Ichat AV 2.1 "broken pipe exit "error

Seem to have isolated the problem with ichat to "broken pipe".Ichat opens off and on but mostly not. Sometimes the welcome to ichat screen opens sometimes the buddy list. If I close it ichat wont open a second time.
I have done all the suggested things reinstall, clean install, permissions, updates , etc. ,etc. etc.
What is this "broken pipe thing??

Hi Hobart,
Broken Pipe is a reference to the iChat app not talking to the Support folders.
The only way I know to "Fix" this is to reinstall the App and the Support folders and then run the Combo installer for the OS level you are at.
I have not seen it be reported on an intermittent basis like this.
If you create another Mac User Account in System Preferences > Accounts and use the same iChat Screen name in that Mac User account does iChat Work ?
This would point to it being the .plists that are are at fault for the original User if it does.
If iChat does not work properly here even with the
/Applications/iChat.app/Contents/MacOS/iChat -errorLogLevel 7 thing then it will be the whole app and support folders that are at fault.
As it appears to be intermittent we could try Repair Permissions and Running the Cron scripts.
http://discussions.apple.com/thread.jspa?threadID=122021
But you do say you have done this.
You even say you have done a Clean Install.
Does this mean you wiped the Disk and started from Scratch ?
3:49 PM Wednesday; December 6, 2006

Similar Messages

  • Broken Pipes Error

    Hello,
              We are using Weblogic 5.1.0 SP 9 and we are getting broken pipe ioexception errors in production. Each time this occurs, which is pretty much every day, we have to restart the server. This is causing bad problems in production.
              Does anyone have any advice on troubleshooting this problem, resolving this problem, or any ideas regarding this. I heard that using WL5.10SP9 fixes this problem but we are currently using this.
              Would turning on JDBC tracing help, or any other kind of tracing help on this? Thanks,
              Rajan Roland
              

    Siew Chun wrote:
    Hi,
    I always encounter IO Exception broken pipe error when the application runs more than an hour.
    I had a firewall inbetween the DB and Weblogic application servers that do connection shut down if the line has been idled for more than an hour. I had also verified that all my program codes had done proper closing of connection after the database is updated but the problem still persist.
    Any advise anyone? By the way, I am using Weblogic 5.1 SP12. Is there a limitation in this "old" version? Could that be a limitation in terms of proxy? (by path or by extension which is better?)
    Any help anyone?Hi. set up the pool to test connections on reserve. This will also make the pool periodically test idle
    connections. This keeps them busy.
    Joe

  • OSB 11g proxy service test console fail with Broken pipe

    Hi everyone.
    I have a strange problem with OSB test console (and sometime with java client). The proxy I built cannot response after several request. In other word, I tried to test console for dozens time, sometime I cannot have response from OSB. I wait for the response for 5 minutes and get some strange exception, that is broken pipe, but error code is not unique.
    I cannot understand why my proxy service stuck in that exception. Can you help me to solve it ?
    Any suggestion is appreciated.
    P/S: that is log record on server:
    <BEA-423405> <An exception [Broken pipe] was thrown while rendering the content at [/jsp/test/ServiceResult.jsp].
    java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92) at java.net.SocketOutputStream.write(SocketOutputStream.java:136) at weblogic.servlet.internal.ChunkOutput.writeChunkTransfer(ChunkOutput.java:568) at weblogic.servlet.internal.ChunkOutput.writeChunks(ChunkOutput.java:539) at weblogic.servlet.internal.ChunkOutput.flush(ChunkOutput.java:427) at weblogic.servlet.internal.CharsetChunkOutput.flush(CharsetChunkOutput.java:298) at weblogic.servlet.internal.ChunkOutput$2.checkForFlush(ChunkOutput.java:648) at weblogic.servlet.internal.CharsetChunkOutput.write(CharsetChunkOutput.java:200) at weblogic.servlet.internal.ChunkOutputWrapper.write(ChunkOutputWrapper.java:148) at weblogic.servlet.internal.ServletOutputStreamImpl.write(ServletOutputStreamImpl.java:148) at weblogic.servlet.internal.WLOutputStreamWriter.writeBytes(WLOutputStreamWriter.java:168) at weblogic.servlet.internal.WLOutputStreamWriter.flushBuffer(WLOutputStreamWriter.java:212) at weblogic.servlet.internal.WLOutputStreamWriter.write(WLOutputStreamWriter.java:132) at weblogic.servlet.internal.WLOutputStreamWriter.write(WLOutputStreamWriter.java:113) at weblogic.servlet.internal.DelegateChunkWriter.print(DelegateChunkWriter.java:118) at weblogic.servlet.internal.ChunkOutputWrapper.print(ChunkOutputWrapper.java:171) at weblogic.servlet.jsp.JspWriterImpl.print(JspWriterImpl.java:177) at com.bea.alsb.console.taglibs.test.TestExpandableDataSection.doStartTag(TestExpandableDataSection.java:202) at jsp_servlet._jsp._test.__serviceresult._jspService(__serviceresult.java:341) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at org.apache.beehive.netui.pageflow.PageFlowPageFilter.continueChainNoWrapper(PageFlowPageFilter.java:455) at org.apache.beehive.netui.pageflow.PageFlowPageFilter.runPage(PageFlowPageFilter.java:432) at org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:284) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:524) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444) at org.apache.beehive.netui.pageflow.scoping.internal.ScopedRequestDispatcher.include(ScopedRequestDispatcher.java:119) at com.bea.netuix.servlets.controls.content.JspContent.beginRender(JspContent.java:552) at com.bea.netuix.servlets.controls.content.NetuiContent.beginRender(NetuiContent.java:365) at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:485) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:326) at com.bea.netuix.nf.UIControl.render(UIControl.java:582) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:486) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:146) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:62) at jsp_servlet._framework._skeletons._wliconsole.__flowlayout._jspService(__flowlayout.java:271) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183) at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:526) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444) at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:130) at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:72) at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:65) at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:481) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:326) at com.bea.netuix.nf.UIControl.render(UIControl.java:582) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:486) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:146) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:62) at jsp_servlet._framework._skeletons._wliconsole._popupwindow.__gridlayout._jspService(__gridlayout.java:312) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183) at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:526) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444) at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:130) at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:72) at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:65) at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:481) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:326) at com.bea.netuix.nf.UIControl.render(UIControl.java:582) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:486) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:146) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:62) at jsp_servlet._framework._skeletons._wliconsole.__flowlayout._jspService(__flowlayout.java:271) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183) at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:526) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444) at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:130) at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:72) at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:65) at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:481) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:326) at com.bea.netuix.nf.UIControl.render(UIControl.java:582) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:486) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:146) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:62) at jsp_servlet._framework._skeletons._wliconsole._popupwindow.__gridlayout._jspService(__gridlayout.java:312) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183) at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:526) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444) at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:130) at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:72) at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:65) at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:481) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361) at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:208) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:162) at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388) at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258) at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:199) at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251) at javax.servlet.http.HttpServlet.service(HttpServlet.java:820) at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209) at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)Regards
    Cuong Pham

