Ichat failed to start video because..... not responded

Hi
I managed to fix this problem the last time simply by trashing com.apple.ichat.plist and com.apple.ichat.AIM.plis, you can see that discussion under this thread: "geetting error -8"
For the last year, I have switched to skype but now i have some new ichat buddies who don't want to use skype. Unfortunately it doesn't work again.
I get the "ichat failed to start video because..... not responded" problem again
I use SpeedTouch 585i v6... and i have read all the old posts about unbinding SIP etc. but I don't really have access to my router since it has been provided by the ISP, and I don't now the passward and user name to the router.
Anyhow has apple gotten any smarter about solutions to this problem?
Thanks for your time,
Kevin

Hi Crowncrow,
Same instructions but change unbind to bind
As the page says it can be difficult to completely unbind the version 5 and upwards devices.
In theory the IP phone can be off one ethernet port and the computer another on the Alcatel.
The binding presumes only one device is going to be doing SIP/VoIP so the binding says it will keep SIP to port 5060
In practice these devices and some adapters strip out all the SIP data even if it is not addressed to the Phone.
As the device can be re-set I would try unbinding it and see if it helps.
Unfortunately there has not been much success with version 5 or 6 firmware anyway and it may not help.
8:04 PM Friday; August 24, 2007

Similar Messages

CC Premiere Pro crashes on start up with "Not Responding"

CC Premiere Pro crashes on start up with "Not Responding".
Tried:
1. Reboot
2. Updating Graphics Drivers.
3. Removing Red Giant Plug-Ins from my current Adobe Common Folder.
4. Running in compatibility mode for Windows 7
5. Running as Admin
All Failed.
Got a film deadline in 24 hours, really need this fixed like 5 hours ago. Any help would be amazing.

Type Crash on Launch into the forum search. You'll get all the known fixes.

Slow start up and not responding Firefox 3.6.13

Slow start up and not responding when I open Firefox 3.6.13. As long as 1 minute. I tried in save mode and it doesn't seem to happen. I used McAfee before and now use Norton IS with Real Time Malwarebytes. Still the same speed opening up, so the virus software is not causing the problem I think. I disable a lot of the add-on and still the same problem. Any suggestions?
Vista OS

If other softwares runs fast and smooth it's obvious that it's a Firefox-problem.
Probably because of a corrupt profile.
I have done a "checklist" you could follow here: https://support.mozilla.com/en-US/questions/667207#answer-124643
Regarding slow start up, it's a common and old problem.
Not all FF-users experience it as a problem, but I used to belong to them who suffered.
If your cold start up (the first start after a Windows boot) is really slow, but a warm start (the second time you restart Firefox) is much faster - then I think I can help you.
Try my own simple solution here: https://support.mozilla.com/en-US/questions/762446#answer-119951
I run on Win 7 64-bit and on Firefox 4.0 betas, but that doesn't matter as it works also on older Windows and Firefox versions.
Regarding your anti-virus software. I have tried the most of them. The best tradeoff is in my opinion Eset Smart Security (NOD32).
If you want to try it: http://www.eset.com/download/free-trial/international
I hope this will help you :)

TS3212 I had to re download Itunes, i get 2 errors; "failed to start MSVCR80.dll not found" and "error 7, windows error 126"

iTunes will now download because of 2 errors; "failed to start MSVCR80.dll not found" and "error 7, windows error 126" using microsoft.

Click here and follow the instructions.
(98918)

