IChat is waiting on identity check

When starting IChat (i am using a jabber account) then i got a jabber list saying waiting on identity check.
I have tried a lot of changes but i don't cannot IChat ad all.
Can someone give me some advice what to do ?
As router i use CopperJet 816-2P
Thank you for answering,
Peter.

Hi Ralph,
The latest IChatConnectError list show as below:
Date/Time: 2010-03-01 22:25:45.904 +0100
OS Version: 10.5.8 (Build 9L30)
Report Version: 4
iChat Connection Log:
2010-03-01 22:25:13 +0100: AVChat started with ID 646873343.
2010-03-01 22:25:13 +0100: 0x18caf5d0: State change from AVChatNoState to AVChatStateWaiting.
2010-03-01 22:25:13 +0100: pppettterrr19565: State change from AVChatNoState to AVChatStateInvited.
2010-03-01 22:25:22 +0100: 0x18caf5d0: State change from AVChatStateWaiting to AVChatStateConnecting.
2010-03-01 22:25:22 +0100: pppettterrr19565: State change from AVChatStateInvited to AVChatStateConnecting.
2010-03-01 22:25:33 +0100: 0x18caf5d0: State change from AVChatStateConnecting to AVChatStateEnded.
2010-03-01 22:25:33 +0100: 0x18caf5d0: Error -8 (Did not receive a response from 0x18caf5d0.)
2010-03-01 22:25:33 +0100: pppettterrr19565: State change from AVChatStateConnecting to AVChatStateEnded.
2010-03-01 22:25:33 +0100: pppettterrr19565: Error -8 (Did not receive a response from 0x18caf5d0.)
Video Conference Error Report:
Video Conference Support Report:
103.288940 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 1 returns 1
614.119576 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 2 returns 1
614.364100 @Video Conference/VCInitiateConference.m:1599 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
724.498552 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 3 returns 1
724.741406 @Video Conference/VCInitiateConference.m:1599 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
Video Conference User Report:
0.000000 @:0 type=5 (00000000/16402)
[Local SIP port]
0.317676 @Video Conference/VideoConferenceMultiController.m:1474 type=5 (00000000/0)
[IP And Port Data With Caller IP And Port Data: Obtained 120 bytes of local IP and port data (3 entries). Remote data was 0 bytes (0 entries).
Binary Images Description for "iChat":
0x1000 - 0x23cfff com.apple.iChat 4.0.8 (619) /Applications/iChat.app/Contents/MacOS/iChat
0x2b1000 - 0x326fff com.apple.Bluetooth 2.1.9 (2.1.9f10) /System/Library/Frameworks/IOBluetooth.framework/Versions/A/IOBluetooth
0x375000 - 0x4a8fff com.apple.viceroy.framework 363.57 (363.59) /System/Library/PrivateFrameworks/VideoConference.framework/Versions/A/VideoCon ference
0x519000 - 0x558fff com.apple.vmutils 4.1 (104) /System/Library/PrivateFrameworks/vmutils.framework/Versions/A/vmutils
0x57a000 - 0x593fff com.apple.frameworks.preferencepanes 12.2 /System/Library/Frameworks/PreferencePanes.framework/Versions/A/PreferencePanes
0x5ad000 - 0x5dffff com.apple.remotedesktop.screensharing 1.0.3 /System/Library/PrivateFrameworks/ScreenSharing.framework/Versions/A/ScreenShar ing
0x5f2000 - 0x606fff com.apple.ScreenSaver 2.2 /System/Library/Frameworks/ScreenSaver.framework/Versions/A/ScreenSaver
0x617000 - 0x635fff libexpat.1.dylib /usr/lib/libexpat.1.dylib
0x63d000 - 0x6b0fff com.apple.iLifeMediaBrowser 2.1.5 (368) /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser
0x6fe000 - 0x730fff com.apple.iChatCommonGUI 4.0.8 (619) /System/Library/PrivateFrameworks/iChatCommonGUI.framework/iChatCommonGUI
0x75b000 - 0x75dfff com.apple.BezelServicesFW 1.4.9212 /System/Library/PrivateFrameworks/BezelServices.framework/Versions/A/BezelServi ces
0x7d5000 - 0x7dafff com.apple.iChat.Styles.Balloons 4.0.8 (619) /Applications/iChat.app/Contents/PlugIns/Balloons.transcriptstyle/Contents/MacO S/Balloons
0x7e1000 - 0x7e4fff com.apple.iChat.Styles.Boxes 4.0.8 (619) /Applications/iChat.app/Contents/PlugIns/Boxes.transcriptstyle/Contents/MacOS/B oxes
0x7eb000 - 0x7f1fff com.apple.iChat.Styles.Compact 4.0.8 (619) /Applications/iChat.app/Contents/PlugIns/Compact.transcriptstyle/Contents/MacOS /Compact
0x900000 - 0x902fff com.apple.iChat.Styles.Text 4.0.8 (619) /Applications/iChat.app/Contents/PlugIns/Text.transcriptstyle/Contents/MacOS/Te xt
0x145e6000 - 0x145effff com.apple.IOFWDVComponents 1.9.5 /System/Library/Components/IOFWDVComponents.component/Contents/MacOS/IOFWDVComp onents
0x14600000 - 0x14603fff com.apple.audio.AudioIPCPlugIn 1.0.6 /System/Library/Extensions/AudioIPCDriver.kext/Contents/Resources/AudioIPCPlugI n.bundle/Contents/MacOS/AudioIPCPlugIn
0x14674000 - 0x146affff com.apple.QuickTimeFireWireDV.component 7.6.4 (1327.73) /System/Library/QuickTime/QuickTimeFireWireDV.component/Contents/MacOS/QuickTim eFireWireDV
0x146bc000 - 0x146d8fff com.apple.opengl 1.5.10 /System/Library/Frameworks/OpenGL.framework/Versions/A/Resources/GLRendererFloa t.bundle/GLRendererFloat
0x148a1000 - 0x14b9afff com.apple.RawCamera.bundle 2.3.0 (505) /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera
0x14c8f000 - 0x14c95fff com.apple.audio.AppleHDAHALPlugIn 1.7.1 (1.7.1a2) /System/Library/Extensions/AppleHDA.kext/Contents/PlugIns/AppleHDAHALPlugIn.bun dle/Contents/MacOS/AppleHDAHALPlugIn
0x14f3e000 - 0x14f6cfff com.apple.QuickTimeIIDCDigitizer 7.6.4 (1327.73) /System/Library/QuickTime/QuickTimeIIDCDigitizer.component/Contents/MacOS/Quick TimeIIDCDigitizer
0x14f77000 - 0x14fc5fff com.apple.QuickTimeUSBVDCDigitizer 2.3.2 /System/Library/QuickTime/QuickTimeUSBVDCDigitizer.component/Contents/MacOS/Qui ckTimeUSBVDCDigitizer
0x162b8000 - 0x1643dfff com.apple.opengl 1.5.10 /System/Library/Frameworks/OpenGL.framework/Resources/GLEngine.bundle/GLEngine
0x1646b000 - 0x16749fff com.apple.ATIRadeonX2000GLDriver 1.5.48 (5.4.8) /System/Library/Extensions/ATIRadeonX2000GLDriver.bundle/Contents/MacOS/ATIRade onX2000GLDriver
0x17865000 - 0x17a68fff com.apple.audio.codecs.Components 1.9 /System/Library/Components/AudioCodecs.component/Contents/MacOS/AudioCodecs
0x18201000 - 0x18206fff com.apple.CoreGraphics 1.409.5 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGXCoreImage.A.dylib
0x184a1000 - 0x184a1fff com.apple.JavaPluginCocoa 12.5.0 /System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/JavaPluginCoco a.bundle/Contents/MacOS/JavaPluginCocoa
0x184b0000 - 0x184b6fff com.apple.JavaVM 12.5.0 /System/Library/Frameworks/JavaVM.framework/Versions/A/JavaVM
0x184c0000 - 0x184c1fff com.apple.iChat.PersonIconPlugIn 4.0.8 (619) /Applications/iChat.app/Contents/PlugIns/PersonIcon.plugin/Contents/MacOS/Perso nIcon
0x184f4000 - 0x184f6fff com.apple.AutomatorCMM 1.1 (162) /System/Library/Contextual Menu Items/AutomatorCMM.plugin/Contents/MacOS/AutomatorCMM
0x18661000 - 0x18662fff com.apple.BluetoothMenu 2.1.8 (2.1.8f2) /System/Library/Contextual Menu Items/BluetoothContextualMenu.plugin/Contents/MacOS/BluetoothContextualMenu
0x18667000 - 0x1866cfff com.apple.FolderActionsMenu 1.3.2 /System/Library/Contextual Menu Items/FolderActionsMenu.plugin/Contents/MacOS/FolderActionsMenu
0x1957b000 - 0x1957efff com.apple.iokit.IOQTComponents 1.6 /System/Library/Components/IOQTComponents.component/Contents/MacOS/IOQTComponen ts
0x1a10a000 - 0x1a126fff com.apple.QuartzComposer.ExtraPatches 2.1 (106.13) /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzCompose r.framework/Versions/A/Resources/ExtraPatches.plugin/Contents/MacOS/ExtraPatches
0x1a138000 - 0x1a155fff com.apple.audio.midi.CoreMIDI 1.6.1 (42) /System/Library/Frameworks/CoreMIDI.framework/Versions/A/CoreMIDI
0x1a1ed000 - 0x1a1fafff com.apple.QuartzComposer.Backdrops 1.1 /System/Library/Graphics/Quartz Composer Patches/Backdrops.plugin/Contents/MacOS/Backdrops
0x8fe00000 - 0x8fe2dfff dyld /usr/lib/dyld
