IChat issue - no Audio

Hi,
Is there anyone here that had an issue with their new Intel-based iMacs wherein the video is fine but there's no audio being heard by the other end? - I can hear the other person but he can't hear me.
We both have an AIM account and the only application I have opened was iChat. Speakers and mic levels during Video Preview were fine on both sides. Thanks.
Ronnie
iMac Dual Core Processor   Mac OS X (10.4.4)  

Have you installed any third-party plugins for use with iChat? The below might be worth a shot!
from KB doc 300832
Some audio applications may change your computer's audio settings to a sample rate that is too high for other applications to use. In this situation, system alert sounds still work, and does iTunes, but other applications may have no sound (audio output). This document applies to Mac OS X 10.3 or later and applications that use QuickTime 6 or later for audio, such as Safari and Quicktime Player.
Solution
1. Open Audio MIDI Setup (/Applications/Utilities/), then check the Audio Output setting.
2. Change the Audio Output setting to 44100.0 Hz.
3. Quit Audio MIDI Setup.

Similar Messages

  • Experiencing issues with audio scrubbing in Premiere cc 2014

    Since upgrading I've been having issues with audio scrubbing in Premiere CC 2014.
    Some of the time it won't scrub at all (silence) when I know that scrubbing option is turned on. Other times it will scrub the wrong section of the timeline, I'll hear dialogue from a different point in a clip.
    Much of the time I experience this I'm working with multicam clips in sequences.
    Working on iMac 2013, 32GB RAM, NVIDIA 780
    thank you.

    Hi IP,
    Intensity pro wrote:
    ...Adobe are you listening?
    Yes, but it's Saturday. And I'm on vacation. You know??
    Sorry that we do not have 24-7 support. The best time to catch us is 7AM-7PM PST, Monday to Friday.
    Intensity pro wrote:
    Currently using / testing a 30 day trial of CC 2014 (CS5 user for years with no issues) and all was fine yesterday when editing. Turned on today and had no way to scrub audio. Also had no Intensity Pro external monitor which worked fine the day before. Restarted PC and still nothing so starting poking around with the playback settings in preferences by choosing Adobe Desktop audio in the audio device section choosing OK then selecting back to Blackmagic audio then hit Ok. All of a sudden there was my external monitor and was able to scrub audio again. It's like it's sleeping knowing it should work until you poke it a few times to wake it up. How my Intensity Pro external monitor and scrubbing audio being related in any way is perplexing. Or am I being obtuse?
    I would contact Blackmagic Design to make sure your drivers are current. Can you try that?
    Thanks,
    Kevin

  • OMF CS4 issue - Seperate audio tracks output as identical files on Pro Tools import

    OMF issue - seperate audio tracks outputs as identical files
    I am having some serious trouble when trying to export an OMF from a p2 DVCPROHD 720p50 project in CS4, and importing it in Pro Tools. The project is complex with over 12 hours of HD-footage and many sequences and titles.
    When exporting an OMF from a thirty minute sequence to work with the audio in Pro Tools, all four tracks turn out identically in Pro Tools on import. However, the tracks are different in the Premiere Pro CS4 timeline.
    We have tried both encapsulated and separate audio, we have tried importing the timeline/sequence into a new premiere project and exporting an OMF from the new project with no success. However, when we started a new project and simply imported one of our p2-files, and exported an omf, it worked fine, with 4 different audio tracks in Pro Tools.
    We also tried exporting 4 different OMF-files (one for each track), while having deleted all the other tracks. This remarkably also resulted in four identical tracks in Pro Tools!
    The OMF does not exceed the 2GB limitation.
    Can anyone help us? Have a project due on Monday, and need to start working on the audio ASAP.
    FMP10SH

    The "Source Channel Mapping - Default Track Format:" is set to "Use File". We recorded with a Panasonic HPX301 camera, which has three XLR-inputs, and we used all of them. So two of the tracks are identical recordings (from one of the XLR-inputs), while the two remaining are different, so in total there are three different tracks of oudio, all mono.
    When we put a p2-file into a sequence it has four tracks of audio linked to it, with the corresponding sound. So everything seems to be in order in Premiere, but for some reason they end up being four identical tracks in Pro Tools. As mentioned we tried making a new project with the same settings as in the project we are currently working, and we imported a single p2 clip. We exported a sequence with this clip as an omf with all the same settings, and this time it worked. The four tracks were different in Pro Tools when the OMF was imported. So it seems that the complexity of our project, or some setting that we are not aware of but have been altered by a mistake has made this project impossible to export correctly as an omf.
    But if there are any solutions to this we would be deeply grateful!
    thnx

