Ich habe eine Airport Extreme durch eine Time Capsule ersetzt. Kann ich die Extreme als Repeater verwenden?

Ich habe alles probiert und den Eindruck, dass die Verbindung nicht besser sondern schlechter wird. Wie muss die Extreme konfiguriert werden um die Reichweite des Netzes zu erweitern.

Wenn Ihre beiden Flughäfen 802.11n-Modelle sind, überprüfen Sie bitte diesem Apple Support-Artikel sicher sein, dass Sie dieerweiterten Netzwerk richtig konfiguriert haben.

Similar Messages

Ich habe meine Antworten zu den Sicherheitsfragen vergessen. Wie kann ich die zurücksetzen?

Kann mir jemand helfen?

Werfen Sie einen Blick auf diese Apple-Dokument ->
Die E-Mail-Adresse zur Wiederherstellung und das Zurücksetzen der Sicherheitsfragen für Ihre Apple-ID

Hallo zusammen! Ich habe schon seit einiger Zeit ein Problem mit meiner Airportkarte!

Hallo zusammen! Ich habe schon seit einiger Zeit ein Problem mit meiner Airportkarte!
Kurz zu meinem Problem: Ich kaufte mein MacBook Pro 15" (2011) vor zwei Jahren. Nach der ersten Installation zeigte es mir, dass keine Airport-Karte installiert sei. Ich dachte mir das lässt sich durch eine Neu -Installation von Snow Leopard richten! Das war auch so! Vorerst! Denn nach ca. einem halben Jahr gebrauch kam die Meldung wieder! Zuerst liess sich das Problem durch 2, 3 Neustarts beheben, wurde aber immer schlimmer, respektive kam immer öfters vor! Da ich zum Glück noch Garantie hatte, liess ich die Airport- Karte auswechseln.
Diese funktionierte dann einwandfrei bis, wie könnte es anders sein, meine Garantie ablief! Fortan kamen die gleichen Probleme, also "Kein Netzwerk ausgewählt" und/oder "keine Airport -Karte installiert "! Auch im Sytemprofiler fehlt sie dann! Bluetooth funktioniert immer (ist ja die selbe Karte, oder?)
Ich habe schon mehrere Dinge versucht:
- VRam löschen
- SMC Speicher löschen
- und weitere
Meistens hat's nichts gebracht oder nur kurzfristig! Nach nicht übertriebenen 20 Neustarts läuft die Karte wieder!
Es kann doch nicht sein, dass ich den Computer 20 Mal neustarten muss, wenn ich diverse Webseiten, Programme oder Dokumente geöffnet habe!
Was würdet ihr machen? Geld für ein neues Macbook habe ich nicht gerade übrig!
Zu den Daten:
SnowLeopard 10.6.8
2.2GHz Inter Core 7i
8GB 133 MHz DDR3 (2x 4GB)
AMD Radeon HD 6750M 1GB
Intel HD Graphics 3000 512 MB

Falls Sie nicht wissen, ist ein Mavericks v10.9 5.35GB Datei und requries ein Hochgeschwindigkeits-Breitband-Internet-Verbindung.
Langsamer Download-Geschwindigkeiten werden in der Datei abbricht, bevor es zu beenden führen kann.
Stellen Sie sicher, dass Ihr Mac kann Mavericks laufen > OS X Mavericks: System Requirements

Ich habe zwei iPod touch auf einer Apple-ID. Ich möchte nun jedem iPod eine eigene ID geben. Wie kann ich diese nun trennen?

Ich habe zwei iPod touch auf einer Apple-ID. Ich möchte nun jedem iPod eine eigene ID geben. Wie kann ich diese nun trennen?

