IChat freezes for 10 seconds whenever I plug in headphones...
Does anyone else have this issue? I have the late '08 aluminum unibody with 10.6, iChat 5.0...
Any advice on this would be great.
Hi,
iChat is set to use the Mic listed in the System Preferences > Sound > Input tab
It is normally pre-set as there is only one choice on most computers to the item Listed in System Preferences > Sound > Output.
Depending if you have Built in Speaker(s) as that default choice (And no drop down in iChat for Output) AND the action of sticking in Headphones cuts the Speaker Output - then the System will Pause and check the new device plugged in before allowing apps to access it.
I would stick it in first.
8:17 PM Saturday; November 7, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
Similar Messages
-
my friend just got a new iPhone and whenever he plugs his headphones in the mic no longer works. any help on what to do?
Hello dariusLoL
Start your troubleshooting with the article below to troubleshoot issues with your friends iPhone.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Regards,
-Norm G. -
While on ichat, video will freeze for 5 seconds and come back, then continues to freeze for 5 seconds intermittently during the video chat. Happens whenever I am on iChat, regardless of who I am chatting with. Party on the other end does not see any indication that this is happening.
Hi,
You don't need iChat.
It should not be on there at all.
If the iCon in the DOCK looks like this then it is linked to iChat 4.
You should be able to Right/Control click that and get it to "Show in Finder"
Messages looks like this .
Launch Messages and set Bandwidth (Same place with the Preferences)
7:45 PM Thursday; September 20, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and and iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Equium M70-339: Playing video display freezes for second every 10sec
When I play a video/dvd etc the display sticks/freezes for a split second every 10 seconds or so. This happens when I play something online or from one of my own DVDs/CDs. It does it on all software (Windows Media, Real Player etc).
It seems to be a driver problem(?) but I can't be sure.
It is certainly very annoying! .. and seems to be getting more noticeable. Would appreciate any help as I can't find anything else on the web which explains why this happens.
thanks
JimThe newly downloaded driver worked for a short time (I'm certain I have the correct one as it actually had a link on my PC to download the latest version) but is now back to the very annoying 'stick' every 10 seconds or so. I'm not sure what else I can do to fix this - it's very frustrating as it ruins enjoyment of videos, dvds and also watching internet tv, they all do the same. Any ideas?
-
GP70 2PE Leopard game freezer for second problem
Hello,
when I'am playing a game sometimes it freeze for a second.
What could be the problem?Dear joujou333 and Nichrome
Quote from: joujou333 on 17-September-14, 06:12:37
I fixed it with KeepAliveHD, every 7 seconds it writes a txt and overwrite itselfs every 7 seconds
My games stops with freezing
Glad to hear
Quote from: Nichrome on 17-September-14, 06:42:49
Thanks VAMET for providing name of that SW
No problem
Sincerely -
ITunes 11.3 freezes on verifying whenever I plug in my iPod
I have a brand Windows based laptop that I just updated to iTunes 11.3. 11.3 freezes constantly. It takes 5 minutes to open. When it's updating podcasts it freezes and I can't do anything else on it. Whenever I connect my iPod it won't sync, it just freezes and says "Verifying iPod". I haven't had this problem with any previous version of iTunes. What's going on?
See Corrupt iPod classic.
tt2 -
I want back to the old Os 6. This new system feels more like a downgrade then an upgrade !,
http://www.extremetech.com/computing/167450-downgrading-from-ios-7-to-ios-6-why- apple-wont-let-you
You'll have to hack your iPhone 4 to revert iOS's. -
I have an ipad2 and all of a sudden I have stopped getting sound in my game apps. I get normal sound on YouTube and I player and downloaded DVDs. If I plug headphones in then I can get sounds for the games. I have switched the lock screen button off and on again and done a reset twice, can anyone help me with this?
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
Cheers, Tom -
any help would be appreciated.
Go in to system preferences-sound and make sure that your audio when your headphones are plugged in isn't panned to one side.
-
Sound stops working, 3 seconds after plugging in headphones
I have a strange issue on my phone where the sound stops working after about 3 seconds (consistently), after plugging in headphones.
I have the latest software update and I don't have any special sound modifying apps. No software I've installed ruined this, it has worked fine before, until about two weeks ago. I've also dust-cleaned the headphone jack.
Without headphones, the sound works great.
Here's an example of what happens
1. I start a video on YouTube / play a song / start a call with someone / start a game
2. The sound works well, nothing is strange at all
3. I plug in my headphones
4. The sound now works in the headphones
5. About 3 seconds later, the sound stops working completely, in all the cases above
6. The sound never returns, until I unplug my headphones
I'm clueless as to what could be causing this. Does anyone have any idea?I've tried that, but it doesn't work
It seems like a software/firmware issue, since the 3 seconds of working is 100% the same every time -
When I plug my headphones into the headphone/optical out jack programs hang
I have an iMac 20 inch LCD. On the back their is a jack with a picture of headphones, but it is also labeled as "optical out". I plug my headphones in and they work. Great. That is not my problem today.
My problem is that whenever I plug the headphones in or unplug them, iTunes (and other apps using audio) hangs and when I try to adjust the volume with the keyboard buttons nothing happens for 15 seconds or more and then the volume changes, not that anything is able to play. If I wait for a minute or so then all my applications start working fine again and I am able to hear my music and adjust the volume.
What in the world is going on?
1.8 Ghz G5 1.25GB RAM Mac OS X (10.3.9)Thank you. That is good information.
Does this mean that there is nothing I can do about the delay? When I think of a delay, I think of maybe 10 seconds. I am having to wait for a minute or more for my audio to switch. While I wait, I have no audio and any audio program hangs. Is there a setting I can change? It seems rather ridiculous that I have to wait so long just to switch from internal speakers to headphones.
It is like this on other Mac machines? Or it is just my iMac? I hate to compare Mac to Windows, but on Windows or Linux computers the switch is instantaneous. -
I have reset Firefox, then reinstalled, removed all of the extensions and plugins, uninstalled and reinstalled Flashplayer, updated Java, etc. I have also created new profiles, which have the same problem.
The problem does not appear in Safe Mode, which is odd because I have disabled all of the built-in extensions and have run the program in regular mode, and the problem still occurs. Right now I am using no extensions, no plugins, and no themes, and Firefox still freezes for a short period of time whenever I try to open a new window.
This problem does not happen in IE or Chrome. I have not installed any programs recently; the problem started happening randomly.Hi,
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode] also disables the themes ('''Appearance''') in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. and hardware acceleration - the manual setting is '''Tools''' > '''Options''' > [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u Advanced] > '''General''' > '''Use hardware acceleration when available'''. All these settings/options/add-ons can also be individually or collectively disabled/enabled/changed in Firefox normal mode to check if a theme, or hardware acceleration is causing issues. Disabling/enabling hardware acceleration, and some types of add-ons in normal mode may require a Firefox restart - a quick way to restart Firefox is to press [https://developer.mozilla.org/en-US/docs/Tools/GCLI '''Shift''' + '''F2'''], type '''restart''' and '''Enter'''. -
Mavericks freezing for a few seconds in intervals
I've just upgraded to Mavericks and I'm having an issue with it freezing for a few seconds at random intervals. happens almost everytime I switch desktops too.
