IChat and how the camera image looks
the image is not very clear, and i also saw in the website that iChat should show a black table like surface where the images have the effect of being reflected on.
does anyone know what should i do for those 2 things.
my ilumination is good, so that shouldnt be a problem.
thanks
The deployement is to "All systems" collections.
If I deploy on a new computer : it's works.
If I redeploy on this same computer with another name: it's works.
If a try again on this computer : no task sequence available.
To resume:
Step 1: Use OSD on one computer
Step 2: Use OSD a second time on the same computer with another names (works)
Step 3: Use OSD again on the same computer (third time) and see no task sequence available.
Task sequence deploy to All system...
So to works, I need to delete computer in SCCM.
There must be something wrong then. The client should still be member of 'All Systems' after being reinstalled. Fix that and you're all set.
Torsten Meringer | http://www.mssccmfaq.de
Similar Messages
-
Moving and Tilting the Camera for an optimum Lens Profile Creator image set
When framing the chart in different areas of the image frame, use a combination of physically moving and tilting the camera to achieve an optimal balance for LCP generation.
The following two passages are from the AdobeLensProfileCreatorCalibrationChartShhtingGuide.pdf
Page11/a -Move camera a bit to the left (so that when turning to the right to face the chart, it is about 10 to 30 degrees). Take a series of shots similar to the first three, above, except that the chart is framed at the center-left, top-left, and bottom-left areas of the image.
v. Move camera to the right, and do the same for the center-right, top-right, and bottom-right areas of the image
pg11/e - When framing the chart in different areas of the image frame, use a combination of physically moving and tilting the camera to achieve an optimal balance for LCP generation.
i. Only moving the camera to frame, so that image plane stays perfectly parallel to the chart, can have an adverse affect on LCP calibration data.
ii. Only tilting the chart may cause depth-of-field issues, where part of the chart may go too far out of focus due to the large angle of the chart in regards to the image plane. This can also have an adverse affect on LCP calibration data.
Does this mean to center the camera with the center/center shot so that the film plane is parallel with the calibration grid, then only use camera tilt on the tripod up and down for the top center an bottom center image. Then move the camera/tripod left (so that when turning to the right to face the chart, it is about 10 to 30 degrees) AND also pan the camera left to shoot the left top center and bottom image.
I think this combination of instructions have me stuck. Move left but not so much that the calibration target image is parallel with the film plane then pan the camera to get the desired framing.
Would I be correct to say - move left until the angel to the calibration image is 10-30 degrees and then use camera pan on the tripod to get the image framed properly. ... Is the desire to move as little as possible, or pan as little as possible, or to balance moving and panning in some way.
I am profiling a Nikon D7000/TAMRON 11-18mm F/4.5-5.6 lens and have a large target 36"x48" and read that I should shoot at minimum focus distance, 3x minimum, and 5x minimum which equates to 9.8 inches, 29.4 inches and 49 inches... I use this combo to shoot home interior shots at an focal distance of more like 10-20 feet from surrounding walls.. would I also need shots at (120 inches?) 10 feet?
I really (really) want to get the distance to subject and camera moving/pan combination right.
Please help.There are a number of things darks/flats/bias can't remove: curvature, coma, pincushion, chromatic aberration. Some of those (pincushion i.e. showing stars on the chip in a slightly different position from their true position) may or may not be correctable with this sort of an app. It's possible using outside data (comparing the star locations in the image to their true locations in a catalog - that's a common astrophotography measurement and only takes seconds). Correcting curvature (differing focus off axis) chromatic aberration and coma (distorted star shape off axis) seem just what this app is about.
Printing a checkerboard on a nearby hill top sounds involved. Maybe I could get them to plough it in a regular pattern? :-)
The camera does not capture the data you mention. The images are usually in FITS format which has an enormous amount of data about the focal length, exposure time, amount of atmosphere through which you are looking, etc.
