Iceberg Reader will not work after updating iPhone 4

I updated my iPhone last night to the current software and everything is working fine but the Iceberg Reader and the books downloaded that use Iceberg to load.
I have looked online for any sort of discussion about this, but cannot find a thing...
Many thanks!

That's a bunch of hogwash.  My 4S is running iOS 6 and works with all my external speakers, both at home and at work.

Similar Messages

  • HT201401 Speakers will not work after updating iPhone 4 to iOS.  Apple Store said there are no speakers available which will work with the iOS6.  Does anyone know where to get speakers which will work with iOS6?

    After updating my iPhone4 to iOS6 my speakers do not work.  The Apple store after troubleshooting said that none of the speakers they sell will work with iOS6.  Does anyone have any suggestions for obtaining speakers which will work with iOS6?

    That's a bunch of hogwash.  My 4S is running iOS 6 and works with all my external speakers, both at home and at work.

  • Printer will not work after update to Mavericks

    I have a macbook pro and an HP7280 printer connected wirelessly.  After upgrading to Mavericks the printer will not work.  The first time I used it the system upgraded automatically (I forget what it said but it just went ahead and did some upgrading)  When I clicked on something to print it did recognized the printer but just scrolled and scrolled and never printed.  So I deleted the printer and reset the system and then added the printer back on - same thing.   Any ideas??

    It means there is no issue with the driver you are using and with it working correctly on Mavericks. So you have a network issue with the printer queue you are using. Normally a reset of the printing system and re-adding the printer would be enough to get things working again. But since you have done this and your issue is not resolved, there must be some other gremlins in the system.
    With the HP connected to the network, if you know its IP address you can enter this as a URL into a web browser. This should result in you connecting to the internal web page of the HP. Does this work?

  • Pavilion dv5020ca sound will not work after updating xp to vista home premium

    HP Pavilion Dv5020ca   windows vista home premium
    After upgrading from xp to vista the drivers for my sound card will not install and the error message i recieved was
    cannot find media any help would be apperciated
    This question was solved.
    View Solution.

    Hi:
    See if installing the XP audio driver works...
    Download and run this driver.  If it automatically installs the audio, great.  If not...close out of any error windows.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-42513-1&cc=us&dlc=en&lc=en&...
    Go to the device manager and click on the multimedia audio controller needing drivers.
    Click on the driver tab.  Click on update driver.  Select the Browse my computer for driver software option and at the bottom of that window, select the Let me pick from a list of device drivers on my computer.
    The select Have Disk and browse to: C:\SWSetup\sp33443\CPL30A5a and select the Conexant High Definition Audio from the list and see if the driver installs.
    Then reboot.

  • Highlight in Adobe Reader X not working after update to 10.1.1

    Hello
    We have an application aimed at assisting people with reading difficulties. For that purpose we have written an Adobe Reader plugin which makes our application able to read text from PDF documents. While it reads it also highlights the words it is reading so that the user can keep up with it. However, after the 10.1.1 update of the Reader the highlighting no longer works.
    The plugin was originally developed using Acrobat SDK 8.1, but the problem remained even after I upgraded to SDK 10. The highlighting is done using the AV-layer with the AVPageViewHighlightText() method.
    We need to know if there is something in this recent update which breaks the highlight functionality, and if so, is it intentional?
    PS: We are running with Protected Mode disabled since reading doesn’t work at all with it.

    Ok, I found the problem.
    We are using the void AVPageViewDrawNow(AVPageView pageView) method to make sure that some changes are applied in certain cases. The behavior of this method seems to be different in Adobe Reader 10.1.1. Removing the call brought our highlighting back to life.

  • EOS Utility will not work after update - 70D and Windows 8.1

    I hope someone can help. I updated my EOS Utility on July 20, 2015, and switched to EOS Utility 2, incl. the updater (an add-on installation on the Canon site). After that, nothing happens when I connect the camera and try to open EOS Utility. I can hear (jingle) that the computer still recognizes the camera. Around that day, my computer also installed a Windows update. I have unistalled EOS and reinstalled it, both with and without the updater. Still nothing happens. Has anyone else had the same issue? On another forum, disabling wifi seemed to work, but I checked that wifi is already disabled (even by enabling and re-disabling it). Any ideas are gratefully accepted. Thank you.

    You would be much better off to add an exception for the software you're getting a flase positive on, than to disable AVG. You can do this within AVG by looking for "Exceptions" under the "Advanced Settings" dialog (found in the Options menu). This is not uncommon and it just means there's some byte pattern in your file that is similar to a known virus.  If you disable AVG you're opening yourself up to attacks while it's off.  By adding an exception AVG will just ignore that file, and since you know it's OK, that's safe.

  • HT4528 iphonwe will not work after updating it

    My iphone os4 gave me an update notice. When I did the update it froze and all I can get is a picture of a usb cable and the itunes logo. I have tried to troubleshoot it many times and just before it finishes it says it cannot find the device. I have updated itunes on my computer but it didn't make any difference.

    I had a similar problem after up-dating earlier last week. I lost all tracks on my 20g iPod and my computer wouldn't recognise the iPod. My computer guy came in today and took 3 hours to fix it. He tried re-installing the iPod software to no avail then the iTunes software also no good. After going into My Computer and clicking iPod he then clicked "Bootex" which said that there were "unrecoverable errors" on the hard disk in the iPod. He then "stripped" (as he put it) the iPod out, reinstalled everything and all is now OK. I am not computer literate but hope that this helps you.