herer's my system spec :
Hardware Information:
MacBook Pro (15-inch, Early 2011)
MacBook Pro - model: MacBookPro8,2
1 2 GHz Intel Core i7 CPU: 4 cores
16 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6490M - VRAM: 256 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0
AirPlay: Version: 1.9
AppleAVBAudio: Version: 2.0.0
iSightAudio: Version: 7.7.3
Startup Items:
360ControlDaemon - Path: /Library/StartupItems/360ControlDaemon
M-Audio Firmware Loader - Path: /Library/StartupItems/M-Audio Firmware Loader
MolCp3Startup - Path: /Library/StartupItems/MolCp3Startup
PACESupport - Path: /Library/StartupItems/PACESupport
tun - Path: /Library/StartupItems/tun
System Software:
OS X 10.9 (13A603) - Uptime: 2 days 0:14:50
Disk Information:
ST9500325ASG disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 499.25 GB (24.56 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
com.rim.driver.BlackBerryUSBDriverInt (0.0.74)
com.globaldelight.driver.BoomDevice (1)
com.paceap.kext.pacesupport.snowleopard (5.9)
com.protech.NoSleep (1.3.1)
net.osculator.driver.OSCulatorIOKit (1.5.1)
com.Cycling74.driver.Soundflower (1.6.2)
com.splashtop.driver.SRXDisplayCard (1.6)
net.telestream.driver.TelestreamAudio (1.0.5)
com.vara.driver.VaraAudio (1.0.3)
com.splashtop.driver.SRXFrameBufferConnector (1.6)
foo.tun (1.0)
com.logmein.hamachi (1.0)
com.aladdin.kext.aksfridge (1.0.2)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.SwitchBoard.plist
[loaded] com.aladdin.aksusbd.plist
[loaded] com.aladdin.hasplmd.plist
[loaded] com.autodesk.backburner_manager.plist
[loaded] com.autodesk.backburner_server.plist
[loaded] com.autodesk.backburner_start.plist
[not loaded] com.barebones.bbedit.plist
[loaded] com.bresink.system.securityagent3.plist
[loaded] com.cleverfiles.cfbackd.plist
[loaded] com.github.GitHub.GHInstallCLI.plist
[loaded] com.google.keystone.daemon.plist
[loaded] com.leapmotion.leapd.plist
[loaded] com.logmein.hamachi.plist
[failed] com.opengarden.meshclient.plist
[loaded] com.paceap.eden.licensed.plist
[loaded] com.rim.BBDaemon.plist
[failed] com.splashtop.streamer.SRServiceDaemon.plist
[failed] com.tidalpoolsoftware.macproxy.kext.plist
[loaded] com.tvmobili.tvmobilisvcd.plist
[loaded] org.macosforge.xquartz.privileged_startx.plist
[loaded] PACESupport.plist
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.adobe.CS5ServiceManager.plist
[loaded] com.flipvideo.FlipShare.AutoRun.plist
[loaded] com.google.keystone.agent.plist
[loaded] com.leapmotion.Leap-Motion.plist
[loaded] com.logmein.hamachimb.plist
[loaded] com.rim.BBAlbumArtCacher.plist
[loaded] com.rim.BBLaunchAgent.plist
[failed] com.splashtop.streamer.SRServiceAgent.plist
[failed] com.tidalpoolsoftware.macproxy.application.plist
[loaded] com.tvmobili.artwork.plist
[loaded] com.wacom.wacomtablet.plist
[loaded] net.culater.SIMBL.Agent.plist
[loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist
[failed] com.akamai.client.plist
[loaded] com.akamai.single-user-client.plist
[failed] [email protected]
[loaded] com.facebook.videochat.Caius.plist
[failed] com.macpaw.CleanMyMac.helperTool.plist
[loaded] com.spotify.webhelper.plist
[loaded] com.valvesoftware.steamclean.plist
[failed] net.sourceforge.tvshows.plist
[failed] ws.agile.1PasswordAgent.plist
User Login Items:
3DconnexionHelper
Dropbox
Sony Ericsson Bridge Helper
KiesAgent
fuspredownloader
3rd Party Preference Panes:
3Dconnexion
Flash Player
MacFUSE
Perian
Internet Plug-ins:
CitrixICAClientPlugIn.plugin
Default Browser.plugin
JavaAppletPlugin.plugin
DivXBrowserPlugin.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
LogMeIn.plugin
LogMeInSafari32.plugin
npgtpo3dautoplugin.plugin
o1dbrowserplugin.plugin
QuickTime Plugin.plugin
Silverlight.plugin
Unity Web Player.plugin
WacomNetscape.plugin
WacomSafari.plugin
ZigJS.plugin
User Internet Plug-ins:
iGetterBundle.plugin
WebEx64.plugin
Bad Fonts:
None
Time Machine:
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 474.69 GB
Destinations:
Seagate Expansion Drive [Local] (Last used)
Total size: 999.86 GB
Total number of backups: 5
Oldest backup: 2012-10-28 09:00:40 +0000
Last backup: 2013-10-26 18:21:53 +0000
Size of backup disk: Too small
Backup size 999.86 GB < (Disk used 474.69 GB X 3)
Top Processes by CPU:
348% Unity
6% Google Chrome
4% WindowServer
3% coreaudiod
2% Finder
1% EtreCheck
1% hidd
0% BBLaunchAgent
0% Dropbox
0% mds_stores
Top Processes by Memory:
1.12 GB Unity
1.02 GB Finder
279 MB Google Chrome
246 MB mds_stores
246 MB com.apple.IconServicesAgent
213 MB mono
164 MB softwareupdated
115 MB Sublime Text 2
115 MB WindowServer
82 MB Dropbox
Virtual Memory Statistics:
4.13 GB Free RAM
6.36 GB Active RAM
3.53 GB Inactive RAM
1.97 GB Wired RAM
12.80 GB Page-ins
0 B Page-outsThanks for you post, I was under the impression that one of the new macbook pro's comes with 16GB RAM out of the box.
I'll try your solution although I feel like is rather utilise the RAM I've paid for.
http://us.battle.net/wow/en/forum/topic/10462096123 Suggested that it's possibly the new memory compression causing the issues. This seems to fit, because I'm a game developer I tend to have quite a lot of memory intensive applications running.
Will report back if I find a solution, if there are any more suggestions I'm all ears. -
Arch freezes for a few seconds from time to time
It freezes for a 5-10 seconds and after that, everything work fine again. After one of these, I made dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.8-2-ARCH (tobias@T-POWA-LX) (gcc version 4.8.0 20130411 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Apr 23 10:28:14 CEST 2013
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=9be30883-9b56-4a19-8566-9fca564adb98 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfe6ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfe70000-0x00000000cfe87fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfe88000-0x00000000cfedbfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfedc000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: System manufacturer System Product Name/P7P55D PRO, BIOS 2101 09/27/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 120000000 mask FF0000000 write-back
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcfe70 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xcfe6ffff]
[ 0.000000] [mem 0x00000000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcfe6ffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xcfe6ffff @ [mem 0x1fffa000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x12fffffff]
[ 0.000000] [mem 0x100000000-0x12fffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x12fffffff @ [mem 0xcfe6e000-0xcfe6ffff]
[ 0.000000] RAMDISK: [mem 0x37a28000-0x37d0bfff]
[ 0.000000] ACPI: RSDP 00000000000fb970 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000cfe70000 00044 (v01 092712 RSDT2113 20120927 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cfe70200 00084 (v01 092712 FACP2113 20120927 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cfe704a0 0EFF9 (v01 A1325 A1325001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cfe88000 00040
[ 0.000000] ACPI: APIC 00000000cfe70390 000CC (v01 092712 APIC2113 20120927 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cfe70460 0003C (v01 092712 OEMMCFG 20120927 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cfe88040 00072 (v01 092712 OEMB2113 20120927 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cfe7f4a0 00038 (v01 092712 OEMHPET 20120927 MSFT 00000097)
[ 0.000000] ACPI: ASPT 00000000cfe7f740 00034 (v06 092712 PerfTune 20120927 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000cfe7f780 000B0 (v01 092712 OEMOSFR 20120927 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cfe896d0 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff]
[ 0.000000] NODE_DATA [mem 0x12fffb000-0x12fffffff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x12fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xcfe6ffff]
[ 0.000000] node 0: [mem 0x100000000-0x12fffffff]
[ 0.000000] On node 0 totalpages: 1048063
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13242 pages used for memmap
[ 0.000000] DMA32 zone: 834230 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 193536 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfe70000 - 00000000cfe88000
[ 0.000000] PM: Registered nosave memory: 00000000cfe88000 - 00000000cfedc000
[ 0.000000] PM: Registered nosave memory: 00000000cfedc000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s85184 r8192 d21312 u131072
[ 0.000000] pcpu-alloc: s85184 r8192 d21312 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031679
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=9be30883-9b56-4a19-8566-9fca564adb98 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4044444k/4980736k available (4908k kernel code, 788484k absent, 147808k reserved, 4024k data, 820k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=16.
