Ichat general error connecting

Hi all,
iChat worked great after Leopard install. I was able to do the screen sharing (weird, in a neat sort of way) and things worked fine.
Then... a few days later, iChat and Mail were extremely sluggish;
and now, ichat refuses to connect at all, saying there's a 'general error'. What does this mean?
I used the macbook pro with an airport, which is connected to our satellite box. I tried to connect the MBP straight to the satellite--it worked for a bit; now it won't even connect using the straight connect to the satellite. Mail is only working about 50% of the time.
Everything works great at school.
Also, as a side, what is a PubSubAgent? Whatever that is, it keeps crashing when I plug directly into the satellite box.
Thanks all!
Lisa

Hi Lisa,
Congratulations. You are only the second person I have seen post who has reported a successful iChat over satellite.
What happens with most modems for satellite is that when sending or getting data they start slowly and speed up to the speed your provider says they will work at.
This means when you do a speed test it is long enough to read the "Full Speed"
However iChat can start sending data faster than the modem can initially cope with and the Chat never makes a full connection.
Hopefully you have the System Preferences > Quicktime > Streaming setting at 1.5Mbps ?
For you iChat > Preferences > Video section > Bandwidth Limit may play a part.
Try 500kbps or even 200kbps
I don't know about PubSubAgent It may pay to ask about that in the Leopard general use folder/forum (Or Installation)
Form your post it does sound like your modem is fast enough and something on the Mac is slowing things.
Have you tried Repair Permissions in Disk Utility ?
Or Starting Up the computer not connected to the Internet ?
1:03 PM Sunday; November 18, 2007

Similar Messages

Ichat can't connect to my AIM account, gives me the error "Cannot log in to AIM. General error. Try again." Please help!

ichat can't connect to my AIM account, gives me the error "Cannot log in to AIM. General error. Try again." Please help!

HI,
Your specs say OS X 10.6.8 which would be iChat 5.x.x in Snow Leopard.
This version by default tries to login in to the AIM server called login.oscar.aol.com on port 5190 using the TCP protocol.
An internet connection is made up of 65535 of these so called ports (more like TV stations)
Most routers have ports up to port 1024 which means some of the iChat Login Ports are above this.
Two ways to Solve this.
1) Change the Login port iChat uses
2) Change the way the router opens ports.
For 1) go to iChat Menu > Preferences > Accounts
Highlight/select the AIM account.
In the Info Tab deselect the "Enable this Account" to make sure you are Logged out.
In the Server Settings change the Port to 443
You can decide not to use SSL as well if you wish (the server name automatically loses the leading "s")
For 2) log in to the routers set up pages and make sure it is doing UPnP
This allows the computers to tell the router which ports to open. It also allows multiple devices to use the same ports.
For iChat this allows it to Screen Share as this happens on an unlisted random port.
Opps forgot a couple of things.
If you are using an APple ID registed at Apple ending in @mac.com @me.com or @iCloud.com then the passowrd at Apple has to be 16 characters or less to work with the AIM servers.
Additionally the iCloud issued @me.com and @iCloud.com one require you to use iChat 6 in Lion or Messages in Mountian Lion due to changes Apple made to the security of letting AIM "read" the passwords.
9:38 PM Sunday; June 9, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously
Message was edited by: Ralph Johns (UK)

HS Connection to DB2 on IBM i5, Error: General error in nvITrans_BeginT

Hi there,
I try to establish a connection to a DB2 Database running on an IBM i5 via the ODBC driver for this Database. Here´s what I did:
1. Created a DSN using the Windows ODBC manager. This DSN uses the aforesaid ODBC driver and is called DB2Test. Works fine when testing it with MS Access 2003.
2. Created HS stuff in the data dictionary using caths.sql
3. Created entry in tnsnames.ora:
DB2Test =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SID = DB2Test)
(HS = OK)
4. Created entry in listener.ora:
(SID_DESC =
(SID_NAME = DB2Test)
(ORACLE_HOME = c:\oracle\ora92)
(PROGRAM = hsodbc)
5. Created initDB2Test.ora in $ORACLE_HOME\hs\admin:
# HS init parameters
HS_FDS_CONNECT_INFO = DB2Test
HS_FDS_TRACE_LEVEL = ON
6. Restarted the listener
7. Created fixed user databaselink to DB2test with correct user credentials.
So, everything looked quite OK up to the first select statement. Whenever I try to get some data I get the following error:
[S1000] [9013]General error in nvITrans_BeginT - rc = -1. Please refer to the
log file for details.
The connection itself seems to work, if I create the link with false credentials I get the corresponding error message.
Any ideas what I can try next ?
Regards
Christian

hi
give the
JDBC DRIVER = oracle.jdbc.driver.OracleDriver
connection = jdbc:oracle:thin:@<ip address>:<port no of oracle db>:dbname
check u r user name & pasword
check u query sql statement & update sql statement

Error Connecting iChat! Help?

When ever i try to connect on iChat an error message appears that says:
iChat can't communicate with the AIM account "blahblahblah"
The server connection was unexpectedly lost.
This has been happening randomly and has been happening for a few months now. When i had OS 10.5 and 10.6
Any solutions?
Thanks!

Hi,
The SSL is a Secure Layer of connection.
However the AIM servers seem to drop out on this.
The Setting in iChat 4 did not use to show you it had Changed but it would continue with a NON SSL login until you reset it Manually.
I find you have to sett SSL first for some reason in iChat 5 and then change the Port (Pressing Enter to "Set" it) and then SSL can be turned Off again.
I have mine Off as I know then it is Off and I am not presuming that it is an SSL login.
There are many reasons why.
1) iChat uses the port 5190 on the TCP Protocol to Login
It also uses this port on the UDP Protocols for File Sending, Direct IM and Group Chats. Some Modems do not like this, particularly those that have to use Port Forwarding to Open ports as Forwarding is normally a Port (or series) to one IP (Computer).
2) There is some suggestion that port 5190 gets too busy at the AIM servers.
This is likely if lots of people have to automatically Login if the SSL server goes down. That could be millions of people, let alone the rush to switch on after School/Work in some countries.
We Suggest port 443 as it is normally low enough in the port range to be open in the Modem or router.
In the Tiger Firewall it was open for Mail and Web Browsing so iChat could "Piggyback" this.
Hope this helps.
10:57 PM Tuesday; October 6, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Why does ichat video not connect? The error message says we did not respond.

Why does ichat video not connect? The error message says we did not respond.

Hi,
iChat uses several port as they are called over the internet to do different things
Text Chats and Video Chats are on different Ports.
You probably don't have the port open.
Use UPnP in your router if it has it.
8:59 PM Sunday; August 12, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Ichat giving error when trying to connect Audio or Video

my OSX10.5 IChat is not connecting with OSX10.4 user . is there some compatibility issues?
can someone help please. !!

ty

AIM general error

recently i have been using other AIM services such as Adium and Trillian, however due to errors, i returned to iChat as my primary messaging platform. However recently i have not been able to sign in to my AIM account and the error message which pops up saying "cannot log in to AIM. General error. Try again." I have tried deleting all plists and also resetting and updating, but no luck.