Photoshop failed to quit and is not responding

I've had a nasty problem for the past few days that seems to be getting gradually worse. ie it now happens within a few minutes of openning Photoshop, whereas before it was happenning after an hour or two of working on an image....
At some point while working on a moderately complex .psd (roughly 70mb with some 15 layers) Photoshop hangs and Force Quit Applications tells me that Photoshop is not responding. I can't identify anything particular that i'm doing that triggers it.... i use a fairly wide variety of tools and filters and the hang doesn't seem to be triggered by anything specific.
I force Photoshop to quit, and it disappears from the Force Quit Application list. However, after quitting, I cannot open .psd or .jpg files from Bridge or from Finder. Raw files open up ok from Bridge into Camera Raw. And, when I try to shut down or restart my machine i get: " Logout has timed out - The application Photoshop failed to quit and is not responding." so the only way to restart is to force a shut down with the power button. After restarting the Mac Photoshop works ok again for a a while and then the problem happens again.
I have repaired my disk permissions and run Diskwarrior over both my Mac HD ad the external Firewire drive where all my images live - which didn't identify anything out or the ordinary.
Any thoughts on what else I can do to eliminate this problem would be v gratefully received
I am working on a Dual-Core Intel MacPro with 9GB memory, running OS 10.4.11 and Photoshop CS3 10.0.1 and Bridge CS3 2.1.1.9

Neil, just for reference the Cron script problem was fixed in 10.4.2 and should be run on boot if they haven't already. This doesn't mean that running cocktail occasionally to make sure doesn't have value or to run the maintance scripts early doesn't help (it wont hurt).
Nick
The 3 Gb limitation is a limitation of 32bit operating systems and software. Photoshop can't address (use) more than 3Gb regardless of how much you have free or installed. OSX 10.4 is kind of 64bit but not completly, it has the ability to remap memory so EACH program can use a max of 3Gb. so in your case with 5ish Gb used PS is using 3Gb, Safari is using a bit and the OS is prob using most of the rest.
Looking at what you posted the only two figures your really interested in is the Used and Free (which add up to approx 9Gb). The fact that the used number doesn't change from the several files open and the liquify filter opening indicates to me that it has already grabbed as much memory as it can( it's using 3Gb of the 5.52, the rest is the OS etc).
Simply put PS IS running out of memory. You can help this by putting the memory allocation in the PS preferences higher (the OS will use other areas of memory so it wont cause a problem) and make sure the scratch disk is set to a drive with plenty of space. But keep in mind the Liquify filter is VERY memory intensive so you may not be able to use it with lots of files open.
BRETT

TS1277 it says apple mobile device fails to start i do not have sufficient priveledges..... this was after i updated my i tunes so i unistalled i tunes and reinstalled but the same question persists

it says apple mobile device fails to start i do not have sufficient priveledges..... this was after i updated my i tunes so i unistalled i tunes and reinstalled but the same question persists

Hi annibu757,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden

I downloaded xbmc to my MacBook Pro and the application failed to quit and is not responding it is telling me to press continue to logout but the track pad is not responding what do I do?

I downloaded xbmc to my MacBook Pro and the application failed to quit and is not responding it is telling me to press continue to logout but the track pad is not responding what do I do?

Press and hold the power button until the machine turns off. Then restart.
Clinton

TS4009 unable to start ipad because not enough storage?

unable to start ipad because not enough storage? Why

You're iPad won't start? Try resetting it by holding the power and home buttons at the same time until you see the Apple logo, then release.

Failed to start Share could not initiate desktop share

we have calabrio QM recording as well as jabber running. we record their desktop with calabrio. however when we have a user that tries to initiate a desktop share with jabber it gives us the error "Failed to start Share could not initiate desktop share" when i stop the desktop monitoring and recording service from calabrio it works. i thought that there might be some port overlap but they have alot of ports that are open to chose form and i find that hard to believe.
i have been told that if calabrio and jabber use the same remote assistance windows api they will never work in harmony. Does anyone know if jabber uses the remote assistance api to for screen sharing?

This problem is not isolated to the Broadcom adapter. However, based on several inquiries, we list the following instructions based on other customers successfully working around this issue:
Place the Broadcom driver files in the original image folder (the image folder created when risetup.exe was executed for the first time).
Example: i:\RemoteInstall\Setup\English\Images\(Original Image)
Place the Broadcom driver files in the i386 subfolder under the original image folder
Example: i:\RemoteInstall\Setup\English\Images\(Original Image)\i386
Place the Broadcom driver files for the network adapter in the RIPREP Image folder.
Example: i:\RemoteInstall\Setup\English\Images\(RIPREP Image)
Place the Broadcom adapter drivers in the i386 subfolder where the RIPREP Image is located.
Example: i:\RemoteInstall\Setup\English\Images\(RIPREP Image)\i386
The Microsoft Knowledge base articles listed below were used as a reference for the following instructions:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;254078
http://support.microsoft.com/default.aspx?scid=kb;EN-US;246184
Found this on -
https://www.broadcom.com/support/ethernet_nic/faq_drivers.php
I don't know if this will help, looks really old, about as old as the network card :)