    Hi, everyone.
    This is my proxy service that was tested above. Can you show me some instructions for tuning it? On these day, I get many bad performance responses from that service.
    <?xml version="1.0" encoding="UTF-8"?>
    <xml-fragment xmlns:ser="http://www.bea.com/wli/sb/services" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:env="http://www.bea.com/wli/config/env" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:con="http://www.bea.com/wli/sb/pipeline/config" xmlns:con1="http://www.bea.com/wli/sb/stages/transform/config" xmlns:con2="http://www.bea.com/wli/sb/stages/config" xmlns:con3="http://www.bea.com/wli/sb/stages/routing/config" xmlns:con4="http://www.bea.com/wli/sb/stages/logging/config">
      <ser:coreEntry isProxy="true" isEnabled="true" isTracingEnabled="false">
        <ser:binding type="SOAP" isSoap12="false" xsi:type="con5:SoapBindingType" xmlns:con5="http://www.bea.com/wli/sb/services/bindings/config">
          <con5:wsdl ref="DnICT_OSB_Project/resources/wsdl/PortalSide"/>
          <con5:port>
            <con5:name>PortalSideSOAP</con5:name>
            <con5:namespace>http://www.example.org/PortalSide/</con5:namespace>
          </con5:port>
          <con5:selector type="SOAP body"/>
          <con5:WSI-compliant>false</con5:WSI-compliant>
        </ser:binding>
        <ser:monitoring isEnabled="false">
          <ser:aggregationInterval>10</ser:aggregationInterval>
          <ser:pipelineMonitoringLevel>Pipeline</ser:pipelineMonitoringLevel>
        </ser:monitoring>
        <ser:reporting>true</ser:reporting>
        <ser:logging isEnabled="true">
          <ser:logLevel>debug</ser:logLevel>
        </ser:logging>
        <ser:sla-alerting isEnabled="true">
          <ser:alertLevel>normal</ser:alertLevel>
        </ser:sla-alerting>
        <ser:pipeline-alerting isEnabled="true">
          <ser:alertLevel>normal</ser:alertLevel>
        </ser:pipeline-alerting>
        <ser:ws-policy>
          <ser:binding-mode>wsdl-policy-attachments</ser:binding-mode>
        </ser:ws-policy>
      </ser:coreEntry>
      <ser:endpointConfig>
        <tran:provider-id>http</tran:provider-id>
        <tran:inbound>true</tran:inbound>
        <tran:URI>
          <env:value>/DnICT_OSB_Project/proxy-services/DnICT_WSDL_PS</env:value>
        </tran:URI>
        <tran:inbound-properties/>
        <tran:all-headers>false</tran:all-headers>
        <tran:provider-specific>
          <http:inbound-properties/>
        </tran:provider-specific>
      </ser:endpointConfig>
      <ser:router>
        <con:pipeline type="request" name="GetRequestInfo_pipeline_pair_request">
          <con:stage name="InputProcess_stage">
            <con:context>
              <con2:varNsDecl namespace="http://www.example.org/PortalSide/" prefix="por"/>
              <con2:varNsDecl namespace="http://www.example.org/PortalSide_Test/" prefix="por1"/>
              <con2:varNsDecl namespace="http://www.example.org/OutputSchema" prefix="out"/>
            </con:context>
            <con:actions>
              <con1:assign varName="docId">
                <con2:id>_ActionId-2456490176600649155--723117a.130d7d91065.-7b86</con2:id>
                <con1:expr>
                  <con2:xqueryText>$body/por:checkStatus/documentId/text()</con2:xqueryText>
                </con1:expr>
              </con1:assign>
              <con1:assign varName="depId">
                <con2:id>_ActionId-2456490176600649155--723117a.130d7d91065.-7b69</con2:id>
                <con1:expr>
                  <con2:xqueryText>$body/por:checkStatus/departmentId/text()</con2:xqueryText>
                </con1:expr>
              </con1:assign>
              <con1:assign varName="srvId">
                <con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7d41</con2:id>
                <con1:expr>
                  <con2:xqueryText>$body/por:checkStatus/serviceId/text()</con2:xqueryText>
                </con1:expr>
              </con1:assign>
            </con:actions>
          </con:stage>
        </con:pipeline>
        <con:pipeline type="response" name="GetRequestInfo_pipeline_pair_response"/>
        <con:pipeline type="error" name="_onErrorHandler-4305915913837985194--28b0abb9.13175ecaaa7.-7d31">
          <con:stage name="stage1">
            <con:context>
              <con2:userNsDecl namespace="http://www.example.org/OutputSchema" prefix="ns2"/>
            </con:context>
            <con:actions>
              <con1:replace varName="body">
                <con2:id>_ActionId-6209548530523967653-4b474d03.13177132d5d.-7f08</con2:id>
                <con1:location>
                  <con2:xpathText>.</con2:xpathText>
                </con1:location>
                <con1:expr>
                  <con2:xqueryText><![CDATA[<soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
         <soapenv:Fault>
              <faultcode>soapenv:Server</faultcode>
              <faultstring>{concat($fault/ctx:errorCode,': ',$fault/ctx:reason)}</faultstring>
              <detail>
                   <ns2:faultResponse>
                        <errorCode>{$fault/ctx:errorCode/text()}</errorCode>
                        <reason>{$fault/ctx:reason}</reason>
                        <location>
                             <node>{$fault/ctx:location/ctx:node/text()}</node>
                             <path>{$fault/ctx:location/ctx:path/text()}</path>
                        </location>
                        <operation>{$inbound/ctx:service/ctx:operation/text()}</operation>
                        <uri>{$inbound/ctx:transport/ctx:uri/text()}</uri>
                        <host>{$inbound/ctx:transport/ctx:request/tp:headers/http:Host/text()}</host>
