IChat AV doesn't work with M-Audio Firewire audio interface

I saw similar topics to this but none dealing with a Firewire audio interface and none with exactly the same problem.
Every other piece of software I use works with the M-Audio Firewire Solo, except for iChat AV. When it is the selected output device and I start a video chat with someone, I get just horrible, loud static when the person on the other end speaks.
Running 10.4.10 on a Macbook Pro (2.16 GHz Intel Core 2 Duo).
Does anyone know of incompatibility issues with iChat and Firewire interfaces?

In Audio MIDI Setup (In applications/Utilities) the setting for my Mic is 44100khz 1Ch 16bit.
The Internal Audio connection also shows up at 44100Khz 2Ch 16bit
Are you looking in the same place or in the device itself ?
I would set it in the Audio MIDI Setup and then make sure it responds in System Preferences > Sound > Input tab.
Once the Blue bar moves to at least halfway there I would then check iChat > Preferences > Video Section to see if the green bar under the Vido pics is moving.
4:25 PM Friday; September 7, 2007

Similar Messages

  • IChat just doesn't work with one of my buddies

    Hi there, I can get my iChat to work with some of my buddies, I did try appleu3test and it did work for me and for this problematic buddy, I even asked one of my "working" buddies to invite first my difficult buddy, and then invite me for multi chat and all went like a whiz. I do not get the problem. Firewalls set according to Ralph's recommendations, tests do work, other buddies do work, but me. What can be wrong?
    It is PB G4 and MBP

    Hi Vladimir,
    This is either
    1) a firewall issue
    2) a NAT issue
    3) or a modem that has difficulty with iChat and SIP issue.
    Can you tell us what modems and/or routers are being used and what has been done to set them up, please ?
    9:58 PM Sunday; December 10, 2006

  • Male to male audio cable for car doesn't work with my iphone 4s?

    I have a 3.5 mm male to male cable that I have used in my car so I can listen to my music.  It works fine with my iphone 3G, but it doesn't work with the new 4s.  Is there a special cable I need to use with it?  It's weird, because my earbuds work with either iphone, but not the audio cable.  Suggestions??

    I have the exact same issue with my new 4S.
    I haven't find a solution yet.

  • MPEG-2 Plugin doesn't work with SVCD ?

    Hi,
    I just purchased the rather expensive MPEG-2 plugin for Quicktime, only to find that it doesn't work with a .mpg I have on a SVCD. Apple support in Australia have bent over backwards to help without success - apparently it just "doesn't work". Customer relations in Australia have, by comparison, been extremely poor in addressing my complaint (ie, they won't provide a refund).
    I guess this is a warning to anyone who assumes the premium priced MPEG-2 plug-in for Quicktime will play what just about every other cheap downloadable MPEG2 player will.
    Paul

    There should be no quality loss as longs as the ripped CD is in good shape...
    (XS)VCD disks have very little error correction -- that's why you can put as much as ~797.9 MB of MPEG2 data on a "80 minute CD" in (XS)VCD format, while you can put only ~703.1 MB if you treat the same CD as a regular data-CD. ...and audio-CDs use no error correction at all so you can put ~807.5 MB on an that CD if you treat it as an audio-CD!
    So a data-CD holds less stuff but it is more reliable to get a bit-for-bit copy back from it.
    So: if the (XS)VCD or audio-CD has a small defect and you rip it, then the application must sometimes guess and make the ripped data out of thin air. Luckily the human ear/eye don't usually notice any quality loss, though.
    http://www.sjoki.uta.fi/~shmhav/SVCDon_aMacintosh.html#calculations

  • Elite Pro doesn't work with 5.1 setti

    Hi, recently i have changed my card from xtreme audio to elite pro
    It was working fine during xtreme audio when i set all to 5.; when i changed to elite pro, the 5. setting doesn't work.
    The center speaker sound comes out from woofer, and the woofer is working as it should..
    My only problem now is center speaker doesn't work with elite pro.. Is there any solution?
    I have newest drivers, all installed well without error; I have check all the jacks and they are well plugged..
    I have tested all the speakers, no errors, changed back to my old card and it works well with 5.
    Please help?

    For some reason, this resolved itself today.
    It still occurred with 10.10.2, and I returned to the Apple Store to have it looked at.  After checking, their assessment was that it was something to do with Yahoo servers, for that account.   They referred me to Yahoo.   
    This morning, the Inbox loaded!!! The issue is now fixed.   I hope others are seeing their issues resolved as well.

  • ITeufel Radio v2 doesn't work with iOS 5.0.1

    My iTeufel Radio v2 doesn't work with iOS 5.0.1.
    It does not charge (just a short "beep" when connecting, but then it does not charge) and the audio function also doesn't work.
    I already tried to reset the phone, but this didn't help.
    Any ideas? Thank you.

