IChat 4.0 shows up with no buddies and error message
I can see the AIM buddy list through ichat 4.0 and it says "available" but then shows all my buddies offline when that is incorrect. after a while it gives an error message saying i have tried logging in too many times and to try again later. please help!!!
Hi
Try logging on to AIM on port 443 rather than port 5190.
Go to IChat in the menu bar > Preferences > Accounts.
Log out of AIM and then use the Server Settings tab
Set the port to 443.
Log back in again.
Tony
Similar Messages
-
Numerous problems with X1 platform and error message RDK-03032
Daily I have problem with the X1 system where the TV signal goes out and I get a message that says " Call 1-800-XFINITY and reference RDK-03032." This problem is randum and can occur at any time of day, resulting in outages for many hours, or usually the remainder of the day. If I call Comcast customer service, usually the wait is usually about 20 minutes before someone comes on and goes through another process of sending signals to my box, at which time they say they need to send a technician out. I then get a call from the technician who says he doesn't need to come out because the problem is with XFINITY's network, and that they are working on it. If I call back into customer service, I need to first make sure I have about an hour for the process because the customer support person has to go through the same diagnostic test of sending signals to confirm the system is down, before they will refer the problem back to a technician in the field. Usually during this diagnostic process, the technician puts me on hold for another 30 minutes, at which time the phone is hung up, at which time I have to start the process all over again. RDK-03032 problem continues to occur with no resolution and no one seems to be able to tell me what the problem is, or how to fix it, and no one in customer support knows how to fix this problem. I have no idea how to get this problem resolved. Does anyone have any idea?
awsomely sad / they put this item on the market and i would recomemmend you contact the fcc for a form to fill out a complaint asap as i will be doing as soon as i receive the letter in the mail , they say it is a latency problem . late is late but no show at all for hours on end is the new future. what is that suppossed to keep us victoms happy untill they can figure out what to do to cover theyre mistakes , now they are trying to replace the incoming signal which has left me with no services 10 times in 14 days , i watched a tech install a new cable from pole to house with 2 supervisors standing rigth there , when the 12th visit by a tech i explained my story and the tech said let me look out side 1 hour later after my services were cut off again the tech came to my door and told me the cable from my house to the pole was terrible and rotten and needed to be replaced again , i knew he was lying but it was after 7 pm and i had enough , i saw them a week or so before , as did the 2 supervisors , cut a brand new peice of the roll in his truck replace it with new ends , a totally new peice , so i guess the cable they are using only has a 2 week life expectancy or the tech was lying , which i beleive the tech wanted to get paid for the call , so he probably did but once again my xi service is not right still , when they get to far in they start lying because they are probably getting screwed for have to service this x1 numerous times , when i sit here and listen to the supervisors and techs tell me that the system is the problem and they are trying every 3 months to figure what the last program upgrade has screwed up for them and laugh jokingly it doesent give you to much faith in theyre ability to resolve any issues with this system face it we have no recoarse . over 200 hrs on the phone . i must have talked to every employee in the company even tom karinshank yhe ceo was contacted and after his rep sat there and picked appart evry thing i said got rude and now wont return my calls or emails they pass it to the next person , ????????????????????????????????????
-
Problem with file opening and error message
Hi there,
In CP 7, I am having a problem opening a file adn was wondering if anyone else has had this and whether the file was recoverd effectively or at all...
See message below
Cheers
RossdoAre you trying to open a CP8 file in CP7? If you are facing the problem with CP7 file itself, first thing you need to do is check whether you got any .lck file (lock file) in the source file folder, which indicates that the file was opened and not closed properly.
If not, try the method here:
Recovering the project « Rapid eLearning | Adobe Captivate Blog
Sreekanth -
Capture Problem with "escape" command and error message
Just got my Final Cut Express this week and I'm already having weird dreams about editing... I'm logging about 5 to 7 hours per night trying to figure it all out.
Anyway, my most pressing issue is that while I am in the "capture" window and I rewind my tape (a Panasonic PV-GS320) (also, running this on my macbook pro with system 10.5.2 just loaded) - I press "now" because that seems to be the easiest to start with and when I try to stop and press "escape" it won't stop. So I tried pressing option/esc and it stops but I get the following message: " The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape. This may cause the video and audio of these media files to be out of sync. Make sure the audio sample rate of your capture preset matches the sample rate of your tape.
I have some ideas but I wanted to get started working out this issue. Thanks for any help with this all you FXC gurus out there.I recorded this in dv widescreen which imports fine in imovie. I am importing in DV NTSC 48Hz. I've tried all the settings. I know I have to probably just find the right mix of settings. I've tried changing the settings in the camera to 4:3 and back to 16:9 but I guess if you record in widescreen, you are stuck with that format. But this is actually a DV not an HDV camera
-
Help Needed With Scripting and Error Messages
I am working to build a script to change orders in SAP using Java. I begun by recording steps and combining them. I am having issues with the Warning and Error Messages. Can someone help me write language to have the script enter through the warnings or errors if they pop up, but move to the next step if nothing pops up?? Some orders have the message, some do not, some have multiples... etc...
Thanks!!Hello Jamie.
Getting popup you can use an Loop like below (this is now for Excel VBA coded):
For Each subWindow In Session.Children
If subWindow.Name = "wnd[1]" Then
On Error Resume Next
Session.FindById("wnd[1]").sendVKey 0
Session.FindById("wnd[1]/usr/btnANSWER_YES").press
Session.FindById("wnd[1]/usr/btnSPOP-OPTION2").press
End If
Next
For Messages in SAP session statusbar like this:
If Session.FindById("wnd[0]/sbar").Text <> "" Then ...