                        <request_body>{$copyBody}</request_body>
                   </ns2:faultResponse>
              </detail>
         </soapenv:Fault>
    </soapenv:Body>]]></con2:xqueryText>
                </con1:expr>
              </con1:replace>
              <con2:reply isError="true">
                <con2:id>_ActionId-4305915913837985194--28b0abb9.13175ecaaa7.-7cc3</con2:id>
              </con2:reply>
              <con4:log>
                <con2:id>_ActionId-556838872042008716--23ff25e2.131bcfb490d.-7fae</con2:id>
                <con4:logLevel>error</con4:logLevel>
                <con4:expr>
                  <con2:xqueryText>concat('Error while trying to query DnICT web service: ',$fault/ctx:errorCode,' : ',$fault/ctx:reason)</con2:xqueryText>
                </con4:expr>
              </con4:log>
            </con:actions>
          </con:stage>
        </con:pipeline>
        <con:flow>
          <con:pipeline-node name="GetRequestInfo_pipeline_pair">
            <con:comment>Lay cac thong tin trong form search</con:comment>
            <con:request>GetRequestInfo_pipeline_pair_request</con:request>
            <con:response>GetRequestInfo_pipeline_pair_response</con:response>
          </con:pipeline-node>
          <con:branch-node type="condition" name="branching_public_services">
            <con:context>
              <con2:varNsDecl namespace="http://www.example.org/PortalSide/" prefix="por"/>
            </con:context>
            <con:branch-table variable="depId">
              <con:branch name="SoTTTT">
                <con:operator>equals</con:operator>
                <con:value>1</con:value>
                <con:flow>
                  <con:branch-node type="condition" name="DnICT_dept_services">
                    <con:context/>
                    <con:branch-table variable="srvId">
                      <con:branch name="DichVu_1">
                        <con:operator>equals</con:operator>
                        <con:value>64</con:value>
                        <con:flow>
                          <con:route-node name="RouteToDnICT_BS" error-handler="_onErrorHandler-4305915913837985194--28b0abb9.13175ecaaa7.-7d31">
                            <con:context>
                              <con2:varNsDecl namespace="http://www.example.org/PortalSide/" prefix="por"/>
                              <con2:varNsDecl namespace="http://www.example.org/PortalSide_Test/" prefix="por1"/>
                              <con2:varNsDecl namespace="http://www.example.org/OutputSchema" prefix="out"/>
                            </con:context>
                            <con:actions>
                              <con3:route>
                                <con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b4c</con2:id>
                                <con3:service ref="DnICT_OSB_Project/busines-services/DnictServiceBS" xsi:type="ref:BusinessServiceRef" xmlns:ref="http://www.bea.com/wli/sb/reference"/>
                                <con3:operation>selecttrangthai</con3:operation>
                                <con3:outboundTransform>
                                  <con1:assign varName="username">
                                    <con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b4b</con2:id>
                                    <con1:expr>
                                      <con2:xqueryText>fn:string('stttt')</con2:xqueryText>
                                    </con1:expr>
                                  </con1:assign>
                                  <con1:assign varName="password">
                                    <con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b4a</con2:id>
                                    <con1:expr>
                                      <con2:xqueryText>fn:string('123456')</con2:xqueryText>
                                    </con1:expr>
                                  </con1:assign>
                                  <con1:replace contents-only="true" varName="body">
                                    <con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b49</con2:id>
                                    <con1:expr>
                                      <con2:xqueryText><![CDATA[<soap:selecttrangthai       xmlns:soap="http://soapinterop.org/">
         <username       xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">{$username}</username>
         <password       xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">{$password}</password>
         <masohoso       xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">{$docId}</masohoso>
    </soap:selecttrangthai>]]></con2:xqueryText>
                                    </con1:expr>
                                  </con1:replace>
                                </con3:outboundTransform>
                                <con3:responseTransform/>
                              </con3:route>
                            </con:actions>
                          </con:route-node>
                        </con:flow>
                      </con:branch>
                      <con:default-branch>
                        <con:flow/>
                      </con:default-branch>
                    </con:branch-table>
                  </con:branch-node>
                </con:flow>
              </con:branch>
              <con:branch name="SoGTVT">
                <con:operator>equals</con:operator>
                <con:value>2</con:value>
                <con:flow/>
              </con:branch>
              <con:default-branch>
                <con:flow/>
              </con:default-branch>
            </con:branch-table>
          </con:branch-node>
        </con:flow>
      </ser:router>
    </xml-fragment>