Hi,
AIM have only more recently added the ability to do SSL logins. (iChat 4 onwards - as opposed to the AIM for Mac prior to, and including iChat 2 and 3).
In practice we have found that the AIM servers can be logged in to on almost any port with a non SSL login.
The SSL login seems to prefer port 5190 or 443 but they are not exclusive.
The SSL server is also not as stable as the "regular" server but this could just be down to the number of devices sharing the job.
With iChat if the SSL server connection is lost ichat will default to a Non SSL Login and has to be manually reset. The info on this is not clear as to whether the setting changes itself or needs deselecting and reselecting again. (I.e. you might be blind to how iChat is actually connecting).
It is for this reason that I don't use the SSL login.
When you change the SSL setting does the port Change ?
For a Jabber account SSL is always on port 5223 and Non SSL on port 5222 and the software of iChat changes the port for you.
If the com.apple.ichat.AIM.plist is holding other info for the SSL login then it may change when you change the SSL setting.
My iChat 4 computer changes to slogin.oscar.aol.com and port 5190 and starting SSL. (The server name changes as well to have the leading s)
I can manually change it though to 443 again.
AS the Login is on the TCP Protocol and the File Sending is on port 5190 on the UDP Protocol you can have issues with some Routing devices that don't like this dual use of port 5190 - it is one of the reasons for changing to port 443
As you describe having no Login at all on Non SSL I wonder if iChat is reverting to port 5190 and having a conflict or an issue with the port being opened in the routing device.
Check the Server name and the Port the SSL login or Non SSL reverts to.
7:16 PM Friday; May 28, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

IChat video not connecting

I have been through every system check I can think of/have found online. I'm using OSX 10.6.3, and I cannot figure out why I can't connect to video or audio chat. I can send invitations, and I can receive them. However, when either I or a friend clicks to accept a video/audio chat, iChat attempts to connect, and then I get a "communication error." This only started happening very recently, and before I could have video or audio chat running for hours.
I should also mention that the times when video/audio chats have not worked, my Internet connection has been temperamental. Anyone got advice for this?

Hi,
*Lesson 1*
NAT = Network Address Translation.
This is the process the software or your routing device uses to change the data headers so that any return info comes back to your computer.
Basically a data stream is made up of loads of packets. Each packet has headers with your IP and the port it is supposed to use for th app in progress. (It also has header info of where it is going to).
This way the return info gets pointed to your modem (public IP) and your LAN IP (Computer) so that it will arrive.
Stay with me
Although the phrase or Acronym for ANT is widely used it is not actually a standard.
There are about 4 main ways of doing this with some variants on those as well.
See here
iChat Prefers the one called Full Cone but other will work as well.
Did the "Sysmetric" type get marked with an Amber blob ?
Mine reads "Port Restricted" is Amber and works.
The next bit of info we need is what devices (makes and models with Version numbers) are you using to get on the 'Net ?
There can be issues if your modem Routes and you are also using a router (both will be doing NAT)
Cable Modem generally don't route (they only do the Modem bit)
DSL modem do route as a whole (combined Modem and router type devices).
*Lesson 2*
An Internet connection is divided up into what are called ports.
The Ports refer to the gateways on to your computer for different types of internet connections. There are 65535 ports (or channels) in total.
Web Browsing is generally on port 80
FTP is on port 21 or 23 to start.
Mail servers are accessed on a number of ports depending on server type and whether incoming or outgoing. Out going STMP is often on port 25.
All these are below a threshold of 1024 and these are open in your routing device by default so that web Browsing, mail apps, and uploading Web site info by FTP works without any set up.
iChat uses ports above this threshold.
These ports have to be allowed or opened in the routing device.
To give you clearer info on the How of this We will need to know the make and model with any version numbers to be able to help.
If you are familiar with the set up pages of your device Enable UPnP as the method to open the ports needed.
9:14 PM Thursday; June 10, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Java.sql.SQLException: General error

Hi i got this error message:
java.sql.SQLException: General error
at sun.jdbc.odbc.JdbcOdbc.createSQLException(Unknown Source)
at sun.jdbc.odbc.JdbcOdbc.standardError(Unknown Source)
at sun.jdbc.odbc.JdbcOdbc.SQLExecDirect(Unknown Source)
at sun.jdbc.odbc.JdbcOdbcStatement.execute(Unknown Source)
at sun.jdbc.odbc.JdbcOdbcStatement.executeUpdate(Unknown Source)
at PersonFrame.actionPerformed(PersonFrame.java:1155)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknow
n Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Sour
ce)
at java.awt.Component.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
my code is:
while (rs.next())
String recnumber = rs.getString("Person_ Record_ Number");
int reccc=Integer.parseInt(recnumber);
if (Integer.parseInt(FamilyTree.rowselected)==reccc && AddPersonn!=0)
System.out.println ("record in table "+reccc);
System.out.println ("record selected "+FamilyTree.rowselected);
str.executeUpdate("INSERT INTO Person " +
"VALUES ('"+nameofperson.getText()+"','"+SurnameOfPersonTxt.getText()+"','"+Bday+"','EMPTY','"+DateOfDeathTogether+"','EMPTY','EMPTY','"+phone+"','"+genre+"','"+Country+"','"+FamilyTree.rowselected+"','"+Nicknametxt.getText()+"','"+Filename+"','"+BioFile+"','"+city+"','"+postal+"','EMPTY','empty','"+TimeOfBirth+"','EMPTY')");
setVisible(false);
System.out.println(Filename);
LINE 1155 that the error message says is line :str.executeUpdate("INSERT INTO Person " +
<<<PersonFrame.actionPerformed(PersonFrame.java:1155)>>>>>
also note that i didn't include a try statement here (int reccc=Integer.parseInt(recnumber) because recnumber since is created holds the value 5000 so there is no need
Also the output.. of
System.out.println("INSERT INTO Person " + "VALUES ('"+nameofperson.getText()+"','"+SurnameOfPersonTxt.getText()+"','"+Bday+"','EMPTY','"+DateOfDeathTogether+"','"+PlaceOfDeath+"','"+address+"','"+phone+"','"+genre+"','"+Country+"','"+FamilyTree.rowselected+"','"+Nicknametxt.getText()+"','"+Filename+"','"+BioFile+"','"+city+"','"+postal+"','"+Causeofdeath+"','"+PlaceBurried+"','"+TimeOfBirth+"','EMPTY')");
is:
INSERT INTO Person VALUES ('fgfgff','dfdgfd','2/1/1988','EMPTY','Person Is Alive','null','EMPTY','EMPTY','Male','EMPTY','0560','dasfds','EMPTY','EMPTY','EMPTY','EMPTY','null','null','EMPTY','EMPTY')
and my table gets only text values...
Any Help Will Be Greately Appreciated
Thanks
Nick .s

You cannot do two thing at the same time with the same statement (while your ResultSet is open you are making an insert), try using a separate Statement that the one you used for the query for the insert. If that doesn't work, make a new connection, that will do it.
If you were using a separate statement then I'm sorry, I couldn't tell from your code. I'd had a similar problem and that's the way I solved it.