0x90003000 - 0x90039fff libtidy.A.dylib /usr/lib/libtidy.A.dylib
0x9003a000 - 0x90052fff com.apple.CoreVideo 1.6.0 (20.0) /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
0x90053000 - 0x90058fff com.apple.DisplayServicesFW 2.0.2 /System/Library/PrivateFrameworks/DisplayServices.framework/Versions/A/DisplayS ervices
0x90059000 - 0x906f9fff com.apple.CoreGraphics 1.409.5 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
0x906fa000 - 0x90743fff com.apple.Metadata 10.5.8 (398.26) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
0x90744000 - 0x90a4cfff com.apple.HIToolbox 1.5.6 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
0x90a4d000 - 0x90e0bfff com.apple.Accelerate.vecLib 3.4.2 (vecLib 3.4.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x90e0c000 - 0x90e12fff com.apple.print.framework.Print 218.0.3 (220.2) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
0x90e13000 - 0x90f4bfff com.apple.imageKit 1.0.2 (1.0) /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/ImageKit.fram ework/Versions/A/ImageKit
0x90f4c000 - 0x90fc9fff com.apple.Accelerate.vecLib 3.4.2 (vecLib 3.4.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x90fca000 - 0x90fcdfff com.apple.help 1.1 (36) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
0x90fce000 - 0x90fcffff libffi.dylib /usr/lib/libffi.dylib
0x90fd0000 - 0x90fdcfff com.apple.helpdata 1.0.1 (14.2) /System/Library/PrivateFrameworks/HelpData.framework/Versions/A/HelpData
0x90fdd000 - 0x9108ffff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib
0x912f9000 - 0x912fdfff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
0x912fe000 - 0x9133cfff com.apple.opengl 1.5.10 /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dyl ib
0x9133d000 - 0x914ddfff com.apple.JavaScriptCore 5531.21 (5531.21.9) /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
0x914de000 - 0x914fafff com.apple.ImageIO.framework 2.0.7 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libPng.dylib
0x915f0000 - 0x91ec1fff com.apple.WebCore 5531.21 (5531.21.8) /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
0x91ec2000 - 0x91ed0fff libz.1.dylib /usr/lib/libz.1.dylib
0x91ed1000 - 0x91edbfff com.apple.audio.SoundManager 3.9.2 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.f ramework/Versions/A/CarbonSound
0x91edc000 - 0x91fc4fff com.apple.CoreData 100.2 (186.2) /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
0x91fc5000 - 0x92181fff com.apple.QuartzComposer 2.1 (106.13) /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzCompose r.framework/Versions/A/QuartzComposer
0x92182000 - 0x9220ffff com.apple.framework.IOKit 1.5.2 (???) /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x92210000 - 0x9226cfff com.apple.htmlrendering 68 (1.1.3) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering .framework/Versions/A/HTMLRendering
0x9226d000 - 0x92271fff com.apple.OpenDirectory 10.5 /System/Library/PrivateFrameworks/OpenDirectory.framework/Versions/A/OpenDirect ory
0x92272000 - 0x923a5fff com.apple.CoreFoundation 6.5.7 (476.19) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x923a6000 - 0x923d7fff com.apple.quartzfilters 1.5.0 /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzFilters .framework/Versions/A/QuartzFilters
0x923d8000 - 0x925a9fff com.apple.security 5.0.6 (37592) /System/Library/Frameworks/Security.framework/Versions/A/Security
0x925aa000 - 0x925b5fff com.apple.CoreGraphics 1.409.5 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
0x925b6000 - 0x925b6fff com.apple.Cocoa 6.5 (???) /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x925b7000 - 0x925b7fff com.apple.Accelerate.vecLib 3.4.2 (vecLib 3.4.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
0x925b8000 - 0x925bafff com.apple.CrashReporterSupport 10.5.7 (161) /System/Library/PrivateFrameworks/CrashReporterSupport.framework/Versions/A/Cra shReporterSupport
0x925bb000 - 0x925dffff libxslt.1.dylib /usr/lib/libxslt.1.dylib
0x925ed000 - 0x92754fff libSystem.B.dylib /usr/lib/libSystem.B.dylib
0x92755000 - 0x9275dfff com.apple.DiskArbitration 2.2.1 /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x9275e000 - 0x927dbfff com.apple.audio.CoreAudio 3.1.2 /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x927e1000 - 0x927f0fff com.apple.DSObjCWrappers.Framework 1.3 /System/Library/PrivateFrameworks/DSObjCWrappers.framework/Versions/A/DSObjCWra ppers
0x927f1000 - 0x92cc2fff com.apple.opengl 1.5.10 /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLProgramma bility.dylib
0x92cc3000 - 0x92d04fff com.apple.CoreGraphics 1.409.5 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
0x92d35000 - 0x92d86fff com.apple.HIServices 1.7.1 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
0x92d87000 - 0x92dd5fff com.apple.datadetectorscore 1.0.2 (52.14) /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/DataDe tectorsCore
0x92dd6000 - 0x92e7dfff com.apple.QD 3.11.57 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
0x92e8a000 - 0x92f90fff com.apple.PubSub 1.0.4 (65.11) /System/Library/Frameworks/PubSub.framework/Versions/A/PubSub
0x92f91000 - 0x92fa7fff com.apple.DictionaryServices 1.0.0 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
0x92fa8000 - 0x9301afff com.apple.PDFKit 2.1.2 /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/PDFKit.framew ork/Versions/A/PDFKit
0x9301b000 - 0x930c2fff com.apple.CFNetwork 438.14 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
0x930c3000 - 0x93107fff com.apple.DirectoryService.PasswordServerFramework 3.0.4 /System/Library/PrivateFrameworks/PasswordServer.framework/Versions/A/PasswordS erver
0x93108000 - 0x93147fff com.apple.ImageIO.framework 2.0.7 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libTIFF.dylib
0x93148000 - 0x9316cfff libssl.0.9.7.dylib /usr/lib/libssl.0.9.7.dylib
0x9316d000 - 0x93195fff com.apple.shortcut 1.0.1 (1.0) /System/Library/PrivateFrameworks/Shortcut.framework/Versions/A/Shortcut
0x93196000 - 0x931c1fff libauto.dylib /usr/lib/libauto.dylib
0x931c2000 - 0x931c9fff com.apple.CoreGraphics 1.409.5 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib
0x931ca000 - 0x93227fff libstdc++.6.dylib /usr/lib/libstdc++.6.dylib
0x93228000 - 0x9337afff com.apple.audio.toolbox.AudioToolbox 1.5.3 /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x933ee000 - 0x9340dfff com.apple.ImageIO.framework 2.0.7 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJPEG.dylib
0x9340e000 - 0x934a1fff com.apple.ink.framework 101.3 (86) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
0x934a2000 - 0x934a7fff com.apple.CommonPanels 1.2.4 (85) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
0x934a8000 - 0x934c0fff com.apple.openscripting 1.2.8 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
0x934c1000 - 0x934d1fff com.apple.speech.synthesis.framework 3.7.1 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x93576000 - 0x93705fff com.apple.CoreAUC 3.08.0 /System/Library/PrivateFrameworks/CoreAUC.framework/Versions/A/CoreAUC
0x93706000 - 0x9370ffff com.apple.speech.recognition.framework 3.7.24 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
0x9377e000 - 0x937b0fff com.apple.LDAPFramework 1.4.5 (110) /System/Library/Frameworks/LDAP.framework/Versions/A/LDAP
0x937b1000 - 0x937cefff com.apple.QuickLookFramework 1.3.1 (170.9) /System/Library/Frameworks/QuickLook.framework/Versions/A/QuickLook
0x937d9000 - 0x93860fff libsqlite3.0.dylib /usr/lib/libsqlite3.0.dylib
0x93861000 - 0x9386dfff com.apple.opengl 1.5.10 /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
0x939d2000 - 0x93ab2fff libobjc.A.dylib /usr/lib/libobjc.A.dylib
