Ichat 2.1 can't see or hear ichat 3. Help!
I have looked at every option I can think of. I have a G4 using iChat 2.1. I added the line to open the ports up 5060, 5190, 5297, 5298, 5353, 5678, 16384-16403. I have a wireless router and cable modem. My sister has the new apple laptop mac bookpro with iChat AV 3.1.4.
We keep getting this message: There was a network timeout starting the conference.
Tried to send UDP SIP "invite" to the following IP addresses and ports:
xxx.xxx.x.xxx:5060, xxx.xxx.x.xxx:5060
My mac worked in the store and I was able to use my camera. and my sister was told that it was because of her wireless connection.
Powerbook G4 Mac OS X (10.3.9) IChat 2.1
OK here goes. I have a powerbook G4 and using ichat 2.1. I added the ports to my apple firewall. I also added it to my Linksys wireless G router model #WRT54G.
My sister has a Linksys wireless router ( not sure of what the model is) she has a new macbook running mac os 10.4.6 and ichat 3.
I was told to bring my mac and my sisters mac to the same apple store to make sure that it can communicate. We were both able to open a chat and to open a voice chat. They said to check the routers that we have.
I called Linksys and they ran me through how to open the ports up. My sister did the same. We tried and it still came up with errors when we tried to open a audio or video chat.
this is the message that I get
2006-05-18 10:06:34 -0400: There was a network timeout starting the conference.
Tried to send UDP SIP "invite" to the following IP addresses and ports:
xx.xxx.x.xxx:5060, xxx.xxx.x.xxx:5060
When my sister tries to send me a chat she gets that she didn't respond to the chat.
I hope that can help you solve this problem. Cause no one else can!
Similar Messages
-
I can't see and hear purchased movies on my macbook pro
I can't see and hear purchased movies on my MacMook Pro. I can see the chapters , but movie won't play…...
You purchased the movies from where? What application are you using to play the movies with?
-
Fire Wire: MBP OS X.4.11 Can't see external devices. PLEASE HELP!
Fire Wire: MBP OS X.4.11 Can't see external devices. PLEASE HELP!
My MBP will not "see" my new MB or my back-up drive—both connected via a firewire 400 (6 pin) cable. Both running Tiger X.4.11
I have used this cable to connect my MBP and a TiBook in the past as well as to back-up onto the LaCie e-drive.
I have run "disk repair" and "permissions" on both machines.
BTW—"permissions" are regularly out of wack on the MBP. But, the disk is OK according to Disk Utilities.
I also cannot put the machine to sleep after logging out. Has a hard time shutting down as well. Sometimes I need to force a re-boot.
Can't run Disk Doctor because I don't have a bootable disk yet. It's coming via snail mail.
The new MB "sees" the e-drive connected with the same cable.
I can't transfer my files to the new MB nor can I back up.
Is it time for a "clean install"? Makes me nervous that I cannot backup before trying anything drastic.
Can someone please help me?
Thanks in advance.
TekPut the more recalcitrant computer into Target Drive mode by starting it with the T key down until you see the yellow on blue screen. Then connect it to the other machine by firewire cable while both are already awake.
I hope that you did not do any upgrades while you had external drives connected... that is an automatic problem. Always disconnect from externals and accessories before doing any upgrades. Always back up before doing any upgrades.
Firewire networking is not the same as using a computer in Target Disc mode. In Target disc mode, you are using the internal drive of the Td computer as an external. That should allow you to run disk utility. Do use the proper disc utility version for the OSX version that is on problem drive. ie don't use the Leopard disc utility for the Tiger disc or vice versa. -
Whenever I log into Facebook and someone has sent me a video I get a green screen and I can't see the video. Please help.
You're welcome. And thank you for marking question as answered. To prevent it from happening again, go to Settings > General > Accessibility, turn off Zoom.
Stedman -
Connected w/ ichat, but can't see or hear other person
So me and my friend have been trying to get ichat working for days. I have a mac (just bought it...first mac), and he has a dell (new, also). We're connecting through aim because my .mac account won't let me sign on and my google one won't either. After I accept, or he accepts the invitation, it says that we are connected, but I can only see myself, and he can only see himself, and we can't hear each other. One time we connected we could hear each other but that's it. Please help!