    I got Wi-Fi to reconnect by restarting my router and re-entering the wireless password. I wonder if the wireless account passwords were lost in the update process? I wonder if I would have just had the phone “forget” the wireless account and reconnect if that would have worked.
    On an interesting side note, the exchange server connected after I got Wi-Fi back working! I am wondering if there is a issue with 3G and the new IOS 5.01? I could not get any exchange connectivity after the update on 3G.

  • Trying to load illustrator 6cs onto new mac and the old activation code for my ill cs doesn't work with it

    Trying to load a downloaded version of illustrator 6cs onto new mac and the old activation code for my illustrator cs doesn't work with it.  Do I need a new code or am I missing something?  Same goes for my Photoshop cs.

    you need your serial number.
    if you purchased from or registered with adobe check your account, https://www.adobe.com/account.html

  • Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

    Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

    Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
    DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

  • HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

    hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • TS1253 I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

    I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

    What have you tried?
    You are going to get nowhere quick with the 6.1 utility in Mountain Lion if this is the only OS you have available.
    Look up how to install 5.6 utility under ML. At least then you can see printers. That is assuming you are trying to use USB.
    Has this worked ever on Mountain Lion? Did you download the drivers for that printer for ML?
    Plug it into a computer directly.. does it work? If it doesn't work locally it sure will not work via the network.

  • My i pod nano first generation doesn't work with windows 8

    My i pod nano first generation doesn't work with windows 8

    Howdy yvesmd,
    Thanks for using the Apple Support Communities.
    If your iPod nano is not being recognized in iTunes on your Windows computer, then I'd like you to please follow the directions in the link below.
    Apple - Support - iPod - iPod nano Troubleshooting
    Cheers,
    Alex H.

  • Quicklook doesn't work with .avi files

    Hello, i've got a little problem right here on my mac. The thing is that I used to have Snow Leopard as a OS and quicklook used to work great, it opened all the extensions I used to work with. The thing change when I format my HDD and installed a clean copy of Lion OS. Now quicklook works fine as it used to but not any more with .avi files. I remember that this feature was working great on my previous OS, and it's really important for me to find a solution because quicklook is an absolutely amazing feature of our Macs.
    I've tryed to download plugins, restoring permissions or even trying it with a guest user, but no success.
    Please help me. If you need more info about specs or something i'll be glad to give them to you.
    Thank you!!!

    Also doesn't work with Grapher (.gcx) documents (an Apple format).

  • The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5.  My old android phone worked perfectly with my car.  Even the tech guy at Lexus couldn't get it to work.  What is apple doing to fix this.

    The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5.  My old android worked perfectly with my car.  Even the tech specialist at Lexus couldn't get it to work.  Lexus said that other iPhone 5s were having the same problem.  What is apple doing to fix this?

    Going to the local Apple store this morning...
    My problem is not uncommon as the board is showing signs of this happening to many others as well. That is where I found the restore and reboot information to try to solve the issue of crashing apps.
    I understand that Apple will not "give away the cow", but letting iPhone users know that the problems they are having are being addressed by Apple is a little more comforting than nothing at all. Other wise, all the apps in world are useless and even more importantly worthless, if a person has to reset/reboot/reload just to get them to work.
    IF Apple can not address the basic problems with todays iPhone apps, why should one believe that the iPhone 3.0 OS is any better? Using a PC comparison, which is better, XP or Vista. If the current iPhone OS of 2.2. what ever is not working that well (as related to down loaded apps and iTunes), will OS 3.0 be any better?
    The waste of time I refer to is in going to the apps store and downloading the apps... Again why by apps if the free version does not work?

  • Satellite M40-129: PCMCIA Card doesn't work with Linux

    I have D-Link DWL-G650 with Atheros Chipset which is good supported under linux (madwifi). But if I boot Linux the card is not found. I tested the card with an Fujitsu Siemens Notebook and it worked out of the box!
    Any idea why it doesn't work with my M40-129 ?

    Hi
    Like you know Toshiba doesnt support the Linux and there are no Toshiba drivers for the Linux OS but I was able to find this useful Toshiba page about the notebook configuration with Linux:
    http://newsletter.toshiba-tro.de/main/
    You should check the OS machine compatibility and the other areas.
    Im sure you will find many useful tips.
    Good luck

  • HT5706 I am trying to set up Apple TV with my Uverse WiFi, but I get errors when entering my password.  One site said that Apple TV doesn't work with WPA which Uverse uses.  Is there anyway around this or will Uverse and Apple TV just not work together.

    Trying to set up Apple TV with ATT Uverse.  I get errors when trying to enter my WiFi password.  One site says that Apple TV doesn't work with Uverse because it uses WPA for encryption.  If true, does that mean Uverse subscribers cannot use Apple TV?

    Spurs63 wrote:
    does that mean Uverse subscribers cannot use Apple TV?
    No, that's a rather silly conclusion.
    There are two options:
    stop using the crappy router provided by the ISP.
    Physically connect the ATV to the router via Ethernet.

Maybe you are looking for