I am getting Error! java.sql.SQLException:General error

hi every body,
I struck with this error , can any one suggest in solving this.
I had a table in oracledatabase ,i have successfully created a table and inserted clob column with an attachment like xxx.txt.
table format----> id and text columns
Now my question is to retrieve that data and store it in local disk i am getting this error
import java.io.*;
import java.sql.*;
//import java.sql.SQLException;
public class Cread {
public static void main(String[] args) throws ClassNotFoundException,IOException,SQLException {
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection cn=DriverManager.getConnection("jdbc:odbc:sivadsn","scott","tiger");
Statement s = cn.createStatement();
ResultSet rs=s.executeQuery("Select text from ram where id=10");
if(rs.next()){
FileOutputStream file=new FileOutputStream("c:/store.txt");
InputStream fin=rs.getBinaryStream(1);
int c;
while((c=fin.read())!=-1){
file.write(c);
fin.close();
s.close();
rs.close();
catch(IOException e){
e.printStackTrace();
System.out.println("Err:"+e);
I am getting the error as
java.sql.SQLException: General error
at sun.jdbc.odbc.JdbcOdbc.createSQLException(Unknown Source)
at sun.jdbc.odbc.JdbcOdbc.standardError(Unknown Source)
at sun.jdbc.odbc.JdbcOdbc.SQLExecDirect(Unknown Source)
at sun.jdbc.odbc.JdbcOdbcStatement.execute(Unknown Source)
at sun.jdbc.odbc.JdbcOdbcStatement.executeQuery(Unknown Source)Error! java.sql.SQLException: General error
at attach.Clobread.main(Clobread.java:30)

That usually means something is wrong with the syntax of your sql.
As a guess 'text' is probably a keyword and shouldn't be used as a field name. It is possible that the same is true for 'id'

IChat unable to connect:

I keep getting this error message when I try logging on to ichat:
Could not connect to AIM
The connection to the host was unexpectedly lost.
I have checked all of my proxy settings in firewall and have even tried my aim and .mac account. My bonjour chat seems to be working fine and other than this my internet connection is strong.
Is anyone else experiencing this? Anyone know a quick fix?

If there is a problem somewhere with your Screen name and the way it logs in to AIM this will be brought forward to Leopard when you Update as you will keep the .plists
iChat only has .plists in your Home Folder.
The Force Quitting of anything to do with iChat in the Activity monitor was to Force Quit iChatAgent (it has no icon in iChat 4)
9:03 PM Monday; March 10, 2008

Nokia Internet Radio Error: Connection Timed Out. ...

Hi,
I'm having an issue with the Nokia Internet Radio application on the Nokia N95. The app launches ok but if I try and browse the station directory or perform a search I get the error 'Connection Timed Out. Try Again' This happens almost instantly i.e. it doesn't look like it's even trying to connect. If I go to the shoutcast site and click on the 'Tune In' button next to a station the Internet radio app launches and I get an error saying 'General: System Error' and the application closes then goes back to the browser and a message saying 'Web: No Gateway Reply' The application worked fine up until recently. I upgraded to FW V 21.0.016 and hasn't worked since so it may be that this has caused the problem. I've removed and re-downloaded \ re-installed the software but still get the same issue. Web browsing works fine, so I know my internet settings are fine, and the old open-source version of the radio player even works so it's just an issue with this app. Any advice on how to fix it would be much appreciated. Thanks.

I had the same problem and I fixed it. For me, it was because I am on the Rogers network in Canada. Regardless of where you are many cellular neworks use firewalls and something called NAT (Network Address Translation). Nokia should really make people aware of this because probably 50% of people around the world have this problem. The solution for me was to use Rogers VPN or Public IP to access the internet. Rogers blocks access to this internet connection so you have to add the service to your account for $10 per month but I have heard that other carriers like FIDO have not blocked access to it.
On the Nokia n79 this requires creating a new access point under TOOLS>SETTINGS>CONNECTIONS>DESTINATIONS. Add a new access point with the following settings:
Connection Name: Rogers VPN (or whatever you want to call it)
Data Bearer: Packet Data
Access Point Name: vpn.com
User Name: wapuser1
Prompt Password: No
Password: wapuser
Authenticaiton: Normal
Homepage: None
Use Access Point: After Confirmation (or change if you want something else)
That's it. When you load the internet radio Application and it lists your options select "Rogers VPN". If you don't see it in the list, press the soft button for Options then "Select Access Point" and you will see the full list. If you want the VPN to be the first thing you see you can change the priority under destination settings. Just select the VPN and press "Organize" then "Change priority".

General Error opening project won't go away

This is really bad. I'm supposed to show the current cut of my 15 minute movie tomorrow, but FCE HD 3.5.1 shows a General Error when I try to open my project. Not just my current project, but for all project files in my Autosave Vault and most project files in the Trash, too.
Here's my setup:
MacBook Pro, OS X 10.4.9
FCE HD 3.5.1
Project File stored locally
Scratch disk on an external Firewire hard disk
Nothing about my setup has changed since I started this project
All of a sudden this afternoon I got the dreaded "General Error."
Open my project with the media disk unmounted and unplugged: General Error
Trash the preferences folder and com.apple... file: General Error
Reinstall FCE HD 3.5.1: General Error
What else is there to do? Suggestions for how I can recover my project file without recreating it would be greatly appreciated! Thanks.
john

Tom,
Your suggestions in email to me didn't solve my problem, exactly, but got me thinking along the lines that did solve my problem. Thank-you very much.
Bottom line: this is probably a bad practice (I'm an iMovie veteran, but a FCE newbie), but I had media spread in three different places. Video was on the external firewire scratch disck, some jpeg's were copied to the same folder (or subfolder) as the project file, and (the killer) some files were left on a server computer on the LAN.
At some point I had disconnected from the server and FCE freaks out over that. Rather than giving a "missing media" alert like it does for a detached media or scratch disk, it gives an unhelpful "General error."
Lesson learned: when opening a project file, be sure you are connected to any and all servers on your LAN from which you may have imported media, like pictures.
Thanks, Tom!
john

