Ichat not working after recent Lion OSX update. What happened?

After installing todays update of Lion, my ichat does not work. It will not let me log in, only displaying "ichat cannot communicate with the account."

What recent update?  The last Epson R220 update for non intel Macs was 08/19/10:  http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=60202&prodoid=58654 761&BV_UseBVCookie=yes&infoType=Downloads&platform=Macintosh&x=21&y=13
What happens when you click on the EPSON Printer Utility which should be inside the Utility folder?  Have you tried repairing permissions and restarting your computer?  Have you read Epson's user manual and/or contacted their tech support?
I also have the R220 model.  Besides using their drivers, I also use the Gimp drivers:  http://gimp-print.sourceforge.net/MacOSX.php

Similar Messages

  • Camera (Skype, FaceTime, iChat) not working after installing Maverick OS

    camera (Skype, FaceTime, iChat) not working after installing Maverick OS

    kwmaclean wrote:... same problem...
    If How to Troubleshoot iSight doesn't help, Reinstall OS X.
    Message was edited by: EZ Jim
    Mac OSX 10.9

  • Quicktime not working after loading Lion. It is in Applications folder. It is dark when trying to play. Audio is there, no video. Is something set wrong?

    Quicktime not working after loading Lion. It is in Applications folder. It is dark when trying to play. Audio is there, no video. Is something set wrong?

    It is supposed to be dark.
    Is it all videos that don't display or just some. You may have installed something like Perian or Flip for Mac that translates the video codecs for Quicktime. They may need updating.

  • Home button not working after 5.0.1 update

    Ok now the home button not working after 5.0.1 update.  Anyone have any ideas?  How do I roll backfrom this update?

    This happened to me as well.  AT&T had me reset my network settings and this fixed the problem.  Here is how...
    Settings > General > Reset > Reset Network Settings
    "For now" the problem is fixed for me.

  • Mp600r does not work after installing mavericks 10.9 what do I do now ?

    Canon Mp 600r does not work after installing Mavericks 10.9 What do I do now ?

    This thread should help:
    https://discussions.apple.com/message/19407500#19407500?ac_cid=tw123456#19407500

  • My MacBook adaptor stopped working so I used my roommates. Now hers doesn't work after just one day. What happened?

    My MacBook adaptor stopped working so I used my roommates. Now hers doesn't work after just one day. What happened?

    Hello, cherilyn.  
    Thank you for visiting Apple Support Communities.  
    I understand that a couple MagSafe adapters will no longer charger a couple MacBooks.  Here are the best troubleshooting steps to go through when experiencing this issue.  
    Apple Portables: Troubleshooting MagSafe adapters
    Cheers, 
    Jason H.  

  • My imessage is not Working after recent update

    My daughters iMessage & FaceTime no longer work after recent update, can anybody help please?

    It's mostly a server issue because millions of users are trying to do the same. Apple's servers get bogged down. Try waiting a bit - a day - before trying again. You can also check out this for other things to try.

  • Apper not working after recent update

    Hi everyone,
    with today's update of pacman, apper stopped working, any solution to get it back and running? I get this in the terminal:
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    enumFromString ( Role ) : converted "" to "UnknownRole" , enum id 0
    enumFromString ( Group ) : converted "" to "UnknownGroup" , enum id 1
    enumFromString ( Filter ) : converted "" to "UnknownFilter" , enum id 3
    Error, cannot create transaction proxy
    QDBusError("com.trolltech.QtDBus.Error.InvalidObjectPath", "Invalid object path: Process /usr/lib/dbus-1.0/dbus-daemon-launch-helper received signal 5")
    Error, cannot create transaction proxy
    QDBusError("com.trolltech.QtDBus.Error.InvalidObjectPath", "Invalid object path: Process /usr/lib/dbus-1.0/dbus-daemon-launch-helper received signal 5")
    and in the GUI i get "an error occured" for everything, no package list, no nothing.
    Thanks.
    Edit: it started to work after a forced repo update today.
    Last edited by LyCC (2013-04-06 07:19:42)

    At my computer, there was a problem with the configuration file of pacman (/etc/pacman.conf). Do something with pacman in the terminal, and see if there is an warning message of pacman. After I updated the configuration file, the problem with Apper was gone.
    When solved, please change the subject with [SOLVED].

  • Touch ID not working after IOS 7.1 update

    Touch ID will not work after the recent update, rebooted iphone to no avail. I then deleted all finger prints, but iphone will not recognise new fingerprints ..... Annoyed is not the word ! Any ideas ?

    I'm like, Touch ID almost dead, we're going apple fixex this.
    Seems it only is affecting the white model

  • My iPad orientation is not working after the IOS 8 update.  Please fix this bug!

    my iPad air orientation is not working after the IOS8 update.  Can you fix this bug? Thx

    Did you try a reset?
    Restart / Reset
    http://support.apple.com/kb/HT1430

  • Drobo not working after 10.5.8 update

    My drobo stopped working after 10.5.8 update. Now I lost all my data on the drobo. this doesn't make me happy.