[ 0.000000] NR_IRQS:4352 nr_irqs:808 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2675.033 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5352.98 BogoMIPS (lpj=8916776)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000036] Security Framework initialized
[ 0.000043] AppArmor: AppArmor disabled by boot time parameter
[ 0.000288] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001381] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001864] Mount-cache hash table entries: 256
[ 0.002041] Initializing cgroup subsys cpuacct
[ 0.002043] Initializing cgroup subsys memory
[ 0.002050] Initializing cgroup subsys devices
[ 0.002052] Initializing cgroup subsys freezer
[ 0.002053] Initializing cgroup subsys net_cls
[ 0.002055] Initializing cgroup subsys blkio
[ 0.002075] CPU: Physical Processor ID: 0
[ 0.002076] CPU: Processor Core ID: 0
[ 0.002080] mce: CPU supports 9 MCE banks
[ 0.002088] CPU0: Thermal monitoring enabled (TM1)
[ 0.002094] process: using mwait in idle threads
[ 0.002098] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
[ 0.002220] Freeing SMP alternatives: 20k freed
[ 0.003096] ACPI: Core revision 20121018
[ 0.112660] ftrace: allocating 19310 entries in 76 pages
[ 0.121205] Switched APIC routing to physical flat.
[ 0.121576] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.154511] smpboot: CPU0: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz (fam: 06, model: 1e, stepping: 05)
[ 0.260220] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.260225] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.260226] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.260227] ... version: 3
[ 0.260228] ... bit width: 48
[ 0.260229] ... generic registers: 4
[ 0.260230] ... value mask: 0000ffffffffffff
[ 0.260231] ... max period: 000000007fffffff
[ 0.260232] ... fixed-purpose events: 3
[ 0.260233] ... event mask: 000000070000000f
[ 0.296840] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.283586] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.329957] Brought up 4 CPUs
[ 0.329961] smpboot: Total of 4 processors activated (21408.94 BogoMIPS)
[ 0.332774] devtmpfs: initialized
[ 0.333801] PM: Registering ACPI NVS region [mem 0xcfe88000-0xcfedbfff] (344064 bytes)
[ 0.334512] RTC time: 20:37:55, date: 04/26/13
[ 0.334555] NET: Registered protocol family 16
[ 0.334672] ACPI: bus type pci registered
[ 0.334724] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.334726] PCI: not using MMCONFIG
[ 0.334728] PCI: Using configuration type 1 for base access
[ 0.335208] bio: create slab <bio-0> at 0
[ 0.335263] ACPI: Added _OSI(Module Device)
[ 0.335265] ACPI: Added _OSI(Processor Device)
[ 0.335266] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.335267] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.336392] ACPI: EC: Look up EC in DSDT
[ 0.337503] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.343814] ACPI: SSDT 00000000cfe880c0 01130 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.344124] ACPI: Dynamic OEM Table Load:
[ 0.344126] ACPI: SSDT (null) 01130 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.344194] ACPI: SSDT 00000000cfe891f0 004D5 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.344464] ACPI: Dynamic OEM Table Load:
[ 0.344466] ACPI: SSDT (null) 004D5 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.344718] ACPI: Interpreter enabled
[ 0.344722] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.344736] ACPI: Using IOAPIC for interrupt routing
[ 0.344751] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.345715] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.354230] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.354321] ACPI: No dock devices found.
[ 0.354325] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.354387] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.354389] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.354650] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.354672] PCI host bridge to bus 0000:00
[ 0.354674] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.354676] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.354677] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.354679] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.354681] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.354682] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
[ 0.354684] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed8ffff]
[ 0.354692] pci 0000:00:00.0: [8086:d131] type 00 class 0x060000
[ 0.354741] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
[ 0.354793] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
[ 0.354844] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
[ 0.354893] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
[ 0.354938] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
[ 0.354977] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
[ 0.355036] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.355056] pci 0000:00:1a.0: reg 10: [mem 0xf7afe000-0xf7afe3ff]
[ 0.355139] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.355164] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.355178] pci 0000:00:1b.0: reg 10: [mem 0xf7af8000-0xf7afbfff 64bit]
[ 0.355239] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.355258] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.355320] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.355343] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.355405] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.355425] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
[ 0.355487] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.355507] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
[ 0.355569] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.355589] pci 0000:00:1c.7: [8086:3b50] type 01 class 0x060400
[ 0.355651] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.355675] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.355694] pci 0000:00:1d.0: reg 10: [mem 0xf7afd000-0xf7afd3ff]
[ 0.355777] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.355796] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.355854] pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100
[ 0.355965] pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018f
[ 0.355979] pci 0000:00:1f.2: reg 10: [io 0x9c00-0x9c07]
[ 0.355986] pci 0000:00:1f.2: reg 14: [io 0x9880-0x9883]
[ 0.355993] pci 0000:00:1f.2: reg 18: [io 0x9800-0x9807]
[ 0.356000] pci 0000:00:1f.2: reg 1c: [io 0x9480-0x9483]
[ 0.356006] pci 0000:00:1f.2: reg 20: [io 0x9400-0x940f]
[ 0.356013] pci 0000:00:1f.2: reg 24: [io 0x9080-0x908f]
[ 0.356055] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.356068] pci 0000:00:1f.3: reg 10: [mem 0xf7afc000-0xf7afc0ff 64bit]
[ 0.356087] pci 0000:00:1f.3: reg 20: [io 0xffe0-0xffff]
[ 0.356117] pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185
[ 0.356130] pci 0000:00:1f.5: reg 10: [io 0xac00-0xac07]
[ 0.356137] pci 0000:00:1f.5: reg 14: [io 0xa880-0xa883]
[ 0.356144] pci 0000:00:1f.5: reg 18: [io 0xa800-0xa807]
[ 0.356151] pci 0000:00:1f.5: reg 1c: [io 0xa480-0xa483]
[ 0.356158] pci 0000:00:1f.5: reg 20: [io 0xa400-0xa40f]
[ 0.356165] pci 0000:00:1f.5: reg 24: [io 0xa080-0xa08f]
[ 0.356249] pci 0000:05:00.0: [1002:94b3] type 00 class 0x030000
[ 0.356267] pci 0000:05:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.356281] pci 0000:05:00.0: reg 18: [mem 0xf7ee0000-0xf7eeffff 64bit]
[ 0.356291] pci 0000:05:00.0: reg 20: [io 0xd000-0xd0ff]
[ 0.356309] pci 0000:05:00.0: reg 30: [mem 0xf7ec0000-0xf7edffff pref]
[ 0.356355] pci 0000:05:00.0: supports D1 D2
[ 0.356381] pci 0000:05:00.1: [1002:aa38] type 00 class 0x040300
[ 0.356399] pci 0000:05:00.1: reg 10: [mem 0xf7efc000-0xf7efffff 64bit]
[ 0.356483] pci 0000:05:00.1: supports D1 D2
[ 0.360049] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 0.360056] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.360062] pci 0000:00:1c.0: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.360070] pci 0000:00:1c.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.360119] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.360184] pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.360209] pci 0000:03:00.0: reg 10: [mem 0xf7dfe000-0xf7dfffff 64bit]
[ 0.360339] pci 0000:03:00.0: PME# supported from D0 D3hot
[ 0.366705] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.366713] pci 0000:00:1c.5: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.366785] pci 0000:02:00.0: [197b:2363] type 00 class 0x010185
[ 0.366869] pci 0000:02:00.0: reg 24: [mem 0xf7cfe000-0xf7cfffff]