Getting javax.servlet.ServletException: General error

Someone pls help me....
I am getting General Error while inserting a row in database.I am not able to solve this error...I would really appreciate your help...Thanks in advance...
Following is my Code ::
<%! int countBts,countBts1,mmm; %>
<%! String msg; %>
<%
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
String dataSourceName = "ProjData";
String dbURL = "jdbc:odbc:" + dataSourceName;
Connection conn = DriverManager.getConnection(dbURL, "","");
int dataMgx= Integer.parseInt(request.getParameter("allocMgxId"));
int dataFrsm=Integer.parseInt(request.getParameter("allocFrsmSlotNo"));
int dataPort=Integer.parseInt(request.getParameter("allocPortNo"));
int dataBts=Integer.parseInt(request.getParameter("bts1"));
int dataRpm=Integer.parseInt(request.getParameter("allocRpmNo"));
int dataMultiLink=Integer.parseInt(request.getParameter("allocMultiLinkNo"));
String dataPortStatus= "vacant";
Statement myStat1 = conn.createStatement();
myStat1.execute("select count(BTS_ID) from MGX where BTS_ID=" + dataBts);
ResultSet result1 = myStat1.getResultSet();
if(result1.next())
     countBts=Integer.parseInt(result1.getString(1));
countBts1=countBts+1;
if(countBts > 6)
     msg="Configuration of more than 6 spans not allowed";
%>
<h3><%=msg %></h3>
<%}
else
PreparedStatement stmt1 =
conn.prepareStatement(("Insert into MGX (BTS_ID,Port_Status,MGX_Num,Port_No,FRSM_No,RPM_Card,Multi_Link) values ("+dataBts+",'"+dataPortStatus+"',"+dataMgx+","+dataPort+","+dataFrsm+","+dataRpm+","+dataMultiLink+")"));
mmm =     stmt1.executeUpdate();
stmt1.close();
if(mmm == 1)
msg="One SpanRecord successfully added in the Database ";
else
msg="Failure in Update Operation";
     result1.close();
     myStat1.close();
     conn.close();
%>
The error I am getting is as follows::
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: General error
     org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:867)
     org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:800)
     org.apache.jsp._5_jsp._jspService(_5_jsp.java:179)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:133)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:311)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:301)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:248)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
root cause
java.sql.SQLException: General error
     sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6987)
     sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:7115)
     sun.jdbc.odbc.JdbcOdbc.SQLExecute(JdbcOdbc.java:3150)
     sun.jdbc.odbc.JdbcOdbcPreparedStatement.execute(JdbcOdbcPreparedStatement.java:214)
     sun.jdbc.odbc.JdbcOdbcPreparedStatement.executeUpdate(JdbcOdbcPreparedStatement.java:136)
     org.apache.jsp._5_jsp._jspService(_5_jsp.java:121)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:133)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:311)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:301)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:248)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
Pls Help me

Thanks for the reply buddy...
As per your reply....I have tried modifying my Preparedstatement properly with ? and then binding values...
But even after doing this i am still getting the same error....
I am clueless...
Following is my modified Prepared Statement ::
conn.prepareStatement(("Insert into MGX (BTS_ID,MGX_Num,Port_No,FRSM_No,RPM_Card,Multi_Link,Port_Status) values (?,?,?,?,?,?,?)"));
stmt1.setInt(1,Integer.parseInt(request.getParameter("bts1")));
stmt1.setInt(2,Integer.parseInt(request.getParameter("allocMgxId")));
stmt1.setInt(3,Integer.parseInt(request.getParameter("allocPortNo")));
stmt1.setInt(4,Integer.parseInt(request.getParameter("allocFrsmSlotNo")));
stmt1.setInt(5,Integer.parseInt(request.getParameter("allocRpmNo")));
stmt1.setInt(6,Integer.parseInt(request.getParameter("allocMultiLinkNo")));
stmt1.setString(7,"Allocated");
Awaiting for a solution....

Filesystem Restore is getting failed "NDMP server reported a general error"