IChat Fails to initiate video chats

I have iChat AV 3.1.6 (v441). I am studying in the UK and use it a lot to video chat with familly in the US. This worked great for 5 months, but recently whenever I try to initiate a chat (or someone else invited me) I get the error "failed to start because I did not respond." What should I do?
My University has said they had problems with bandwith and is "throttling back" certain activities such as peer to peer. But I can still video chat on Skype (although it is poor quality). So why might iChat be different? Should I try to re-install iChat?
Thanks,
Pascal

Hi Sirdar,
Welcome to the Apple Discussions
Start with going to System Preferences > Quicktime > Streaming and set the speed to the 1.5Mbps/T1/LAN setting
Next if you Mac firewall is On go to System Preferences > Sharing > Firewall and set the ports up like the second pic here http://www.ralphjohnsuk.dsl.pipex.com/page4.html
After that it may be a question of setting up your modem and or router (opening or allowing those same ports)
10:48 PM Sunday; February 11, 2007

"Apple Mobile Device" failed to start. itunes does not recognize my iPhone4.

I decided it was time to resync the music on my iPhone since its been months. I begin the sync and after a minute or so, my iTunes suddenly does not recognize my iPhone and freezes. I honestly have no idea what happened but was undaunted.
OS is MS Windows 7 Home Premium 64 bit SP1
Now, after trying:
- updating to iTunes 10.6.3, which stops installing after a popup saying "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services. With the options Abort Retry or Ignore. Retry does nothing. Ignore allows iTunes to install but it doesn't recognize my phone still which is all I care to use iTunes for.
- uninstalling all iTunes, Apple, Quicktime, and Bonjour software, which was difficult to do since you have to follow a particular order or else they wont actually uninstall.
- performing a registry clean using CC Cleaner
- wiping my compter's apple related Temp files in app data..
- restarting with a clean boot... updating all drivers.. updating windows..
I am becoming quite daunted.
I have done essentially every single thing I could find that might resolve this error. I restarted and tried again (this is the third or maybe four time) and it still will not install.
I cannot get any third party software to recognize the phone either since I need that Apple Mobile Device. I could always sync my library with Spotify but that's cumbersome and makes me not like my beautiful iPhone.
Any help would be AMAZING. I've run out of ideas.

The link above is bad... that account has been suspended.
Just an FYI, I'm running Windows 7 Professional 64-bit and had just downloaded Itunes 10.7 for this platform.
Please know that I have NEVER plugged any Apple device into this great computer.
I have the new Iphone 5 READY to plugin and in ANTICIPATION of installing that phone; I first wanted to start by installing Itunes without any hardware potentially messing up the works.
I have the exact same problem as reported here and in about 100 places here at Apple. Please note this system has never seen ANY of these apple applications including quicktime, Itunes, Bonjour, or anything else from Apple for that matter.
So basically, I'm stuck. I've read the articles at about 20 sites now and it looks like this is a SEVERE and widespread problem; however, I have yet to find a "real" solution.
Any advise would be greatly appreciated. I'm an IT/Telecom Expert and it took me 3 hours to get the Iphone 5 setup and working properly (mainly because of the screen not working sideways for 95% of the configuration options and being forced to fat finger settings) including everything working with Icloud hosted contacts, facebook, a few networks and getting my gmail out of the way (of Icloud and facebook) and finally getting everything rocking, only to hit the wall when it came to Itunes. Kind of a drag if you ask me. (I'm thinking the Samsung Galaxy III that I returned to get this thing might have been less grief; but I guess we'll see).
Anyone with a real fix, please reply! I could use the help BEFORE I try to plug this phone into my computer!
Thanks!

