IChat leopard with low audio, only one speaker playing

Anyone else have low sounding audio in ichat during video chats? The incoming audio only plays through one speaker and its very low in volume, ive checked all my sound settings and they are correct. I also tried with speakers plugged in and the sound still only plays from the laptop speakers

Ask your Buddy to go to System Preferences > Sound > Input and to turn themselves up.
9:01 PM Thursday; November 1, 2007

Similar Messages

  • I'm iphone 4 and when i play music only one speaker plays it loud but the other one is too low.

    I'm iphone 4 and when i play music only one speaker plays it loud but the other one is too low.

    If you are referring to the speaker(s) along the bottom edge, there is one speaker, one microphone.

  • When I plug in headphones or use audio jack only one speaker works.

    I have an iphone 4g.  When I plug in headphones only one side works.  When I plug into my car audio jack...only one car speaker works. 

    There is only one speaker, the other side is the microphone.

  • Only one speaker working with Airport Express

    Hi,
    Hoping for some help. I just connected an Airport Express to my stereo but only one speaker (left) is working. I plugged in headphones to the jack in the AExpress as suggested in other postings and both left and right work there. I have checked and updated Airport Extreme base station and Airport Express firmware software.
    I have an older amp (connecting the RCA cables to the TAPE ports since there is no AUX) but both speakers work for everything but the AirTunes.
    I am hoping there is a fix since I would really like this to work.
    Thanks for any suggestions.
    -Jane
    Mac OS X (10.4.8)

    Thanks for your response and sorry for the delay in
    responding. I did take the first set of cables we got
    (Y-adapter 2-male to 1-mini) back because we thought
    that was the problem. However after I exchanged for a
    new cable we have the same problem. I am thinking
    that the chances are that we would get 2 sets of bad
    cables are pretty slim.
    In both cases only the red cable worked for both
    speakers but if we only plug in the black cable into
    either speaker channel in the amp you can faintly
    hear the music and some static.
    Arg.
    Mac OS X
    (10.4.6)
    Did you ever get the problem with airtunes just playing through the one speaker? I have the same problem...reckon it is a faulty input port on the express. Did you try an optical cable? It might work as it works differently.
    Gaz

  • Ipad Mini Headphones -- Sound in only one speaker

    Today I used the Ipad Mini with headphones and there's only audio in one speaker. I did a hard reset, have tried different applications, and even another set of headphones. The problem persists.
    Any ideas on good next steps? Thanks.

    Nevermind, I restarted the computer again and it seems to be working fine now  

  • Old computer I had is OSX Snow Leopard with Entourage. New one is OSX Mavericks. Using Mail where are my addresses and old address book. Transferred old computer backup by Time Machine and other things work? Can't see a symbol for address book.

    Old computer I had is OSX Snow Leopard with Entourage. New one is OSX Mavericks. Using Mail where are my addresses and old address book. Transferred old computer backup by Time Machine and other things work? Can;t see a symbol for address book.

    Where are addresses kept on MAIL?  I don;t like the new format at all. Frances
    Begin forwarded message:
    From: Frances Topping <[email protected]>
    Subject: Re: - Old computer I had is OSX Snow Leopard with Entourage. New one is OSX Mavericks. Using Mail where are my addresses and old address book. Transferred old computer backup by Time Machine and other things work? Can't see a symbol for address book.
    Date: August 25, 2014 at 9:46:01 AM EDT
    To: discussions-replies <[email protected]>
    Old Entourage is POP and new Mavericks MAIL  is IMAP I believe. I don;t know how to export in the forms you mention. Frances

  • HT4060 iPad will not charge if hooked by USB to pc or plugged into wall.  How do I know if the problem is with iPad, cable or power adapter.  I have a 12, 10 and 5W adapters no success with any.  Only one lightening cable so can't swap cables.

    iPad will not charge if hooked by USB to pc or plugged into wall.  How do I know if the problem is with iPad, cable or power adapter.  I have a 12, 10 and 5W adapters no success with any.  Only one lightening cable so can't swap cables.

    I'm sorry but this is too funny to pass up. 

  • Printing invoices with VF31 in only one spool request

    Hello,
    we want to print a number of invoices with VF31 using only one spool request, as at this time we become one spool request for each document.
    The problem is that VF31 calls indirectly RSNAST00 and this program makes a call to the print program where we have OPEN_FORM and END_FORM each time, so this creates one spool request every time the program is called.
    Is there a way to print in only one spool request without doing big changes to programs?
    Thanks and regards.