  • Issue with Audio books on my 4s

    I'm having issue playing audio books on my iPhone 4s or my ipad mini. I'm running the latest ios on both.
    When I attempt to play the audio books on iTunes it works fine, yet when I transfer it to my iPhone it will play up to a point then the audio just ends yet it shows it's still playing. I've tried 3 different audio books and it's always does it at the same point.
    Is it a ios issue or is it a problem with all my audio books, they were fine when I listened to them on my iPhone under ios 6...... The audio books were bought through iTunes.

    Look at the file extension of one of the audiobooks you're talking about. If it ends with *.m4p then it reads as music in the Ipod. Follow the path "MyDocument, MyMusic, ITunes and in your ITunes folder change the extension to *.m4b then reload it into your Ipod. That should do the trick. I downloaded a ton of "This American Life" from ITunes and that was the problem.
    Anita

  • The big iChat problems. Audio/Video (now completely broken in 10.7.3), the "not-authorized" problem

    So, I am running iChat on OS X Lion 10.7.3 on an early-2011 MBP 13'' . These problems have been here for a while, though (I got my comp with 10.7.0). I have AIM/GMail/Yahoo connected..
    One problem is the issue of non-authorized people. There is a list of "not authorized" people that I have to scroll past in my "offline" section of iChat buddies before I actually get to the real offline contacts. Big note here: All these people have the address (something)@aol.com. These contacts have come up as a result of my gmail connection. You see, a few months ago Gmail and AIM did this chat unification process where @aol.com contacts can be just added into Gmail for chatting. These @aol.com copies come up asking for an invite when the REAL AIM address person talks to me. The invites leave once I press decline, but then they stay on my list as not authorized. If I delete these "not-authorized" copies, the invites will come up again and the cycle will repeat. It is a nuisance considering how much of these false contacts are on my list.
    Second problem is video/audio chat in general. This issue really applies on AIM/Yahoo—there is nothing for Gmail because people usually use the web interface which simply doesn't work with iChat video/audio. If the people used Google talk, the issue written below would probably come up.
    See, what happens is that…(now in 10.7.3), video/audio chat is simply broken, simple as that. My contacts always tell me that an error has occurred when trying to accept my video chat invite. It simply doesn't work. They are using AIM desktop in most cases. When it DID used to work (to a very limited extent, I'll say; it was hit or miss earlier pre 10.7.3, now it's just miss), it was just video but NO audio. They could see/hear me, I could only see them. When I did audio chats, they hear me, I..don't hear them (so audio chats were pointless). The only case where this problem doesn't happen is where it's Mac to Mac, iChat to iChat. VERY limited in use of audio/video chat, if you ask me.

    Hi,
    If AIM contacts have been added to your Google Buddy List then I would login to Google and remove them from there  (the iGoogle or GoogleMail web pages will show the Chat option)
    Whilst they are still in the List then the Authorization request will probably be resent (In this case it is probably being generated by the method Google are using to add the AIM names as iChat only sends it once).
    Google/Jabber Video chats is only iChat to iChat and so is Yahoo with iChat 6.
    The Yahoo App streams Video which People can be allowed to see and Audio is added in as an Audio Chat.
    The connection Process is not the same and iChat/AIM
    Jabber and Google use Jingle to Connect (in fact Google's version is not that compatible with other Jabber apps).
    This means iChat to the Standalone PC app  or any Web Browser using the Google Video Plug-in (PC or Mac) or to any Jabber app that is using a Google ID (or a Jabber ID) will not work.
    On the iChat to AIM on a PC.
    This has always been a bit of a hit and miss affair.
    Some people have no trouble but other spend ages trying to set things up and never find the solution.
    This is the Original Users Tip  (up to about AIM5.9)
    A "replacement" for that tip that has not made it across yet.
    I have yet to try Video to the Web Login version that is now on offer.
    However I would limit the Bandwidth in iChat Menu > Preferences > Video Section to 500kbps (possibly try 200kbps for 1-1 chats) as you will not know the interent speed available to the Buddy if they are using the web login.
    Comparisons
    When you compare iChat actual functions to what you would like it to do it can appear to be limited.
    On the basis that you would want your IM app to be able to have Buddies from other services listed in a Buddy list (combined) or Lists which apps do you know of can do that and Video to some of them ?
    Adium and ProteusX can both have Buddies from the major Services ina  Buddy List but don't do Audio or Video.
    Yahoo and MSN both allow the other's Buddies in the list but I am not sure about Video or Audio chats
    They cannot connect to Jabber or AIM buddies even for text chats.
    Jabber does depend on the server you use and whether that does Transports for you to have text chats with other services.
    Instructions for iChat.
    Mercury IM is a JAVA version of MSN and still has not got to Audio and Video
    Similar for aMSN
    Gizmo5 and YakforFree both died...
    Skype is Cross Platform  but is only 1-1 in Video chat.  (cost extra for 3 and 4 way chats)
    Yahoo had dropped support for their Mac version now iChat has the Yahoo option  (you can still download it  - IT being the beta it has been for  years).
    2:40 PM      Saturday; February 11, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • IChat Screen Sharing:  Audio works but video is a white screen.