0x93ab3000 - 0x93ab7fff com.apple.ImageIO.framework 2.0.7 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libGIF.dylib
0x93ab8000 - 0x93d34fff com.apple.Foundation 6.5.9 (677.26) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x93d35000 - 0x94145fff com.apple.Accelerate.vecLib 3.4.2 (vecLib 3.4.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
0x94146000 - 0x9415dfff com.apple.datadetectors 1.0.1 (66.2) /System/Library/PrivateFrameworks/DataDetectors.framework/Versions/A/DataDetect ors
0x9415e000 - 0x94484fff com.apple.QuickTime 7.6.4 (1327.73) /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
0x94485000 - 0x944ebfff com.apple.ISSupport 1.8 (38.3) /System/Library/PrivateFrameworks/ISSupport.framework/Versions/A/ISSupport
0x944ec000 - 0x9456bfff com.apple.SearchKit 1.2.2 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x9456c000 - 0x946a5fff libicucore.A.dylib /usr/lib/libicucore.A.dylib
0x946a6000 - 0x946cffff com.apple.CoreMediaPrivate 15.0 /System/Library/PrivateFrameworks/CoreMediaPrivate.framework/Versions/A/CoreMed iaPrivate
0x946d0000 - 0x946d2fff com.apple.securityhi 3.0 (30817) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
0x946d3000 - 0x946d3fff com.apple.installserver.framework 1.0 (8) /System/Library/PrivateFrameworks/InstallServer.framework/Versions/A/InstallSer ver
0x946d4000 - 0x9470efff com.apple.securityfoundation 3.0.2 (36131) /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
0x9470f000 - 0x9474ffff com.apple.CoreMediaIOServicesPrivate 20.0 /System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/CoreMediaIOServicesPrivate
0x94750000 - 0x94760fff com.apple.LangAnalysis 1.6.5 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
0x94761000 - 0x9477ffff libresolv.9.dylib /usr/lib/libresolv.9.dylib
0x94780000 - 0x947fafff com.apple.print.framework.PrintCore 5.5.4 (245.6) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
0x947fb000 - 0x94802fff com.apple.agl 3.0.9 (AGL-3.0.9) /System/Library/Frameworks/AGL.framework/Versions/A/AGL
0x94803000 - 0x94812fff libsasl2.2.dylib /usr/lib/libsasl2.2.dylib
0x94813000 - 0x9486dfff com.apple.CoreText 2.0.4 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreText.framework/Versions/A/CoreText
0x9486e000 - 0x9486efff com.apple.CoreServices 32 /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x9486f000 - 0x948a6fff com.apple.SystemConfiguration 1.9.2 /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x948a7000 - 0x94957fff edu.mit.Kerberos 6.0.13 /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos
0x94958000 - 0x94985fff com.apple.Accelerate.vecLib 3.4.2 (vecLib 3.4.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
0x94986000 - 0x94986fff com.apple.ApplicationServices 34 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x94987000 - 0x94acffff com.apple.ImageIO.framework 2.0.7 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/ImageIO
0x94ad0000 - 0x94c50fff com.apple.AddressBook.framework 4.1.2 (702) /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook
0x94c51000 - 0x94c7afff libcups.2.dylib /usr/lib/libcups.2.dylib
0x94c7b000 - 0x94c7bfff com.apple.Accelerate 1.4.2 (Accelerate 1.4.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x94c7c000 - 0x94c81fff com.apple.backup.framework 1.0 /System/Library/PrivateFrameworks/Backup.framework/Versions/A/Backup
0x94c82000 - 0x94c89fff libbsm.dylib /usr/lib/libbsm.dylib
0x94cbf000 - 0x94cbffff com.apple.vecLib 3.4.2 (vecLib 3.4.2) /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
0x94cc0000 - 0x94d77fff com.apple.QTKit 7.6.4 (1327.73) /System/Library/Frameworks/QTKit.framework/Versions/A/QTKit
0x94d78000 - 0x94d96fff com.apple.DirectoryService.Framework 3.5.7 /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
0x94d97000 - 0x94dd1fff com.apple.coreui 1.2 (62) /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
0x94dd2000 - 0x94e5cfff com.apple.DesktopServices 1.4.8 /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
0x94f40000 - 0x94f51fff com.apple.CFOpenDirectory 10.5 /System/Library/PrivateFrameworks/OpenDirectory.framework/Versions/A/Frameworks /CFOpenDirectory.framework/Versions/A/CFOpenDirectory
0x94f52000 - 0x94f54fff com.apple.ImageIO.framework 2.0.7 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRadiance.dylib
0x94f55000 - 0x95036fff libxml2.2.dylib /usr/lib/libxml2.2.dylib
0x9503a000 - 0x950cdfff com.apple.ApplicationServices.ATS 3.8 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
0x950ce000 - 0x9511ffff com.apple.framework.familycontrols 1.0.4 /System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/FamilyCon trols
0x95120000 - 0x95120fff com.apple.audio.units.AudioUnit 1.5 /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x95126000 - 0x951e0fff com.apple.CoreServices.OSServices 228 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x951e1000 - 0x954bbfff com.apple.CoreServices.CarbonCore 786.11 (786.14) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x954bc000 - 0x95598fff com.apple.WebKit 5531.21 (5531.21.8) /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
0x95599000 - 0x95664fff com.apple.ColorSync 4.5.3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
0x95665000 - 0x95672fff com.apple.opengl 1.5.10 /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x9573d000 - 0x95f3bfff com.apple.AppKit 6.5.9 (949.54) /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x95f3c000 - 0x95f6bfff com.apple.AE 402.3 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
0x95f6c000 - 0x95f6cfff com.apple.MonitorPanelFramework 1.2.0 /System/Library/PrivateFrameworks/MonitorPanel.framework/Versions/A/MonitorPane l
0x95f6d000 - 0x95f72fff com.apple.KerberosHelper 1.1 (1.0) /System/Library/PrivateFrameworks/KerberosHelper.framework/Versions/A/KerberosH elper
0x95f73000 - 0x95f73fff com.apple.Carbon 136 /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x95f74000 - 0x95fcdfff com.apple.opengl 1.5.10 /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
0x95fce000 - 0x96010fff com.apple.NavigationServices 3.5.2 (163) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationSer vices.framework/Versions/A/NavigationServices
0x96011000 - 0x963aefff com.apple.QuartzCore 1.5.8 /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x963af000 - 0x963affff com.apple.quartzframework 1.5 /System/Library/Frameworks/Quartz.framework/Versions/A/Quartz
0x96420000 - 0x96435fff com.apple.ImageCapture 5.0.2 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
0x96436000 - 0x96481fff com.apple.securityinterface 3.0.4 (37213) /System/Library/Frameworks/SecurityInterface.framework/Versions/A/SecurityInter face
0x96482000 - 0x96489fff libgcc_s.1.dylib /usr/lib/libgcc_s.1.dylib
0x9648a000 - 0x964a6fff com.apple.IMFramework 4.0.8 (584) /System/Library/Frameworks/InstantMessage.framework/Versions/A/InstantMessage
0x964a7000 - 0x96534fff com.apple.LaunchServices 292 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
0x96535000 - 0x96584fff com.apple.QuickLookUIFramework 1.3.1 (170.9) /System/Library/PrivateFrameworks/QuickLookUI.framework/Versions/A/QuickLookUI
0x96585000 - 0x974d5fff com.apple.QuickTimeComponents.component 7.6.4 (1327.73) /System/Library/QuickTime/QuickTimeComponents.component/Contents/MacOS/QuickTim eComponents
0x974d6000 - 0x9759dfff com.apple.vImage 3.0 /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
0x9759e000 - 0x975b1fff com.apple.IMUtils 4.0.8 (584) /System/Library/Frameworks/InstantMessage.framework/Frameworks/IMUtils.framewor k/Versions/A/IMUtils
===
Error -8 --> something with ports i believe ? Local or Remote site ?
How can i check which port or ports cause the problem ?
Thanks for answering, regards,
Peter.