[ 0.366929] pci 0000:02:00.0: PME# supported from D3hot
[ 0.366961] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185
[ 0.366984] pci 0000:02:00.1: reg 10: [io 0xcc00-0xcc07]
[ 0.366997] pci 0000:02:00.1: reg 14: [io 0xc880-0xc883]
[ 0.367009] pci 0000:02:00.1: reg 18: [io 0xc800-0xc807]
[ 0.367022] pci 0000:02:00.1: reg 1c: [io 0xc480-0xc483]
[ 0.367035] pci 0000:02:00.1: reg 20: [io 0xc400-0xc40f]
[ 0.367115] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.367123] pci 0000:00:1c.6: PCI bridge to [bus 02]
[ 0.367126] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 0.367130] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.367185] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.367200] pci 0000:01:00.0: reg 10: [io 0xb800-0xb8ff]
[ 0.367227] pci 0000:01:00.0: reg 18: [mem 0xdffff000-0xdfffffff 64bit pref]
[ 0.367244] pci 0000:01:00.0: reg 20: [mem 0xdfff8000-0xdfffbfff 64bit pref]
[ 0.367255] pci 0000:01:00.0: reg 30: [mem 0xf7bf0000-0xf7bfffff pref]
[ 0.367317] pci 0000:01:00.0: supports D1 D2
[ 0.367318] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.373360] pci 0000:00:1c.7: PCI bridge to [bus 01]
[ 0.373366] pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
[ 0.373371] pci 0000:00:1c.7: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.373380] pci 0000:00:1c.7: bridge window [mem 0xdff00000-0xdfffffff 64bit pref]
[ 0.373426] pci 0000:06:03.0: [1106:3044] type 00 class 0x0c0010
[ 0.373442] pci 0000:06:03.0: reg 10: [mem 0xf7fff800-0xf7ffffff]
[ 0.373451] pci 0000:06:03.0: reg 14: [io 0xec00-0xec7f]
[ 0.373515] pci 0000:06:03.0: supports D2
[ 0.373517] pci 0000:06:03.0: PME# supported from D2 D3hot D3cold
[ 0.373556] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[ 0.373559] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.373563] pci 0000:00:1e.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.373568] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.373569] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.373571] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.373572] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.373574] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
[ 0.373578] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfed8ffff] (subtractive decode)
[ 0.373607] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
[ 0.373672] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 0.373692] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT]
[ 0.373711] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT]
[ 0.373729] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR26._PRT]
[ 0.373755] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR27._PRT]
[ 0.373851] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.373980] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[ 0.373981] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.375033] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.375068] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.375098] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.375130] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.375162] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.375195] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.375227] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.375259] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.375325] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.375327] vgaarb: loaded
[ 0.375328] vgaarb: bridge control possible 0000:05:00.0
[ 0.375356] PCI: Using ACPI for IRQ routing
[ 0.376632] PCI: Discovered peer bus 3f
[ 0.376633] PCI: root bus 3f: using default resources
[ 0.376634] PCI: Probing PCI hardware (bus 3f)
[ 0.376654] PCI host bridge to bus 0000:3f
[ 0.376657] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
[ 0.376658] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.376660] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
[ 0.376665] pci 0000:3f:00.0: [8086:2c51] type 00 class 0x060000
[ 0.376686] pci 0000:3f:00.1: [8086:2c81] type 00 class 0x060000
[ 0.376703] pci 0000:3f:02.0: [8086:2c90] type 00 class 0x060000
[ 0.376719] pci 0000:3f:02.1: [8086:2c91] type 00 class 0x060000
[ 0.376736] pci 0000:3f:03.0: [8086:2c98] type 00 class 0x060000
[ 0.376752] pci 0000:3f:03.1: [8086:2c99] type 00 class 0x060000
[ 0.376768] pci 0000:3f:03.4: [8086:2c9c] type 00 class 0x060000
[ 0.376784] pci 0000:3f:04.0: [8086:2ca0] type 00 class 0x060000
[ 0.376800] pci 0000:3f:04.1: [8086:2ca1] type 00 class 0x060000
[ 0.376815] pci 0000:3f:04.2: [8086:2ca2] type 00 class 0x060000
[ 0.376830] pci 0000:3f:04.3: [8086:2ca3] type 00 class 0x060000
[ 0.376847] pci 0000:3f:05.0: [8086:2ca8] type 00 class 0x060000
[ 0.376862] pci 0000:3f:05.1: [8086:2ca9] type 00 class 0x060000
[ 0.376878] pci 0000:3f:05.2: [8086:2caa] type 00 class 0x060000
[ 0.376894] pci 0000:3f:05.3: [8086:2cab] type 00 class 0x060000
[ 0.376919] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
[ 0.377167] PCI: pci_cache_line_size set to 64 bytes
[ 0.377245] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.377246] e820: reserve RAM buffer [mem 0xcfe70000-0xcfffffff]
[ 0.377322] NetLabel: Initializing
[ 0.377324] NetLabel: domain hash size = 128
[ 0.377325] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.377334] NetLabel: unlabeled traffic allowed by default
[ 0.377364] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.377370] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
[ 0.377375] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.379402] hpet: hpet2 irq 40 for MSI
[ 0.379449] hpet: hpet3 irq 41 for MSI
[ 0.379494] hpet: hpet4 irq 42 for MSI
[ 0.379532] hpet: hpet5 irq 43 for MSI
[ 0.379547] Switching to clocksource hpet
[ 0.383196] pnp: PnP ACPI init
[ 0.383206] ACPI: bus type pnp registered
[ 0.383245] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.383248] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.383272] pnp 00:01: [dma 4]
[ 0.383290] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.383314] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.383333] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.383356] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.383504] system 00:05: [io 0x0290-0x029f] has been reserved
[ 0.383507] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.383675] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.383677] system 00:06: [io 0x0800-0x087f] has been reserved
[ 0.383679] system 00:06: [io 0x0500-0x057f] has been reserved
[ 0.383681] system 00:06: [io 0x0600-0x0607] has been reserved
[ 0.383685] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.383687] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.383689] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.383691] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.383753] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.383801] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.383853] system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.383856] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.384021] pnp 00:0a: [dma 0 disabled]
[ 0.384071] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.384155] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.384157] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.384160] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.384230] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.384233] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.384383] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.384385] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.384387] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.384389] system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.384391] system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.384394] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.384484] pnp: PnP ACPI: found 14 devices
[ 0.384486] ACPI: ACPI bus type pnp unregistered
[ 0.390847] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.390850] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ 0.390852] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
[ 0.390859] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.390861] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.390868] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.390884] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.390886] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.390888] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.390889] pci 0000:00:1c.6: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.390891] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.390893] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.390896] pci 0000:00:1c.4: BAR 14: assigned [mem 0xd0000000-0xd01fffff]