Calculating from the book value for the lens(es) camera chip etc would likely not be give a better result than the value obtained before correction. In some designs of scopes, particularly the most common ones, the focal length changes as you focus for example. The lenses and mirrors, comparing one scope to the next, are not perfectly identical.
But a dense star field would be something against which you could measure changes in star shape, focus, chromatic aberration and possibly even position. Once you figured out the parameters for your particular scope+corrector lenses+camera setup you could then use that profile thereafter.
I'd love to chat with that engineer I had heard you have one person who got a Meade SCT and started astroimaging just to learn the things we need and most astroimagers do use photoshop.
Drew S. -
How to open and validate the tif images via java?
Is it possible to open and validating the photoshop images via java. Kindly advise me.
Thanks for looking into this.
Maria PrabudassI have recently looked at athe code for Image Processor.
To avoid bailing on errors it uses two techniques.
1) It turns off all PS error reporting in addition to just turning off dialogs with: app.displayDialogs = DialogModes.NO; (it restores the original settings when exiting)
2) It uses the Javascript construct Try.....Catch around the basic body of the code so "any" error will not abort the script but just jump to the "Catch" code.
Hope that is useful -
I just updated the software on my iphone 4 and prior to updating I could double click and start the camera without logging in, now I can't. How do I fix?
Nothing to fix...things have changed...slide the camera icon up now..no more double tap.
-
How can I synchronize my iPhoto events? my iTunes doesn't read them and with the app Images in the iPad I can only find Photos, Albums, Faces and Places, not Events.
I had a problem a couple of months ago when iPhotos suddenly rearranged the order of my Events (Why won't iPhoto let me arrange my photos?) . I was told "Use albums not events - events are not a good way to organize - albums and folder are designed for organisation and are very flexible".
Haha! I should have paid attention and read between the lines! My iPhotos were highly organised groupings - not according to date but the way I wanted them - and it was so easy to do! I see now that if I had them all in albums, as per the Apple Apologist suggestion, I wouldn't have this unholy mess I have been left with just to make iPhone & iCloud users happy. I am now going through Photos and making Albums (of what used to be in my Events) ... maybe I'll get this finished before they do another non user friendly update! -
I just bought an Epson Stylus Pro 3880 and the printed images look yellow. I calibrate my MacBook Pro monitor with a ColorMunki Display. I want to make sure my Lightroom print settings are correct.
This what I have been trying...... Maybe my eyes are screwed up or don't understand the process....
What I have been trying to do is squint and make the apple disappear by moving the sliders around in each step. Is that correct? -
I’ve got a new MacBookair11 2weeks ago and I am very happy with it. Today I’ve tried to synchronize it via icloud with my ipad and I have lost the camera.
Looking through help in internet I found out that I had to reset the SMC. I did exactly as per instructions given but with no luck.
Is there any other solutions that will fix my camera for facetime and iphoto?
Thanks for your helpMacBook Air (Mid 2013): FaceTime HD Camera might not work after OS X 10.8.5 update:
"Apple is investigating this issue." -
Why are some jpg images scrambled when they appear in my screen saver? The same images look fine in Preview and Finder. Some images appear scrambled in the screen saver 'preview' window and the actual screen saver. Other jpg images look fine.
The desktop image is fine, taken from the exact same pool of jpg photos. However, as soon as the slide show screen saver comes on, the images are scrambled. What is it about the apple screen saver algorithm that scrambles the pics?
-
I bought my iPhone5 4 months ago and now the camera is not working, it only displays black in the screen. I've tried reset, restore for how many times but still the problem is not being resolve. Any help from you Apple team?
There is no Apple here, this is a user to user forum. When you said you restored, then you restore as NEW?
If you restored as New and still the problem persiist, then it time to take a trip to the Apple store. -
I find that after updating my ipad to ios8 banking applications to deposit funds no longer work. The camera image rotates from horizontal to vertical and cannot be corrected. Is this a new ios8 error. I tried two different bank applications for ipad.