  • IO Exception: Broken Pipe

    Hi,
    I use WLS6.0/Linux. I'm accessing EJBs on the server from a standalone Java
    Client application. From time to time, I suddenly get this error:
    IO Exception: Broken Pipe
    The error has not been reproducible (so far...). Any ideas what causes this
    error?
    thx
    Heiko

    I too am having the same problem with using an OAS 9.0.4. server talking to a 9iAS db. I have a Struts application that if you leave the application over night will have broken pipes in the morning. The connections should not have persisted, but might have. This problem only happens when the Servlet is left up and no activity over night.
    They claim that no restart of the server or DB happened during that time so I am betting on a timeout somewhere in the system too.
    I have two problems:
    One to set up a situation that reproduces the problem.
    Two finding out some way through JDBC to effectively test for this situation and
    be able to re-create, or re-open a connection to continue processing.
    Error in fetcAllDBRecord java.sql.SQLException: Io exception: Broken
    pipe06/09/26 09:05:25 java.sql.SQLException: Io exception: Broken pipe
    06/09/26 09:05:25 at
    oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:189)
    06/09/26 09:05:25 at
    oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:231)
    06/09/26 09:05:25 at
    oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:345)
    06/09/26 09:05:25 at
    oracle.jdbc.driver.OracleStatement.open(OracleStatement.java:717)
    06/09/26 09:05:25 at
    oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2605)
    06/09/26 09:05:25 at
    oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:777)
    ......app specific levels
    Any help would be appreciated.
    ---John Putnam

  • OS X 10.8.3 Mail Quits with launchd Exited abnormally: Broken pipe: 13

    Hello,
    I'm using OS X Mail in Mountain Lion and it keeps quitting in the middle of me typing.  The "Broken Pipe" error message I'm seeing in console is listed below.  I have 3 accounts created in Mail:  Exchange Account for Work, iCloud (IMAP) and Yahoo! (IMAP).  I didn't have issues until I started using the Exchange account for work.
    Anyone have any ideas for how to resolve this issue?
    Thanks!
    5/24/13 8:23:56.202 AM com.apple.launchd.peruser.503[412]: ([0x0-0x2186184].com.apple.mail[34681]) Exited abnormally: Broken pipe: 13

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • The "alsa audio output error: cannot write: Broken pipe" problem

    [Solved]
    (No place for this word in the Subject field, so I put it here.)
    Hi Arch community!
    I noticed I have this problem and not sure when in started. Several months ago I bought and installed new videocard "GeForce GT 630". Right after installation I lost sound in the system. Having internal sound card (in mainboard) and SB Audigy2 (PCI), I searched for solution and found I had to disable "snd_hda_intel" module to restore sound to work through PCI sound card. Did it.
    echo "blacklist snd_hda_intel" >> /etc/modprobe.d/no-nvidia-sound.conf
    After that sound was working as it should. And I noticed recently that during playing of any sound file the sound interrupts. If run VLC from CLI I get "alsa audio output error: cannot write: Broken pipe" message. And my system hasn't been upgraded since I don't know when. I still ran Firefox 26. So googled again and found it's a bug in a kernel or somewhere else.
    ==========================================
    https://bugs.freedesktop.org/show_bug.cgi?id=69942 :
    2013-10-01 01:39:40 UTC
    I ran a system update last night, and this issue appears to have been corrected.
    ==========================================
    And so I thought upgrade would fix my problem since mainstream bug is fixed. After upgrade sound interrupts again, maybe even more often.
    Do you guys have this issue and does anyone have a solution?
    Last edited by Mr. Alex (2014-06-26 18:55:59)

    Not particularly wise to blacklist the module, since it probably is also used by the integrated sound card. With vid and pid you could just disable the nvidia card alone using parameter enable=0. Unless you do not mind having both disabled.
    Where do I need to input "enable=0"? When I was searching for solution to make my Creative card work with new nVidia card I installed, the only way I found was blacklisting the module.
    dmesg says:
    [ 20.448086] nvidia 0000:02:00.0: irq 42 for MSI/MSI-X
    [ 21.112331] NVRM: Your system is not currently configured to drive a VGA console
    [ 21.112340] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
    [ 21.112345] NVRM: requires the use of a text-mode VGA console. Use of other console
    [ 21.112349] NVRM: drivers including, but not limited to, vesafb, may result in
    [ 21.112352] NVRM: corruption and stability problems, and is not supported.
    Then:
    lsmod | grep 'snd'
    snd_ca0106 36242 0
    snd_ac97_codec 114896 1 snd_ca0106
    ac97_bus 1270 1 snd_ac97_codec
    snd_rawmidi 20278 1 snd_ca0106
    snd_seq_device 5244 1 snd_rawmidi
    snd_pcm 83207 2 snd_ac97_codec,snd_ca0106
    snd_timer 19294 1 snd_pcm
    snd 60780 6 snd_ac97_codec,snd_timer,snd_pcm,snd_rawmidi,snd_seq_device,snd_ca0106
    soundcore 5551 1 snd
    I guess my card is "snd_ca0106". If yes,
    # systool -v -m snd_ca0106
    Module = "snd_ca0106"
    Attributes:
    coresize = "36242"
    initsize = "0"
    initstate = "live"
    refcnt = "0"
    taint = ""
    uevent = <store method only>
    Parameters:
    enable = "Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y"
    id = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
    index = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
    subsystem = "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
    Sections:
    .bss = "0xffffffffa0814780"
    .data = "0xffffffffa0813300"
    .exit.text = "0xffffffffa0811a1e"
    .gnu.linkonce.this_module= "0xffffffffa0814500"
    .init.text = "0xffffffffa0817000"
    .note.gnu.build-id = "0xffffffffa0811a30"
    .rodata = "0xffffffffa0811a80"
    .rodata.str1.1 = "0xffffffffa08123dc"
    .rodata.str1.8 = "0xffffffffa0812130"
    .strtab = "0xffffffffa0818c10"
    .symtab = "0xffffffffa0817020"
    .text = "0xffffffffa080d000"
    __mcount_loc = "0xffffffffa0812f98"
    __param = "0xffffffffa0812f18"
    __verbose = "0xffffffffa0814460"
    Where would I look for "max_buffer_size" parameter?