Safari fails to open pages - "server not responding"

Hello all. I just got my new MacBook a few days ago. This is my first Mac and I love it! Safari was working perfectly until yesterday. When I try to open any webpage, it says that Safari "failed to open page because the server stopped responding". Any ideas?
Thanks in advance!

Hello BlueOrca,
Have you tried Safari in an other user account if not do so please.
System pref. ->Accounts -> Login Options [+] to create one. Log out of yours & into that one. This help to pinpoint if this issue is systemic or user specific
Which ISP do you use ?
Which Router do you USE, Does it have a Firewall ?
Can you find it here ? Do you know how to configure, do check the settings.
http://www.portforward.com/english/routers/port_triggering/routerindex.htm
In -> System Preferences -> Network -> Show: Wireless->
• TCP/IP tab:
Do you have DNS # Values entered in the DNS # Field Box ?
If not enter them. Find your server here and the DNS # to enter
http://www.portforward.com/networking/dns.htm
Configure IPv4: Do you use Using DHCP Lease ?
IPv6 address do you see one there? If not try setting
Configure IPv6: Is that set on Automatically, if not try that
• Proxy tab:
Do you have Proxies checked ? if you do try Deselecting it.
If AOL is a browser does it have settings that over ride Safaris ability to connect nI know nada about AOL, perhaps you could check its settings.
Let us know how you fare, okay?
edited by: Eme

Friend responds to ichat and msg saying user did not respond

Problem: When I start an ichat with a friend, she accepts and soon after, ichat says the user did not respond, even though she did. We are both out of North America at the moment - could this be the problem?
MacBook Pro Mac OS X (10.4.8)

Hi OllyOop,
Welcome to the Apple Discussions
Can you give some more details on how you are set in your Modem and such please.
Error 8 refers to port or NAT problems rather than where you are.
10:30 PM Sunday; January 14, 2007

IChat Mac-to-Mac xyz did not respond

Hello, I have a very strange case: when trying to connect to X we do not get iChat working, this is what happens:
- Select the person from the buddy list
- Connecting
- did not respond message
I have tested this also with another Mac user Y and iChat works fine. When Y connects to X it works fine too. However when Y connects to me and tries to add X then we cannot get him in the same chat "did not respond".
How is this possible and what can we do to solve it?
Bdw: skype is working fine!
Many thanks!

Hi MichaelM,
As well as testing with known good user/accounts as Defcom has offered also look at this page/section
Please note the bottom line.
11:02 PM Sunday; March 5, 2006

All crawl jobs are failing with errors, Query server not responding.

Hi All,
I'm facing issue with search service , one of the Query server not responding and all the crawl jobs are throwing errors.
Errors:
"The SharePoint item being crawled returned an error when requesting data from the web service. ( Error from SharePoint site )"
"The object was not found. ( Error from SharePoint site: HttpStatusCode NotFound The request failed with HTTP status 404: Not Found. )"
Please suggest some resolutions.
Pavan

Hi Pavan,
1. First verify as given in this article - https://support.microsoft.com/en-us/kb/2323206?wa=wsignin1.0
2. If not 1 resolves issue then try to disable the anonymous access on the default zone web application(in content source)
3. Also check this article if above two steps does not resolve the issue - http://www.sharepointtechs.com/the-sharepoint-item-being-crawled-returned-an-error-when-requesting-data-from-the-web-service-error-from-sharepoint-site-value-does-not-fall-within-the-expected-range
4. If none of the above works then install this CU update http://support.microsoft.com/kb/2596505 and
then re-run you SP Configuration Wizard and restart your SharePoint Server. But before installing this CU on your SharePoint Server ensure your have the latest backup.
4. If all above does not work then remove
the anonymous access (if enabled) and restore the site collection to a new new site.
Please remember to click 'Mark as Answer' if the reply answers your query or 'Upvote' if it helps you.

Ichat failed to start video because..... not responded

Similar Messages

Maybe you are looking for