IChat is set to load at Login -- "iChatAgent" always wants sys password???
Downloaded the "Keychain Update" (but, before that, actually brought the keychain back over manually) . . . So, everytime our iMac G5 w/ Leopard re-boots or re-logs-in . . . we have several app's set to load at login . . . there's a pesky little message:
"iChat Agent wants system password" or something like that. What's the iChat Agent? Is there some little file to delete / modify to make this go away!?!
Not a very big deal, but enough for me to post this. Help! And, Thanks!
GO APPLE!!! GO LEOPARD!!! GO VOTE!!!
The username.keychain keychain was the default login keychain in 10.2 (and maybe 10.3?). With Tiger, the default was named login.keychain unless you had the old username.keychain and in that case it would use it. With Leopard, it creates a login.keychain and uses that, no matter what, though it will also unlock and use username.keychain.
Confusing and complex? Yeah, sorta IMO, it's best to just move the old username.keychain aside and maybe just migrate all the relevant keys and certificates to the new login.keychain. An upgrade is a good time for a little system cleanup!
Similar Messages
-
When I tried to open iChat recently (it had been months since I last ran it) it would bounce a few times on the dock and then close. I read that reinstalling ot from the mac install disc might help.
I dragged the old ichat folder from the Applications screen and found the ichat package on the cd and installed it. Now when I open ichat I can get to the screen where I type my aim details and test my video but when I close that window it freezes (pinwheel) and eventually closes. Perhaps I didn't reinstall everythingn that was needed.. either way, here's what the terminal says..
Last login: Mon May 1 19:26:26 on console
Welcome to Darwin!
dylan-montgomerys-powerbook-g4-15:~ dylanmontgomery$ /Applications/iChat.app/Contents/MacOS/iChat -errorLogLevel 7
2006-05-01 20:00:02.202 iChat[599] WARNING: Failed to connect to iChatAgent
200007.506919 Loading hardware rules from hardwarerulesH264-G4.plist
200007.507609 Checking H264 hardware rules
200007.507887 Satisfied rule #4 (30:160x120)
200007.509845 setLocalUserName: Dylan [email protected]
200007.787582 ### NEW STATE: to: VC_INIT, from: VC_INVALID
200007.788715 ### NEW STATE: to: VC_IDLE, from: VC_INIT
200007.789092 ++++++++ confStatusMapRemoveAll
200007.789304 ( ) -- mapUserIDToSecurityInfo cleared --
200007.790976 UPnP init passed
200007.791573 NATTraversal created
200007.792251 QT automatic setting = 1
200007.792565 Bandwidth based on QT prefs = 0
dyld: Symbol not found: _kFZListenerCapAVChatInfo
Referenced from: /System/Library/Frameworks/InstantMessage.framework/iChatAgent.app/Contents/Mac OS/iChatAgent
Expected in: /System/Library/Frameworks/InstantMessage.framework/Versions/A/InstantMessage
2006-05-01 20:00:39.045 iChat[599] WARNING: Failed to connect to iChatAgent
200039.256479 Found 0 cameras:
200039.309941 Microphone devices:
200039.310936 Internal microphone
200039.311322 Line In
200039.317370 Selected mic: Built-in Audio / imic
200039.318191 No camera found.
200039.319050 Selected microphone is Internal microphone.
200039.319656 Microphone: callback thread: STANDARD; EXTENDED timeshare: 0; PRECEDENCE importance: 17
200039.320434 Microphone: null device thread: STANDARD; EXTENDED timeshare: 0; PRECEDENCE importance: 17
200039.327063 Selected mic: Built-in Audio / imic
200039.328094 startPreview returned 0
200039.331241 BWD: cache: '[82.110.46.22:255.255.255.0]' != '[82.110.46.52:255.255.255.0]'
200039.331707 BWD: Launching thread to determine focus capability based on bandwidth.
200039.443561 QT automatic setting = 1
200039.444246 BWD: Using QuickTime value: 0
200039.444577 BWD bandwidth: 0 kbits up, 0 kbits down.
200039.444805 videoNetworkCapable: 0 -- 0 max participants.
200039.445012 audioNetworkCapable: 0 -- 0 max participants.