Hi,
With newer versions of AIM for a PC there has been problems with AIM posting that AIM 6.5 will not Video to iChat.
http://www.aim.com/helpfaq/starting_out/getstarted.adp#608
AIM have yet to post any Support pages for AIM 6.8
Having said that some people do say they can get it to work.
The PC end certainly needs to to this though.
http://www.ralphjohns.co.uk/page12.html#_Service To allow the app through the Windows Firewall as an Exception.
It also pays to go to the AIM Preferences (in the Buddy List Menu Bar under Edit) and then to Enhanced IM and reselect the camera.
The sound input devices needs to selected and calibrated in the relevant Control Panel to be used by the AIM App. (if it is disconnected it has to be done again)
iChat to iChat will Video chat with a GoogleID as it invokes the A/V Protocols iChat uses.
GoogleTalk itself is a Jabber server and uses different audio Protocols (Jingle) and therefore will not connect to iChat even with a Google ID
An @Mac.com ID currently has to be added as an AIM type Screen Name and the whole name including the @Mac.com suffix typed in as well
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
10:31 PM Monday; August 11, 2008 -
i have a problem with my iphone 4s voiceover. when i activate it i only hear the voice comman bt can't see anything.
Plz...give me your best advice so i can correct my problem thank much.You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money.. -
Can i see and hear using Skype with ipad 2?
I want to buy an IPAD2, Will I be able to see and hear using Skype?
So basically, your asking if sype you work properly on your ipad, right?
http://itunes.apple.com/us/app/skype/id304878510?mt=8 -
Please help me...My 12year old daughter has been talking to a older teenager through the text free app. How can I see the conversations? Also, there is a photo vault that is locked. What is that? Please someone help me. I don't know what else to do. I paid and downloaded a program that is supposed to tell you everything that's on the ipod but that was a joke. Thanks for your help.
As long as you can't get a hold of the device, you can't do anything more than talking to your daughter about it.
Erasing the device could also be an option to keep her from using apps you don't want her to have on her device.
Try talking first -
Can't see volume bar! Please help...
Hi everyone,
I just got an ipod video and love it. However, today I cannot see the horizontal volume bar at the bottom of the screen when playing songs. Instead there are about five clear circles at the bottom. I can turn the volume up and down but I just can't SEE THAT.
If you could please suggest things I may try I would greatly appreciate your help. I hope I just messed up the settings or something and did not break it.
Thank you for your help in advance.Those 5 circles are the "ratings" circles. Mine has frozen on those before. I just hit the center button a couple times and it went back to the volume bar. In case you didn't know, when you're on the volume bar and you hit the middle button, you go to another type of bar that allows you to fastforward or rewind the song/video, you hit it again and you get the 5 circles that you can turn to stars by runnin your finger over the wheel. Like I said before, that is your rating....Hope any of that helped, lol.
~Kourtney~ -
I deleted hidden files on my bb curve 9320 now can't see some pics n vids help ??
I deleted some hidden files (yes I no naughty ! But something was munching my memory), I now can't see certain picture's and video's, Is there way I can fix this ?! As they are of my son :'(, I think I might of deleted a media loader but can't be sure I have 1 left in my device folder if this helps, would be greatful for any advice
Hi and Welcome to the Community!
You can try to do a full back up of your device using the BlackBerry Desktop Software including Building Media Storage if the option is there in order to see if that transfer that information to your computer to be able to save it there.
You can also try to synch your pictures & Videos using the BlackBerry Desktops Software to your computer.
You can try to take out the Battery wait then put back in & try to see the pictures or videos if there are on the device & was not deleted.
Please Advise
If it helped you, click like.
If my response has helped you, please click "Options" beside my post and mark it as solved.
Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.
Good luck and let us know! -
I can not see or hear the "YouTube"
My lap top has its own speakers. The "you tube" was working fine; but when I used my skype I could hear theother people but they couldn't hear me that is why I connected to the computer the outside speakers.
Do you think, this could have caused this?Whether you can see and download textbooks depends upon where your iTunes account is based - as far as I know they are currently only available to US accounts
-
I am running an iMac 24" with Lion. FaceTime is received with both sound and picture. Another iMac running SL can see but cannot hear me. Any ideas?
if you use some case or screen protector check up on where the mics on the iphone are and that your case / screenprotector and or fingers are not blocking them
-
Anyone who can expalin me how i can connect her non iphone (it lights up as she is very deaf like a chritmas tree so no i cant give he an iphone before anyone suggests) so i can get here to text via imessage on the ipad please.