Hi, Thanks for that further bug description In Your Last Message That Describes The Problem I Am Having perfectly and is exactly the same for me.
unfortunately that fix for my camera Powershot G6 does not work or apply as the view pictures switch is different on G6 is not usable during download as once you plug in DC/USB cable it turns off, and makes no diff and problem still exists exactly as you just described.
thanks anyways "Selz Boy"
it has been 17 days since apple promised to get back to me within 3-5 days hopefully with a solution, but I have still not heard from them.
They blew me off, i guess, probably i will have to wait for new Yosemite OS update, which they pre-warned me could take as much as 6 months.
I cannot believe apple released this new update with such major bug issues for camera downloads and that horrible "Photos" pgm which has all sorts of downgrades in features, usefulness and new bugs compared to iPhotos which I just finally got used to and was much better software.
I am starting to lose faith in Apple and I am getting that Microsoft "FEEL" like I used to have when I was a PC user, which was why I originally switched to Apple computers in first place.
Oh well got my fingers crossed here.
Thankfully the memory card reader solution is working well, but cost me $45. -
HT5457 I installed iOS6 on my iPhone4 and lost the Camera. How do I get it back?
I installed iOS6 on my iPhone4 and lost the Camera. How do I get it back?
Welcome to the Apple Community.
Try checking for rentals (Settings/General/iTunes Store/Check for Rentals) -
FaceTime Camera Images Look Poor on New Macbook Pro Retina Models
I received my new 2012 Macbook Pro Retina display model yesterday. When doing Facetime last night, others on the other end were commenting how poor the image coming from my end looked. Then I tried it on my iphone 4S and it was amazing how much better the picture of me looked on the phone versus the macbook. Today, I went to the Apple store to compare my new computer to the Retina display models on the display. Their camera images honestly didn't look much better than what I have on mine (but for example, the new Macbook Air's images look much more realistic). Why is this? How can the HD Facetime camera in the Macbook Pro produce less realistic images than the lower resolution iPhone 4S or Ipad cameras? Any help or insight you could share would be appreciated.
Thanks!
JasonThanks for the update, Jason.
Jason1975 wrote: ... There is definitely a difference between what was seen on the MacBook Pro Retina models on display and what the other sources I mentioned were displaying. Perhaps it has to do with the new display and software that isn't updated yet...
.... Unfortunately, the new laptop has the same issue...
Of course what is seen on Retina versus non-Retina display will be different. That is a different issue from the video quality your video contacts experience. However, the fact that you see the same problems at your home on a second new Mac means you will need to do some more extensive troubleshooting involving another trip to the Apple Store.
Rather than merely looking at displays of the live camera, I suggest you compare how the FaceTime video looks when received on your iPhone while in the Apple Store. If necessary, you should test your new Mac plus some of the Store models, too. Taking your new Mac & iPhone back the the Apple Store and connecting there will have the added benefit of eliminating possible internet connection issues at your location.
At the Store, you can compare how your new Mac's video transmissions (iChat, FaceTime, etc.) and video from some Store display cameras look on your iPhone as a receiving device. If all are "bad" on your iPhone, you can also compare video transmissions received on one of the Store's devices to be sure it sees the same video problem as your iPhone.
While connected via wi-fi in the Apple Store, if the FaceTime video transmissions from your new Retina MacBook Pro (RMBP) to your iPhone is lower quality from that of the Apple Store's RMBP FaceTime to your iPhone, it seems to me that the Geniuses should determine whether your new RMBP needs service or (highly unlikely) is a second "bad" Mac that should be exchanged for a RMBP that works properly. This time, test the fix BEFORE you take it home again.
If, every RMBP you test in the Apple Store looks worse than the video sent from all other devices, you are most likely correct that some software needs to be updated for video quality.
All this testing may take some time, so plan ahead. Perhaps you want to make a Genius appointment. However, although the Geniuses were unable to give a definitive answer other than swapping RMBPs during your last visit, they may have since found an official answer to your questions.