200039.445274 vcCapabilities returns: 0x00000007
200039.445530 VCCapAudio
200039.445742 VCCapVideo
200039.445951 VCCapMultiAudio
200039.446151 Found 0 cameras:
200039.526049 cancelPreview returned 0
dyld: Symbol not found: _kFZListenerCapAVChatInfo
Referenced from: /System/Library/Frameworks/InstantMessage.framework/iChatAgent.app/Contents/Mac OS/iChatAgent
Expected in: /System/Library/Frameworks/InstantMessage.framework/Versions/A/InstantMessage
200042.333080 Using cached BWD Configuration Data: snatmap.mac.com:16384 - count: 20
200042.333306 Connect to bwd server:17/20 from configuration file.
200042.335648 BWD_GetBandwidth: SendRequest (from :16389)
200042.585799 BWD_GetBandwidth: SendRequest (from :16389)
200042.835974 BWD_GetBandwidth: SendRequest (from :16389)
200043.086148 BWD_GetBandwidth: SendRequest (from :16389)
200043.337034 BWD_GetBandwidth: GotResponse
200043.337666 BWD_Get: signal failed
200043.337987 BWD GetBW failed.
200043.338421 GotBandwidth: 0/0 (up/down) @
200043.338648 BWD bandwidth: 0 kbits up, 0 kbits down.
200043.338826 videoNetworkCapable: 0 -- 0 max participants.
200043.338978 audioNetworkCapable: 0 -- 0 max participants.
200043.339267 Focus Capability (after BWD):
200043.339485 audioHardwareCapable = 1
200043.339642 maxAudioParticipantsBasedOnHardware = 9
200043.339783 audioNetworkCapable = 0
200043.339917 maxAudioParticipants = 0
200043.340048 canBeAudioMultipointParticipant = 1
200043.340178 videoHardwareCapable = 0
200043.341436 maxVideoParticipantsBasedOnHardware = 3
200043.341740 videoNetworkCapable = 0
200043.341922 maxVideoParticipants = 0
200043.342073 canBeVideoMultipointParticipant = 1
200043.342210 detectedUpstreamKbits = 0
200043.342343 detectedDownstreamKbits = 0
200043.342514 Sending VCCapabilitiesDidChangeNotification
2006-05-01 20:01:10.084 iChat[599] WARNING: Failed to connect to iChatAgent
2006-05-01 20:01:10.084 iChat[599] WARNING: Service: couldn't connect to iChatAgent, not enabling any of its services.
200110.084730 Found 0 cameras:
200110.085127 BWD: cache: '[82.110.46.22:255.255.255.0]' != '[82.110.46.52:255.255.255.0]'
200110.085505 QT automatic setting = 1
200110.085535 BWD: Using QuickTime value: 0
200110.085558 BWD bandwidth: 0 kbits up, 0 kbits down.
200110.085569 videoNetworkCapable: 0 -- 0 max participants.
200110.085578 audioNetworkCapable: 0 -- 0 max participants.
200110.085698 vcCapabilities returns: 0x00000007
200110.085723 VCCapAudio
200110.085731 VCCapVideo
200110.085738 VCCapMultiAudio
dyld: Symbol not found: _kFZListenerCapAVChatInfo
Referenced from: /System/Library/Frameworks/InstantMessage.framework/iChatAgent.app/Contents/Mac OS/iChatAgent
Expected in: /System/Library/Frameworks/InstantMessage.framework/Versions/A/InstantMessage
2006-05-01 20:01:40.360 iChat[599] WARNING: Failed to connect to iChatAgent
2006-05-01 20:01:40.361 iChat[599] WARNING: Service: couldn't connect to iChatAgent, not enabling any of its services.
dyld: Symbol not found: _kFZListenerCapAVChatInfo
Referenced from: /System/Library/Frameworks/InstantMessage.framework/iChatAgent.app/Contents/Mac OS/iChatAgent
Expected in: /System/Library/Frameworks/InstantMessage.framework/Versions/A/InstantMessage
2006-05-01 20:02:10.595 iChat[599] WARNING: Failed to connect to iChatAgent
2006-05-01 20:02:10.595 iChat[599] WARNING: Service: couldn't connect to iChatAgent, not enabling any of its services.
dyld: Symbol not found: _kFZListenerCapAVChatInfo
Referenced from: /System/Library/Frameworks/InstantMessage.framework/iChatAgent.app/Contents/Mac OS/iChatAgent
Expected in: /System/Library/Frameworks/InstantMessage.framework/Versions/A/InstantMessage
2006-05-01 20:02:41.015 iChat[599] WARNING: Failed to connect to iChatAgent
2006-05-01 20:02:41.015 iChat[599] WARNING: Service: couldn't connect to iChatAgent, not enabling any of its services.