    I am having a problem using iChat screen sharing with a specific computer.  We are both running OS 10.7.4.   I have a Mac Book Pro (fall 2011) and he has a iMac one to two years old.  We have tried contacting apple support but no luck yet.  We tried setting up a test user to see if the problem was user specific but encountered the same problem.  Again, video and text chat work fine.  He can share my screen with no issues.  Only when I ask to share his screen do I get a blank white screen.  Audio works and I can manipulate his curser but all I have is a white screen.  I have tried changing the resolution on his iMac but this has not helped.  Also we are both using Google Talk as the chat server. 

    Hi,
    Historically iChat Updates came in OS updates.
    Not every OS update had an iChat update but that was the way they were delivered.
    Only twice during the lifetime of iChat 3 have there ever been standalone Updates outside of this.
    Most Updates are now through the App Store but Software Update can still be used (I have mine set on Daily despite Apple's Updates normally coming on Tuesdays)
    One person stated he thought there had been a change with OS 10.8.1 saying the Build number of Messages had changed.
    In my experience it has not and when Apple do update something the build Number and Version number change.
    It is widely know that Apple send Developers and others advance copies of the OS to try out.
    Those people sign NDAs (Non Disclosure Agreements) so you will not see any discussion of any up and coming stuff on this site.
    8:55 PM      Thursday; September 6, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Ichat - AIM  no audio one way

    Hello all,
    I have seen numerous discussions posted similar to this problem but I have tried everything that seemed applicable and no luck so far...
    I'm just wondering if there is something obvious about our setup that could be causing the problem or if anyone has any helpful suggestions.
    My fiance (who is in Korea) and I can only seem to get one way audio on video conference. He can hear me but I cannot hear him. The video connection is fine.
    I have a G5 using 10.3.9 with an isight. I use AirPort Extreme and connect to a lynksys router/cable modem. He is on a PC with XP and is using AIM to connect with a logitech camera. His internet connection is ASDL but that's about all I can tell you about it at the moment.
    The funny thing is that we were using the video conference feature relatively successfully when he was in another location in the same area, but once he moved and got set up with this internet connection, the audio coming from him has not worked at all. Also, around the same time, I tried installing msn messenger v5.0 for mac, which didn't work correctly for our video chatting either. Is it possible the messenger software somehow interferes with ichat? I tried uninstalling it but am not sure if I got all associated files.
    Any suggestions would be appreciated. This is getting rather frustrating!
    Thanks,
    Kara

    EZ Jim & Ralph, thanks so much for the advice. I have read posts throughout the apple website from both of you and no one has helped me more with my mac.
    Dexter,
    Unfortunately, we have semi-resolved this problem, but we don't have a definitive answer on what fixed it. I suppose because we were both trying all kinds of different things at the same time and that is certainly not the most effective troublehsooting method out there.
    At any rate, I know after attempting tuning and many other things, he uninstalled/re-installed all of his messaging programs, which didn't seem to fix the problem. Then we realized he hadn't updated his preferences after the re-install and he had his connection on mute! LOL. It wasn't funny at the time, but its good to go back and laugh about silly mistakes.
    However, even after that realization, we still have connection issues. My audio and video for him usually are ok (i am the one using the mac and in the US), but his video freezes sometimes within seconds of making a video connection. Lucky for us his audio tends to work for longer.
    BTW, he has now signed up for Trillian to combine his multitude of messaging programs.
    I don't know if its the QoS of his internet connection or what. But we went from no audio one way to flaky video one way... I have resigned myself to live with this...
    Hope you have been able to resolve your issue!!
    Let me know how it turned out!
    Kara