[ 0.390899] pci 0000:00:1c.4: BAR 15: assigned [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.390901] pci 0000:00:1c.5: BAR 15: assigned [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.390903] pci 0000:00:1c.6: BAR 15: assigned [mem 0xd0600000-0xd07fffff 64bit pref]
[ 0.390905] pci 0000:00:1c.4: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.390907] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.390910] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 0.390912] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.390916] pci 0000:00:1c.0: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.390919] pci 0000:00:1c.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.390924] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.390926] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
[ 0.390930] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd01fffff]
[ 0.390933] pci 0000:00:1c.4: bridge window [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.390938] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.390940] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.390944] pci 0000:00:1c.5: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.390947] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.390952] pci 0000:00:1c.6: PCI bridge to [bus 02]
[ 0.390954] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 0.390958] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.390961] pci 0000:00:1c.6: bridge window [mem 0xd0600000-0xd07fffff 64bit pref]
[ 0.390966] pci 0000:00:1c.7: PCI bridge to [bus 01]
[ 0.390968] pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
[ 0.390972] pci 0000:00:1c.7: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.390975] pci 0000:00:1c.7: bridge window [mem 0xdff00000-0xdfffffff 64bit pref]
[ 0.390980] pci 0000:00:1e.0: PCI bridge to [bus 06]
[ 0.390982] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.390986] pci 0000:00:1e.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.391004] pci 0000:00:1c.4: enabling device (0104 -> 0107)
[ 0.391009] pci 0000:00:1c.5: enabling device (0106 -> 0107)
[ 0.391031] pci 0000:00:1e.0: setting latency timer to 64
[ 0.391034] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.391036] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.391038] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.391039] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.391041] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xf7ffffff]
[ 0.391042] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfed8ffff]
[ 0.391044] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.391045] pci_bus 0000:05: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 0.391047] pci_bus 0000:05: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.391049] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.391050] pci_bus 0000:04: resource 1 [mem 0xd0000000-0xd01fffff]
[ 0.391052] pci_bus 0000:04: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.391053] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.391055] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.391056] pci_bus 0000:03: resource 2 [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.391058] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.391060] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.391061] pci_bus 0000:02: resource 2 [mem 0xd0600000-0xd07fffff 64bit pref]
[ 0.391063] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.391064] pci_bus 0000:01: resource 1 [mem 0xf7b00000-0xf7bfffff]
[ 0.391066] pci_bus 0000:01: resource 2 [mem 0xdff00000-0xdfffffff 64bit pref]
[ 0.391067] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
[ 0.391069] pci_bus 0000:06: resource 1 [mem 0xf7f00000-0xf7ffffff]
[ 0.391070] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.391072] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.391074] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.391075] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.391077] pci_bus 0000:06: resource 8 [mem 0xd0000000-0xf7ffffff]
[ 0.391078] pci_bus 0000:06: resource 9 [mem 0xfc000000-0xfed8ffff]
[ 0.391080] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
[ 0.391081] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.391111] NET: Registered protocol family 2
[ 0.391243] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.391414] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.391554] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.391576] TCP: reno registered
[ 0.391582] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.391612] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.391696] NET: Registered protocol family 1
[ 0.391778] pci 0000:05:00.0: Boot video device
[ 0.391835] PCI: CLS 32 bytes, default 64
[ 0.391863] Unpacking initramfs...
[ 0.441719] Freeing initrd memory: 2960k freed
[ 0.442083] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.442086] software IO TLB [mem 0xcbe6e000-0xcfe6e000] (64MB) mapped at [ffff8800cbe6e000-ffff8800cfe6dfff]
[ 0.442413] audit: initializing netlink socket (disabled)
[ 0.442429] type=2000 audit(1367008675.236:1): initialized
[ 0.453950] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.455230] VFS: Disk quotas dquot_6.5.2
[ 0.455270] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.455420] msgmni has been set to 7905
[ 0.455646] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.455674] io scheduler noop registered
[ 0.455676] io scheduler deadline registered
[ 0.455680] io scheduler cfq registered (default)
[ 0.455959] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[ 0.455961] vesafb: scrolling: redraw
[ 0.455962] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.456350] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004800000, using 5824k, total 5824k
[ 0.647099] Console: switching to colour frame buffer device 175x65
[ 0.836899] fb0: VESA VGA frame buffer device
[ 0.836908] intel_idle: MWAIT substates: 0x1120
[ 0.836913] intel_idle: v0.4 model 0x1E
[ 0.836914] intel_idle: lapic_timer_reliable_states 0x2
[ 0.836954] GHES: HEST is not enabled!
[ 0.837004] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.857547] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.857890] Linux agpgart interface v0.103
[ 0.857949] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.860653] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.860678] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.860767] mousedev: PS/2 mouse device common for all mice
[ 0.860809] rtc_cmos 00:02: RTC can wake from S4
[ 0.860928] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.860953] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.861011] cpuidle: using governor ladder
[ 0.861077] cpuidle: using governor menu
[ 0.861079] EFI Variables Facility v0.08 2004-May-17
[ 0.861120] drop_monitor: Initializing network drop monitor service
[ 0.861187] TCP: cubic registered
[ 0.861270] NET: Registered protocol family 10
[ 0.861409] NET: Registered protocol family 17
[ 0.861416] Key type dns_resolver registered
[ 0.861612] PM: Hibernation image not present or could not be loaded.
[ 0.861619] registered taskstats version 1
[ 0.862279] Magic number: 9:644:650
[ 0.862314] acpi LNXCPU:03: hash matches
[ 0.862370] rtc_cmos 00:02: setting system clock to 2013-04-26 20:37:56 UTC (1367008676)
[ 0.863603] Freeing unused kernel memory: 820k freed
[ 0.863740] Write protecting the kernel read-only data: 8192k
[ 0.867252] Freeing unused kernel memory: 1224k freed
[ 0.868850] Freeing unused kernel memory: 440k freed
[ 0.875189] systemd-udevd[57]: starting version 202
[ 0.892310] ACPI: bus type usb registered
[ 0.892342] usbcore: registered new interface driver usbfs
[ 0.892360] usbcore: registered new interface driver hub
[ 0.892423] usbcore: registered new device driver usb
[ 0.892866] SCSI subsystem initialized
[ 0.893648] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.894532] ehci-pci: EHCI PCI platform driver
[ 0.894561] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 0.894564] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.894571] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.894582] ehci-pci 0000:00:1a.0: debug port 2
[ 0.898484] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
[ 0.898499] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7afe000
[ 0.898661] ACPI: bus type scsi registered
[ 0.898703] libata version 3.00 loaded.