2006-05-01 20:02:41.016 iChat[599] * -[NSCFString menu]: selector not recognized [self = 0x52cfe0]
Segmentation fault
dylan-montgomerys-powerbook-g4-15:~ dylanmontgomery$
=================================================
Thanks for any help
Powerbook G4 15" 1.67 Mac OS X (10.4.6) iChat 3I just realized this is the same problem as:
http://discussions.apple.com/thread.jspa?threadID=461310&tstart=15
I'll try those and see how they work. -
I need help with resetting my ichat. When i try to login now it wont let me... it says "AOL Instant Messenger password" and then "iChat can't log in to ... because your login ID or password is incorrect. How do I reset this if I cant log in? When I try to press online the same thing pops up and I have no way of logging in or asking for help.
Hi,
iChat (it would help to know which version) can accept Apple IDs as valid AIM Screen Names.
However if you have iChat 5 or earlier you cannot use ones ending in @me.com or @icloud.com issued by iCloud. (they can be used in iChat 6 or Messages as these versions make a double login to AIM and Apple to allow the use of the password).
In addition if you are using an Apple ID for an AIM Screen Name the password still needs to keep to the 16 character limit that AIM has.
AN @mac.com name can be used on any version of iChat (Until the 30th June 2014)
As it does not need a double check with Apple you can use it to log in to the AIM Web pages
Login here with an AIM Name registered at AIM or and @mac.com name and see if you get any suspended account messages.
Sometimes account can be suspended. Usually because something has triggered the "Unusual Activity" item.
About a year ago many @mac.com users that travelled out of their own country found themselves suspended when they got home.
If the Name checks out of if an Apple ID the password in known to be 16 characters or Less then do this:-
In Lion upwards open a Finder Window and use the Go Menu whilst holding down the ALT key.
Select the Library that appears in the menu list.
Navigate to Preferences.
(If you have version earlier than Lion the just navigate to ~/Library/Preferences (that's the Library in you Home - Little House icon - folder)
Fnd com.apple.ichat.aim.plist (even if you are using Messages)
Drag the file to the Trash and Restart the app.
7:39 pm Thursday; May 29, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
I need to know how to set up one password for loging into my administrator account and then another for making changes to the account. Basically I want different passwords for login and admin. I already know about the different users accounts and how to set those up. I am not interested in creating a new user account. I want to be able to use one account on the computer and have one password for the login and then a different password for the administative.
Even if you could have two passwords for a single account (which you can't) I'm not sure what advantage would be over just having a normal user account and an administrative account. It's certainly a security best practice on any operating system (Mac, Windows, Linux) to use your computer as an unprivlidged (normal) user account and have a completely separate account with administrative rights that you can use for updates, etc. It's for the same separation of privlidge reasons that normal user accounts are not in the "sudoers" file either.
So, I'd recommend not trying to reinvent the wheel here. Mac OS already does such a great job of automatically prompting you when an administrative privlidge escalation is needed for settings, updates, or installations. If you really need administrative rights all of the time then you might just want to make your normal account an administrator. This is not the best idea but if you are carefull to keep Gatekeeper settings enabled on your Mac, not allow Java in the browser, and just be careful in general on the web, then you can still stay fairly safe on a well updated Mac.
The other benefit to having a separate administrative account is that if your normal user account ever becomes corrupted you can log into the administrative account to solve the issue.
Hope this opinion helps you decide how to proceed. -
My itunes account was disabled for some reason. I changed password in iforgot and still didn't work. I could log in and see my music but not make purchases from the store or even redeem an itunes gift card so I set up a new login/account with another email account of mine. On the new account I can redeem my gift card and download items onto my ipad2. Is there any way to move my music to the new account?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
Clients running OS 10.4.6 on older iMac (slot loading) cannot login
Clients running OS 10.4.6 on older iMac (slot loading) cannot login. I get:
“Logging into the account failed because an error occurred. The home folder for the user account is located on an AFP or SMB server. Contact your system administrator for help."