Google translate:
have two iPod touch on an Apple ID. I would now like to give every iPod a unique ID. How can I separate them now? have two iPod touch on an Apple ID. I would now like to give every iPod a unique ID. How can I separate them now?
Change the ID on those devices. The ID is used for
Settings>Messages>Send and Receive
Settings>FaceTime
Settings>GameCenter
Settings>iCloud
Settings>iTunes
Note:
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

Ich habe Photosphop Elemenst 10 gegen Photoshop Elements 13 ersetzt - problemlose Installation - beim ersten projekt (AVCHD 1920x1ß8ßi) wird ein fehlerfreier Videostream erstellt, aber die in der Vorschau völlig einwandfreie Audiowiedergabe ruckelt und st

@@Ich habe Photosphop Elemenst 10 gegen Photoshop Elements 13 ersetzt - problemlose Installation - beim ersten projekt (AVCHD 1920x1ß8ßi) wird ein fehlerfreier Viseostream erstellt, aber die in der Vorschau völlig einwandfreie Audiowiedergabe ruckelt und stottert unerträglich. Ich habe alles gemacht wie bei Elements 10 und habe zischenzeitlich auch keine andere Hard- oder Software installiert. Die Wiedrgabe ist unbrauchbar ! Das ist bei einem neuen Produkt eine ziemliche Katastrophe, wenn das beim alten Elements 10 problemlos funktionierte ... Wer weiß Hilfe oder wer hat eine zusätzliche Idee !

ggoerg
Apparently you have Premiere Elements 13, have imported an AVCHD 1920 x 1080i (presumed 25) file into the project, and have found audio problem in the playback of that Timeline content in the Edit area monitor. Is that correct? Please confirm that what you have described relates to the Premiere Elements 13 Editor and not the Elements Organizer 13.
What is the brand/model/settings for the camera that recorded the video? What is the file extension? What are you (manually) or the project (automatically) setting as the project preset? (Please see Edit Menu/Project Settings/General for readings Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio, even if the look grayed out.) When you do the playback of that Timeline content in the Edit area monitor, is there an orange line above that content?
Are you using a pen and tablet device or a mouse?
Please do a mini test where you export this Timeline content to file and then determine if there are audio issues in the export as well as in the preview in the Edit area of the project.
Let us start here and then we can decide what next.
Thank you.
ATR

Hallo, ich habe für meinen Vater ein iPad 2 gekauft, er hat bereits ein iPhone. Was muss ich bei der Einrichtung des iPads beachten, damit sich beide Geräte verstehen. Die iCloud möchte ich auch aktivieren. Muss ich bezüglich apple id etwas beachten?

Hallo, ich habe für meinen Vater ein iPad 2 gekauft, er hat bereits ein iPhone. Was muss ich bei der Einrichtung des iPads beachten, damit sich beide Geräte verstehen. Die iCloud möchte ich auch aktivieren. Muss ich bezüglich apple id etwas beachten?

Ich habe das gleiche problem....ich hoffe auf eine schnelle loesung...

Internet - AirPort Extreme (b/g) - Time Capsule - File Server

I've got a small office network where files are served off a Mac mini, and iMacs connected via 802.11n wifi to the wired mini via Time Capsule. I have a spare AEBS (b/g) that I was thinking of setting it up for iPhone and guest access of internet. To keep the mini and iMacs secure, the set-up would be:
Internet -> AirPort Extreme (b/g) -> Time Capsule -> Mac mini and iMacs
The only issue I'm contemplating - the slower Ethernet ports on the Extreme - which I don't think is a problem for connecting to the Internet. Is there anything else I should be concerned about regarding network performance?
Thanks in advance for the collective wisdom!
Message was edited by: openarchitecture

That would work. The Ethernet ports on the AirPort Extreme base station (AEBS) is faster than your internet connection so you shouldn't have a problem.

Using an Airport Extreme and a Time Capsule at the same time

Guys I have had an Airport Extreme and a Time Capsule running together for nearly a year now and over the last few days the TC has been behaving badly. I changed its settings and now I'm in a mess. No, I can't remember the previous settings
Does anyone have a definitive list of the settings I need please? I have an ethernet cable modem, and the Airport Extreme is plugged into that as the main router. Two computers and the Time Capsule are plugged into the Airport Extreme using ethernet. The Time Capsule at the moment is just used as a network drive for Time Machine, but at some point I want to move it, with a long ethernet cable, and use it for extending the wifi in the house.
1. Should I connect the TC using its WAN port or one of the other ethernet ports? At present it's one of the other ones.
2. What TC settings should I use to have it function purely as a hard drive? At the moment there's some kind of conflict and my internet connection drops every 30 minutes.
3. Then later, what settings will I need to get the ethernet connected TC to extend the range of my wifi?
I read the Apple doc about WDS and tried setting the TC up that way. Then I discovered there is no WDS option in the AE Wireless settings. Only "Create a wireless network" or "extend a wireless network". The same setting on the TC has these options: "Create a wireless network" "Participate in a WDS network" or "extend a wireless network". Both devices have firmware 7.5.2. It didn't work with only the TC set for WDS, of course, but after that I can't get it back the way it was - which wasn't reliable anyway
Any help in exactly what the Wireless and Internet settings should be would be massively useful. Thanks!