  • IChat issues on 2011 17" MBP

    I recently got a 2011 17" MBP (10.6.7). I've been using a 2008 15" MBP (10.6.7).
    I communicate daily with colleagues using video iChat.
    The 2008 MPB has run iChat without any issues for months.
    When I try the 17", I get bandwidth issues (my signal breaks up at the other end, video freezes, aberrant audio) The connection doctor shows my rate of tranmission dropping dramatically. 
    I tried shutting off all other programs and it worked okay. Starting up Safari caused it to choke. I tried switching from wireless to ethernet and it had no affect.
    I tried reducing the bandwidth to 500 kbps and it didn't fix the problem.
    I can start up the 15" MPB on Wifi, connect flawlessly to the same people, even while running Safari.
    Clearly the issue is somewhere in the 17"MBP. Any recommendations?
    Don't know if this is related but it does feel like the 17" does not load web pages in Safari as fast as the 15" but I haven't documented it precisely.
    Thanks,
    Dan

    Hi,
    It does sound a bit odd.
    Most likely there is a process running that is using the Processor(s) quite heavily.
    Open the Activity Monitor (In Applications/Utilities).
    In the window there is a drop down in the top bar.
    Select All Processes in this drop down.
    The List is normally is reverse order with the things that loaded or started later near the top. (The PID numbers)
    You should find that most things you are running are above the Finder's icon.
    iChat should be listed if Open.
    iChatAgent (A support app that has no icon) should also be listed
    iChat should show a fairly small number in the CPU column and iChatAgent should be at zero.
    Depending on the Processor iChat should rise to about 20% during a Video Chat
    I would look down the CPU column first to see what is showing as being in use.
    A Web Browser should be at rest, certainly below 5% once a page has loaded.
    A Pic of mine
    I use Skitch to grab pics and edit the comments on them so it shows relatively high on my G4/1Ghz Dual Processor.  (Green Stuff)
    iChat was open but no chats were happening  (Some of the red)
    The Activity Monitor was what I had open as well so it shows CPU usege (Blue)
    The thing to look for is unexpected items listed as running.
    Compare these to the things in System Preferences > Accounts > (your account) Login Items.
    7:52 PM      Thursday; June 2, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.7)
     Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • IChat will not audio/video connect after first attempt