    'We are using the USB interface (as opposed to firewire) because we want to share the drive across the network - it's not always about speed.'
    This makes absolutely no sense to me.. but maybe I am wrong : Because firewire is much more reliable than USB and manages to keep highest transfer rates (without jumping up and down as USB would do as soon as I/Os go up...) Especially on a Mac ! (only for the latency I am not too sure, but I guess it is similar on fw and USB.. just increase the caching if you stream hd movies on the network...
    From my experience, sharing a USB drive on the network is probably much worse.. you can find example on the web.. (Orb, Plex and else will start drop frames when connecting to a USB shared drive.)
    I currently use my drobo plugged to my Mini with a fw800 to 400 cable,4*1.5tb hdds, I also share it on the network with gigabit ethernet, and get much better performances than any usb shared drive.
    Sorry I do not have any precize measurement, but I can upload or download a 6tb file in about 10minutes over gigabit ethernet, and I guess the bottleneck is now the Drobo controller...
    The protocol you use may have an impact as well (afp, smb,...) but whatever you use, I suppose Firewire will be faster.
    As a general advice, do not update or upgrade anything in general before you have a backup of your data, this is true for any storage system, Drobo or not.
    Oh, and Data redundancy on a raid is not a backup of course.
    Vincent
    Message was edited by: v1ncen7

  • External monitor Syncmaster 2494SW not working after 10.6.7 update

    External monitor Samsung Syncmaster 2494  SW stopped working after 10.6.7 update on 2011 MacBook Pro. I'm using miniDP-DVI adapter. The monitor shown correctly in Display Properties with right modes and name. MackBook recognizes connection but the monitor goes to PowerSave mode (LED indicator blinks).
    Safemode boot, SMC reset, PRAM reset did not help.
    Exactly the same setup works perfectly under 10.6.6.

    HERE IS THE EASY FIX SOLUTION FOR THIS PROBLEM GUYS:
    I have an 15inch MacBook Pro that I've just installed Snow Leopard 10.6.3 on.
    Prior to this install, I've had it hooked up to my Samsung SyncMaster 2243 via an Apple MDP/VGA adapter and a third party VGA cable. It has been flashing on and off a black screen every now and then for the past 2 years and I googled that it was just a crappy communication between the MBP and the Samsung... but now since installing 10.6.3, the Samsung display just flashes the desktop for a second then turns black for good - occationally flashing analogue/digtal prompt display. Tried everything for hours. Nothing worked, thought I was gonna have to buy a new all Apple VGA lead then came across Michael's above solution. Tried it and it worked IMMEDIATLY!!! And the monitor doesn't flash black anymore AT ALL!! Whoo-hoo!! Thanks heaps.
    WHAT TO DO TO FIX:
    Go to => System Preferences  => Energy Saver => change graphic settings to Higher Performace.
    Cheers!!

  • IPod touch not working after 5.0.1iOS update

    It seems like a lot of people are having issues after the new 5.0.1iOS update. I want to share my frustration and what problems I'm facing. After the update my ipod won't sync properly. It freezes my computer and then my computer shuts down everytime I have my ipod connected to my computer. My music and apps on my iPod are like ghosts they are visible but do NOT work after being pressed. I tried resetting the ipod, same problem. I uninstalled and reinstalled iTunes, same problem. There is only problems with my computer when the iPod is plugged into the computer and trying to update. I am so ANGRY because I love my iPod and I can't use it to listen to music or communicate with my family and friends. I hope Apple will help all of us soon and fix these HUGE bugs, and FAST.

    Have you tried the sandard fixes:
    - Reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Retore from backup
    - Restore to factory defaults/new iPod.

  • Trackpad not working after 10.8.4 update

    Macbook Pro with Retina Display late 2012. Trackpad clicking function stopped working after 10.8.4 update. Any advice? I've tried zapping the pram, resetting the smc. Nothing helps.

    Apple store genius bar appointment is the best option for a positive resolution.
    Ciao.

  • Facetime not working after Mountain Lion update

    I have a Macbook Pro. After I updated to Mountain Lion (from Lion), Facetime no longer works. I've tried with multiple people, but they aren't receiving my calls and I'm not receiving their calls. In Lion Facetime worked fine, but now it's not working. I also can't get iMessages to work. This is very frustrating, because I was really looking forward to iMessages. My Macbook Pro is still new, I purchased it in the first week August (2012). It came with Lion already installed. It's only 2 months old now. So I know my computer can support all of Mountain Lion's features. By the way, I'm running on Mountain Lion 10.8.2. Any help would be great! Thanks

    Hi,
    The two may be linked as there is a common support app called IMAgent that helps with both Messages and FaceTime.
    Shut down both apps.
    With the Finder as the Front App > use the Go Menu > Hold down ALT key and select Library.
    In the Library find and open th Preferences Folder
    Find com.apple.IMAgent.plist and drag it to the Trash
    Before restarting the App now go to Activity Monitor in Applications/Utilities.
    Find imagent (it  is in lower case).
    Highlight and use the Quit button.
    Now restart the app(s).
    This will recreate the .plist  from defaults.
    8:34 PM      Thursday; September 27, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and and iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

Maybe you are looking for

  • Adobe Photoshop Lightroom 64-bit has stopped working [Lightroom 5 Beta]

    I was looking for a Lightroom 5 Beta forum but am unable to find one.  Today, I downloaded and installed LR5 Beta on my new HP Envy 64-bit Windows 8 machine.  After running an installation, I started the program.  At first, it asked about opening a c

  • New task record not getting created in BPM workspace.

    Hi, We have a BPM Process which has 2 roles. SKURequester and SKUChangeAnalyst. When we initiate the flow , it opens up a screen and we populate data and click "SUBMIT". It goes to ChangeAnalyst for approval. It is working fine in Development Env.We

  • Hi There, Any one Know How To Call Workflow Process From Special Menu.

    Hi There, Any one Know How To Call Oracle Workflow Process From Special Menu. I mean Tool -> Special Menu 1-45 Or How to call Oracle Workflow Process From Command Button. Thanks Bachan.

  • Using PDF creator with excel documents scanned

    Hello, I´m using for the first time PDF converter and it isn't working as I expected. I'm trying to convert to excel a scanned document (created in excel) but it doesn't recognize all the number, it lefts a lot of blanked lines, unconfigures everythi

  • Browser upload window too large

    After downloading Yosemite, the drop down window that comes open when uploading files for emails or imessage is now so large that I can't see the Open or Cancel buttons.  How do I resize this?