    Hi,
    To append to an existing spool, see the SAP Notes 85318 and 16410.
    For spools to be appended the parameters 'New spool request' and 'Do not Append Print Jobs' must be set to 'No' by the application creating the spools.
    For Sapscript, when the application call the function module OPEN_FORM in your print program, you can transfer a structure ITCPO to the parameter OPTIONS. Via ITCPO-TDNEWID, you can select the option 'New Spool Request'.Via ITCPO-TDFINAL, you can can select if the spool is closed.
    Regards,
    Aidan

  • Create user with select privilege only one schema

    can someone tell me how i can create user with select priviliges only one schema.
    i don't want the user to have any select privileges with other schema.
    can someone advise me.
    Thansk

    In general, you would do something like
    CREATE ROLE abc_read_only;
    FOR x IN (SELECT * FROM dba_tables WHERE owner='ABC')
    LOOP
      EXECUTE IMMEDIATE 'GRANT SELECT ON abc.' || x.table_name || ' TO abc_read_only';
    END LOOP;
    CREATE USER your_user ...;
    GRANT abc_read_only TO your_userYou create a role, grant the role SELECT access to all the tables in the ABC schema (you can extend this to grant access to views, functions, etc depending on the requirements), and then grant that role to your user.
    Justin

  • Hi, I have installed boot camp with wins xp home but i can't get on line with it. can only one help please.

    Hi, I have installed boot camp with wins xp home but i can't get on line with it. can only one help please.

    Please close this thread, I have managed to get a hold of a DVD including all the drivers, so I suppose that will work, if not one way then another.
    Thank you for the quick answers.

  • HT2995 Only one speaker works when playing music. Is this normal?

    Only one speaker works when playing music. Is this normal?

    This being the Mac mini forum, I naturally presumed you were asking about a mini. But in any case, there's only speaker in an iPhone as well.
    Regards.

  • How to set a keyframe with setValueAtTime for only one axis?

    Hi,
    I´d like to set a keyframe for the layer´s scale, anchor point values but separately. Let´s say I want to add the following keyframes to a layer:
    time: 0, value: 100, axis: X
    time: 0.3, value: 10, axis: Y
    time: 1, value: 110, axis: X
    If I use setValueAtTime(time ,[x, y]) it always places a keyframe for both axis.
    How can I set a keyframe with setValueAtTime for only one axis?
    Regards,
    Thomas

    Dan, thanks for your fast reply. But the problem is a bit difficult to describe for a german like me
    I´m try to convert given keyframes from another application. Let me visually show how it handles keyframes that are set on different axis at different times:
    X: O---O---O
    Y: ---O--O-O
    You see when the user sets a keyframe and both axis were modified, both have a keyframe (see the last key). But if only one axis is transformed and the other not, there is only one keyframe. The problem that I try to solve is that AE is only able to set a keyframe for both axis at a given time. So if I set the 3 keyframes of the X axis first, the AE script will set keys on the Y axis simultaneously. That´s bad because it adds keyframe to the other axis where there is no value "cache". So if I would set all keyframes it would look like this:
    X: O--•O-•-O
    Y: •--O•-O-O
    The small dots indicate those "forced" in-between keys.
    So is there a "native" scripting way to separate the dimensions (like the position prop) for other props and add independent keyframes?

  • Whenever  i  insert a headphone in my ipad 2 only one speaker comeswhenever  i  insert a headphone in my ipad 2 only one speaker comes

    whenever  i  insert a headphone in my ipad 2 only one speaker comes

    Have you tried another headset?
    Do you have a case on your iPad that is preventing the jack from being pushed all the way in? (Try it without the case).
    If not to all of these you have a damaged headphone jack and you will have to get it fixed.

  • HT1349 Only one speaker works on my iphone4, how can I repair this or is there a setting I can change that I am unaware of?

    I have found only one speaker is working on my iPhone 4.
    IS there a setting I am unaware of or something I can do to fix it?

    If you are referring to the speaker at the bottom of the iPhone, there is only one speaker. The other similar looking item is a microphone.

  • How can i leave audio from one clip playing, while showing another one in i

    i am editing a movie, using iMovie 08, and want to use sound for a clip in the video for the end credits. how can i do this?
    just to be clear, i am not trying to add audio. i am trying to leave the audio from ONE CLIP playing, while viewing a new frame. thanks.

    This is simple in iMovie 11 (drag and drop), but in iMovie 08, you can still do it.
    [See this blog post for details|http://imovie08.blogspot.com/2007/08/how-to-extract-audio-from-clip.htm l]

Maybe you are looking for