I have eMacs and iBooks on this network running 10.4.6 and they have no problem. Also the iMacs running 10.3.9 have no problem. Since it’s machine and OS specific I’m wondering if it’s an incompatibility problem. The iMacs have the latest firmware on them. The server is a G5 running 10.4.6 server, DNS and DHCP are setup correctly and the share points are setup correctly.Try resetting the PMU/SMU and PRAM/NVRAM. You'd need to identify the mode of resetting depending on the model of your G5 iMac. The Apple support sites that would help you for this are –
http://support.apple.com/kb/HT1436
http://support.apple.com/kb/HT1939
http://support.apple.com/kb/HT1767
http://support.apple.com/kb/HT1379
I hope this solves your problem. -
How do I stop Adobe Bridge, Excel, Word and Adobe Photo Downloader from loading at startup under Mac OS 10.7.1, they are not loaded in login items.
When you shut down this window appears.
Uncheck the reopen box and it should stop this from happening -
Issues loading the login site of my ISP
When I first power on my modem, I must log into the ISPs page before I can surf the net. This has worked fine for me up until about 2 months ago. Since then, when I get redirected to the login page, it either fails to load, or takes an age to do so (3-5mins).
This happened around the time 3.6.2 was released, but I'm unsure if it was exactly after I upgraded.
Firefox on the mac, and PC, on multiple machines exhibit the issue. Running Safari, Chrome or IE, the page loads instantly. Once logged in I can use Firefox without an issue, even loading the login page again should I choose, it loads the page instantly.
Finally the ISP came back to me, requesting me to disable the validation of certificates (under tools, options, advanced, validation, uncheck all), and re-enabling it after I've logged in.
This does appear to resolve the issue, but I'm wondering why this is the case, and why only Firefox is affected.
It's a right PITA to have to launch another browser to log in, then switch back to FF. It's even worse having to disable the validation check and re-enable it afterwards.
Any ideas what could be causing this behaviour?
== URL of affected sites ==
https://broadband.mobileone.net.sg/login/* "Clear the Cache": Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Firefox > Preferences > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]] -
Setting External Loaded SWF dimension
hi guys...,
i'll be straight to point,well i'm now working on a project using action script 3 now what i'm trying to make is a Main SWF that load whatever other swf into it the tricky thing is that i used 1 xml document read the external swf source and it's setting(such as it's x,y position and it's width and height) and i'm having problem setting the loaded swf width and height btw it's an desktop application and not a website application.,
here is my code:
//variable list
var swfList:XMLList; //hold all the zone list from the xml
var totalZone:uint; //total of zone there is in the xml
var myURLLoader:URLLoader = new URLLoader();
var swf:Movie Clip;//hold the loaded swf
var swfLoader:Loader = new Loader();//loader instance used to load the external swf
var myCounter:uint = 0;
//load the xml file
myURLLoader.load(new URLRequest('myXMLFile.xml'));
myURLLoader.addEventListener(Event.COMPLETE, processXML, false, 0, true);
function processXML(e:Event):void
removeEventListener(Event.COMPLETE, processXML);
XML.ignoreWhitespace= true;
var myXML:XML = new XML(e.target.data);
swfList = myXML.SWF;
totalSWF = myXML.SWF.length();
loadSWF();
function loadSWF():void
swfLoader.contentLoaderInfo.addEventListener(Event.INIT, swfSetting);
swfLoader.load(new URLRequest(swfList[myCounter].@source));
function swfSetting(e:Event):void
//making new instance of sprite to hold the new loaded swf
swf = new MovieClip();
//casting the loader content into a movieclip
swf = e.target.content;
addChild(swf);
swfLoader.unload();
swf.x = swfList[myCounter].@left;
swf.y = swfList[myCounter].@top;
swf.width= swfList[myCounter].@width;
swf.height= swfList[myCounter].@height;
addChild(swf);
if(myCounter < totalSWF)
myCounter++;
trace('myCounter: ' + myCounter );
loadSWF();
and here is what the result ( it make the width and height of the loaded swf to 0):
swfLoader.contentLoaderInfo.width : 320
swfLoader.contentLoaderInfo.height : 240
module: MyVideo/flvplayer.swf
x:0
x container:0
y:0
y container:0
xml width:550
width container:0
xml height:400
height container:0
myCounter: 1
swfLoader.contentLoaderInfo.width : 550
swfLoader.contentLoaderInfo.height : 400