To catch error Messages defined by messagetype you can use this:
If Session.FindById("wnd[0]/sbar").messagetype = "S" Then ... 'sucess messagetype
If Session.FindById("wnd[0]/sbar").messagetype = "I" Then ... 'Information messagetype
If Session.FindById("wnd[0]/sbar").messagetype = "E" Then ... 'Error messagetype
Aso...like we have in SAP
Hope this help a bit to achieve your requirements.
Best regards,
Holger -
USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?
OS X installers have always been fairly specific, hardware-wise. I haven't read anything reflecting that situation with the Recovery HD, so it may be that the Recovery HD created for the MacBook Pro does not have the necessary drivers for the Mac Pro. Obviously, nothing definitive here, but a possibility.
-
Suddenly my Nikon Coolpix will not upload on to my 09 iphoto it takes for ever then it just shows blank squares no pics and a message that states it cannot read the JPEG files. Can anyone help me, please. I have never had this problem before.
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
You could also try reformat the Card with your camera
Regards
TD -
I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions. HELP PLEASE!
yeah i plugged in my iphone to my computer and itunes does not even notice that i plugged it in.
-
I have design standard with creative cloud, I have installed this on 2 computers, my office and home which I was told was allowed, I have just tried to open an indesign file from the office at home and and error message said that this was created with a newer version? they are the same versions and both are up to date, I was asked this morning to put in my adobe id email and password to connect to CC which I have never been asked to do before, can anyone help?
what's your home version (click help>about) and was that just a warning so you were able to open the file?
-
Images with success and error messages
Hi,
I am using theme 20. I want to add a success image on all success messages and an error image on all validation failure messages. I can do this by putting img tag in messages individually. Is there an easy way by which I can make sure that all success and error messages are always displayed with a corresponding image without including img tag in every message?
Thanks,
BhaveshHi Bhavesh,
in page template there is Subtemplate region related to success, error and notification messages. You can put there your HTML tags and add some css class or image for every page using this template.
Regards,
Przemek -
Putting a row into a pageable cache failed with error 9 and error message
Hi Guys,
I am fetting the follwoing message when the job is scheduled.
Putting a row into a pageable cache failed with error <9> and error message <Db::put: Bad file descriptor>
I read the forum and Manoj has suggested to one of the forum member to change the size of the Pcache setting through the server manager. But I do not see the setting there. can any one please let me know where exactly I can see and increase the size of the Pcache.
ThanksHi
I've had the same problem. We know from other (more meaingful) error messages that we ran out of space for the Pageable Cache, but we've just increased it by 50GB and still get the same error.
Anyone??
Btw i don't think you there is a setting for PCache size - it will just use all the free disk you have on the drive where you have located the PCache directory.
Richard -
Trying to sync an old iPhone to iTunes and error message in iTunes appears: "We are sorry, we are unable to continue with your activation at this time" so unable to sync.
How long has this been going on?
If more than 48 hours, then try a different computer. -
can't reload Photoshop elements 7 on my windows 7 operating system. Everything goes well and it appears to be installing. All of the sudden the Installer starts to roll back everything and error message shows up saying I can't use this product at this time.
How do I do that? I'm the only user on the laptop - I kind of assumed I already was running the install as the admin.
-
In pages it shows and error message when I try to share a document
I get and error message when I try to use Share in sharing a document in pages and cannot email any documents
OK, I tried a few things, and I do not understand the results.
1) I opened the document in Preview, and it would only recognize the three initial pages which I typed using the Pages App. It did not recognize the bulk of the text which I copied from Appleworks 6. It also did not recognize any of the scans.
2) I tried opening a pdf in Preview, and it would only recognize the scans. (No Text!)
3) I tried copying everything (select all, and command-c) in Pages, and then opened a blank Pages doc, and typed Command-v. This got me all of the text, but none of the scans!
4) I was worried that my Pages app might be corrupted, but I successfully converted a similar 78-page document with copied materials from Appleworks 6 and similar scans, ant this worked perfectly.
My conclusion is that my file must be corrupted. Is there any way to check this? shabda88 -
Hello,My ipad version is 4.2.1 and try to update to version5.3.5 but failed. it showe can't to update and error code "3194". How can I do?
See this page http://support.apple.com/kb/TS3694#error3194
Maybe you are looking for
-
2. what is the diff b/w SAP LUW and DB LUW?
-
Why are Panasonic GX7 RAW photos not visible in Aperture but in OS X Mavericks and iPhoto?
My Panasonic GX7 RAW photos seem to be visible in OS X Mavericks and iPhoto, but bizarrely not in Aperture (3.5.1). Does anyone know why this would be? Any solution greatly appreciated. I've been unable to mange a significant number of images for alm
-
Image Upload probelm - Very Urgent. Pls help!!!
Hi All, I am facing very strange problem while uploading a image file (.JPG file) thru a web dynpro view. I am accepting a image file from view and uploading it to a ftp server. There are two abnormal results I have observed. It does NOT happen for e
-
How to use array as parameter in procedure
Hello, I am using Oracle SQL Developer 1.5.5 I wanted to write a procedure which does insert into table. It should take 2 parameters.How to take array as parameter? One is a array of strings ('abc','def','erg') and another is a varchar ('abc'). How t
-
How can you tell how much hard drive disk memory is available?
How do you check to see how much hard drive memory you have left?