr cannot be opened. error 2
[ CLSE][1216]clse_get_crs_home: Error retrieving OLR configuration [0] [Error opening olr registry key. The system cannot find the file specified.
"tnsping" returns OK for "tnsping o11gr2", "tnsping localhost", "tnsping 127.0.0.1", "tnsping 192.168.0.1"
Output of LSNRCTL:
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
Start Date 26-APR-2012 14:35:17
Uptime 0 days 0 hr. 4 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\listener.ora
Listener Log File C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
Services Summary...
Service "O11GR2" has 2 instance(s).
Instance "O11GR2", status UNKNOWN, has 1 handler(s) for this service...
Instance "O11GR2", status READY, has 1 handler(s) for this service...
The command completed successfully
=================
This was working earlier. One day it stopped working all of a suddent and I am not able to connect using SID till now.
I tried re-installing in different home multiple times. But no luck even after disabling firewall completely.
Any suggest/help is greatly appreciated on this.------------------------------tnsping-------------------------
C:\>tnsping o11gr2
TNS Ping Utility for 32-bit Windows: Version 11.2.0.2.0 - Production on 26-APR-2012 14:54:32
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = J1009615W7LT.jda.corp.local)(PORT = 1521
))) (CONNECT_DATA = (SERVICE_NAME = O11GR2)))
OK (30 msec)
C:\>
-----------------------------ping-------------------------------
C:\>ping J1009615W7LT.jda.corp.local
Pinging J1009615W7LT.jda.corp.local [fe80::20c9:b748:311a:95e4%14] with 32 bytes of data:
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Ping statistics for fe80::20c9:b748:311a:95e4%14:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\>ping 10.60.200.221
Pinging 10.60.200.221 with 32 bytes of data:
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Ping statistics for 10.60.200.221:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\>
-----------------------------C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml---------------------------------
</msg>
<msg time='2012-04-26T14:35:18.855-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
</txt>
</msg>
<msg time='2012-04-26T14:35:26.200-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:35:26 * ping * 0
</txt>
</msg>
<msg time='2012-04-26T14:35:43.204-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:35:43 * ping * 0
</txt>
</msg>
<msg time='2012-04-26T14:35:55.952-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Dynamic address is already listened on (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
</txt>
</msg>
<msg time='2012-04-26T14:35:55.953-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:35:55 * service_register * O11GR2 * 0
</txt>
</msg>
<msg time='2012-04-26T14:37:08.732-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:37:08 * ping * 0
</txt>
</msg>
<msg time='2012-04-26T14:38:34.943-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:38:34 * (CONNECT_DATA=(SERVICE_NAME=O11GR2)(CID=(PROGRAM=C:\oracle\product\11.2.0.2\dbhome_3\bin\sqlplus.exe)(HOST=J1009615W7LT)(USER=j1009615))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::20c9:b748:311a:95e4%14)(PORT=51907)) * establish * O11GR2 * 0
</txt>
</msg>
<msg time='2012-04-26T14:39:23.627-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>WARNING: Subscription for node down event still pending
</txt>
</msg>
<msg time='2012-04-26T14:39:23.628-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:39:23 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=j1009615))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186647040)) * status * 0
</txt>
</msg>
<msg time='2012-04-26T14:54:25.550-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>System parameter file is C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\listener.ora
</txt>
</msg>
<msg time='2012-04-26T14:54:25.551-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Log messages written to C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml
</txt>
</msg>
<msg time='2012-04-26T14:54:25.552-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Trace information written to C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\trace\ora_11640_3776.trc
</txt>
</msg>
<msg time='2012-04-26T14:54:25.553-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Trace level is currently 0
</txt>
</msg>
<msg time='2012-04-26T14:54:25.553-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>
</txt>
</msg>
<msg time='2012-04-26T14:54:25.555-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Started with pid=11640
</txt>
</msg>
<msg time='2012-04-26T14:54:25.560-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
</txt>
</msg>
<msg time='2012-04-26T14:54:26.695-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Listener completed notification to CRS on start
</txt>
</msg>
<msg time='2012-04-26T14:54:26.712-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
</txt>
</msg>
<msg time='2012-04-26T14:54:29.880-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Dynamic address is already listened on (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
</txt>
</msg>
<msg time='2012-04-26T14:54:29.881-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:54:29 * service_register * O11GR2 * 0
</txt>
</msg>
<msg time='2012-04-26T14:54:32.090-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:54:32 * ping * 0
</txt>
</msg>
Edited by: 850920 on Apr 26, 2012 11:59 AM -
DITA templates erratic in FM10 on Win 7 32-bit
We are a writing team of 4 - two using Windows XP 32-bit, one using Windows 7 32-bit and until recently I was using Windows XP 64-bit. We are all using TCS3, with FM10.