If you use the extreme as a router then the tc should be connected via its wan port to one of the lan ports on the extreme. Tc should be set up in bridge mode. Basically you could set it up to create another wireless network beside the one created by the extreme. There is no need to use WDS or extend the other network.
Use the same SSID and password for both machines. Computers will connect to the strongest signal.

New Airport Extreme with old Time Capsule?

I just bought a new 802.11ac Airport Extreme to increase the speed and range of my home network. My network currently runs on an 802.11g Time Capsule. I would like to continue to back up to the old Time Capsule. Should I just set up the old Time Capsule with wireless off in bridge mode or should I place the Time Capsule somewhere else in the house strategically, leaving wireless on, to improve range? Someone told me adding a G-speed access point or client to the network would slow things down.
Thank you SO much for the help; I'm sort of a wireless networking dummie.
Steve

My network currently runs on an 802.11g Time Capsule.
I assume you meant to say 802.11n Time Capsule. There are no 802.11g models.
I would like to continue to back up to the old Time Capsule. Should I just set up the old Time Capsule with wireless off in bridge mode or should I place the Time Capsule somewhere else in the house strategically, leaving wireless on, to improve range?
You can do either. If you hare happy with the coverage of the 802.11ac AirPort Extreme, then I would recommend that you go with your first idea. I would connect the Time Capsule directly to the new Extreme using an Ethernet cable, disable its wireless and reconfigure it as a bridge.

Airport Extreme and a Time Capsule - config recommendations?

Hi!
So I find myself (in a fortunate position?!) with a new Airport Extreme and a Time Capsule.
I have very few requirements - I would like to be able to connect to the Internet wirelessly, and I'd like to be able to backup a couple of Macs using Time Machine (also wirelessly). I realise that the TC can provide me with that functionality nice and easily, but since I have an AE and a TC, I figure it would be good to make use of both, and so I wanted to ask if anyone had any recommendations for a useful configuration?
I think there are 2 basic options I could make use of (have I missed any?!):
1) Use AE as base station and connect the TC to it as an external HD
2) Use AE as base station and also make TC available for back up wirelessly
Does anyone have any thoughts on the above? If you'd recommend 2), what would be your suggested approach as I think I'm right in saying that 2) could be done in several ways? Roaming? WDS? Just setup TC as a stand-alone wireless box with no internet connection? (does this latter approach mean I could connect to the internet and backup at the same time - I'm guessing not?)
If 1) is the way to go, is it just a case of putting an ethernet cable between the 2 boxes?
Any thoughts would be hugely appreciated!
Many thanks

I would use the Time Capsule as the wireless base station connected to the modem. Then I'd use the Airport Extreme to extend the network or to create a roaming network (ethernet cable betwee the units), whichever worked best in the premises. Naturally, Time Capsule would be used for backups of all machines equipped with Time Machine. Have never hooked up any Apple equipment but from my understanding of it, this is what I'd try.

AirPort Extreme with 3T time capsule file security question

Right now I am using a MacMini with an external HD as a file server. I'm thinking g of using the new AirPort Extreme with 3T time capsule to do the same tho g (while also extended my wifi reach).
With the Mac mini I have fine control over who gets to see and do what to which folders and files. It seems that with the AirPort Extreme thee is no notion of permissions or access control -- if you can get on the wireless you can access the files. That is extremely insecure.
Is my understanding correct? Is there no way to secure files hosted on an AirPort Extreme so only certain users can access them??
- john

Are there any instructions for how to format and set HFS+ user permissions on the AP Extreme's HDD?
For the formatting part, you will need to temporarily connect the drive to your Mac, and then, use the Disk Utility (a part of the OS X operating system) to partition and format the drive. You should find this utility in the \Applications\Utilities folder. For HFS+, choose "Mac OS Extended (Journaled)" for the Format option.
For assigning user permissions using accounts, you will need to use the AirPort Utility.
Run the AirPort Utility
Select the Extreme, and then, click on Edit.
Select the Disks tab.
Select the HDD in the Partitions window.
Choose "With accounts" as the Secure Shared Disks option.
Click on the "+" button to add user accounts.
For each account desired, enter the Account Name, Password, and File Sharing Access type.
Click Save.
Click Update to write the new configuration information to the base station and wait for the station to restart.