module: AnalogueClock.swf
x:50
x container:50
y:0
y container:0
xml width:250
width container:250
xml height:200
height container:200
myCounter: 2
swfLoader.contentLoaderInfo.width : 800
swfLoader.contentLoaderInfo.height : 30
module: MyNewsticker/newsticker.swf
x:0
x container:0
y:0
y container:0
xml width:300
width container:0
xml height:50
height container:0
most of my loaded swf beside the analouge clock is full action script code and in case of the analouge clock it is a swf that has a movie clip on it's stage (the other are fully created from action script 3.0)
please do help me..,
cause i'm already really desperate and going crazy by this problem..,sorry i copied the code from the other swf i used to do try and error test..,
basically the container is the same as swf varibale
here the code so you would'nt get confused:
//variable list
var swfList:XMLList; //hold all the zone list from the xml
var totalZone:uint; //total of zone there is in the xml
var myURLLoader:URLLoader = new URLLoader();
var swf:Movie Clip;//hold the loaded swf
var swfLoader:Loader = new Loader();//loader instance used to load the external swf
var myCounter:uint = 0;
//load the xml file
myURLLoader.load(new URLRequest('myXMLFile.xml'));
myURLLoader.addEventListener(Event.COMPLETE, processXML, false, 0, true);
function processXML(e:Event):void
removeEventListener(Event.COMPLETE, processXML);
XML.ignoreWhitespace= true;
var myXML:XML = new XML(e.target.data);
swfList = myXML.SWF;
totalSWF = myXML.SWF.length();
loadSWF();
function loadSWF():void
swfLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, swfSetting);
swfLoader.load(new URLRequest(swfList[myCounter].@source));
function swfSetting(e:Event):void
//making new instance of sprite to hold the new loaded swf
swf = new MovieClip();
//casting the loader content into a movieclip
swf = e.target.content;
addChild(swf);
swfLoader.unload();
swf.x = swfList[myCounter].@left;
swf.y = swfList[myCounter].@top;
swf.width= swfList[myCounter].@width;
swf.height= swfList[myCounter].@height;
addChild(swf);
if(myCounter < totalSWF)
myCounter++;
trace('myCounter: ' + myCounter );
loadSWF();
well in my code i did cast the loader into a movie clip and then set it's width and heigt,right???
wouldn't it just give me the same result??
if it's not can u describe what u mean in more detail??
some example about accessing the loader content would be really appreciated -
Revision: 11139
Author: [email protected]
Date: 2009-10-26 03:02:38 -0700 (Mon, 26 Oct 2009)
Log Message:
Extending class with a 'processLoadingState' stub, invoked when load state is set to LOADING.
Modified Paths:
osmf/trunk/framework/MediaFramework/org/osmf/media/LoadableMediaElement.asStrobe was used to verify that the problem was not with my OSMF implementation. Since the results were the same, I am more supsicious of OSMF itself or the underlying AIR framework than the player implementation. Either way, the information I've seen says that progressive download of h.264 video is supported on mobile devices with AIR. It would appear that this is not true in all cases.
The issue has not been observed on not occur on the desktop. It only occurs with StageVideo enabled playback with autoplay on.
In the actual product the videos play one at a time. Once the user has finished with a video, the player clears the references to the media. These are OSMF calls; the media assigned to the player is nulled. If this is not sufficient for garbage collection, then I am at a loss as to how to proceed. My test uses four videos that are roughly 1 MB. If there is a memory use problem, then it would appear something is broken in AIR or OSMF.
I want to be sure I report this correctly. The code involved is more than a snippet, it's a media player designed to be embedded in an app. Do I need to include the complete implementation or will a description be sufficient? -
DTP error: Lock NOT set for: Loading master data attributes
Hi,
I have a custom datasource from ECC which loads into 0CUST_SALES. I'm using DTP & transformation which has worked for loading data in the past for this infoobject. The infopackage loads with a green status but when i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes". I've tried reactivating everything but it didn't help. Does anyone know what this error means? We're on SP7. Thanks in advance!Hello Catherine
I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
Fix#2: by a faster server (by faster, I mean more CPU power)
Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
Good luck!