    Hi all, this is my first time at posting on any discussion site so please excuses my ignorance, and thank you in advance for any help you see fit to give me.
    I have had a good look through all the posts here and a good search through the web to find help as well as a 3 hour call to Apple! Still no luck yet, please help!! I come across similar problems but this seem to be a bit different?
    I am trying to connect to my family using iChat 4.0. The set up at my end is the same as my family. We both purchased at the same time in December new 24"iMac's 2.8GHz running Leopard 10.5.1. The imacs are connected via ethernet cable to new Apple Airport extremes, the new style ones. in turn the extremes are connected to new M3 X-modems then to our broadband internet connection wall sockets. We both use Zen internet as our ISP. We both have .mac full accounts
    We have both used ichat before on our old iMacs/router set up using 10.4 and ichat 3 without any problems, that was via the same ISP and at the same locations.
    We have connected to each other using Text without problems and have connected via video chat the first time we used the new set up and also some of the times when we make changes to some settings some where within the ichat or prefs settings, but only the once then it stops working. But it stops there. Most of the time we cannot connect at all apart from text. We have tried many things at both ends on the connection using all the leads I have found in these posts as well as the things Apple told me to do, but no luck.
    So far I have tried it with the Leopard firewall off (allowing all incoming connections) and also on with iChat listed as one of the apps. (this was done after the update to 10.5.1 as this update was out before we purchased the macs so it was install from day one once we started up) I have turn off the .mac encryption at both ends and on. I have set the Quicktime stream speed to the '1.5Mbps T1/ Setting' and also set the iChat Bandwidth limit to 1Mbps as well as none and other speeds. Plus other changes on the Airport extreme as instructed by Apple all of which failed and I ended up back with the original setting (after losing all internet access at one point!).
    When we try and connect via anything other than text, it starts off by trying to connect then after about 15 secs or so we both get a message at each end of the connection saying.......
    +There was a communication error during your iChat.+
    +Did not receive a respone from (our names). You can send details about this problem to apple to help improve future versions of iChat+
    Details
    +Don't Send Sent to Apple+
    The details section contains the following..... (I have replaced where my mac e-mail address would sit with (+++++)
    Date/Time: 2008-01-03 18:53:15.279 +0000
    OS Version: 10.5.1 (Build 9B18)
    Report Version: 4
    iChat Connection Log:
    2008-01-03 18:52:43 +0000: AVChat started with ID 2717944341.
    2008-01-03 18:52:43 +0000: (+++++)1: State change from AVChatNoState to AVChatStateWaiting.
    2008-01-03 18:52:43 +0000: 0x18aee740: State change from AVChatNoState to AVChatStateInvited.
    2008-01-03 18:52:48 +0000: 0x18aee740: State change from AVChatStateInvited to AVChatStateConnecting.
    2008-01-03 18:52:48 +0000: (+++++)1: State change from AVChatStateWaiting to AVChatStateConnecting.
    2008-01-03 18:53:01 +0000: 0x18aee740: State change from AVChatStateConnecting to AVChatStateEnded.
    2008-01-03 18:53:01 +0000: 0x18aee740: Error -8 (Did not receive a response from 0x18aee740.)
    2008-01-03 18:53:01 +0000: (+++++)1: State change from AVChatStateConnecting to AVChatStateEnded.
    2008-01-03 18:53:01 +0000: (+++++)1: Error -8 (Did not receive a response from 0x18aee740.)
    Video Conference Error Report:
    7.561392 @SIP/SIP.c:2719 type=4 (900A0015/2)
    [SIPConnectIPPort failed]
    Video Conference Support Report:
    0.341012 @Video Conference/VCInitiateConference.m:1582 type=2 (00000000/0)
    [Connection Data for call id: 1 returns 1
    5.001277 @Video Conference/VCInitiateConference.m:1597 type=2 (00000000/0)
    [Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
    5.015026 @Video Conference/VCInitiateConference.m:1701 type=2 (00000000/0)
    [Initiate Conference To User: u0 with Remote VCConnectionData: 1 with Local Connection Data: 1 conferenceSettings: 1]
    5.560358 @SIP/Transport.c:2353 type=1 (00000000/0)
    [INVITE sip:user@[rip]:16402 SIP/2.0
    Via: SIP/2.0/UDP [lip]:16402;branch=z9hG4bK324adc9245ffbda5
    Max-Forwards: 70
    To: "u0" <sip:user@[rip]:16402>
    From: "0" <sip:user@[lip]:16402>;tag=1028680691
    Call-ID: 1452b6ae-ba2d-11dc-b315-c8edfa8e4012@254-179-33-3
    CSeq: 1 INVITE
    Contact: <sip:user@[lip]:16402>;isfocus
    User-Agent: Viceroy 1.3
    Content-Type: application/sdp
    Content-Length: 781
    v=0
    o=James 0 0 IN IP6 lip
    s=0
    c=IN IP6 lip
    b=AS:2147483647
    t=0 0
    a=hwi:1056:2:2800
    a=iChatEncryption:NO
    a=bandwidthDetection:YES
    m=audio 16402 RTP/AVP 110 121 12 3 0
    a=rtcp:16402
    a=rtpmap:121 speex/16000
    a=rtpmap:122 speex/8000
    a=rtpmap:113 X-AAC_LD/44100
    a=rtpmap:110 X-AAC_LD/22050
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:2018669853
    m=video 16402 RTP/AVP 123 126 34
    a=rtcp:16402
    a=rtpmap:123 H264/90000
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO 16402 VIDEO 16402
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
    a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
    a=rtpID:3535381580
    6.060792 @SIP/Transport.c:2353 type=1 (00000000/0)
    [INVITE sip:user@[rip]:16402 SIP/2.0
    Via: SIP/2.0/UDP [lip]:16402;branch=z9hG4bK324adc9245ffbda5
    Max-Forwards: 70
    To: "u0" <sip:user@[rip]:16402>
    From: "0" <sip:user@[lip]:16402>;tag=1028680691
    Call-ID: 1452b6ae-ba2d-11dc-b315-c8edfa8e4012@254-179-33-3
    CSeq: 1 INVITE
    Contact: <sip:user@[lip]:16402>;isfocus
    User-Agent: Viceroy 1.3
    Content-Type: application/sdp
    Content-Length: 781
    v=0
    o=James 0 0 IN IP6 lip
    s=0
    c=IN IP6 lip
    b=AS:2147483647
    t=0 0
    a=hwi:1056:2:2800
    a=iChatEncryption:NO
    a=bandwidthDetection:YES
    m=audio 16402 RTP/AVP 110 121 12 3 0
    a=rtcp:16402
    a=rtpmap:121 speex/16000
    a=rtpmap:122 speex/8000
    a=rtpmap:113 X-AAC_LD/44100
    a=rtpmap:110 X-AAC_LD/22050
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:2018669853
    m=video 16402 RTP/AVP 123 126 34
    a=rtcp:16402
    a=rtpmap:123 H264/90000
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO 16402 VIDEO 16402
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
    a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
    a=rtpID:3535381580
    7.061182 @SIP/Transport.c:2353 type=1 (00000000/0)
    [INVITE sip:user@[rip]:16402 SIP/2.0
    Via: SIP/2.0/UDP [lip]:16402;branch=z9hG4bK324adc9245ffbda5
    Max-Forwards: 70
    To: "u0" <sip:user@[rip]:16402>
    From: "0" <sip:user@[lip]:16402>;tag=1028680691
    Call-ID: 1452b6ae-ba2d-11dc-b315-c8edfa8e4012@254-179-33-3
    CSeq: 1 INVITE
    Contact: <sip:user@[lip]:16402>;isfocus
    User-Agent: Viceroy 1.3
    Content-Type: application/sdp
    Content-Length: 781
    v=0
    o=James 0 0 IN IP6 lip
    s=0
    c=IN IP6 lip
    b=AS:2147483647
    t=0 0
    a=hwi:1056:2:2800
    a=iChatEncryption:NO
    a=bandwidthDetection:YES
    m=audio 16402 RTP/AVP 110 121 12 3 0
    a=rtcp:16402
    a=rtpmap:121 speex/16000
    a=rtpmap:122 speex/8000
    a=rtpmap:113 X-AAC_LD/44100
    a=rtpmap:110 X-AAC_LD/22050
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:2018669853
    m=video 16402 RTP/AVP 123 126 34
    a=rtcp:16402
    a=rtpmap:123 H264/90000
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO 16402 VIDEO 16402
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
    a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
    a=rtpID:3535381580
    Video Conference User Report:
    0.000000 @:0 type=5 (00000000/16402)
    [Local SIP port]
    0.000018 @:0 type=5 (00000000/16402)
    [Local SIP port]
    7.754039 @Video Conference/VideoConferenceMultiController.m:1476 type=5 (00000000/0)
    [IP And Port Data With Caller IP And Port Data: Obtained 200 bytes of local IP and port data (5 entries). Remote data was 0 bytes (0 entries).
    Binary Images Description for "iChat":
    0x1000 - 0x230fff com.apple.iChat 4.0 (601) /Applications/iChat.app/Contents/MacOS/iChat
    (plus the rest of the stuff)....... this means very little to me.
    I may have left out some vital information, and if so sorry but just ask and I'll fill it in if it can help solve the problem for us.
    If anyone can help with this matter than many thanks in advance.