I was hoping some tech wiz would have found an answer for you. The app below vibrates and flashes. Is that the kind of thing you're looking for? I'm not sure, because I am thinking you want your Mom's phone to somehow connect with ipad.
If you read the link I previously posted, please read the comments also. Maybe a suggestion in one of those would help.
http://appadvice.com/applists/show/apps-for-the-deaf
More App Info
description &
screenshots
$2.99Tap Tapby David Vondracek
One of the dangers of hearing loss is the inability to hear audible alerts or warnings. Tap Tap is a brilliant app that allows those with hearing loss to react to sounds. When it detects noise, the app will vibrate and flash to alert the user. If the door knocks, or someone is speaking or shouting, the user will know. If the smoke alarm goes off, Tap Tap will vibrate and flash. The sensitivity can be adjusted and the app can run in the background if desired, though this may use more battery power. This is a must-have app for anyone with significant hearing loss. -
Serial number can't see on product box/sleeve - help?
Hi Grateful for help
Purchased product from Amazon box- Adobe elements 13 and elements 13
I cannot see anywhere redemption code or serial number that fits the 24 digits
I have on the sleeve an 8 digit number starting with 8 underneath is block of mainly letters that start with PEPE but don't fit
This is the second set Amazon has sent me- totally confused
With the booket it says serial number starts with 1057?
Hope someone can help. I have spent ages with Adobe earlier this week who asked me to go to different sites and provide proof of purchase ( which I did)
I was really hoping to get started on this
thank you
RobSorry it was Photoshop and premier elements 13 and a 8 digit number starting with 9
Rob -
My friend just bought a Windows 8 laptop so I told her to download the latest version of FireFox. Unfortunately, some idiot removed the Menu Bar which most people love. You can see all of your options in plain English. Anyway, I referred her to help and cannot believe it's so hard to get a simple answer to this question. Why does FireFox make it so difficult to get an old fashioned menu bar?
Help says, "Right-click on an empty section of the Tab Strip and check Menu Bar". OK, what is a "TAB STRIP" and where does she find it? Who writes these silly, useless help tips?Grad, you made some good points but we still disagree. I'll acknowledge that maybe millions was a slight exaggeration but nobody has an accurate count. However, I do understand the difference between making something simple and obvious versus a programmer trying to prove how clever he or she is.
Grad, I'm guessing you and your friends are much younger than us as we are well above the age of 50.
As for the number of clicks, I'm confused by your comment. My Menu Bar is always visible so I have to merely '''click once on Bookmarks''' to get to those menu options. It sounds as if you have to initially click on the orange FireFox button in order to see the Menu Bar, and then click a 2nd time on Bookmarks. That sounds like 2 clicks of the mouse to me.
I have Windows 7 and never saw Windows 8 so I can't comment on your excellent question. I personally had the '''Menu Bar displaying 100% of the time''' for as long as I could remember. I just couldn't remember how I initially turned it on several years ago and the help file proved to be more confusing than helpful.
Maybe you are looking for
-
How to get the name of the selected user in Active Directory.
Hi, I have added an vbs script to the Active Directory GUI, to do some actions on a selected user. When I right-click on a AD user, I choose my custom option, and a vbs script starts. So far so good, but in the script i would like to know the account
-
Sender File Adapter-Content conversion for a tab delimited file
Hi all, I have a FIle to IDoc scenario, where the File is with the structure Header,Detail,Trailer. Header and Trailer are with fixed field lengths, whereas the detail records are tab delimited.(Functional spec says delimited by H'05'). I have given
-
Reading and Updating MS Active Directory (AD) through Oracle APEX
Hi All, Has anyone ever read and update the AD components using Oracle APEX? I know we can have APEX build in LDAP Authentication, but that is for the Authentication, what about reading other attributes like phone no., department, office etc. from MS
-
BCS - Bringing "Created at/by" and "Modified at/by" to life
Hi, in the standard forms you get from BCS the "created at/by" and "modified at/by" fields are visible but completely empty. My assumption is that there must be an easy way how to use them, otherwise they won't appear here. So what do I have to do to
-
Report Permissions -- Run existing reports but cannot read/create report
Hey everyone, Hopefully this is a simple question. I'm trying to create a user in the RPD which has permission to run all the existing reports in a Shared folder and is able to change the filter criteria on those existing reports, however, the user c