  • Printer connected to Airport will not work after update

    I recently updated my airport express firmware to the 7.6.1. The printer was working just fine before I did this. It is connected to the airport base station via USB. The error message is " USB write error: Unable to send 1024 bytes of  data"
    As I said before everything was fine until I updated the firmware. Any suggestions? What can I do?

    Suggest that you try the following:
    Open System Preferences (gear icon on the dock)
    Open Print & Scan
    Click on the installed printer to highlight it
    Click the -- (minus) button at the bottom of the list to delete the device
    Close the Print and Scan box
    Power down and restart your Mac
    Make sure that the printer is plugged into the USB port and powered up
    Open Sysem Preferences
    Open Print & Scan
    Click the + (plus) button at the bottom of the printer list area
    Hopefully, your printer family will appear in the next window that opens
    If yes, click the printer name to highlight it
    Click Add
    Try to print. Be sure to select the correct printer since it may also be installed on your Mac.
    Power down and retart the printer if needed
    Report on your results

  • Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    BSNL is not a supported carrier. Personal Hotspot requires carrier support and provisioning of the account to enable it. iOS 7.1 disabled the ability to manually configure Personal Hotspot on unsupported carriers.

  • WiFi iPhone 4S does not work after update iOS 6.0

    WiFi iPhone 4S does not work after update iOS 6.0

    This sounds more like a hardware issue.
    Have you checked that the dock connector port is not dirty?

  • My wi-fi on my iPhone 4S is not working after updating to ios7 and is a few weeks out of warranty, the Apple store wants me to pay £160 for a new one, are they joking?!

    My wi-fi on my iPhone 4S is not working after updating to ios7 which was working perfectly fine before. It is a few weeks out of warranty now and the Apple store wants me to pay £160 for a new one, are they joking?!

    Hi there Juicy Guava,
    You may find the troubleshooting steps in the article below helpful.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    -Griff W. 

  • My iMessage and facetime is not working after updating to ios 7... My ipad works perfectly and it's the same apple id.  Any answers or reasons why on the iPhone 5 is not working???

    My iMessage and facetime is not working after updating to ios 7...
    Any answers on how to fix it?  I've tried to restart, restore connected to itunes, but nothing.

    ACTIVATING FACETIME AND IMESSAGES
    Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS.  Check with your carrier to see if your plan supports sending of international SMS messages.  If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)).  Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation.  If that does not fix things read the following articles:
    http://support.apple.com/kb/TS4268
    http://support.apple.com/kb/ts3367

  • HT4623 Iphone 4s auto lock is not working after updating ios6

    my Iphone 4s auto lock is not working after updating ios6 i restore 3 times but still geting problem

    Hello, Chirag25.  
    Thank you for visiting Apple Support Communities.  
    I understand that you are having an issue with the back camera.  Here is a troubleshooting article that I would recommend going through.  If none of the troubleshooting steps resolve the issue, see step 4.  
    Get help with the camera on your iPhone, iPad, or iPod touch
    http://support.apple.com/en-us/HT203040
    Cheers, 
    Jason H. 

  • Anyone else's iPhone 4s speaker not working after update to iOS 6.1?

    My speaker does not work after updating the software to iOS 6.1. No sound for incoming calls or texts, no speakerphone, no siri, no music or any sounds played from apps. Headphones still work as does anything plugged into the headphone jack. I've check all my settings - everything is correct. I've rebooted and restored settings several times, I've docked it - nothing works.
    Anyone else having this problem? Did anyone have this problem and were able to fix it? Does anyone know if Apple is aware and will be sending another update to fix it? I really don't think it's a hardware problem. Phone is in immaculate condition and never dropped or spilled on.

    As stated...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere

  • Iphone 4s Cellular data not working after updating to ios 6.0 .

    How to fix my cellular data, is not working after updating to IOS 6.0 ?

    Hey my wifi quit about a month ago,  and im running 5.1.1.  I thought the fix would be to download 6.0,  I guess not
    I have a 4s, first it was charging problems now this...argh!

Maybe you are looking for

  • Visual Composer 7.0 roadmap

    Hello experts, We have NetWeaver EP 7.0 installed with Visual Composer in our C&B and DEV environment. We haven't started developing with it yet. My questions to you is: What is the future of Visual Composer 7.0? My understanding is that SAP has put

  • Macbook built in iSight "not plugged in"

    Since day 3 I've had this problem with my macbook. Whenever I open Photo Booth I get a message saying that something else is using the camera or that its not plugged in. Quicktime says "No Video Input Detected". Ideas?

  • Pages 2 application problems

    Good day, I was hoping one of you may be able to help out with a problem I have been having. I have had this Intel-based machine for about a month now. The other day, I attempted to run Pages 2 for the first time. Each time I run the application, it

  • Auto increment pseudo column

    Hi, If I have a sql statement like "select e.name from employees e", how can i add a pesudo column which is auto incremented for each row fetched? So something like incr_column name 1 Jack 2 Michael 3 Freud Thank you

  • Empty iTunes playlists

    Most, but not all, of my playlists are empty as I try to access them from my work computer, which is synced via iTunes Match. Playlists that contain tracks have an iCloud icon next to them with a download icon in the center of the cloud.  The empty p