When i performing filesystem restore to different location, its getting failed with the error message "NDMP server reported a general error (name not found?)" whereas restoring
in the same location is getting success without any error.
Please find the attached transcript output for the failed job with debug on.
ob>catxcr -fl0 admin/80
2012/09/04.13:17:33 ______________________________________________________________________
2012/09/04.13:17:33
2012/09/04.13:17:33 Transcript for job admin/80 running on backup-server
2012/09/04.13:17:33
2012/09/04.13:17:33 (amh) qdv__automount_in_mh entered
2012/09/04.13:17:33 (amh) qdv__automount_in_mh tape at 2012/09/04.13:17:33, flags 0x100
2012/09/04.13:17:33 (amh) mount volume options list contains:
2012/09/04.13:17:33 (amh) vtype 1 (rd), vid DC-ORCL-MF-000001, vs_create 1346566310, family (null), retain (null), size 0,
mediainfo 2, scratch 0
2012/09/04.13:17:34 (amh) don't preserve previous mh automount state
2012/09/04.13:17:34 (gep) getting reservation for element 0x1 (dte)
2012/09/04.13:17:34 (una) unload_anywhere entered
2012/09/04.13:17:34 (fal) find_and_load entered
2012/09/04.13:17:34 (fal) calling find_vid2 for volume DC-ORCL-MF-000001
2012/09/04.13:17:34 (fal) find_vid2 worked - volume DC-ORCL-MF-000001 in se11 (not in drive)
2012/09/04.13:17:34 (fal) moving volume FL-MF-000001 from se11 to dte1 (tape)
2012/09/04.13:18:12 (fal) load of tape worked; returning to do automount
2012/09/04.13:18:12 (fal) find_and_load exited
2012/09/04.13:18:12 (atv) qdv__automount_this_vol entered
2012/09/04.13:18:12 (atv) calling qdv__mount
2012/09/04.13:18:12 (mt) qdv__read_mount_db() succeeded, found vol_oid 0
2012/09/04.13:18:20 (mt) qdv__read_label() succeeded; read 65536 bytes
2012/09/04.13:18:20 (mt) exp time obtained from label
2012/09/04.13:18:20 (mt) qdb__label_event() returned vol_oid 137
2012/09/04.13:18:20 (mt) setting vol_oid in mount_info to 137
2012/09/04.13:18:20 (mt) updated volume close time from db
2012/09/04.13:18:20 (atv) qdv__mount succeeded
2012/09/04.13:18:20 (atv) automount worked
2012/09/04.13:18:20 (atv) qdv__automount_this_vol exited
2012/09/04.13:18:20 (gep) getting reservation for element 0x1 (dte)
2012/09/04.13:18:20 (amh) 0 automount worked - returning
2012/09/04.13:18:20 (amh) end of automount at 2012/09/04.13:18:20 (0x0)
2012/09/04.13:18:20 (amh) returning from qdv__automount_in_mh
2012/09/04.13:18:20 Info: volume in tape is usable for this operation.
13:18:20 OBTR: obtar version 10.4.0.1.0 (Solaris) -- Fri Sep 23 23:41:16 PDT 2011
Copyright (c) 1992, 2011, Oracle. All rights reserved.
13:18:20 OBTR: obtar -Xjob:admin/80 -Xob:10.4 -xOz -Xbga:admin/80 -JJJJv -y /usr/tmp/[email protected] -Xrdf:admin/80 -e DC-ORCL-
MF-000001 -F3 -f tape -Xrescookie:0xBE1A8F2 -H client01 -u
13:18:20 RRDF: restore "/wdn/file01" as "/restore", pos 000043290003
13:18:20 OBTR: running as root/root
13:18:20 OBTR: record storage set to internal memory
13:18:20 ATAL: reserved drive tape, cookie 0xBE1A8F2
13:18:20 OBTR: obsd=1, is_job=1, is_priv=0, os=3
13:18:20 OBTR: rights established for user admin, class admin
13:18:20 SUUI: user info root/root, ??/??
13:18:21 MAIN: using blocking factor 128 from media defaults/policies
13:18:21 STTY: background terminal I/O or is a tty
13:18:21 MAIN: interactive
13:18:21 DOLM: nop (for tape (raw device "/dev/obt1"))
13:18:21 DOLM: ok
13:18:22 RLE: connecting to volume/archive database host
13:18:22 RLE: device tape (raw device "/dev/obt1")
13:18:22 RLE: mount_info is valid
13:18:22 RLE: qdb__device_spec_se reports vol_oid 0, arch_oid 0
13:18:22 A_O: using max blocking factor 128 from media defaults/policies
13:18:22 A_O: tape device is local
13:18:22 A_O: Devname: HP,Ultrium 4-SCSI,H61W
13:18:22 Info version: 11
13:18:22 WS version: 10.4
13:18:22 Driver version: 10.4
13:18:22 Max DMA: 2097152
13:18:22 Blocksize in use: 65536
13:18:22 Query frequency: 134217728
13:18:22 Rewind on close: false
13:18:22 Can compress: true
13:18:22 Compression enabled: true
13:18:22 Device supports encryption: true
13:18:22 8200 media: false
13:18:22 Remaining tape: 819375104
13:18:22 A_GB: ar_block at 0x100352000, size=2097152
13:18:22 A_GB: ar_block_enc at 0x100554000, size=2097152
13:18:22 ADMS: reset library tape selection state
13:18:22 ADMS: reset complete
13:18:22 GLMT: returning "", code = 0x0
13:18:22 VLBR: from chk_lm_tag: "", code = 0x0
13:18:22 VLBR: tag on label just read: ""
13:18:22 VLBR: master tag now ""
13:18:22 RLE: noticed volume TEST-MF-000001, file 1, section 1, vltime 1346566310, vowner root, voltag
13:18:22 RLE: qdb__noticed_se reports vol_oid 137, arch_oid 369
(alv) backup image label is valid, file 1, section 1
(ial) invalidate backup image label (was valid)
13:18:22 RSMD: rewrote mount db for tape
13:18:22 ULVI: set mh db volume id "DC-ORCL-MF-000001" (retid ""), volume oid 137, code 0
13:18:22 ULTG: set mh db tag "" (retid "DC-ORCL-MF-000001"), volume oid 137, code 0
13:18:22 CALE: created backup section oid list entry for oid 369
13:18:22 PF: here's the label at the current position:
Volume label:
Intro time: Fri May 04 13:35:03 2012
Volume UUID: d40ea6c6-d6c2-102f-bf51-da716418c062
Volume ID: TEST-MF-000001
Volume sequence: 1
Volume set owner: root
Volume set created: Sun Sep 02 11:56:50 2012
Volume set closes: Sat Dec 01 11:56:50 2012 (no writes after this time)
Volume set expires: Sat Mar 02 11:56:50 2013
Media family: TEST-MF
Original UUID: d40ea6c6-d6c2-102f-bf51-da716418c062
Archive label:
File number: 1
File section: 1
Owner: root
Client host: client01
Backup level: 0
S/w compression: no
Archive created: Sun Sep 02 11:56:50 2012
Archive owner UUID: f32ac938-6410-102f-a3d5-b94c4468403b
Owner class UUID: f32a3504-6410-102f-a3d5-b94c4468403b
Encryption: off
Searching tape for requested file. Please wait...
13:18:22 PF: spacing forward 2 FMs
13:18:24 VLBR: not at bot: 0x90000000
13:18:24 VLBR: tag on label just read: ""
13:18:24 VLBR: master tag now ""
13:18:24 RLE: noticed volume TEST-MF-000001, file 3, section 1, vltime 1346566310, vowner root, voltag
13:18:24 RLE: qdb__noticed_se reports vol_oid 137, arch_oid 380
(alv) backup image label is not valid
13:18:24 ULVI: set mh db volume id "TEST-MF-000001" (retid ""), volume oid 137, code 0
13:18:24 ULTG: set mh db tag "" (retid "DC-ORCL-MF-000001"), volume oid 137, code 0
13:18:24 CALE: created backup section oid list entry for oid 380