[ 0.898858] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.898861] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
[ 0.898866] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[ 0.898889] pata_jmicron 0000:02:00.1: setting latency timer to 64
[ 0.899091] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[ 0.899097] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[ 0.899102] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X
[ 0.899107] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X
[ 0.899113] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X
[ 0.899819] xHCI xhci_add_endpoint called for root hub
[ 0.899821] xHCI xhci_check_bandwidth called for root hub
[ 0.899848] hub 2-0:1.0: USB hub found
[ 0.899854] scsi0 : pata_jmicron
[ 0.899855] hub 2-0:1.0: 2 ports detected
[ 0.899938] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.899941] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 0.900062] scsi1 : pata_jmicron
[ 0.900186] ata1: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
[ 0.900188] ata2: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
[ 0.900208] ahci 0000:02:00.0: version 3.0
[ 0.900337] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.900340] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.900704] scsi2 : ahci
[ 0.900906] scsi3 : ahci
[ 0.900954] ata3: SATA max UDMA/133 abar m8192@0xf7cfe000 port 0xf7cfe100 irq 18
[ 0.900957] ata4: SATA max UDMA/133 abar m8192@0xf7cfe000 port 0xf7cfe180 irq 18
[ 0.902648] xHCI xhci_add_endpoint called for root hub
[ 0.902650] xHCI xhci_check_bandwidth called for root hub
[ 0.902695] hub 3-0:1.0: USB hub found
[ 0.902705] hub 3-0:1.0: 2 ports detected
[ 0.908458] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.908560] hub 1-0:1.0: USB hub found
[ 0.908563] hub 1-0:1.0: 2 ports detected
[ 0.908684] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 0.908687] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.908692] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.908702] ehci-pci 0000:00:1d.0: debug port 2
[ 0.912614] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
[ 0.912628] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7afd000
[ 0.921807] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.922200] hub 4-0:1.0: USB hub found
[ 0.922203] hub 4-0:1.0: 2 ports detected
[ 0.922286] ata_piix 0000:00:1f.2: version 2.13
[ 0.922301] ata_piix 0000:00:1f.2: MAP [
[ 0.922302] P0 P2 P1 P3 ]
[ 0.922329] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.922885] scsi4 : ata_piix
[ 0.923390] scsi5 : ata_piix
[ 0.923741] ata5: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 21
[ 0.923745] ata6: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 21
[ 0.923759] ata_piix 0000:00:1f.5: MAP [
[ 0.923760] P0 -- P1 -- ]
[ 0.923784] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.923951] scsi6 : ata_piix
[ 0.924274] scsi7 : ata_piix
[ 0.924564] ata7: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 21
[ 0.924567] ata8: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 21
[ 0.951836] firewire_ohci 0000:06:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.216364] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.216471] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.221344] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.252180] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.263097] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.338351] hub 1-1:1.0: USB hub found
[ 1.338573] hub 1-1:1.0: 6 ports detected
[ 1.440700] tsc: Refined TSC clocksource calibration: 2674.966 MHz
[ 1.440707] Switching to clocksource tsc
[ 1.444033] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.451003] firewire_core 0000:06:03.0: created device fw0: GUID 001e8c0001fee812, S400
[ 1.568045] hub 4-1:1.0: USB hub found
[ 1.568193] hub 4-1:1.0: 8 ports detected
[ 1.647191] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.713594] ata5.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.713610] ata5.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.713850] ata6.00: SATA link down (SStatus 0 SControl 300)
[ 1.713865] ata6.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.730371] ata6.01: ATAPI: HL-DT-ST DVDRAM GH22LS50, TL01, max UDMA/100
[ 1.743651] ata6.01: configured for UDMA/100
[ 1.747140] ata5.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7
[ 1.747145] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.747451] ata5.01: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
[ 1.747455] ata5.01: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.770425] ata5.00: configured for UDMA/133
[ 1.783857] ata5.01: configured for UDMA/133
[ 1.784175] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 1.784487] scsi 4:0:1:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
[ 1.785214] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.785230] sd 4:0:1:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.785268] sd 4:0:0:0: [sda] Write Protect is off
[ 1.785271] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.785299] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.785306] sd 4:0:1:0: [sdb] Write Protect is off
[ 1.785309] sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.785344] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.788430] scsi 5:0:1:0: CD-ROM HL-DT-ST DVDRAM GH22LS50 TL01 PQ: 0 ANSI: 5
[ 1.799605] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.799610] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.799918] sr 5:0:1:0: Attached scsi CD-ROM sr0
[ 1.822330] sdb: sdb1
[ 1.844330] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 1.850247] sd 4:0:1:0: [sdb] Attached SCSI disk
[ 1.850284] sd 4:0:0:0: [sda] Attached SCSI disk
[ 1.913075] usb 4-1.5: new low-speed USB device number 3 using ehci-pci
[ 2.006263] usbcore: registered new interface driver usbhid
[ 2.006265] usbhid: USB HID core driver
[ 2.006767] input: Dell Premium USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input0
[ 2.007103] hid-generic 0003:413C:3016.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
[ 2.079496] usb 4-1.6: new low-speed USB device number 4 using ehci-pci
[ 2.171602] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input1
[ 2.171731] hid-generic 0003:0603:00F2.0002: input,hidraw1: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.6/input0
[ 2.177205] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.1/input/input2
[ 2.177372] hid-generic 0003:0603:00F2.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.6/input1
[ 2.242439] usb 4-1.8: new high-speed USB device number 5 using ehci-pci
[ 2.594528] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 3.207207] systemd[1]: systemd 202 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.222867] systemd[1]: Set hostname to <pc_escritorio>.
[ 3.790334] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.790374] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.790385] systemd[1]: Starting Remote File Systems.
[ 3.790394] systemd[1]: Reached target Remote File Systems.
[ 3.790401] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
[ 3.790410] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.790435] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.790443] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.790459] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.790465] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.790485] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.790492] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.790506] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.790528] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.790609] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.790617] systemd[1]: Starting Encrypted Volumes.
[ 3.790625] systemd[1]: Reached target Encrypted Volumes.
[ 3.790673] systemd[1]: Starting udev Kernel Socket.
[ 3.790691] systemd[1]: Listening on udev Kernel Socket.
[ 3.790732] systemd[1]: Starting udev Control Socket.
[ 3.790751] systemd[1]: Listening on udev Control Socket.
[ 3.790761] systemd[1]: Starting Journal Socket.
[ 3.790793] systemd[1]: Listening on Journal Socket.
[ 3.790803] systemd[1]: Starting Setup Virtual Console...
[ 3.816804] systemd[1]: Starting Load Kernel Modules...
[ 3.822519] systemd[1]: Mounting Huge Pages File System...
[ 3.829146] systemd[1]: Mounting Debug File System...
[ 3.842365] systemd[1]: Starting udev Coldplug all Devices...
[ 3.849326] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.895399] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.895425] systemd[1]: Starting Journal Service...
[ 3.899230] systemd[1]: Started Journal Service.
[ 3.899259] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.899297] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.899343] systemd[1]: Starting Create static device nodes in /dev...
[ 4.341801] systemd[1]: Starting Apply Kernel Variables...
[ 4.348053] systemd[1]: Expecting device dev-sda7.device...
[ 4.348073] systemd[1]: Started File System Check on Root Device.
[ 4.348087] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 4.354687] systemd[1]: Expecting device dev-sdc1.device...
[ 4.354699] systemd[1]: Expecting device dev-sda3.device...
[ 4.354710] systemd[1]: Expecting device dev-sda6.device...
[ 4.354720] systemd[1]: Expecting device dev-sdb1.device...
[ 4.544761] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[ 4.986815] FS-Cache: Loaded
[ 5.005162] RPC: Registered named UNIX socket transport module.
[ 5.005169] RPC: Registered udp transport module.
[ 5.005170] RPC: Registered tcp transport module.