Similar Messages

Applied for finance on Sunday 29th Dec. Still waiting on identity check emails. Anyone else in the same boat?

Hello! I know this isn't strictly the right section but then there wasn't really a place for me to post this (unless i missed it) but to the point, should i have received these emails by now as everything else seemed to go fine. I tried phoning Barclay Partner Finance but couldn't get through. Any help would be great!
Are the finance districts closed with NYE nearly upon us?
Thanks,
Ben

Cookies are stored in a cookie jar and thus are shared among all open tabs and windows.
Only all Private Browsing mode tabs/windows use a separate cookie jar that is used for all PB mode tabs.
Note that session restore stores cookies of open tabs in the sessionstore.js file as part of stored session data.
* http://kb.mozillazine.org/browser.sessionstore.privacy_level

Getting "IPSEC(epa_des_crypt): decrypted packet failed SA identity check" messages on packets from only one of two far-end sources sharing the same tunnel, the other source works fine. What exactly does this error mean?

One computer at COMPANY-A is attempting to communicate with two
computers located at COMPANY-B, via an IPsec tunnel between the
two companies.
All communications are via TCP protocol.
All devices present public IP addresses to one another, although they
may have RFC 1918 addresses on other interfaces, and NAT may be in use
on the COMPANY-B side. (NAT is not being used on the COMPANY-A side.)
The players:(Note: first three octets have been changed for security reasons)
COMPANY-A computer      1.2.3.161
COMPANY-A router        1.2.3.8 (also IPsec peer)
COMPANY-A has 1.2.3.0/24 with no subnetting.
COMPANY-B router        4.5.6.228 (also IPsec peer)
COMPANY-B computer #1   4.5.7.94 (this one has no issues)
COMPANY-B computer #2   4.5.7.29 (this one fails)
COMPANY-B has 4.5.6.0/23 subnetted in various ways.
COMPANY-B also has 9.10.11.0/24, but it is not involved in the issue.
What works:
The COMPANY-A computer 1.2.3.161 can communicate via the single IPsec
tunnel to COMPANY-B computer #1 4.5.7.94 without problems.
The "show crypto session detail" command shows Inbound/Outbound packets
flowing in the dec'ed and enc'ed positions.
What doesn't:
When the COMPANY-A computer 1.2.3.161 attempts to communicate
via the single IPsec tunnel with the COMPANY-B computer #2 4.5.7.29,
the COMPANY-A router eventually reports five of these messages:
Oct 9 15:24:54.327: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
Oct 9 15:24:57.327: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
Oct 9 15:25:03.327: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
Oct 9 15:25:15.328: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
Oct 9 15:25:39.329: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
Oct 9 15:26:27.328: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
and the "show crypto session detail" shows inbound packets being dropped.
The COMPANY-A computer that opens the TCP connection never gets past the
SYN_SENT phase of the TCP connection whan trying to communicate with the
COMPANY-B computer #2, and the repeated error messages are the retries of
the SYN packet.
On the COMPANY-A side, this IPsec configuration has been set up on a 3745,
a 3725, and some 76xx routers were tried, all with similar behavior,
with packets from one far-end computer passing fine, and packets from
another far-end computer in the same netblock passing through the same
IPsec tunnel failing with the "failed SA identity" error.
The COMPANY-A computer directs all packets headed to COMPANY-B via the
COMPANY-A router at 1.2.3.8 with this set of route settings:
netstat -r -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window irtt Iface
4.5.7.0         1.2.3.8         255.255.255.0   UG        0 0          0 eth3
1.2.3.8.0       0.0.0.0         255.255.255.0   U         0 0          0 eth3
10.1.0.0        0.0.0.0         255.255.240.0   U         0 0          0 eth0
169.254.0.0     0.0.0.0         255.255.0.0     U         0 0          0 eth3
10.0.0.0        10.1.1.1        255.0.0.0       UG        0 0          0 eth0
0.0.0.0         1.2.3.1         0.0.0.0         UG        0 0          0 eth3
The first route line shown is selected for access to both COMPANY-B computers.
The COMPANY-A router (IPsec tunnel endpoint, 1.2.3.8) has this
configuration:
crypto isakmp policy 10
encr 3des
authentication pre-share
group 2
lifetime 28800
crypto isakmp key XXXXXXXXXXXXXXXXXXXXXXX address 4.5.6.228
crypto ipsec security-association lifetime seconds 86400
crypto ipsec transform-set COMPANY-B01 esp-3des esp-sha-hmac
crypto map COMPANY-BMAP1 10 ipsec-isakmp
description COMPANY-B VPN
set peer 4.5.6.228
set transform-set COMPANY-B01
set pfs group2
match address 190
interface FastEthernet0/0
ip address 1.2.3.8 255.255.255.0
no ip redirects
ip virtual-reassembly
duplex auto
speed auto
no cdp enable
crypto map COMPANY-BMAP1
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 1.2.3.1
ip route 10.0.0.0 255.0.0.0 10.1.1.1
ip route 1.2.3.8.0 255.255.255.0 FastEthernet0/0
access-list 190 permit ip host 1.2.3.161 4.5.7.0 0.0.0.255
access-list 190 permit ip host 1.2.3.161 9.10.11.0 0.0.0.255
bridge 1 protocol ieee
One of the routers tried had this IOS/hardware configuration:
Cisco IOS Software, 3700 Software (C3725-ADVIPSERVICESK9-M), Version 12.4(25c),
RELEASE SOFTWARE (fc2)
isco 3725 (R7000) processor (revision 0.1) with 115712K/15360K bytes of memory.
Processor board ID XXXXXXXXXXXXXXX
R7000 CPU at 240MHz, Implementation 39, Rev 3.3, 256KB L2 Cache
2 FastEthernet interfaces
4 ATM interfaces
DRAM configuration is 64 bits wide with parity disabled.
55K bytes of NVRAM.
31296K bytes of ATA System CompactFlash (Read/Write)
250368K bytes of ATA Slot0 CompactFlash (Read/Write)
Configuration register is 0x2102
#show crypto sess
Crypto session current status
Interface: FastEthernet0/0
Session status: UP-ACTIVE
Peer: 4.5.6.228 port 500
IKE SA: local 1.2.3.8/500 remote 4.5.6.228/500 Active
IPSEC FLOW: permit ip host 1.2.3.161 4.5.7.0/255.255.255.0
        Active SAs: 2, origin: crypto map
IPSEC FLOW: permit ip host 1.2.3.161 9.10.11.0/255.255.255.0
        Active SAs: 0, origin: crypto map
#show crypto sess det
Crypto session current status
Code: C - IKE Configuration mode, D - Dead Peer Detection
K - Keepalives, N - NAT-traversal, X - IKE Extended Authentication
Interface: FastEthernet0/0
Session status: UP-ACTIVE
Peer: 4.5.6.228 port 500 fvrf: (none) ivrf: (none)
      Phase1_id: 4.5.6.228
      Desc: (none)
IKE SA: local 1.2.3.8/500 remote 4.5.6.228/500 Active
          Capabilities:(none) connid:1 lifetime:06:26:27
IPSEC FLOW: permit ip host 1.2.3.161 4.5.7.0/255.255.255.0
        Active SAs: 2, origin: crypto map
        Inbound: #pkts dec'ed 651 drop 16 life (KB/Sec) 4496182/23178
        Outbound: #pkts enc'ed 574 drop 2 life (KB/Sec) 4496279/23178
IPSEC FLOW: permit ip host 1.2.3.161 9.10.11.0/255.255.255.0
        Active SAs: 0, origin: crypto map
        Inbound: #pkts dec'ed 0 drop 0 life (KB/Sec) 0/0
        Outbound: #pkts enc'ed 0 drop 0 life (KB/Sec) 0/0
The COMPANY-B device on their end of the IPsec VPN is a Juniper SSG1000
Version 6.1 (ScreenOS)
We only have a limited view into the Juniper device configuration.
What we were allowed to see was:
COMPANY-B-ROUTER(M)-> sh config | incl COMPANY-A
set address "Untrust" "oss-COMPANY-A-1.2.3.161" 1.2.3.161 255.255.255.255
set ike gateway "COMPANY-A-1-GW" address 1.2.3.8 Main outgoing-interface "ethernet2/1" preshare xxxxxxxxxxxxxxxxxxxxxx proposal "pre-g2-3des-sha"
set vpn "COMPANY-A-1-IKE" gateway "COMPANY-A-1-GW" no-replay tunnel idletime 0 proposal "g2-esp-3des-sha-28800"
set policy id 2539 from "Untrust" to "Trust" "oss-COMPANY-A-1.2.3.161" "9.10.11.0-24" "ANY" tunnel vpn "COMPANY-A-1-IKE" id 0x309a pair-policy 2500
set policy id 2500 from "Trust" to "Untrust" "9.10.11.0-24" "oss-COMPANY-A-1.2.3.161" "ANY" tunnel vpn "COMPANY-A-1-IKE" id 0x309a pair-policy 2539
set policy id 2541 from "Trust" to "Untrust" "4.5.7.0-24" "oss-COMPANY-A-1.2.3.161" "ANY" tunnel vpn "COMPANY-A-1-IKE" id 0x309b pair-policy 2540
set policy id 2540 from "Untrust" to "Trust" "oss-COMPANY-A-1.2.3.161" "4.5.7.0-24" "ANY" tunnel vpn "COMPANY-A-1-IKE" id 0x309b pair-policy 2541
COMPANY-B-ROUTER(M)->
I suspect that this curious issue is due to a configuration setting on the
Juniper device, but neither party has seen this error before. COMPANY-B
operates thousands of IPsec VPNs and they report that this is a new error
for them too. The behavior that allows traffic from one IP address to
work and traffic from another to end up getting this error is also unique.
As only the Cisco side emits any error message at all, this is the only
clue we have as to what is going on, even if this isn't actually an IOS
problem.
What we are looking for is a description of exactly what the Cisco
IOS error message:
IPSEC(epa_des_crypt): decrypted packet failed SA identity check
is complaining about, and if there are any known causes of the behavior
described that occur when running IPsec between Cisco IOS and a Juniper
SSG device. Google reports many other incidents of the same error
message (but not the "I like that IP address but hate this one" behavior),
and not just with a Juniper device on the COMPANY-B end, but for those cases,
not one was found where the solution was described.
It is hoped that with a better explanation of the error message
and any known issues with Juniper configuration settings causing
this error, we can have COMPANY-B make adjustments to their device.
Or, if there is a setting change needed on the COMPANY-A router,
that can also be implemented.
Thanks in advance for your time in reading this, and any ideas.