Ioan -
A nice easy one here, hopefully...
I am running Mac OSX 10.5.7 and I have installed some software which loads every time I boot up. I have found the System Preference that allows you to edit the programmes which load at login and I have removed all the unwanted ones, but there is still another programme which loads any way. In the dock, I have right clicked to turn off "Open at Login" but it isn't checked anyway.
So my question is, without having to uninstall this programme, how do I stop it loading every time I turn my mac on?
And in a related way, whenever I run iTunes, it runs the Last.FM programme and I cannot seem to stop it doing that either. Any ideas?
Many thanks
DaveItems that launch on startup are controlled by launchd via launchctl. Items that should start at launch have a plist in either /Library/LaunchDaemons/ or /Library/LaunchAgents/ or in the same folders in your user/Library/ folder. An old method used the StartupItems folder in the /Library folders.
Check in those folders for a file named in reverse domain name based on the company that created Last.FM. It probably has LastFM in the name, but I don't have it so I don't know what it is named.
I just took a look at the program (I think) and it probably installs an iTunes Plugin, so search in those folders in the Library, also.
Message was edited by: Barney-15E -
Since upgrading from Lion to Mountain Lion, when I login 1 of 2 disk images I have set to open on login does not mount. It worked under Lion. Stickies opens just fine. The disk images are sparse disk bundles. Are there any suggested remedies? I have already tried repairing permissions. One interesting thing is that previously in LIon, the disk images were just sparse images, not sparse bundles. I switched to bundles after reading that Time Machine backups of sparse bundles would not copy the entire image, only the changed parts. The sprase images are for sharing of photo and iTUnes libraries among multiple family member on the same computer.
If it is working as expected, what do you need with the old backup?
If you want to be able to go back to where you were prior to an upgrade, isolate that backup and don't use it again. As far as Time Machine can tell, the whole drive changed.
The link I posted contains probably everything that anybody knows about Time Machine and how to manipulate it to work as you would like as opposed to how it was designed to work. There are FAQs to continue a backup as opposed to starting fresh, but I wouldn't recommend it for the reasons above. Pondini probably doesn't, either.
If you are going to do a wholesale upgrade of the OS, I would create a bootable clone using something like Carbon Copy Cloner or Super Duper. A bootable clone on an external drive can have you back up and running instantly if the upgrade fails in any way. If the upgrade goes fine, store it away in case you find the current system isn't to your liking. -
My MacBook Air keeps hanging on Desktop and Screen Saver of System Preference Setting indicating "Loading Photos".
Why is that ???Welcome to the Apple Support Communities
Open Finder, select Go > Go to Folder, type ~/Library/Preferences and delete com.apple.desktop.plist -
It keeps loading when login into Secure Global Desktop
It keeps loading when login into Secure Global Desktop
Configurations listed below:
OS: Windows 7
Java:6Hi Frank,
It happened when attending labs exercise in oracle ADF training .The labs needs the SGD to first login.
Regards.
Maybe you are looking for
-
Windows 7 machine can't find a driver for my laserjet 1200 PCL networked ...
... thru an XP Pro machine. How do I resolve this? Every other computer in the house...running XP or Vista...can access this printer. Why not my new Toshiba laptop? Jim Baker [email protected]
-
Logical Standby Database Not Getting Sync With Primary Database
Hi All, I am using a Primary DB and Logical Standby DB configuration in Oracle 10g:- Version Name:- SQL> select * from v$version; BANNER Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi PL/SQL Release 10.2.0.5.0 - Production CORE 10.2
-
Video resolution is not compatible on Samsung 913 monitor, VGA connection
This system worked fine for over 6 months. Suddenly, I got this video compatible issue. What is the simplest way to check the status of the 16M ATI video card? I can ping the system from a Window XP here. Should I use Apple HARDWARE test CD here or d
-
hi my friends I want to know I can use labview FPGA with nexys 2 and there are some device about this FPGA (nexys 2) because we have this circuit board and we want to do the project with labview you can found some information about nexys 2 in this fi
-
HT4759 how to share photo in my pc via icloud
Q1: Installed icloud in my PC and add pics in the folder. How to sync between pc & ipad? Q2: Can I create iff. photo album in icloud and sync to ipad? Tks for your teaching!!!!