    Hi Ralph,
    Thanks for the links. I have had a look at the ADSL Nation web site, and yes I did set my modem up as they state, the DNS server was removed.
    Thinking back to when I had just the modem connected straight to the computer without the Airport (as per you suggestion) and iChat worked including the video, it would make me think that the problem lays with the Airport? But by the sounds of your last post the Airport does not have settings to be able to change DoS or SPI or it does not make any difference anyway/ or it Automatic?? Is that what you mean?
    I have noticed on other posts people talking about having a list of ports open for iChat. As on your web site as well. However I think your web site is looking towards iChat3, I think? I'm think that iChat 4 is different when it comes to port opening??. Is this something I have to set up on the Airport and if so how? The list of ports go something like this, that I've seen.....
    5190, 5220, 5222, 5223, 5298 TCP and 5060, 5190, 5297, 5298, 5353, 5678, 16384-16403 UDP
    I just saw this in a new post.( http://discussions.apple.com/thread.jspa?threadID=1331562&tstart=0 )
    Are they ports on the Airport or iMac? I was thinking that by adding the iChat to the list on the Firewall that all the ports that need to be open would be opened by Leopard? Or do I need to do this manually as well on the Airport? Does Bonjour have anything to do with this? Is that something I need to look into.
    Thanks for the on going help with this one, it seems to be a strange one!