We developed our desired DITA templates (task, topic, concept, etc.), updated our EDD and edited our structapps file and everything was working perfectly on the XP 32-bit and XP 64-bit systems. Our fourth colleague joined us, was given the Win 7 32-bit, and tried to set up our templates to use. They all worked fine, except for the Task template - which will not open a new file, nor allow her to open any existing Task .xml or .fm files.
Then, for other reasons, my OS was switched from XP 64-bit to Win 7 32-bit, and I had to set up the templates again after loading TCS 3 on. Now, all of the templates are working perfectly, except for Topic. If I choose DITA>New DITA file>New Topic and choose the template, it starts to open the file window and then just shuts down again, no error message, no file, no nothing. If I try to open an existing topic.xml file I get this error message:
XML Read Report Log
November 15, 2012 10:14 am
Source Document: R:\User_Manuals\baseline\...\Topic\12AJF070H4Y.xml
XML Read Messages...
Cannot open the template file ($STRUCTDIR\xml\DITA_1.2\app\technicalContent\template\TemplateMasterTopic.fm)
Which is exactly what happens when my colleague with 7 32-bit tries to open a task file. Any ideas on what could be happening, that would make one file type unable to access a template, when all the others work exactly as they should be?
If I've missed including any information that would help clarify the situation, please let me know!All very strange.
I'd start by testing the default apps. Hopefully, you have created new apps rather than modifying the default apps .. yes? If so, switch back to the default apps and see if you're getting the same behavior. If this is happening with the default, unmodified, apps, you'll know that it's a system issue of some kind .. if it on;y happens with your apps, then it's likely a problem with your apps.
In your second post, you say some things that I don't really understand ..
1) You said .. "If I click File>Open>select our task.template.fm.xml it opens with a TASK top level element." .. why do you have a file named "task.template.fm.xml"? Templates are typically FM binary files not XML files. Was this a typo or can you explain what this file is used for?
2) You said .. "If I click DITA>New DITA File>New Task>select out task.template.fm it asks if it can open in .xml, I say yes, it opens with a TASK top level element." .. If you select "New Task" (or any new DITA topic type), it's asking for a new file name. If you're selecting the file "task.template.fm", FM thinks that you want to name the new file with that name, but an XML file cannot have a ".fm" extension so it asks if it's OK to use ".xml" as the extension. This then creates a new file named "task.template.fm.xml" (perhaps that's how you got the file in my question #1). My question is .. why are you doing this? Selecting the template file will have no affect on things, and just ends up creating a file with an odd name in the app folder.
Let me know how the testing with the default apps goes, and with a bit more info we may be able to resolve your problems.
Cheers,
...scott
Maybe you are looking for
-
How can I get albums back that are on my hard drive that seem to have
uninstalled from iTunes. I have some songs that are on my iPod, but no longer in iTunes....why did this happen, and can I correct it without having to do each song or album individually? Thanks!
-
There must be some way to save a file (photo, picture, text etc) without the program coming along with it - is there? Because, with my post card that I made on my "The Print Shop 2" and along with photo's edited on Photoshop, I will be taking them do
-
We all have same problem but it seems that apple doest care...
We all have same problem but it seems that apple doest care...
-
Where can I find Vimeo in the menu after the latest ATV2 software update?
Nowhere to be found. Dutch language but that shouldn't matter
-
my iphone 5 has been put in washing machine by accident and i have dried it out it works but there is water behind screen pleasehelp dont know what to do i can repair would it be best to buy new screen HELP!!!!