  • Broken Pipe Error-unable to write to socket for second attempt

    Hello,
    I am opening socket connection wuth C-server program.
    I am able to write and read from socket for first time but when tried to write second time in the same sequence gives broken pipe error.
    As seen in the code initialize() methods works perfectly fine,
    Pipe broken error is encountered for processRequest() method for writeBytes(begnmsg+"\n") method.
    Please suggest solution asap.
    Following is the code
    import java.io.*;
    import java.net.*;
    public class PowerModelClient {
         Socket kkSocket = null;
    BufferedReader in = null;
         PrintWriter out = null;
         DataOutputStream os = null;
              char m_eomChar = '\n';
    public PowerModelClient(){
    try{
    //Opens socket connection with C-server program,
    openConnection();
    System.out.println("connected to server");
    //Sends data base information to C-server program and receives acknowledgement from it.
    String recv = initialize();
    System.out.println("Initialize successful"+recv);
         try{
    // Sleep for a short period of time
         Thread.sleep ( 10000 );
    catch (InterruptedException ie) {}
         System.out.println("Initialize successfu 22l");
    //Sends data base information to C-server program and receives acknowledgement from it.
    processRequest();
    //Closes socket connection
         closeConnection();
         System.out.println("Comesout to do QUIT ");
    catch(Exception e){
         System.out.println("Error in main::"+e.toString());
         public static void main(String[] args) throws IOException {
                             new PowerModelClient();
    Opens socket connection with C-server program,
    public void openConnection() throws IOException{
    try {
                        kkSocket = new Socket("server",port);               os = new DataOutputStream(kkSocket.getOutputStream());
         //out = new PrintWriter(kkSocket.getOutputStream(),true);
    in = new BufferedReader(((java.io.Reader)(new InputStreamReader(kkSocket.getInputStream()))));
         } catch (UnknownHostException e) {
              System.err.println("Don't know about host: server.");
                        System.exit(1);
                   } catch (IOException e) {
                        System.out.println("Couldn't get I/O for the connection to: server."+e.getMessage());
                        System.exit(1);
         Sends data base information to C-server program and receives acknowledgement from it.
         This makes the C program to connect with Database.
         The data send to socket should be tagged between @BEGMSG@\nand @ENDMSG@\n
         Similary data obtained from socket will be tagged between @BEGMSG@\n and @ENDMSG@\n
    public String initialize() throws IOException{
                   int ibyteread = 0;
              String fromServer = "";
              String beginmsg=padString("@BEGMSG@");
              String endmsg = padString("@ENDMSG@");
              String recv = "";
              if (kkSocket != null ) {
    try {
                        // Set the socket timeout for ten seconds
                   //     kkSocket.setSoTimeout(10000);
                                       //String data = padString("INIT\tabcd\tisderssddsdg\tdrtrs1\twetewte");                              os.writeBytes(beginmsg+m_eomChar);
                   in.read();
              os.flush();
              os.writeBytes(data+m_eomChar);
              in.read();
         os.flush();
         os.writeBytes(endmsg+m_eomChar);
         os.flush();
         recv = readResponse(in);
    } catch (UnknownHostException e) {
    System.err.println("Trying to connect to unknown host: " + e);
                                                 // Exception thrown when network timeout occurs
                             catch (InterruptedIOException iioe)
                             System.err.println ("Remote host timed out during read operation");
                             catch (IOException e) {
                             System.err.println("IOException: " + e);
                             catch (Exception e) {
                   System.err.println("Exception: " + e);
              return recv;
    Sends data after database connection is established to socket for entitlement processing
    and will receive acknowledgement from server.
    public void processRequest() throws IOException{
                   int ibyteread = 0;
                   String beginmsg=padString("@BEGMSG@");
                   String endmsg = padString("@ENDMSG@");
                   String fromServer = "";
              if (kkSocket != null ) {
                   System.out.println("processRequest");
    try {
                             kkSocket.setSendBufferSize(1024);
                             kkSocket.setSoTimeout (10000);
                                       kkSocket.setTcpNoDelay(true);
         os.writeBytes(beginmsg+m_eomChar);
         int i = in.read();
         System.out.println("Data read is :"+i);
         os.writeBytes(padString("PAEL\t1056209\t269732\t02/01/2003")+m_eomChar);
    in.read();
    System.out.println("Data read is :"+i);
    out.flush();
    System.out.println("Data read is :"+ibyteread);
    os.writeBytes(endmsg+m_eomChar);
    ibyteread = in.read();
    readResponse(in);
    System.out.println("-----end Processing:--------");
    } catch (UnknownHostException e) {
    System.err.println("Trying to connect to unknown host: " + e);
    // Exception thrown when network timeout occurs
    catch (InterruptedIOException iioe)
    System.err.println ("Remote host timed out during read operation");
    catch (Exception e) {
    System.err.println("Exception: " + e);
    The socket requires data to be of length 1024 character, so the renaining length is padded with empty string"\0"
    public String padString(String value){
              StringBuffer strBuff = new StringBuffer(value);
                   while(strBuff.toString().length() != 1023){
                   strBuff.append("\0");
              //System.out.println("the length is "+ strBuff.toString().length());
              return strBuff.toString();
    Close socket
    public void closeConnection() throws IOException{
         in.close();
         os.close();
         kkSocket.close();
    public String readResponse(BufferedReader in) {
    boolean flag = false;
              java.lang.StringBuffer stringbuffer = new      StringBuffer(1024);
    try {
    // for(char ac[] = new char[1]; in.read(ac, 0, 1) != -1;) {
    char ac[] = new char[1024];
    if (in.read(ac, 0, 1) != -1) {
    stringbuffer.append(ac[0]);
    for(; in.read(ac, 0, 1) != -1 && ac[0] != m_eomChar; stringbuffer.append(ac[0]));
    if(ac[0] == m_eomChar) {
    System.out.println("received '" + stringbuffer.toString() + "'");
    } else {
    System.out.println("Message received by client was not properly terminated and was ignored."+stringbuffer.toString());
    } else {
    System.out.println("WARN: no response?");
    } catch(java.io.IOException ioexception) {
    System.out.println("Error in client " + ioexception + "Killing client.");
              return stringbuffer.toString();