13:18:24 VLBR: setting last section flag for backup section oid 369
13:18:24 PF: here's the label at the current position:
Volume label:
Intro time: Fri May 04 13:35:03 2012
Volume UUID: d40ea6c6-d6c2-102f-bf51-da716418c062
Volume ID: TEST-MF-000001
Volume sequence: 1
Volume set owner: root
Volume set created: Sun Sep 02 11:56:50 2012
Volume set closes: Sat Dec 01 11:56:50 2012 (no writes after this time)
Volume set expires: Sat Mar 02 11:56:50 2013
Media family: TEST-MF
Original UUID: d40ea6c6-d6c2-102f-bf51-da716418c062
Archive label:
File number: 3
File section: 1
Owner: root
Client host: client01
Backup level: 0
S/w compression: no
Archive created: Tue Sep 04 11:53:17 2012
Archive owner UUID: f32ac938-6410-102f-a3d5-b94c4468403b
Owner class UUID: f32a3504-6410-102f-a3d5-b94c4468403b
Encryption: off
13:18:24 PF: at desired location
13:18:24 ACFD: positioning (SCSI LOCATE) is available for this device
13:18:24 ADMS: reset library tape selection state
13:18:24 ADMS: reset complete
13:18:24 VLBR: not at bot: 0x90000000
13:18:24 VLBR: tag on label just read: ""
13:18:24 VLBR: master tag now ""
13:18:24 RLE: noticed volume DC-ORCL-MF-000001, file 3, section 1, vltime 1346566310, vowner root, voltag
13:18:24 RLE: qdb__noticed_se reports vol_oid 137, arch_oid 380
(alv) backup image label is not valid
13:18:25 ULVI: set mh db volume id "DC-ORCL-MF-000001" (retid ""), volume oid 137, code 0
13:18:25 ULTG: set mh db tag "" (retid "DC-ORCL-MF-000001"), volume oid 137, code 0
13:18:25 CALE: found existing backup section oid list entry for oid 380
13:18:25 ADMS: reset library tape selection state
13:18:25 ADMS: reset complete
13:18:25 RLE: read volume DC-ORCL-MF-000001, file 3, section 1, vltime 1346566310, vowner root, voltag
13:18:25 RLE: qdb__read_se reports vol_oid 137, arch_oid 380
(alv) backup image label is not valid
13:18:25 ULVI: set mh db volume id "DC-ORCL-MF-000001" (retid ""), volume oid 137, code 0
13:18:25 ULTG: set mh db tag "" (retid "DC-ORCL-MF-000001"), volume oid 137, code 0
13:18:25 PTNI: positioning to "/wdn/file01" at 000043290003
13:18:27 CNPC: data host reports this butype_info:
13:18:27 CNPC: tar (attr 0x2C78: B_DIRECT, R_DIRECT, B_INCR, R_INCR, B_FH_DIR)
13:18:27 CNPC: DIRECT = y
13:18:27 CNPC: HISTORY = y
13:18:27 CNPC: LEVEL = 0
13:18:28 SNP: connection types supported by mover -
13:18:28 tcp
13:18:28 SNP: connection types supported by data service -
13:18:28 tcp
13:18:28 SNP: selected data connection type: tcp
13:18:28 SNP: using separate data and tape/mover connections
13:18:28 SNP: the NDMP protocol version for tape/mover is 4, for data is 4
13:18:28 SNP: backup-server's NDMP tape/mover service session id is 7844
13:18:28 RONPC: begin OSB NDMP data restore
13:18:28 RONPC: need to restore from "/wdn/file01" tree:
13:18:28 RONPC: tape position before restore is 000043290004
13:18:28 MGS: ms.record_size 65536, ms.record_num 0x0, ms.bytes_moved 0x0
13:18:28 RONPC: about to start restore; here are the environment variables:
13:18:28 RONPC: env BEGINTREE=1
13:18:28 RONPC: env NAME=/wdn/file01
13:18:28 RONPC: env AS=/restore
13:18:28 RONPC: env POSLEN=6
13:18:28 RONPC: env POS=
13:18:28 RONPC: env BLEVEL=0
13:18:28 RONPC: env FIRSTCH=1
13:18:28 RONPC: env POS_HERE=1
13:18:28 RONPC: env EX2KTYPE=
13:18:28 RONPC: env DATA_BLOCK_SIZE=64
13:18:28 RONPC: env SKIP_RECORDS=3
13:18:28 RONPC: env LABEL_VERSION=0000012
13:18:28 SMW: setting NDMP mover window to offset 0x0, length 0xFFFFFFFFFFFFFFFF
13:18:28 MLIS: mover listen ok for tcp connection; these addresses were reported:
13:18:28 MLIS: 0.0.0.0:58243
13:18:28 MLIS: 192.168.3.109:58243
13:18:28 RONPC: tape fileno/blockno before restore are 0/0
13:18:28 APNI: a preferred network interface does not apply to this connection
13:18:28 DPNI: load balancing is in use, skipping default PNI
13:18:28 RONPC: directing data service to connect to mover
13:18:01 PPVL: obtar option OB_JOB = admin/80
13:18:01 PPVL: obtar option OB_RB = 10.4
13:18:01 PPVL: obtar option OB_EXTR = 1
13:18:01 PPVL: obtar option OB_EXTRACT_ONCE = 1
13:18:01 PPVL: obtar option OB_DEBUG = 1
13:18:01 PPVL: obtar option OB_DEBUG = 1
13:18:01 PPVL: obtar option OB_DEBUG = 1
13:18:01 PPVL: obtar option OB_DEBUG = 1
13:18:01 PPVL: obtar option OB_VERBOSE = 1
13:18:01 PPVL: obtar option OB_CLIENT = client01
13:18:01 PPVL: obtar option OB_HONOR_IN_USE_LOCK = 1
13:18:01 PPVL: obtar option OB_STAT = 1
13:18:01 PPVL: obtar option OB_VOLUME_LABEL = 1
13:18:01 PPVL: obtar option OB_SKIP_CDFS = 1
13:18:01 PPVL: obtar option OB_DEVICE = tape
13:18:01 PPVL: obtar option OB_BLOCKING_FACTOR = 128
13:18:01 PPVL: obtar option OB_VERIFY_ARCHIVE = no
13:18:01 PPVL: obtar option OB_PQT = 134217728
13:18:01 DSIN: 2GB+ files are supported, 2GB+ directories are supported
13:18:01 SETC: identity is already root/root
13:18:28 qtarndmp__ssl_setup: SSL has been disabled via the security policy
13:18:28 RONPC: issuing NDMP_DATA_START_RECOVER
13:18:33 RONPC: started NDMP restore
13:18:33 MNPO: received NDMP_NOTIFY_DATA_READ, offset 0x0, length 0xFFFFFFFFFFFFFFFF
13:18:33 MNPO: sent corresponding NDMP_MOVER_READ
13:18:33 QTOS: received osb_stats message for job admin/80, kbytes 64, nfiles 0
13:18:33 await_ndmp_event: sending progress update
13:18:33 SPU: sending progress update
Error: Could not make file /restore: Is a directory
13:19:27 MNPO: jumped over filemark fence
13:19:27 VLBR: not at bot: 0x90000000
13:19:27 VLBR: tag on label just read: ""
13:19:27 QTOS: received osb_stats message for job admin/80, kbytes 3145856, nfiles 0
13:19:27 VLBR: master tag now ""
13:19:27 RLE: set kb remaining to 819375104
13:19:27 RLE: qdb__set_kb_rem_se reports vol_oid 0, arch_oid 0
13:19:27 RLE: noticed nil label
13:19:27 RLE: qdb__noticed_se reports vol_oid 0, arch_oid 0
13:19:27 VLBR: setting last section flag for backup section oid 380
13:19:27 MNPO: sent successful mover close
13:19:27 MNPO: data service halted with reason=internal error
13:19:27 SNPD: Data Service reported bytes processed 0xC0020000
13:19:27 SNPD: stopping NDMP data service (to transition to idle state)
13:19:27 MNPO: mover halted with reason=connection closed
13:19:27 MGS: ms.record_size 65536, ms.record_num 0xC002, ms.bytes_moved 0xC0020000
Error: NDMP operation failed: unspecified error reported (see above)
13:19:27 RONPC: finished NDMP restore with status 97
13:19:27 RONPC: NDMP read-ahead positioned tape past filemark; backing up