Hello Harish,
It is believed that:
COMPANY-B computer #1   4.5.7.94 (this one has no issues)
COMPANY-B computer #2   4.5.7.29 (this one fails)
both have at least two network interfaces, one with a public IP address
(which we are supposedly conversing with) and one with a RFC 1918 type
address.   COMPANY-B is reluctant to disclose details of their network or
servers setup, so this is not 100% certain.
Because of that uncertainty, it occurred to me that perhaps COMPANY-B
computer #2 might be incorrectly routing via the RFC 1918 interface.
In theory, such packets should have been blocked by the access-list on both
COMPANY-A router, and should not have even made it into the IPsec VPN
if the Juniper access settings work as it appears they should. So I turned up
debugging on COMPANY-A router so that I could see the encrypted and
decrypted packet hex dumps.
I then hand-disassembled the decoded ACK packet IP header received just
prior to the "decrypted packet failed SA check" error being emitted and
found the expected source and destination IP addresses (4.5.7.29 and 1.2.3.161),
in the unecapsulated packet. I also found the expected port numbers of the TCP
conversation that was trying to be established in the TCP header. So, it
looks like COMPANY-B computer #2 is emitting the packets out the right
interface.
The IP packet header of the encrypted packet showed the IP addresses of the
two routers at each terminus of the IPsec VPN, but since I don't know what triggers
the "SA check" error message or what it is complaining about, I don't know what
other clues to look for in the packet dumps.
As to your second question, "can you check whether both encapsulation and
decapsulation happening in 'show crypto ipsec sa'",   the enc'ed/dec'ed
counters were both going up by the correct quantities. When communicating
with the uncooperative COMPANY-B computer #2, you would also see the
received Drop increment for each packet decrypted. When communicating
with the working COMPANY-B computer #1, the Drop counters would not
increment, and the enc'ed/dec'ed would both increment.
#show crypto sess det
Crypto session current status
Code: C - IKE Configuration mode, D - Dead Peer Detection
K - Keepalives, N - NAT-traversal, X - IKE Extended Authentication
Interface: FastEthernet0/0
Session status: UP-ACTIVE
Peer: 4.5.6.228 port 500 fvrf: (none) ivrf: (none)
      Phase1_id: 4.5.6.228
      Desc: (none)
IKE SA: local 1.2.3.8/500 remote 4.5.6.228/500 Active
          Capabilities:(none) connid:1 lifetime:07:59:54
IPSEC FLOW: permit ip host 1.2.3.161 4.5.7.0/255.255.255.0
        Active SAs: 2, origin: crypto map
        Inbound: #pkts dec'ed 376 drop 5 life (KB/Sec) 4458308/28784
        Outbound: #pkts enc'ed 401 drop 3 life (KB/Sec) 4458308/28784
Attempt a TCP communication to COMPANY-B computer #2...
show crypto sess det
Crypto session current status
Code: C - IKE Configuration mode, D - Dead Peer Detection
K - Keepalives, N - NAT-traversal, X - IKE Extended Authentication
Interface: FastEthernet0/0
Session status: UP-ACTIVE
Peer: 4.5.6.228 port 500 fvrf: (none) ivrf: (none)
      Phase1_id: 4.5.6.228
      Desc: (none)
IKE SA: local 1.2.3.8/500 remote 4.5.6.228/500 Active
          Capabilities:(none) connid:1 lifetime:07:59:23
IPSEC FLOW: permit ip host 1.2.3.161 4.5.7.0/255.255.255.0
        Active SAs: 2, origin: crypto map
        Inbound: #pkts dec'ed 376 drop 6 life (KB/Sec) 4458307/28753
        Outbound: #pkts enc'ed 402 drop 3 life (KB/Sec) 4458307/28753
Note Inbound "drop" changed from 5 to 6. (I didn't let it sit for all
the retries.)
#show crypto ipsec sa
interface: FastEthernet0/0
    Crypto map tag: COMPANY-BMAP1, local addr 1.2.3.8
   protected vrf: (none)
   local ident (addr/mask/prot/port): (1.2.3.161/255.255.255.255/0/0)
   remote ident (addr/mask/prot/port): (4.5.7.0/255.255.255.0/0/0)
   current_peer 4.5.6.228 port 500
     PERMIT, flags={origin_is_acl,}
    #pkts encaps: 402, #pkts encrypt: 402, #pkts digest: 402
    #pkts decaps: 376, #pkts decrypt: 376, #pkts verify: 376
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0
    #pkts not decompressed: 0, #pkts decompress failed: 0
    #send errors 3, #recv errors 6
     local crypto endpt.: 1.2.3.8, remote crypto endpt.: 4.5.6.228
     path mtu 1500, ip mtu 1500, ip mtu idb FastEthernet0/0
     current outbound spi: 0xDF2CC59C(3744253340)
inbound esp sas:
      spi: 0xD9D2EBBB(3654478779)
        transform: esp-3des esp-sha-hmac ,
        in use settings ={Tunnel, }
        conn id: 2004, flow_id: SW:4, crypto map: COMPANY-BMAP1
        sa timing: remaining key lifetime (k/sec): (4458307/28600)
        IV size: 8 bytes
        replay detection support: Y
        Status: ACTIVE
     inbound ah sas:
     inbound pcp sas:
     outbound esp sas:
      spi: 0xDF2CC59C(3744253340)
        transform: esp-3des esp-sha-hmac ,
        in use settings ={Tunnel, }
        conn id: 2003, flow_id: SW:3, crypto map: COMPANY-BMAP1
        sa timing: remaining key lifetime (k/sec): (4458307/28600)
        IV size: 8 bytes
        replay detection support: Y
        Status: ACTIVE
     outbound ah sas:
     outbound pcp sas:
The "send" errors appear to be related to the tunnel reverting to a
DOWN state after periods of inactivity, and you appear to get one
each time the tunnel has to be re-negotiated and returned to
an ACTIVE state. There is no relationship between Send errors
incrementing and working/non-working TCP conversations to the
two COMPANY-B servers.
Thanks for pondering this very odd behavior.