    if I were you I would put the lines
    kkSocket.setSendBufferSize(1024);
    kkSocket.setSoTimeout (10000);
    kkSocket.setTcpNoDelay(true);
    before connecting to the server, not after the initial message was sent.

  • Broken Pipe Error when using database link

    We are using WebLogic 6.1 sp2 / oracle database 8.1.6. / thin drivers.
    The connection works fine, unit I try to access a view that has a union and db links
    in it.
    We have used one or the other (view or a dblink) and it works, but when used together,
    we get broken pipe error.
    I haven't proven that this is the cause, I will try to setup a test, but I was wondering
    if this is a known issue or what ??
    thanks
    Rich

    You need to create the catalog views that support distributed SQL in your remote database (the database you connect to via db_link).
    To create these views, connect "/ as sysdba" and run:
    $ORACLE_HOME/rdbms/admin/catproc.sql
    which will in turn call several other scripts including: $ORACLE_HOME/rdbms/admin/catrpc.sql (which creates your missing view)
    It is best to run the whole catproc.sql script (and not just the catrpc script).
    You can run and rerun catproc.sql several times quite safely.
    Cheers

  • Broken pipe, DMLException: JBO-26061: Error while opening JDBC connection

    Hi,
    We are facing strange problem with oc4j903 container using bc4j getConnection() method.
    We are getting the following error intermitantly using bc4j getConnection() method.
    ApplicationModuleProvider JBO-30003: The application pool (bc4j_paris) failed to checkout an application module due to the following exception:
    oralce.jbo.DMLException: JBO-26061: Error while opening JDBC connection.
    and then it says ,
    java.sql.SQLException: Io exception: Broken pipe.
    It gets connection automatically in a matter of minutes.
    Has anybody faced these problem or anyone has the solution please help us out.
    Thanks,
    Chinna

    Bhaskar -- BC4J related questions are better directed to the JDeveloper forum; that's where the BC4J PMs and developers hang out.
    cheers
    -stevee

  • DMLException: JBO-26061: Error while opening JDBC connection, Broken pipe

    Hi,
    We are facing a strange problem with oc4j903 container using bc4j getConnection() method.
    We are getting the following error intermitantly using bc4j getConnection() method.
    ApplicationModuleProvider JBO-30003: The application pool (bc4j_paris) failed to checkout an application module due to the following exception:
    oralce.jbo.DMLException: JBO-26061: Error while opening JDBC connection.
    and then it says ,
    java.sql.SQLException: Io exception: Broken pipe.
    It gets connection automatically in a matter of minutes.
    Has anybody faced these problem or anyone has the solution please help us out.
    I appreciate your inputs.
    Thanks,
    Chinna

    Bhaskar -- BC4J related questions are better directed to the JDeveloper forum; that's where the BC4J PMs and developers hang out.
    cheers
    -stevee

  • Broken pipe error in Sync Send JDBC Receiver:   Extremely Serious issue

    Hi forum,
    I have a serious error in a JDBC->XI--> JDBC scenario,
    Step1: I use a sender JDBC channel to select some distinct values from  a table say X, and update the same rows,
    Query SQL Statement: select distinct Branch from dbo.X where status = 0
    Update SQL statement: update dbo.X set Status = 2 where Status = 0
    Step 2: enter BPM
    Step 3: enter a loop
    Step 4:make a synchronous call to the same table X, to fetch some records,
    SQL query: select * from X where status = 0 and Branch = i; Update X set status = 9 where Branch = i
    Step 5: close loop,  this loop iterates for 5 or 6 times depending on i, which is no. of branches selected by the sender JDBC channel
    so all the calls are to the same table, same databsse(SQL Server)
    the problem is when this sync calls happens in the loop, it some times gives following error, which i se in RWB:
    <b>Error Unable to execute statement for table or stored procedure. 'X' (Structure 'STATEMENT_X') due to com.microsoft.sqlserver.jdbc.SQLServerException: An exception occurred during the DBComms.transmit operation. Exception:Broken pipe (errno:32). Context:(2217)</b>
    i have no way to trace the cause of the error, the database is perfect and the error logs in the SQL server shows no trace of any error,
    Note: It works sometimes
    i dont know whom to approach, pls help
    the issue is very very serious as its in production system,