Message was edited by: EZ Jim
Mac OSX 10.7.4 -
Simultaneously trigger and display two camera images with two frame grabbers
When I try to simultaneously trigger and display two camera images, each with their own frame grabbers, Labview is only able to display one of the images at a time.
My hardware:
Two Sony XC-EU50 cameras (not in sync with each other)
NI-1410
NI-1405
My Software:
Windows XP and Labview 7.1 with IMAQ
I connect each camera to its own frame grabber. Both frame grabbers are in the same computer. I input a trigger into each frame grabber. Both trigger signals are identical. Trigger rate is only 0.2 Hz.
I want to display and save both images at the same time. The program i put together only displays one image at a time. The image that is displayed alternates from one camera to the other.
Please help with any suggestions.
Thanks.
Shahab K.
Attachments:
TriggerTwoCameras.vi 137 KBHi Shahab.
Without having triggered two cameras connected to two NI boards with LabVIEW yet: This shouldn't be a limitation in LabVIEW.
Updating two Image Display Indicators in one run of a while loop definitely works properly, so this cannot be the reason for the problem.
Your code uses the IMAQ Snap.vi. This VI is not reentrant, so the both instances of this VI on your block diagram cannot execute at the same time.
I could not find an appropriate example matching your scenario exactly. (Maybe someone else knows better?)
I recommend to have a look at the examples in the "IMAQ Signal IO.llb" and do some copy and paste to get a VI that satisfies your requirements.
The "Grab with two boards.VI" illustrates how to acquire images without using the not-reentrant "IMAQ Snap.VI".
Hope this helps, Guenter
P.S.: Do you know NI's Vision Forum? http://forums.ni.com/ni/board?board.id=200 -
After installing IOS 5.1, I am unable to double click the home button and access the camera. Is anyone else experiencing this issue? Does a fix or work aroud exist?
I just updated--my Camera is a disaster. Yes, I know how to turn (and position) the Camera now. However, every photo I take is UPSIDE DOWN in the Camera Roll OR Photo Stream. Even worse, a number of my Apps (Weather Underground, for example) are ALSO now upside down. Has anyone here experienced these serious orientation problems after this update? I've read the 'Manual' and its as if it doesn't exist. However, if I leave the Apple site, customer complaints about orientation abound...
This is my first time posting here about an issue (well, the same issue - I posted last week about the Camera, and no one responded). Any advice at all about how to get this corrected is much appreciated!
Thank you!
Lisa -
I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine
Hi there Fgonzalez2015,
You may find the camera troubleshooting steps in the article below helpful.
Get help with the camera on your iPhone, iPad, or iPod touch
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
-Griff W.
Maybe you are looking for
-
I am trying to use ncomp to load a simple java class to oracle 8.1.7.4.0 on AIX 5.1 Java 1.3 platform However I got the following error, what am I missing here? What kind of permissions are needed? And, how to grant these permissions? HelloWorld.java
-
Composing mail and limit access to Address Book groups
When composing a new email with Mail, is it possible to filter a user to only see a specific group or groups within Address Book? I am using MobileMe to sync our computers, so all contacts and contact groups are in the Address Book app on all compute
-
Hi all, I am not a developer but I put together my company's small site with Dreamweaver CS4. Here is the link to the site: http://www.ripariumsupply.com/ I manufacture accessories for planted aquariums. The layout and style of the site are very simp
-
Yosemite 10.10.2 (14C109) Preview Version 8.0 (859.7) Preview, prior to yosemite, used to be a quick program that handled pdf's and images of all sizes. my experience since updating to yosemite is that it is slower than it used to be and more prone t
-
Undefined symbols: "___gxx_personality_v0$non_lazy_ptr",referenced from:
Hi, I am getting following error while building . I tried searching on web as well for this error,but could not find a solution, suited for my problem. Searching on the web, I found two solutions : 1. Either use the compiler g++. 2. Add lib