File Adapter Advanced Mode - Msecs to Wait Before Modifications Check

Hi, Can anybody tell me how to set this parameter "Msecs to Wait Before Modifications Check" in PI 7.1? I don't see this parameter at all. In advance mode of PI 7.1, we just have Maximum File Size(bytes). Also when I checked the SAP note 801926 for Advanced Mode we can just set only
1. Parameter name: "clusterSyncMode"
2. Parameter name: "ftp.timeout"
Please let me know if anybody has configured this already in PI 7.1.

Hi Ravi
I think this feature is no longer supported in PI 7.1. Although it work with PI 7.0 for NFS and non FCC only.
Thanks
Gaurav

Poll Interval, Msecs To wait before modification checks & Queue Name in CC

Hi All,
I have 3 inter-related interfaces which is having 3 File Sender Communication channels as below charasteristics;
All 3 ccs are running on a common Queue Name inorder to cater the business scenario;
so PI should consume the files in the same sequance of files are copping into the locations;
(time gap between incoming files is around 1-3 secs)
Existing Values in Production system
IF086
Poll Interval                                                                        1 secs
Msecs To wait before modification checks                      10000
Queue Name                                                                     XI_QUE1
run sequance must be 1
IF913
Poll Interval                                                                        1 secs
Msecs To wait before modification checks                      10000
Queue Name                                                                     XI_QUE1
run sequance must be 2
IF084
Poll Interval                                                                        1 secs
Msecs To wait before modification checks                      10000
Queue Name                                                                     XI_QUE1
run sequance must be 3
we are having PI Alert email configured in the system;
when we get a big files into the locations, we get an unwanted Alert emails saying Error;
when I check PI, Overall file transfer is successful,
but we have the below error in the Message Display Audit log as
"Channel CC_Cxxx: Attempt to send file 'T201_200909141702' failed because file was modified during processing. 0 bytes expected, 1202248 bytes found. Trying to resend file"
but Overall file transfer is successful;
Does anyone can explain the reason for this error; ?
Also to remove this error & unwanted Alert email (since final status is successfull), I changed the Poll Interval to 3 for all 3 above CCs; Now I dont get the above error;
Do you think there might be a sequance issue due to this change;?
(time gap between incoming files is around 1-3 secs)
quite lengthy to explain sorry;
Appreciate your help please
thanks
Iver

Hello Iver
Question 3 in the note #821267 FAQ: XI 3.0 / PI 7.0/ PI 7.1 File Adapter, explains what is happening here. This answers your first question.
The file in question was being written to by another process when the file adapter attempted to send it. Depending on the length of time/amount of data that is being written to these files, increasing the polling interval to 3 seconds will help.
Regards
Mark

Site2Site Tunnel issue PSEC(epa_des_crypt): decrypted packet failed SA identity check