  • OSX 10.8.5 + Pro Tools 10: Very strange issues - Firewire audio interface

    I'm facing weird issues on my new system.
    When I received my new iMac, I firstly used Migration Assistant. It didn't work well so I did a clean install. I installed the Digi003 drivers first, then PT, then all the plugins. Everything is up to date. Interface and computer are connected with a Firewire 400/800 cable and a brand new Thunderbolt/Firewire adapter. The computer is used for music production only and the hard drive is almost empty (not much data).
    I know the Digi003 works fine as I used it with my former iMac which was a Core2Duo 3gHz with 4Go RAM running OSX 10.6.8 and PT 10.0.0. I used to set the buffer size  on 128 to record audio. It worked well.
    THE PROBLEMS ARE:
    1- DigiAudioCore does not auto-launch anymore. If want to play a song with VLC, I have to manually launch DigiAudioCore.
    2- PT stops (-6086) if I record with the buffer size set on 128. Buffer size on 256 is the minimum and PT still bugs sometimes even if there is only one track and no plugins in a 44.1kHz / 24bits session.
    3- CPU spikes too if I have just a couple of plugins engaged.
    4- I did some tests with an RME Fireface 800 and a Motu 828 MKII and I got the same issues (-6101). I still have to do a test with an USB interface.
    5- Sometimes the iMac bugs when I open the System Prefs but it works normally after a few seconds.
    I don't know what are the causes but it seems that there is a bandwidth problem caused by Thunderbolt/Firewire connection. I tried a brand new FW800 cable between the Fireface 800 and the computer but I got the same issues. Maybe the hard drive???
    So now I really need some help to solve once for all these problems. I hope I don't have a do a clean install again!!!
    Thanks in advance.
    COMPUTER SPECS
    iMac 27" bought october 2013
    Processor: i7 3.5gHz (Turbo boost 3.9gHz)
    Memory: 32Go RAM DDR3
    Hard drive: Fusion Drive 1To
    OSX: Mountain Lion 10.8.5
    INTERFACE & DAW
    Digi003 Rack+ (drivers up to date)
    Pro Tools 10.3.7

    Back up all data immediately as your boot drive may be failing.
    This diagnostic procedure will query the system log for messages that may indicate a hardware fault. It changes nothing, and therefore will not, in itself, solve your problem.
    If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|n Cause: -' | tail | open -ef
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.

  • Ichat video and audio is not working only with one friend

    Hi there,
    i used to video-chat with my best friend every other day. We both have OSX 10.5.8. Maybe 4 weeks ago suddenly we always get an errorcode when calling each other. Sometimes it says the other one doesnt anwer but he gets an error message. He and me can still video chat with all our other friends!
    Only in between us it doesn't work. Both ways don't work (who ever calls). We both have an iMac 21.' with intel prozessor.
    Text-chat works!!
    If another friend calls both of us, we can chat the 3 of us together!
    Any suggestions?
    desperatly Mike

    Hi,
    This has been an issue now and then for all versions of iChat
    http://www.ralphjohns.co.uk/page15.html#CertainBuddy
    The most common reason is setting Port Forwarding in a router to open the ports and leaving On the DHCP Server.
    This means that now and then the Computer IP may change and the Port Forwarding may require you "point It" at one IP - which the computer no longer has meaning the ports are not open.
    The next is the way some devices actually Do NAT (Network address Translation).
    There are 4 main ways with cross over between them as well.
    This may raise it's head if you or your Buddy have updated the Firmware to your router.
    I would check System Preferences > Quicktime > Streaming is at 1.5Mbps at both ends.
    I would double check the routing settings at both ends.
    UPnP if you have it is "Better" is that it allows Multiple computers (IPs) to use the same Ports so you don't have to turn Off the DHCP Server in the router.
    Thomson-Alcatel can have symptoms like this due to the way they handle SIP data.
    9:18 PM Wednesday; October 6, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • IChat video an audio buttons greyed out & contact list busted.