[ 5.005171] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.026296] FS-Cache: Netfs 'nfs' registered for caching
[ 5.068477] vboxguest: PCI device not found, probably running on physical hardware.
[ 5.082933] vboxguest: PCI device not found, probably running on physical hardware.
[ 5.086870] systemd-udevd[144]: starting version 202
[ 5.161623] [drm] Initialized drm 1.1.0 20060810
[ 5.634633] ACPI: Requesting acpi_cpufreq
[ 5.705282] ATK0110 ATK0110:00: EC enabled
[ 5.721889] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20121018/utaddress-251)
[ 5.721894] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.721897] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS1 1 (20121018/utaddress-251)
[ 5.721900] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 2 (20121018/utaddress-251)
[ 5.721902] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.721903] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS1 1 (20121018/utaddress-251)
[ 5.721906] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 2 (20121018/utaddress-251)
[ 5.721908] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.721925] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.725440] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 5.725445] ACPI: Power Button [PWRB]
[ 5.725478] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.725480] ACPI: Power Button [PWRF]
[ 5.802281] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.836904] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x4
[ 5.890984] wmi: Mapper loaded
[ 5.899753] EDAC MC: Ver: 3.0.0
[ 5.908589] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0
[ 5.908619] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED)
[ 5.908624] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 5.972216] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 6.060583] iTCO_vendor_support: vendor-support=0
[ 6.067690] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 6.067855] iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0860)
[ 6.068097] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.281028] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x4
[ 6.284040] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x4
[ 6.284351] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x4
[ 6.284686] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 6.288648] gpio_ich: GPIO from 180 to 255 on gpio_ich
[ 6.320963] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.321254] r8169 0000:01:00.0: irq 50 for MSI/MSI-X
[ 6.321397] r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xffffc90000614000, 00:26:18:9c:ba:13, XID 083000c0 IRQ 50
[ 6.321399] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 6.441337] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 6.685343] [drm] radeon defaulting to kernel modesetting.
[ 6.685346] [drm] radeon kernel modesetting enabled.
[ 6.685378] checking generic (e0000000 5b0000) vs hw (e0000000 10000000)
[ 6.685379] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 6.685392] Console: switching to colour dummy device 80x25
[ 6.685607] [drm] initializing kernel modesetting (RV740 0x1002:0x94B3 0x174B:0x1250).
[ 6.685637] [drm] register mmio base: 0xF7EE0000
[ 6.685638] [drm] register mmio size: 65536
[ 6.685702] ATOM BIOS: WALDEN
[ 6.685719] radeon 0000:05:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 6.685720] radeon 0000:05:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 6.685724] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 6.685725] [drm] Detected VRAM RAM=512M, BAR=256M
[ 6.685726] [drm] RAM width 128bits DDR
[ 6.685762] [TTM] Zone kernel: Available graphics memory: 2024954 kiB
[ 6.685764] [TTM] Initializing pool allocator
[ 6.685768] [TTM] Initializing DMA pool allocator
[ 6.685783] [drm] radeon: 512M of VRAM memory ready
[ 6.685784] [drm] radeon: 512M of GTT memory ready.
[ 6.685795] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.685795] [drm] Driver supports precise vblank timestamp query.
[ 6.685841] radeon 0000:05:00.0: irq 51 for MSI/MSI-X
[ 6.685850] radeon 0000:05:00.0: radeon: using MSI.
[ 6.685879] [drm] radeon: irq initialized.
[ 6.685882] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 6.686519] [drm] probing gen 2 caps for device 8086:3b42 = 1/0
[ 6.686545] [drm] Loading RV730 Microcode
[ 6.783110] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 6.783186] radeon 0000:05:00.0: WB enabled
[ 6.783189] radeon 0000:05:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880128cefc00
[ 6.783191] radeon 0000:05:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff880128cefc0c
[ 6.829909] [drm] ring test on 0 succeeded in 1 usecs
[ 6.829970] [drm] ring test on 3 succeeded in 1 usecs
[ 6.830184] [drm] ib test on ring 0 succeeded in 0 usecs
[ 6.830211] [drm] ib test on ring 3 succeeded in 0 usecs
[ 6.830369] [drm] Radeon Display Connectors
[ 6.830370] [drm] Connector 0:
[ 6.830371] [drm] VGA-1
[ 6.830372] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 6.830373] [drm] Encoders:
[ 6.830374] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 6.830375] [drm] Connector 1:
[ 6.830376] [drm] HDMI-A-1
[ 6.830376] [drm] HPD4
[ 6.830377] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[ 6.830378] [drm] Encoders:
[ 6.830379] [drm] DFP2: INTERNAL_UNIPHY1
[ 6.830380] [drm] Connector 2:
[ 6.830380] [drm] DVI-I-1
[ 6.830381] [drm] HPD1
[ 6.830382] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 6.830383] [drm] Encoders:
[ 6.830384] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 6.830384] [drm] DFP1: INTERNAL_UNIPHY
[ 6.830410] [drm] Internal thermal controller with fan control
[ 6.830449] [drm] radeon: power management initialized
[ 6.879370] media: Linux media interface: v0.10
[ 6.886455] Linux video capture interface: v2.00
[ 6.903939] [drm] fb mappable at 0xE0142000
[ 6.903940] [drm] vram apper at 0xE0000000
[ 6.903941] [drm] size 8294400
[ 6.903942] [drm] fb depth is 24
[ 6.903943] [drm] pitch is 7680
[ 6.904015] fbcon: radeondrmfb (fb0) is primary device
[ 6.948625] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0821)
[ 7.010583] Bluetooth: Core ver 2.16
[ 7.010594] NET: Registered protocol family 31
[ 7.010595] Bluetooth: HCI device and connection manager initialized
[ 7.010600] Bluetooth: HCI socket layer initialized
[ 7.010602] Bluetooth: L2CAP socket layer initialized
[ 7.010605] Bluetooth: SCO socket layer initialized
[ 7.040876] usbcore: registered new interface driver btusb
[ 7.073485] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
[ 7.081837] vboxguest: PCI device not found, probably running on physical hardware.
[ 7.091110] vboxguest: PCI device not found, probably running on physical hardware.
[ 7.102993] Console: switching to colour frame buffer device 240x67
[ 7.117325] radeon 0000:05:00.0: fb0: radeondrmfb frame buffer device
[ 7.117327] radeon 0000:05:00.0: registered panic notifier
[ 7.117330] [drm] Initialized radeon 2.29.0 20080528 for 0000:05:00.0 on minor 0
[ 7.142964] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 7.143057] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 7.143144] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.143224] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.143294] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.143370] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 7.143441] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 7.143515] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 7.143759] hda-intel 0000:05:00.1: Handle VGA-switcheroo audio client
[ 7.143890] snd_hda_intel 0000:05:00.1: irq 53 for MSI/MSI-X
[ 7.154101] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.0/0000:05:00.1/sound/card1/input14
[ 7.161734] input: UVC Camera (046d:0821) as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8:1.2/input/input15
[ 7.162124] usbcore: registered new interface driver uvcvideo
[ 7.162126] USB Video Class driver (1.1.1)
[ 7.217631] usbcore: registered new interface driver snd-usb-audio
[ 8.045197] fuse init (API version 7.20)
[ 8.116662] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[ 8.190859] EXT4-fs (sda3): mounted filesystem without journal. Opts: (null)
[ 8.262115] Adding 995992k swap on /dev/sda7. Priority:-1 extents:1 across:995992k
[ 8.486625] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
[ 9.408512] r8169 0000:01:00.0 eth0: link down
[ 9.408517] r8169 0000:01:00.0 eth0: link down
[ 9.408539] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.868316] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.868325] Bluetooth: BNEP socket layer initialized
[ 10.959362] systemd-logind[336]: Watching system buttons on /dev/input/event4 (Power Button)
[ 10.959417] systemd-logind[336]: Watching system buttons on /dev/input/event3 (Power Button)
[ 11.032246] Bluetooth: RFCOMM TTY layer initialized
[ 11.032256] Bluetooth: RFCOMM socket layer initialized
[ 11.032257] Bluetooth: RFCOMM ver 1.11
[ 11.160493] r8169 0000:01:00.0 eth0: link up
[ 11.160504] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 13.092853] vboxdrv: Found 4 processor cores.