Hi,
I have a slight issue I'm having some problems resolving..
The scenario is as follows;
I have an external provider which connects to me via VPN to a Juniper SSG firewall, that works fine.
I then have an external site, which does NOT reside in my MPLS cloud, so I have to deploy IPSec via Internet to reach it.
That also works fine and I have multiple SA's running on that site with no issues or problems.
The external provider has a small network device deployed on the external site which monitor cooling values in one of our warehouses.
The external site which is connect via IPSEC has a Cisco 1921 and a numerous Cisco 3550 deployed.
The VLAN for the cooling provider is vlan 150 and is setup with 10.150.4.0/24 where .1 is the def gw and .10 is the cooling monitor device.
The external provider's servers are located within 192.168.220.0/24 subnet.
As of right now, we can reach the Cisco 1921 through the whole IPsec tunnel from 192.168.220.182 with all services, ping, telnet whatnot, but we are unable to ping the cooling device from 192.168.220.0/24.
However from the Cisco 1921, we can ping both 192.168.220.0/24 and the locally connected 10.150.4.10
So basicly it seems to be the last bit when the traffic goes through the 1921 and to the switch where it fails and I can't for the life of me figure out why.
Network diagram attached.. any ideas?
This is the 1921 config:
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
service password-encryption
hostname bergen-vpn-gw
boot-start-marker
boot system flash flash:c1841-adventerprisek9-mz.124-25d.bin
boot-end-marker
logging buffered 50000
aaa new-model
aaa authentication login default local
aaa authentication enable default enable
aaa session-id common
clock timezone CET 1
clock summer-time CET recurring last Sun Mar 2:00 last Sun Oct 3:00
no ipv6 cef
no ip source-route
ip cef
no ip bootp server
no ip domain lookup
ip domain name xxxxx
multilink bundle-name authenticated
license udi pid CISCO1921/K9 sn FCZ1508C1P4
license boot module c1900 technology-package securityk9
license boot module c1900 technology-package datak9
vtp mode client
redundancy
crypto isakmp policy 10
encr 3des
authentication pre-share
group 2
crypto isakmp key harakiri address 1.2.3.4
crypto ipsec transform-set 3DES-SHA esp-3des esp-sha-hmac
crypto map VPN 10 ipsec-isakmp
set peer 1.2.3.4
set transform-set 3DES-SHA
match address VPN
interface GigabitEthernet0/0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no ip route-cache cef
no ip route-cache
duplex auto
speed auto
interface GigabitEthernet0/0.99
description *** Test VLAN To be removed ***
encapsulation dot1Q 99
ip address 10.90.90.1 255.255.255.0
no ip route-cache
interface GigabitEthernet0/0.112
encapsulation dot1Q 112
ip address 192.168.112.1 255.255.255.0
ip helper-address 172.30.1.223
no ip route-cache
interface GigabitEthernet0/0.150
encapsulation dot1Q 150
ip address 10.150.4.1 255.255.255.0
no ip redirects
no ip proxy-arp
no ip route-cache
interface GigabitEthernet0/0.178
encapsulation dot1Q 178
ip address 192.168.178.1 255.255.255.0
ip helper-address 172.30.1.223
no ip redirects
no ip proxy-arp
no ip route-cache
interface GigabitEthernet0/0.999
encapsulation dot1Q 999
no ip route-cache
interface GigabitEthernet0/1
ip address 1.2.3.4 255.255.255.252
no ip redirects
no ip proxy-arp
no ip route-cache cef
no ip route-cache
duplex auto
speed auto
crypto map VPN
interface FastEthernet0/0/0
switchport access vlan 99
interface FastEthernet0/0/1
interface FastEthernet0/0/2
interface FastEthernet0/0/3
interface Vlan1
no ip address
ip forward-protocol nd
no ip http server
no ip http secure-server
ip route 0.0.0.0 0.0.0.0 85.200.203.29
ip access-list extended VPN
permit ip 10.90.90.0 0.0.0.255 172.30.1.0 0.0.0.255
permit ip 10.90.90.0 0.0.0.255 172.22.0.0 0.0.255.255
permit ip 10.90.90.0 0.0.0.255 172.18.5.0 0.0.0.255
permit ip 10.90.90.0 0.0.0.255 10.50.0.0 0.0.255.255
permit ip 192.168.112.0 0.0.0.255 172.30.1.0 0.0.0.255
permit ip 192.168.112.0 0.0.0.255 172.22.0.0 0.0.255.255
permit ip 192.168.112.0 0.0.0.255 172.18.5.0 0.0.0.255
permit ip 192.168.112.0 0.0.0.255 10.50.0.0 0.0.255.255
permit ip 192.168.178.0 0.0.0.255 172.30.1.0 0.0.0.255
permit ip 192.168.178.0 0.0.0.255 172.22.0.0 0.0.255.255
permit ip 192.168.178.0 0.0.0.255 172.18.5.0 0.0.0.255
permit ip 192.168.178.0 0.0.0.255 10.50.0.0 0.0.255.255
permit ip 192.168.112.0 0.0.0.255 172.30.240.0 0.0.0.255
permit ip 192.168.178.0 0.0.0.255 172.30.240.0 0.0.0.255
permit ip 192.168.112.0 0.0.0.255 10.70.0.0 0.0.0.255
permit ip 192.168.178.0 0.0.0.255 10.70.0.0 0.0.0.255
permit ip 10.150.4.0 0.0.0.255 192.168.220.0 0.0.0.255 log
ip sla 1
icmp-echo 172.30.1.223 source-interface GigabitEthernet0/0.178
threshold 20
frequency 120
ip sla schedule 1 start-time now
ip sla 2
icmp-echo 10.50.1.200 source-interface GigabitEthernet0/0.178
threshold 20
frequency 120
ip sla schedule 2 start-time now
ip sla 3
icmp-echo 172.18.5.121 source-interface GigabitEthernet0/0.178
threshold 20
frequency 120
ip sla schedule 3 start-time now
ip sla 4
icmp-echo 172.22.0.140 source-interface GigabitEthernet0/0.178
threshold 20
frequency 120
ip sla schedule 4 start-time now
ip sla 5
icmp-echo 172.30.240.40 source-interface GigabitEthernet0/0.178
threshold 20
frequency 120
ip sla schedule 5 start-time now
ip sla 6
icmp-echo 10.70.0.200 source-interface GigabitEthernet0/0.178
threshold 20
frequency 120
ip sla schedule 6 start-time now
cdp source-interface GigabitEthernet0/0.112
snmp-server community bamacomro RO
cdp source-interface GigabitEthernet0/0.112
snmp-server community bamacomro RO
snmp-server community bamacomrw RW
control-plane
banner motd ^CCC-----------------------------------------------------------------------------
This system is solely for the use of authorised users for official purposes.
You have no expectation of privacy in its use and to ensure that the system
is functioning properly, individuals using this computer system are subject
to having all their activities monitored and recorded by system personell.
Use of this system evidence an express consent to such monitoring and
agreement that if such monitoring reveals evidence of possible abuse or
criminal activity, system personell may provide the result of such
monitoring to appropiate officials.
-----------------------------------------------------------------------------^C
line con 0
exec-timeout 5 0
logging synchronous
line aux 0
line vty 0 4
access-class telnet in
exec-timeout 180 0
logging synchronous
transport input telnet ssh
line vty 5 15
access-class telnet in
exec-timeout 180 0
password 7 094F471A1A0A
logging synchronous
transport input telnet ssh
scheduler allocate 20000 1000
end

I had that issue 1 year go
"decrypted packet failed SA identity check" means that we have decrypted a traffic that does not match the proxy ID negotiated
Juniper is violating RFC4301. there is nothing we can do against RFC violation
As mentioned in Section 4.4.1, "The Security Policy Database (SPD)",
the SPD (or associated caches) MUST be consulted during the
processing of all traffic that crosses the IPsec protection boundary,
including IPsec management traffic. If no policy is found in the SPD
that matches a packet (for either inbound or outbound traffic), the
packet MUST be discarded.
I know JNPR can do 2 vpn modes. There is one where we could use a VTI instead of a crypto map on the Cisco side. That was the solution to the problem we had.
Cheers,

Sendmail auth/ident checking issue

Hi All,
I have a problem sending mail to a host which seems to have sendmail configured to use Ident port (113) to check back on the mail sender. The host is Sol 9 and sendmail version is 8.13.8+Sun/8.12.9.
My problem is that this port is not enabled on the firewalls between sender and receiver so the ident checking and hence the mail is failing and I need to turn this checking off.
I modified sendmail.cf to include an ident timeout "O Timeout.ident=0s" which I believe is supposed to eliminate this checking yet firewall logs indicate it is still happening.
I can telnet the server on port 25 and have dialogue with the mail server and even supposedly leave a mail though when I try to check it on the host it says there is none.
Any advice on how to get the mail through - particularly any more sendmail.cf settings - would be greatly appreciated.
cheers,

Well, um, no.
tcp_auth is never the first channel a message hits. It's only switched there after authentication happens.
It sould like you're more interested in what the "from" is than if the user authenticates, right?
Your messages will be hitting tcp_local first, then possibly switching to tcp_intranet, or tcp_auth
Likely, the easiest way to do what you want is through somthing in mappings, or through a sieve filter.

What can I do against the Identity Check from Entourage

What can I do against the Identity Check from Entourage???

Looks like you may have stumped the members. Can you explain in more detail? I've used Entourage for as long as it's been out and don't remember encountering an "Identity check" issue.
What version of Entourage? X, 2004, 2008, 2011?
Also --please modify your equipment line to correct your OS version. "iOS" is not a Mac computer operating system. It only runs of iPods, iPads and iPhones, not real computers. Do About this Mac from your Apple menu; that will show your OS version.

File adapter parameter "Msecs to Wait Before Modification Check" is gone

We are using PI 7.1 and we have the problem that the file adapter (ftp) picks up incomplete files from time to time. That causes a mapping error.
Have a look at sap note 821267 question 3.
https://websmp230.sap-ag.de/sap(bD1kZSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=821267
Here you can find a solution. But in reality this parameter isn't there. And if you check the current documentation
http://help.sap.com/saphelp_nwpi71/helpdata/en/44/655453b48a4ddfe10000000a1553f7/content.htm
you can't find this parameter too.
Has anybody of you the same effect? Does anybody of you know the reason? And the most important question is: What is the solution for this problem. The suggested work around in this note isn't possible for us.

Hi,
May be this thread can give you some idea to deal with your problem.. see my reply there
Re: Use temporary file in FTP receiver adapter
Sorry this will not help you here..
One solution which I think is.....
Put file in your source directory with diff name, and write an script which will rename it to its original name.
The logic for scrip should be something like this.
First of all when reading the file for the very first time then check the size and wait for 10 sec and then again check the size. If both size are same then scrip should rename the file to its original name.
Regards,
Sarvesh
Edited by: Sarvesh Singh on Mar 26, 2009 4:35 PM

Using WAIT to repeatedly check a file !!Duke dollars!!