    Hi folks...
    I hope someone can help me. I just tried using my IChat again today and noticed that I can not make video or audio calls at all. Both buttons are completely
    greyed out and disabled. Then again they sometimes reactivate and suddenly start working... why the sporadic randomness? Simple text chat is fine but video and audio buttons are dead.
    Also I have non active and UNAUTHORISED contacts on my list that I just can not get rid of no matter what. I select the names.. go to EDIT/DELETE, they are removed only to re-appear a few seconds later in my list.
    I noticed too that I do not have a com.apple.ichat.plist on my machine at all.. is this normal?
    Thank you for your time..
    Chris

    Hi,
    The first thing that strikes me is that this is a Jabber account.
    You cannot Video to Non iChat sources.
    That means not to GoogleTalk Buddies that are logged in via a web Browser or PC users logged in with the App called GoogleTalk or any other Jabber app on Mac or PC.
    iChat Video with Jabber IDs is iChat to iChat only.
    Also check the View Menu > Show Statuses
    You can turn Off Show Video Status and your own Video icon will show but all your Buddies will display Audio Only icons
    Turn that off as well and you get a Buddy List like yours  (no green icons for Buddies).
    This will effect AIM and Jabber Buddy Lists alike as well as the Bonjour one if you have it active.
    Deleting Buddies
    It should be a question of Highlighting them and using the backspace key and confirming the delete message that pops up.
    Or using the Remove option in the Video menu.
    However there are a couple of quirks that have to be looked into.
    1) Any log in to the same Buddy list either on the same computer is a different App or on a different computer.
    2) Any web Login that may be active.
    2a) Active might be a site that has a delayed "Keep Me Logged in" option if you don't specifically Log out.
    Both Google and AIM have default periods of two weeks which is then kept "alive" if you keep logging in a web browser or using an App on a phone.
    As there is constant communication between the app and the servers the Buddy list is constantly and instantly updated as buddies come on Line or change Status or go Off line.
    Another Login will keep telling the server that "this is my Buddy List" and replace names you are trying to remove.
    Make sure you are logged out of any other login, iPhone app, Web Browser on phone or Mac or another computer.
    10:04 PM      Friday; March 29, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Issue where audio files are causing buffering in Adobe Presenter 9.0.2

    I have a module that I have published that the audio files are causing the playback to buffer at the end of the slides. I have unchecked Disable preloading of embedded Flash content, since I have seen that suggestion previously causing issues. I do not have videos in this module. It did this when I did a preview of my PowerPoint presentation. Thinking publishing could give me a possible different outcome once it was on the Connect server. However, the same issue occurs. I have tried copying the slides and placing them into a new presentation but that did not work as well, I had the same issue. Any suggestions on how to fix this? I am at a holding point since I cannot make the course live if I know this is an issue on playback.

    Hi kornieme,
    Please package the published content using package option in presenter and put it in some drop box and send me the link..
    Thanks
    Sidhartha

  • Rendering issues? Audio is not in sync with video

    im very very new to after effects and im jumped straight into the deep end of things, i downloaded a rendered template with a audio file to go with... when i render it in AVI it also seems like the video is way to slow for the audio and doesn't match up! I have no idea what to do or try or what im looking for, so any help would be massively appreciated! thank you so much for your time

    Other than what Mylenium suggests, there isn't a whole lot else we can do.  It is a very unwise thing to jump into using AE without introducing yourself to the basics, because the application contains too many ways to foil the uninitiated.  Furthermore, since you don't know the arcane AE lingo, there are also translation issues to deal with.
    Almost NO ONE successfully learns AE intuitively.  Those who are successful have last names that begin with the letters "ein" and end with "stein".  Almost EVERYONE has to start with the basics.  Here is a very good introduction to the basics.
    Fight the temptation to jump right into AE.  You do so at your peril.

  • Any issues with audio in OS X Yosemite?

    After installing, the audio is disabled.  I searched some other forums and saw that a reboot may work.  But that did not do anything.  Is anyone else having this problem with a MacBook Air?  Thanks.

    GautamBahl wrote:
    Hi Foo Fighters,
    Adobe is currently working with Apple to test interoperability with current Adobe products and will share any discovered issues when the OS is officially released.
    Please refer to below article.
    http://helpx.adobe.com/x-productkb/global/creative-cloud-apps-yosemite.html
    Thank you for posting on Adobe Forums.
    OS X Yosemite is now officially released, so will you please share those discovered issues?

Maybe you are looking for