    Hi Sudeep,
    SAP Note 846079 - XI 3.0 JDBC Receiver: # of Retries on SQL Error w/o Effect
    Please check the following SAP note also - 831162
    Some info which i found there and can be relevant in to your scenario.....
    Q: I am using a JDBC Receiver Adapter in conjunction with the  Lotus Domino Driver for JDBC perform an INSERT or UPDATE operation on a database. When sending a message to the receiver, the Adapter Monitoring shows the following error message:
    "java.sql.SQLException: [Lotus][Domino Driver for JDBC]Invalid cursor state"
    Is there a fix for this issue?
    A: To work around this JDBC driver problem, activate the Advanced Mode for the respective JDBC Receiver channel and configure the setting "Number of Retries of Database Transaction on SQL Error" to a value > 0. Additionally, make sure that the setting "Database Auto-Commit Enabled" is also active as the Lotus Domino Driver for JDBC does not support transactions.
    Apply note 846079 before configuring this scenario.
    Q: The TCP/IP connection to my database host is running over an unreliable network connection, i.e. the connection is sometimes interrupted. Consequently, I sporadically receive an SQLException regarding a closed connection in the system trace or audit log or the connection as well as the JDBC Adapter channel are hanging.
    How can I work around this connectivity issue?
    A: Enable the "Advanced Mode" for the respective JDBC Adapter channel and select the option "Disconnect from Database After Processing each Message".
    Note that this might put additional load on your DBMS due to the creation of a new database connection for each message.
    I dont have access to a database right now, so i am not able to check this.
    Also check the JDBC driver compatability as mentioned in the above note.
    Cheer's

  • Agentry: SSL Error - broken pipe

    Hi,
    We have a work manager 5.2 modified version running on our production environment and lately we are experiencing some weird errors when the users try to synchronize.
    Sometimes (maybe 50% of the attempts...) the synchronization process is stuck and the client doesn't show any error at all. It's just waiting while loading a complex table, replacing definitions or anything, but never finishing. Inspecting the server logs I've seen that the error that seems to cause this issue is the following:
    2014/04/10 14:22:57.203:       + ANGEL Connection=XXX.XX.XXX.XXX:XXXXX
    2014/04/10 14:22:57.203:         + ANGEL Vine=1848370469
    2014/04/10 14:22:57.203:           + User=XXXXX
    2014/04/10 14:22:57.203:             + Server=Agentry
    2014/04/10 14:22:57.203:               + Complex Table=ctmaterialstoragelocation
    2014/04/10 14:22:57.203:                 + User=XXXXX
    2014/04/10 14:22:57.203:                   + ANGEL Vine=1848370469
    2014/04/10 14:22:57.203:                     + ANGEL Connection=XXX.XX.XXX.XXX:XXXXX
    2014/04/10 14:22:57.203:                       + Data Chunk=0
    2014/04/10 14:22:57.203:                         SSL error: error:2007107C:BIO routines:BIO_write:broken pipe
    This time it happened while loading the complex table ctmaterialstoragelocation but it's just an example. It can happen in any other step.
    Do you think that this error is really related to SSL? I think it's not and my guess is that something is wrong with the network and the connection is broken but I don't know how to be sure about the root cause of the issue. Any clues that could help me?
    Thank you.
    Tags edited by: Michael Appleby

    Hi,
    I'm going to close this thread since I discovered that the issue is due to my company network problem.
    We haven't found the root cause, but after many attempts testing from my home wifi I don't face the problem, so it is not caused by the Agentry Server.

  • "printf: write error: Broken Pipe" on upgrading archlinux-keyring

    Is this anything to worry about?  The upgrade seems to have otherwise succeeded.
    (1/3) upgrading archlinux-keyring [#####################################] 100%
    ==> Appending keys from archlinux.gpg...
    gpg: 3 marginal(s) needed, 1 complete(s) needed, PGP trust model
    gpg: depth: 0 valid: 1 signed: 5 trust: 0-, 0q, 0n, 0m, 0f, 1u
    gpg: depth: 1 valid: 5 signed: 62 trust: 0-, 0q, 0n, 5m, 0f, 0u
    gpg: depth: 2 valid: 62 signed: 5 trust: 62-, 0q, 0n, 0m, 0f, 0u
    gpg: next trustdb check due at 2016-01-22
    ==> Locally signing trusted keys in keyring...
    -> Locally signing key 0E8B644079F599DFC1DDC3973348882F6AC6A4C2...
    -> Locally signing key 684148BB25B49E986A4944C55184252D824B18E8...
    -> Locally signing key 44D4A033AC140143927397D47EFD567D4C7EA887...
    -> Locally signing key 27FFC4769E19F096D41D9265A04F9397CDFD6BB0...
    -> Locally signing key AB19265E5D7D20687D303246BA1DFB64FFF979E7...
    usr/bin/pacman-key: line 609: printf: write error: Broken pipe
    ==> Importing owner trust values...
    ==> Disabling revoked keys in keyring...
    -> Disabling key F5A361A3A13554B85E57DDDAAF7EF7873CFD4BB6...
    -> Disabling key 7FA647CD89891DEDC060287BB9113D1ED21E1A55...
    -> Disabling key D4DE5ABDE2A7287644EAC7E36D1A9E70E19DAA50...
    -> Disabling key BC1FBE4D2826A0B51E47ED62E2539214C6C11350...
    -> Disabling key 9515D8A8EAB88E49BB65EDBCE6B456CAF15447D5...
    -> Disabling key 4A8B17E20B88ACA61860009B5CED81B7C2E5C0D2...
    -> Disabling key 63F395DE2D6398BBE458F281F2DBB4931985A992...
    -> Disabling key 0B20CA1931F5DA3A70D0F8D2EA6836E1AB441196...
    -> Disabling key 8F76BEEA0289F9E1D3E229C05F946DED983D4366...
    -> Disabling key 66BD74A036D522F51DD70A3C7F2A16726521E06D...
    -> Disabling key 81D7F8241DB38BC759C80FCE3A726C6170E80477...
    -> Disabling key E7210A59715F6940CF9A4E36A001876699AD6E84...
    ==> Updating trust database...
    gpg: next trustdb check due at 2016-01-22
    Last edited by weirddan455 (2015-02-14 05:58:08)