If I have an airport extreme and a time capsule is it possible for seamless switching between the 2 when a signal is weak or drops Main reason is as I move from my first floor to my attic office and would like to place one (airport extreme)downstairs and

If I have an airport extreme and a time capsule is it possible for seamless switching between the 2 when a signal is weak or drops
Main reason is as I move from my first floor to my attic office and would like to place one (airport extreme)downstairs and time capsule upstairs to get complete coverage

In theory, yes. If you configure the two base station into either an extended or roaming network configuration, you should be able to walk a laptop between routers and the laptop should attempt to connect/reconnect to the base station providing the stronger signal ... but, in reality, this is not always 100% true.

What is the best way to hookup my airport extreme with my time capsule ?

what is the best way to hookup my airport extreme with my time capsule ?

It sounds like you have the AirPort Extreme configured as the "main" router on your network.
If that is the case, connect an Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the Time Capsule
Power up the Time Capsule
Connect another spare Ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule, then click Manual Setup
Click the Wireless tab below the row of icons and make sure that the setting for Wireless Mode = Off
Click the Internet icon, the click the Internet tab
Insure that the setting for Connect Using = Ethernet
Insure that the setting for Connection Sharing = Off (Bridge Mode)
Click the Update button at the lower right of the window and wait a full minute for the Time Capsule to restart
Then power cycle the entire network by powering everything off....order of power down does not matter
Wait a minute
Power up the modem first, and let it run a few minutes by itself
Power up the AirPort Extreme next and let it run a full minute
Power up the Time Capsule next and let it run a full minute
Keep starting devices one at a time about a minute apart until the entire network is back up
You will need to reset the backup path from your Mac to the Time Capsule to get backups going again
Open System Preference (gear icon on the dock)
Open Time Machine
Click Select Disk
Click the Time Capsule to highlight it
Click Use for Backups or Use Disk and backups should begin again in a few minutes
If you do not want to leave the Mac connected to the Time Capsule by Ethernet, remove the Ethernet cable from the Mac to the Time Capsule, then log on to the AirPort Extreme wireless network

Fehlermeldung : Das Programm wird aufgrund eines Problems nicht richtig ausgeführt . Das Programm wird geschlossen und Sie werden benachrichtigt , wenn eine Lösung verfügbar ist . Was kann ich jetzt tun ?

Fehlermeldung : Das Programm wird aufgrund eines Problems nicht richtig ausgeführt . Das Programm wird geschlossen und Sie werden benachrichtigt , wenn eine Lösung verfügbar ist .
Was kann ich jetzt tun ?

Unfortunately, I don't think that anyone on this forum can help[ you with a SONY product. Have you contacted SONY customer support?

Meine .avi datei weist eine nicht unterstützte Komprimierung auf. Wie kann ich sie dennoch importieren?

Meine .avi datei weist eine nicht unterstützte Komprimierung auf. Wie kann ich sie dennoch importieren? Eigentlich würde mir auch nur der Ton genügen für die Weiterbearbeitung. Wäre das einfacher. Ebenso besteht die datei noch als .mp4. Was premiere aber auch nicht akzeptiert. Danke für Tipps!

Duplicate message deleted... please only post a question once
AVI is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Beim Verbinden mit dem Server ist ein Fehler aufgetreten, Fehlermeldung bei der Anmeldung was kann ich tun?

Beim Verbinden mit dem Server ist ein Fehler aufgetreten, Fehlermeldung bei der Anmeldung was kann ich tun?
Wiederherstellung und Neustart hat nicht gebracht, eine Verbindung zu itunes und dem Internet besteht.
Danke
a.

It appears that your Library is corrupted in a very odd way that I've not seen before.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Ich habe eine Airport Extreme durch eine Time Capsule ersetzt. Kann ich die Extreme als Repeater verwenden?

Similar Messages

Maybe you are looking for