13:19:27 RONPC: We believe this because initial file # 0 isn't end file # 1
13:19:27 RONPC: the section-relative block number at end of restore is 0x1
13:19:27 RONPC: tape position after restore is 0001032B0080
13:19:27 QREX: exit status upon entry is 97
13:19:27 QREX: released reservation on tape drive tape
13:19:27 RDB: reading volume record for oid 137
13:19:27 RDB: reading section record for oid 369
13:19:27 RDB: adding record for oid 369 (file 1, section 1) to section list
13:19:27 RDB: reading section record for oid 378
13:19:27 RDB: adding record for oid 378 (file 2, section 1) to section list
13:19:27 RDB: reading section record for oid 380
13:19:27 RDB: adding record for oid 380 (file 3, section 1) to section list
13:19:27 RDB: file 1 has all 1 required sections; clearing incomplete backup flags
13:19:27 RDB: reading section record for oid 369
13:19:27 RDB: file 2 has all 1 required sections; clearing incomplete backup flags
13:19:27 RDB: reading section record for oid 378
13:19:27 RDB: file 3 has all 1 required sections; clearing incomplete backup flags
13:19:27 RDB: reading section record for oid 380
13:19:27 RDB: 1 volumes in volume list
13:19:27 RDB: volume oid 137 reports first:last files of 1:3
13:19:27 RDB: marking volume oid 137 as authoritative
13:19:27 VMA: reading volume record for oid 137
13:19:27 RLYX: exit status 97; checking allocs...
13:19:27 RLYX: from mm__check_all: 1
ob> catxcr -fl0 admin/81
2012/09/04.13:19:29 ______________________________________________________________________
2012/09/04.13:19:29
2012/09/04.13:19:29 Transcript for job admin/81 running on backup-server
2012/09/04.13:19:29
2012/09/04.13:19:30 Info: mount data verified.
2012/09/04.13:19:30 Info: volume in tape is usable for this operation.
13:19:31 OBTR: obtar version 10.4.0.1.0 (Solaris) -- Fri Sep 23 23:41:16 PDT 2011
Copyright (c) 1992, 2011, Oracle. All rights reserved.
13:19:31 OBTR: obtar -Xjob:admin/81 -Xob:10.4 -xOz -Xbga:admin/81 -JJJJv -y /usr/tmp/[email protected] -Xrdf:admin/81 -e DC-ORCL-
MF-000001 -F1 -f tape -Xrescookie:0xBE1A8F6 -H client01 -u
13:19:31 RRDF: restore "/wdn/testf" as "/restore", pos 000000010003
13:19:31 OBTR: running as root/root
13:19:31 OBTR: record storage set to internal memory
13:19:31 ATAL: reserved drive tape, cookie 0xBE1A8F6
13:19:31 OBTR: obsd=1, is_job=1, is_priv=0, os=3
13:19:31 OBTR: rights established for user admin, class admin
13:19:31 SUUI: user info root/root, ??/??
13:19:31 MAIN: using blocking factor 128 from media defaults/policies
13:19:31 STTY: background terminal I/O or is a tty
13:19:31 MAIN: interactive
13:19:31 DOLM: nop (for tape (raw device "/dev/obt1"))
13:19:31 DOLM: ok
13:19:32 RLE: connecting to volume/archive database host
13:19:32 RLE: device tape (raw device "/dev/obt1")
13:19:32 RLE: mount_info is valid
13:19:32 RLE: qdb__device_spec_se reports vol_oid 0, arch_oid 0
13:19:32 A_O: using max blocking factor 128 from media defaults/policies
13:19:32 A_O: tape device is local
13:19:32 A_O: Devname: HP,Ultrium 4-SCSI,H61W
13:19:32 Info version: 11
13:19:32 WS version: 10.4
13:19:32 Driver version: 10.4
13:19:32 Max DMA: 2097152
13:19:32 Blocksize in use: 65536
13:19:32 Query frequency: 134217728
13:19:32 Rewind on close: false
13:19:32 Can compress: true
13:19:32 Compression enabled: true
13:19:32 Device supports encryption: true
13:19:32 8200 media: false
13:19:32 Remaining tape: 819375104
13:19:32 A_GB: ar_block at 0x100352000, size=2097152
13:19:32 A_GB: ar_block_enc at 0x100554000, size=2097152
13:19:32 ADMS: reset library tape selection state
13:19:32 ADMS: reset complete
13:19:35 ACFD: positioning (SCSI LOCATE) is available for this device
13:19:35 GLMT: returning "", code = 0x0
13:19:35 VLBR: from chk_lm_tag: "", code = 0x0
13:19:35 VLBR: tag on label just read: ""
13:19:35 VLBR: master tag now ""
13:19:35 RLE: noticed volume DC-ORCL-MF-000001, file 1, section 1, vltime 1346566310, vowner root, voltag
13:19:35 RLE: qdb__noticed_se reports vol_oid 137, arch_oid 369
(alv) backup image label is valid, file 4, section 1
(ial) invalidate backup image label (was valid)
13:19:35 RSMD: rewrote mount db for tape
13:19:35 ULVI: set mh db volume id "DC-ORCL-MF-000001" (retid ""), volume oid 137, code 0
13:19:35 ULTG: set mh db tag "" (retid "DC-ORCL-MF-000001"), volume oid 137, code 0
13:19:35 CALE: created backup section oid list entry for oid 369
13:19:35 PF: here's the label at the current position:
Volume label:
Intro time: Fri May 04 13:35:03 2012
Volume UUID: d40ea6c6-d6c2-102f-bf51-da716418c062
Volume ID: DC-ORCL-MF-000001
Volume sequence: 1
Volume set owner: root
Volume set created: Sun Sep 02 11:56:50 2012
Volume set closes: Sat Dec 01 11:56:50 2012 (no writes after this time)
Volume set expires: Sat Mar 02 11:56:50 2013
Media family: DC-ORCL-MF
Original UUID: d40ea6c6-d6c2-102f-bf51-da716418c062
Archive label:
File number: 1
File section: 1
Owner: root
Client host: client01
Backup level: 0
S/w compression: no
Archive created: Sun Sep 02 11:56:50 2012
Archive owner UUID: f32ac938-6410-102f-a3d5-b94c4468403b
Owner class UUID: f32a3504-6410-102f-a3d5-b94c4468403b
Encryption: off
13:19:35 PF: at desired location
13:19:35 BT: resid is 1
13:19:35 ACFD: positioning (SCSI LOCATE) is available for this device
13:19:35 ADMS: reset library tape selection state
13:19:35 ADMS: reset complete
13:19:35 GLMT: returning "", code = 0x0
13:19:35 VLBR: from chk_lm_tag: "", code = 0x0
13:19:35 VLBR: tag on label just read: ""
13:19:35 VLBR: master tag now ""
13:19:35 RLE: noticed volume DC-ORCL-MF-000001, file 1, section 1, vltime 1346566310, vowner root, voltag
13:19:35 RLE: qdb__noticed_se reports vol_oid 137, arch_oid 369
(alv) backup image label is not valid
13:19:35 ULVI: set mh db volume id "DC-ORCL-MF-000001" (retid ""), volume oid 137, code 0
13:19:35 ULTG: set mh db tag "" (retid "DC-ORCL-MF-000001"), volume oid 137, code 0
13:19:35 CALE: found existing backup section oid list entry for oid 369
13:19:35 ADMS: reset library tape selection state
13:19:35 ADMS: reset complete
13:19:35 RLE: read volume DC-ORCL-MF-000001, file 1, section 1, vltime 1346566310, vowner root, voltag
13:19:35 RLE: qdb__read_se reports vol_oid 137, arch_oid 369
(alv) backup image label is not valid
13:19:35 ULVI: set mh db volume id "DC-ORCL-MF-000001" (retid ""), volume oid 137, code 0