    Hi, according to line 609 of pacman-key
    /urs/bin/pacman-key wrote:608 # we cannot use --yes here as gpg would still ask for confirmation if a key has more than one uid
    609 printf 'y\ny\n' | LANG=C "${GPG_PACMAN[@]}" --command-fd 0 --quiet --batch --lsign-key "${key_id}" 2>/dev/null
    it seems that gpg has died when it tried to sign locally the key FFF979E7. If a key is not locally signed you could have problems when installing packages signed with that key.
    Does it work if you run the following command?
    pacman-key --populate archlinux

  • Web Service Error: java.sql.SQLException: Io exception: Broken pipe

    Hi,
    I am using JDeveloper PL/SQL web service generator. After some time we start receiving the "java.sql.SQLException: Io exception: Broken pipe" exception when we invoke the web service. I've noticed that the error starts occuring once all the connections in the database have been closed.
    Here are the Data Source configurations I tried using:
    <data-source name="jdev-connection-SACS" class="com.evermind.sql.DriverManagerDataSource" location="jdbc/SACSCoreDS" xa-location="jdbc/xa/SACSXADS" ejb-location="jdbc/SACSDS" pooled-location="jdbc/MACSPooledDS" connection-driver="oracle.jdbc.driver.OracleDriver" username="xxx" password="xxxx" url="jdbc:oracle:thin:@test:1521:SACS" inactivity-timeout="30" connection-retry-interval="3" max-connections="5" min-connections="0" wait-timeout="20"/>
    AND I also tried:
    <data-source name="jdev-connection-SACS" class="com.evermind.sql.DriverManagerDataSource" location="jdbc/SACSCoreDS" xa-location="jdbc/xa/SACSXADS" ejb-location="jdbc/SACSDS" pooled-location="jdbc/SACSPooledDS" connection-driver="oracle.jdbc.driver.OracleDriver" username="xxxx" password="xxxx" url="jdbc:oracle:thin:@xxxx:1521:SACS" inactivity-timeout="30"/>
    That did not make any changes.
    I then changed ConnectionContext.KEEP_CONNECTION to ConnectionContext.CLOSE_CONNECTION in the <name>Base.sqlj:
    public void release() throws SQLException
    { if (__tx!=null && __onn!=null) __tx.close(ConnectionContext.CLOSE_CONNECTION);
    __onn = null; __tx = null;
    That did not help either. We are running these web services on the standalone OC4J and Oracle 8.1.7.2 database with the MTS installed on it.

    Hi,
    I don't use JDeveloper to develop stored procedure web services. However, I do use WebServicesAssembler.jar to generate stored procedure web services.
    I had the same problem as you did. After some research in this forum, I was informed that it's a bug in the web services generator itself. I was also informed that the newest version of WebServicesAssembler.jar is supposed to fix the problem.
    If you want, you can always write a batch job to restart the OC4J periodically. The command is
    dcmctl -ct oc4j -co home
    If I come across the posting containing the answer to your solution, I will forward it to you.
    Good luck
    Jack

  • Error during RETR epilogue: FTPEx: 426 Data connection: Broken pipe

    Hi Experts,
    We have XI file to file transfer configured via the ftp...
    while im trying to upload the file from the source folder to target folder, im getting the following error: which i have tried to resolve but not able to...
    help in this regard will be greatly appreciated:
    "Could not process due to error: java.lang.IllegalStateException: Error during RETR epilogue: com.sap.aii.adapter.file.ftp.FTPEx: 426 Data connection: Broken pipe."
    Regards,
    nandan

    if I were you I would put the lines
    kkSocket.setSendBufferSize(1024);
    kkSocket.setSoTimeout (10000);
    kkSocket.setTcpNoDelay(true);
    before connecting to the server, not after the initial message was sent.

Maybe you are looking for

  • Safari doesn't open after downloading lion

    If you can help in any way, it would be much appreciated! Here is what I get after it shuts down: Process:         Safari [2530] Path:            /Applications/Safari.app/Contents/MacOS/Safari Identifier:      com.apple.Safari Version:         5.1 (7

  • Warning -- Release Preview + T60p = Fail

    General warning to those thinking about trying Windows 8, release preview, on a T60p. Not sure what they did with release preview, but it's simply awful. It doesn't recognize nearly any of the drivers for T60p hardware -- most notably the display ada

  • Jobs with running status in OEM while it was already finished

    Hi We have rebooted our server and all the jobs which are suppose to run some scripts in the server are showing running state for more than 16hours now! checking the scripts logs it was successfully executed and finished. When trying to delete the ru

  • Bulk Binding

    The below example is based on an example from Chapter 5 in Release 2 (9.2) documentation (Available in Oracle site). But it is failing and throwing the following error: "PLS-00435 DML statement without BULK In-BIND cannot be used inside FORALL". Can

  • Sort one step behind help

    Merry <insert faith here> to all tonight. I'm doing a sort by dropdown which is bound to a string object in the session bean. In page1 I do a faultsRowSet.setCommand(getSessionBean1().getChoice()) On change with the dropdown. The trouble is there is