[ 13.093515] vboxdrv: fAsync=0 offMin=0x403 offMax=0x26059
[ 13.093618] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 13.093620] vboxdrv: Successfully loaded version 4.2.12_OSE (interface 0x001a0004).
[ 13.182193] vboxpci: IOMMU not found (not registered)
[ 27.665111] EXT4-fs (sda5): re-mounted. Opts: data=ordered,commit=0
[ 27.975143] EXT4-fs (sda6): re-mounted. Opts: data=ordered,commit=0
Can be due to the last two? How can I fix it?+1 for HDD. Recommend you use smartmontools to understand if errors have been thrown. Here is an example of errors on one of my machines:
# smartctl --all /dev/sda
Error 442 occurred at disk power-on lifetime: 24196 hours (1008 days + 4 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
40 51 00 c3 8d 75 e1 Error: UNC at LBA = 0x01758dc3 = 24481219
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
c8 00 08 c0 8d 75 01 00 01:10:53.771 READ DMA
ca 00 08 b8 8d 75 01 00 01:10:53.770 WRITE DMA
c8 00 08 b8 8d 75 01 00 01:10:53.770 READ DMA
ca 00 08 b8 8d 75 01 00 01:10:53.770 WRITE DMA
c8 00 08 b8 8d 75 01 00 01:10:53.769 READ DMA
Smartctl can do short test and if completes without errors, try a long test. Still no errors? Good. You can look around for bad sectors on each partition `e2fsck -cckx /dev/sdXX`
EDIT: ...usually dmesg will show you when bad things are happening with your filesystem and bad blocks. I recently had to recover a system that suffered this fate and the dmesg output was rich with these errors.
% sudo e2fsck -cckv LABEL=archlive
e2fsck 1.42.7 (21-Jan-2013)
Checking for bad blocks (non-destructive read-write test)
Testing with random pattern: done
arch32: Updating bad block inode.
Pass 1: Checking inodes, blocks, and sizes
Running additional passes to resolve blocks claimed by more than one inode...
Pass 1B: Rescanning for multiply-claimed blocks
Multiply-claimed block(s) in inode 404766: 3658656
Pass 1C: Scanning directories for inodes with multiply-claimed blocks
Pass 1D: Reconciling multiply-claimed blocks
(There are 1 inodes containing multiply-claimed blocks.)
File /usr/share/icons/gnome/icon-theme.cache (inode #404766, mod time Mon Apr 22 16:01:20 2013)
has 1 multiply-claimed block(s), shared with 1 file(s):
<The bad blocks inode> (inode #1, mod time Mon Apr 22 16:19:28 2013)
Clone multiply-claimed blocks<y>? yes
Error reading block 3658656 (Attempt to read block from filesystem resulted in short read). Ignore error<y>? yes
Force rewrite<y>? yes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
Free blocks count wrong for group #0 (22605, counted=22604).
Fix<y>? yes
Free blocks count wrong for group #111 (6069, counted=6070).
Fix<y>? yes
arch32: ***** FILE SYSTEM WAS MODIFIED *****
105142 inodes used (11.46%, out of 917504)
516 non-contiguous files (0.5%)
41 non-contiguous directories (0.0%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 92177/120
1051659 blocks used (28.66%, out of 3670016)
3 bad blocks
1 large file
84048 regular files
7976 directories
0 character device files
0 block device files
0 fifos
1494 links
13107 symbolic links (12835 fast symbolic links)
2 sockets
106627 files
Long story short, I had to reinstall to another partition despite locking out these badblocks. I do not think this is your problem as I stated above. See what smartlctl says on the short and long tests.
Last edited by graysky (2013-04-27 16:50:10) -
please help me!!!! my macbook pro 15 running on mountain lion is hanging a lot...sometimes when i use any app than it get freeze for some seconds...what should i do?
Hardware Information:
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4 cores
4 GB RAM
System Software:
OS X 10.8.2 (12C60) - Uptime: 0 days 1:17
Disk Information:
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
disk0s1 (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 499.25 GB (424.92 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS31N
USB Information:
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
FireWire Information:
Kernel Extensions:
Problem System Launch Daemons:
[failed] com.apple.coresymbolicationd.plist
Problem System Launch Agents:
[failed] com.apple.afpstat.plist
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.rcd.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.SwitchBoard.plist
[loaded] com.google.keystone.daemon.plist
[loaded] com.microsoft.office.licensing.helper.plist
Launch Agents:
[loaded] com.adobe.CS5ServiceManager.plist
[loaded] com.google.keystone.agent.plist
User Launch Agents:
[loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
[loaded] com.facebook.videochat.Akshay.plist
[loaded] com.microsoft.LaunchAgent.SyncServicesAgent.plist
User Login Items:
Sony Ericsson Bridge Helper
BitTorrent
uTorrent
3rd Party Preference Panes:
Flash Player
Java
Internet Plug-ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
googletalkbrowserplugin.plugin
JavaAppletPlugin.plugin
npgtpo3dautoplugin.plugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
User Internet Plug-ins:
Google Earth Web Plug-in.plugin
Picasa.plugin
Bad Fonts:
None
Top Processes:
14.6 % WindowServer
6.9 % coreaudiod
6.4 % uTorrent
1.9 % WebProcess
1.4 % iTunes
1.2 % EtreCheck
0.5 % fontd
0.2 % NotificationCenter
0.1 % Dock
0.0 % Microsoft
Maybe you are looking for
-
TABLE FIELD DETERMINATION PROBLEM
Hi Experts, I have a problem described below by an example . Suppose I enter in the Tcode 'MIRO' and give the value of the field 'Inv. recpt date' and 'Reference' and then press 'ENTER' . Now I just want to know that in which table the value of the
-
Can't receive email form outside accounts
Hi everyone, I am trying to set up a mail server on [nuke dot mgh dot harvard dot edu]. I can send emails anywhere, I can receive email from the accounts created on this server, but I can't receive anything from any outside account. I know there are
-
IMac is booting from time to time after update to 10.9.1
looked in log files but didn't help. Here's one crash report Anonymous UUID: DDA08AEB-C047-B9CD-C69A-AD90D108A0DC Mon Feb 24 16:02:34 2014 panic(cpu 0 caller 0xffffff8017edc19e): Kernel trap at 0xffffff8018098f40, type 13=general protection, re
-
How can i replace backslashes with fowardslashes in a String
Hi all, I hope someone can help me with this stupid problem iv been having, i need to replace all the backslashes in a String with forwardslashes. The method replace() doesnt work because it uses Chars, also i cant use replaceAll() because im restric
-
Install time - now reading -6 hours.....
Hi, I started to install last night of 10.8 and at this point the counter is now at -7 hours and 13 minutes!!!!!! Can some tell me what is going on with my laptop? And how to get it all moving the right way please?