I have created this method, it is supposed to read a text file when a button is pressed after i have allocated an amount of time to check the text file. the text file must be checked every 2mins or so to see if there have been any changes!
i have some code here but 'wait(10000)' doesnt seem to have any effect!
can anybody help
theres 15 duke dollars in it for the best solution
cheers everyone
private void polling()
try {
wait(10000);
} catch (Exception e){
try {
Stack male = new Stack();
          Stack female = new Stack();
          File esbian = new File("02May2002_Test_Facts.txt");
          FileReader ond = new FileReader(esbian);
          BufferedReader hecker = new BufferedReader(ond);
int ef;
String incident = "INCIDENT" ;
          while (true)
               String lum = new String();
               String umber = "";
               String olyfeck = hecker.readLine();
               if (olyfeck == null)
                    break;
               StringTokenizer tarman = new StringTokenizer(olyfeck);
               while (tarman.hasMoreTokens())
umber = tarman.nextToken();
                    for( ef=0; ef < 1; ef++)
umber = umber.replace('\u0028' , '\u0020');
umber = umber.replace('\u0029' , '\u0020');
                    umber = umber.trim().toUpperCase();
if (umber.equals("INCIDENT" ) || umber.equals("EVENT") ||umber.equals("ALARM") || umber.equals("FAULTRECORD") || umber.equals("INTERPRETEDFAULTRECORD"))
lum = umber;
                         agentout.append("subscription succeeded: " + umber + "\r\n");
          hecker.close();
catch(IOException efe)
     System.err.println("ERROR: " + efe) ;
} // end of method polling

I have created this method, it is supposed to read a text file when a button is pressed after i have allocated an amount of time to check the text file. the text file must be checked every 2mins or so to see if there have been any changes!
i have some code here but 'wait(10000)' doesnt seem to have any effect!
can anybody help
theres 15 duke dollars in it for the best solution
cheers everyone
private void polling()
try {
wait(10000);
} catch (Exception e){
try {
Stack male = new Stack();
          Stack female = new Stack();
          File esbian = new File("02May2002_Test_Facts.txt");
          FileReader ond = new FileReader(esbian);
          BufferedReader hecker = new BufferedReader(ond);
int ef;
String incident = "INCIDENT" ;
          while (true)
               String lum = new String();
               String umber = "";
               String olyfeck = hecker.readLine();
               if (olyfeck == null)
                    break;
               StringTokenizer tarman = new StringTokenizer(olyfeck);
               while (tarman.hasMoreTokens())
umber = tarman.nextToken();
                    for( ef=0; ef < 1; ef++)
umber = umber.replace('\u0028' , '\u0020');
umber = umber.replace('\u0029' , '\u0020');
                    umber = umber.trim().toUpperCase();
if (umber.equals("INCIDENT" ) || umber.equals("EVENT") ||umber.equals("ALARM") || umber.equals("FAULTRECORD") || umber.equals("INTERPRETEDFAULTRECORD"))
lum = umber;
                         agentout.append("subscription succeeded: " + umber + "\r\n");
          hecker.close();
catch(IOException efe)
     System.err.println("ERROR: " + efe) ;
} // end of method polling

Ichat video - waiting for response

Everytime I try to start a video chat on iChat, the partner I am trying to chat with will recieve my request, accept it, but iChat continues to say "waiting for a response". We can wait for 10 minutes and it still never connects. I don't have any firewalls running so I'm not sure what it could be, but it's very frustrating. Any ideas?
I also am running on iOS 5.0.1

Hi,
As you are using many apps and many of those will use port above the 1024 threshold I would suggest again strongly that you use UPnP rather than Port Forwarding.
However the IP you need to "point" the ports to is the IP your computer has.
Linksys devices don't have a way you making you keep the same IP without setting up Static routing.
If you leave the Linksys doing DHCP then the computer may not keep the same IP (Particularly if it is shut down for longer then the lease time (normally 24 hours) )
Port Forwarding will limit access via the ports set to the one IP that gets listed.
UPnP will work for any IP (Computer) so it does not matter if the computer's IP changes if DHCP is left On.
Static Routing.
You need to turn Off DHCP here. (no 2)
Then in System Preferences > Network > Advanced Button > TCP tab you need to select Manually in the IPV4 drop down.
Then you need to fill in the other boxes.
The IP can be any IP from 192.168.1.2 - 192.168.1.255
Then the Subnet Mask
Any DNS servers listed in the top part of the same page
And the Router IP (192.168.1.1)
Example of my current set up (Different IPs and also some device are using DHCP)
(Using Manual with DHCP allows some devices to use some DHCP reserved IP addresses)
NOTES
Skype does have a port (listed in it's Preferences) that can be different on each download you make.
If this is not open then Skype will circumvent any firewall (Normally why they are not open) and use either Mail or Web Browsing ports as a "Fall back" position.
Google tend to use a Web Browser anyway to do the Chatting.
ooVoo says this:-
    For a P2P video conversation, one of the clients should have port 443/TCP or 37674/TCP and UDP 10000-65000, UDP 5222 opened for incoming connections in the firewall (port 37674 can be changed from the ‘Connection’ tab of the ooVoo ‘Settings’ window).
    In case the above ports are not opened or the video conversation includes more than 2 participants, the video conversation will be delivered via our video servers. In this case, no special incoming ports need to be opened.
    To decrease delays and load on the network, we also recommend opening the ports detailed above for UDP connections (for incoming and outgoing connections).
Using ports below the 1024 threshold and admitting that if will manage if not opened.
8:18 PM      Thursday; December 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Visa card canceled after using Apple pay. Tried using at Mapco and denied the transaction twice. Then I find out my check card has been canceled. Waiting on new check card from fraud department.

I think Apple pie confused the banks fraudulent alert system and my card was canceled now I have to wait for a new card. Has this happened to anyone else?

Hi ..
Make sure the bank that issued your card is listed here > Apple Pay participating issuers

Lost answer to questions asked for identity check

Hi,
A friend credited a code card amount on her newly created Appstore account opened on the basis of her Apple ID. But at check out, she was asked two questions, and at least one answer she thought was right is not accepted… what should she do in order to save her account (and credit) ?

seventy one wrote:
Yes. call Apple support in your country. Contacting Apple for support and service
Thanks for the star, alpshiker.
Thanks again, seventy one.

IChat waiting "OK" click for ever, never connecting

Hello,
Since my upgrade to Tiger (10.4), iChat changed behaviour when my powerbook awakes. Previously, it would connect by itself, and I would be always on line for my buddies to reach me. Now, for some reason, it seems impatient, and only after a couple seconds, it will go for the alert window "Unable to connect to AOL" (or similar), and wait my clicking OK forever.
Obviously, in the meantime, the network had been put available, but as iChat's waiting for an answer, it never connects.
This is VERY annoying, as my buddies tell me I'm never online now (except if I think to go to iChat and click OK, and then connect by hand myself, selecting "available" in the buddy list window local menu, which I usually don't).
Anyone has a trick to make iChat a little more patient when attempting a connection?
Thanks,

HI Sylvain,
iChat will start up when you restart the computer if the item in the Video section of the Preferences is set to "Automatically start iChat if Camera is ON"
It wll also start up if it an item in your System Preferences > Accounts > Your Accounts > Login items tab
There is a setting in the General section of the iChat Preferences to:
1) Set your Status as Off line when Quitting"
2) What to do for Fast User Switching
3) What to do when returning from Away.
Have you changed the Ports in the Mac firewall if you set them up under Panther and updated rather than installed ?
You now have to set the protocols for the ports. Settings brought forward from PAnther opens up the ports in the TCP Protocol and iChat need most of them in UDP.
http://www.ralphjohnsuk.dsl.pipex.com/page4.html This page starts with the Mac firewall settings before oc=ving on to Router(modem) settings.
Ralph

Having trouble connecting to iChat

I have been trying for a long time now and whenever I open iChat I wait for a long time and then get this message: Could not connect to AIM. Try again. The server message was Auth:BadDbStatus
what does this mean?
and what is "BadDbStatus"
thanks!

Hi Iain,
Welcome To The Apple Discussion Pages.
This message comes up when the AIM servers go out of synch.
This can mean that they have lost coneact with the .mac servers if that is your type of screen name.
It also happens when AIM check their database for unused screen names and release them back to being available. This can also make the AIM servers go out os synch.
There is no cure. You just have to wait for it to be fixed.
If it is to do with .mac, Apple normally gets it sorted in a few hours. Currently this appears to have been going on for about 48 hours so the problem is wider than the AIM/Apple link.
Bad DB is a bad database.
AIM has a Login server this holds the info for who is on line. This info gets paased to a server called Big Blue which holds your Buddy list. There is a check about who is on line and this is what gets displayed in your Buddy List.
It is when these things don't match that it fails to log you on.
10:49 AM Tuesday; May 23, 2006

IChat is waiting on identity check

Similar Messages

Maybe you are looking for