13:19:36 ULTG: set mh db tag "" (retid "DC-ORCL-MF-000001"), volume oid 137, code 0
13:19:36 PTNI: positioning to "/wdn/testf" at 000000010003
13:19:37 CNPC: data host reports this butype_info:
13:19:37 CNPC: tar (attr 0x2C78: B_DIRECT, R_DIRECT, B_INCR, R_INCR, B_FH_DIR)
13:19:37 CNPC: DIRECT = y
13:19:37 CNPC: HISTORY = y
13:19:37 CNPC: LEVEL = 0
13:19:38 SNP: connection types supported by mover -
13:19:38 tcp
13:19:38 SNP: connection types supported by data service -
13:19:38 tcp
13:19:38 SNP: selected data connection type: tcp
13:19:38 SNP: using separate data and tape/mover connections
13:19:38 SNP: the NDMP protocol version for tape/mover is 4, for data is 4
13:19:38 SNP: backup-server's NDMP tape/mover service session id is 7935
13:19:38 RONPC: begin OSB NDMP data restore
13:19:38 RONPC: need to restore from "/wdn/testf" tree:
13:19:38 RONPC: tape position before restore is 000000010004
13:19:38 MGS: ms.record_size 65536, ms.record_num 0x0, ms.bytes_moved 0x0
13:19:38 RONPC: about to start restore; here are the environment variables:
13:19:38 RONPC: env BEGINTREE=1
13:19:38 RONPC: env NAME=/wdn/testf
13:19:38 RONPC: env AS=/restore
13:19:38 RONPC: env POSLEN=6
13:19:38 RONPC: env POS=
13:19:38 RONPC: env BLEVEL=0
13:19:38 RONPC: env FIRSTCH=1
13:19:38 RONPC: env POS_HERE=1
13:19:38 RONPC: env EX2KTYPE=
13:19:38 RONPC: env DATA_BLOCK_SIZE=64
13:19:38 RONPC: env SKIP_RECORDS=3
13:19:38 RONPC: env LABEL_VERSION=0000012
13:19:38 SMW: setting NDMP mover window to offset 0x0, length 0xFFFFFFFFFFFFFFFF
13:19:38 MLIS: mover listen ok for tcp connection; these addresses were reported:
13:19:38 MLIS: 192.168.3.109:58303
13:19:38 MLIS: 0.0.0.0:58303
13:19:38 RONPC: tape fileno/blockno before restore are 0/0
13:19:38 APNI: a preferred network interface does not apply to this connection
13:19:38 DPNI: load balancing is in use, skipping default PNI
13:19:38 RONPC: directing data service to connect to mover
13:19:11 PPVL: obtar option OB_JOB = admin/81
13:19:11 PPVL: obtar option OB_RB = 10.4
13:19:11 PPVL: obtar option OB_EXTR = 1
13:19:11 PPVL: obtar option OB_EXTRACT_ONCE = 1
13:19:11 PPVL: obtar option OB_DEBUG = 1
13:19:11 PPVL: obtar option OB_DEBUG = 1
13:19:11 PPVL: obtar option OB_DEBUG = 1
13:19:11 PPVL: obtar option OB_DEBUG = 1
13:19:11 PPVL: obtar option OB_VERBOSE = 1
13:19:11 PPVL: obtar option OB_CLIENT = client01
13:19:11 PPVL: obtar option OB_HONOR_IN_USE_LOCK = 1
13:19:11 PPVL: obtar option OB_STAT = 1
13:19:11 PPVL: obtar option OB_VOLUME_LABEL = 1
13:19:11 PPVL: obtar option OB_SKIP_CDFS = 1
13:19:11 PPVL: obtar option OB_DEVICE = tape
13:19:11 PPVL: obtar option OB_BLOCKING_FACTOR = 128
13:19:11 PPVL: obtar option OB_VERIFY_ARCHIVE = no
13:19:11 PPVL: obtar option OB_PQT = 134217728
13:19:11 DSIN: 2GB+ files are supported, 2GB+ directories are supported
13:19:11 SETC: identity is already root/root
13:19:38 qtarndmp__ssl_setup: SSL has been disabled via the security policy
13:19:38 RONPC: issuing NDMP_DATA_START_RECOVER
13:19:43 RONPC: started NDMP restore
13:19:43 MNPO: received NDMP_NOTIFY_DATA_READ, offset 0x0, length 0xFFFFFFFFFFFFFFFF
13:19:43 MNPO: sent corresponding NDMP_MOVER_READ
13:19:43 QTOS: received osb_stats message for job admin/81, kbytes 64, nfiles 0
13:19:43 await_ndmp_event: sending progress update
13:19:43 SPU: sending progress update
/restore
Error: Could not make file /restore: Is a directory
13:19:44 MNPO: jumped over filemark fence
13:19:44 VLBR: not at bot: 0x90000000
13:19:44 VLBR: tag on label just read: ""
13:19:44 QTOS: received osb_stats message for job admin/81, kbytes 51328, nfiles 0
13:19:44 VLBR: master tag now ""
13:19:44 RLE: noticed volume DC-ORCL-MF-000001, file 2, section 1, vltime 1346566310, vowner root, voltag
13:19:44 RLE: qdb__noticed_se reports vol_oid 137, arch_oid 378
(alv) backup image label is not valid
13:19:45 ULVI: set mh db volume id "DC-ORCL-MF-000001" (retid ""), volume oid 137, code 0
13:19:45 ULTG: set mh db tag "" (retid "DC-ORCL-MF-000001"), volume oid 137, code 0
13:19:45 CALE: created backup section oid list entry for oid 378
13:19:45 VLBR: setting last section flag for backup section oid 369
13:19:45 MNPO: sent successful mover close
13:19:45 MNPO: data service halted with reason=internal error
13:19:45 SNPD: Data Service reported bytes processed 0x3220000
13:19:45 SNPD: stopping NDMP data service (to transition to idle state)
13:19:45 MNPO: mover halted with reason=connection closed
13:19:45 MGS: ms.record_size 65536, ms.record_num 0x322, ms.bytes_moved 0x3220000
Error: NDMP operation failed: unspecified error reported (see above)
13:19:45 RONPC: finished NDMP restore with status 97
13:19:45 RONPC: NDMP read-ahead positioned tape past filemark; backing up
13:19:45 RONPC: We believe this because initial file # 0 isn't end file # 1
13:19:45 RONPC: the section-relative block number at end of restore is 0x1
13:19:45 RONPC: tape position after restore is 000003230080
13:19:45 QREX: exit status upon entry is 97
13:19:45 QREX: released reservation on tape drive tape
13:19:45 RDB: reading volume record for oid 137
13:19:45 RDB: reading section record for oid 369
13:19:45 RDB: adding record for oid 369 (file 1, section 1) to section list
13:19:45 RDB: reading section record for oid 378
13:19:45 RDB: adding record for oid 378 (file 2, section 1) to section list
13:19:45 RDB: reading section record for oid 380
13:19:45 RDB: adding record for oid 380 (file 3, section 1) to section list
13:19:45 RDB: file 1 has all 1 required sections; clearing incomplete backup flags
13:19:45 RDB: reading section record for oid 369
13:19:45 RDB: file 2 has all 1 required sections; clearing incomplete backup flags
13:19:45 RDB: reading section record for oid 378
13:19:45 RDB: file 3 has all 1 required sections; clearing incomplete backup flags
13:19:45 RDB: reading section record for oid 380
13:19:45 RDB: 1 volumes in volume list
13:19:45 RDB: volume oid 137 reports first:last files of 1:3
13:19:45 RDB: marking volume oid 137 as authoritative
13:19:45 VMA: reading volume record for oid 137
13:19:45 RLYX: exit status 97; checking allocs...
13:19:45 RLYX: from mm__check_all: 1
ob>
Please help me to resolve the issue...
Thanks,
Sam

If you're restoring a file you have to list it, so if you are restoring /wdn/file01 then you specify the alternate path as /restore/file01
Thanks
Rich

Ichat general error connecting

Similar Messages

Maybe you are looking for