Ichat problems with -8 code for video and audio

I'm trying to connect with the test sites you've provided.
1) Have you done the Quicktime Streaming setting ?
yes
1.5mgs
2) Are you running your Mac with the Firewall On ?
Yes, ports are set, including 443 because I could only get on with 443, not 5190. Also, I have the ports set up in my modem with static IP to computer
3) Did you upgrade from Panther ?
no; bought computer with OS 10.4
4) How are you connected to the internet ?
Wireless DSL modem (Qwest)
a) We need to know device make and Model ?
Actiontech GT701-WG
b) We need how you have opened the ports for iChat ?
* Port Forwarding
c) We need to know if you know if the device is in Bridge Mode ?
no
d) Do you have a router as well ?
no
5) Do you have any iChat Add-Ons ?
no
7) Does it have anything to do with connecting to a PC ?
no
8) List your Connection speed
1536k

If not Saving one by opening it with the Details options they are stored in Users/(your account)/Library/Logs/iChatConnectionErrors
Check the Actiontec for any SPI or DOS setting.
Also does it Block Anonymous pings from the internet ?
8:20 PM Tuesday; December 4, 2007

Similar Messages

Problems with html code for video

Hello
I followed this instructions to add my video:
- Upload the files in Muse < Add Files for upload ( These would add the files to your assets )
- Object > Insert HTML :
<video width="320" height="240" controls>
<source src="assets/video.mp4"/>
</video>"
My actual code is:
<video width="720" height="576" controls>
<source src="assets/Gelo.mp4"/>
</video>
And here's the problem when I preview:
Can someone help? What's wrong?
Thank you

Hi
Please check if the files are correctly added to your site, also the format should be supported by browser so you can check with different video formats.
Thanks,
Sanjit

Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Hi Chhayank,
the problem is not the exported xls. If you have a look inside with Notepad or something like that, you will see that your leading zeros are exported correct.Excel-settings occurs this problem, it is all about how to open the document. If you use the import-assistant you will have no problems because there are options available how to handle the different columns.
Another solution might be to get familiar with ABAP2XLS-Project. I got in my mind, that there is a method implemented, that will help you solving this problem. But that is not a five minute job
~Florian

I still have a warranty but it will be out in a week. i previously have a sound distortion problem with my mac for months and suddenly it just fix itself. what should i do? i'm worried that it will comeback and i dont have a warranty anymore.

i still have a warranty but it will be out in a week. i previously have a sound distortion problem with my mac for months and suddenly it just fix itself. what should i do? i'm worried that it will comeback and i dont have a warranty anymore.

JoBautista,
you still have the option (before your warranty expires) of purchasing an AppleCare Protection Plan, which will provide an additional two years of coverage. Once your warranty expires, you will no longer have the option of purchasing AppleCare.

Problem with iWeb asking for username and password to access my public site

Today for some reason anyone trying to access my site is being asked for username and password. I have made no changes that would require a password. My site has always been public.

I am having the same problems. My site is public, I checked the settings on the public folder on MobileMe to ensure that it was public and did not require password protection either. But for some odd reason, even though I didn't change anything, my site's pages seem to require a user name and password to get into them. If one continues to click cancel, the page continues to load.
This does not happen every single time, but it happens more often than not. I have tried this with my iMac, Macbook, as well as my iPod Touch, and I get this on all machines. My brother has tried logging in from another location using his Macbook Pro, and he gets the password prompt as well.
I tried turning on password protection to the site and uploading the changes, then disabling password protection and reupping the changes once again. I've tried uploading entire site, instead of just changes, but the problem continues to persist. I definitely need this issue solved since this site is important to me.
The site url is: http://www.globalwinetour.com
Does anyone have any suggestions to rectify this, or does anyone have any idea what is causing it? Am I missing something here? Am I doing something wrong? Please help me out!
Many thanks in advance!

Problem with "Insufficient data for image" and embedded JPEG 2000 Images

I frequently download pdf from the http://www.glorecords.blm.gov web site. They are reporting a problem with Reader Reader 10.1.4 and the pdf files they have.
"("Insufficient data for image" and embedded JPEG 2000 Images)"
I am experiencing the same "Insufficient data for image" error when opening their downloaded pdf and viewing in ACROBAT X 10.1.4.
Can someone address this please?
Win 7 sp1

Read this:
http://blogs.adobe.com/dmcmahon/2012/08/21/acrobat-insufficient-data-for-an-image-error-af ter-updating-to-10-1-4-or-9-5-2/

Syncing controls for video and audio, with Closed Caption

Hello,
First, I have Closed Caption and audio within my slide (no audio in video, because I couldn't use Closed Caption then) but now the audio can be turned on/off from project control bar while video continues to play. I tried to add a control bar to the video (hoping I would have control over both playing and audio) but now audio is controled by project slide control bar and video is controled by video control bar.
Is there any way to sync the 2 control bars? Or at least give control to the audio on the video control bar instead of the project control bar?
Thanks,
ROV Tech

Your theory is proven false.
On the contrary, the variable framerate is the cause of sync issues and you just confirmed it.
Similarly, would you say that FCP is completely useless for all practical purposes, because it can't create Blu Ray disks?

Problems with sound only on video not audio files

Hello
My first post here. I am having some problems with sound on video files. It is almost no sound, and the sound that is there is only crackling noise. I have the Creative X-treme audio soundcard and have installed the Vista codec pack and the K-lite codec pack. I have also updated the soundcard driver. The thing is that these problems only occure on video files, not on audio files such as mp3's. Can anyone help me?

About alsa dmix, and for the record:
On an Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, the following are my finding about
quality/cpu when mixing two streams at 44khz:
a snippet from my .asoundrc
#converter "samplerate_best" # perfect: 16%cpu, maybe overkill
#converter "samplerate_medium" # almost perfect: 6%cpu
#converter "samplerate" # good: 4%cpu, definitely usable
#converter "samplerate_linear" # bad: 2%cpu, way better than default wine resampler
#converter "samplerate_order" # very bad: 2%cpu, like the default wine resampler
Here is the reference topic: https://bbs.archlinux.org/viewtopic.php?pid=942724
I may be wrong, but in an opensource world (code reusing), i really doubt pulseaudio could lead to better quality/cpuuse tradeoff.
Pulseaudio, being just another layer atop of alsa, could only lead to higher cpu usage.
Last edited by kokoko3k (2013-11-11 15:33:41)

Error message for video and audio ?

My text messaging is working but my audio and video is not. It was working a couple of weeks ago just fine. Any thoughts?

Hi
First have you set the Quicktime streaming setting, goto sys prefs/quicktime/streaming/streaming speed, set to 1.5mbps
In ichats prefs click on video and change bandwidth limit to 500.
Restart iChat.
Tony

Problem with Crystal reports for Eclipse and Postgres-databases

Hi,
Is there a known problem when using a PostgreSQL-database to create a report with Crystal reports Plugin? When I drag a table, then occurs a error-windows, that the object can't created.
I have found a workaround for solving the problem. After new installing Eclipse Platform Version: 3.4.1 Build id: M20080911-1700 and Crystal reports Plugin 11.8.6.v1371 with JRE 1.6.0_01 the error message allways occurs, when I select a table from a PostgreSQL database (Version 8.2). After restarting eclipse you see the last selected tables in the field explorer and you can drag the table fields in the report. A repeated choice of the same table causes aliases for the table in the field explorer after restarting eclipse.
Error.log:
eclipse.buildId=M20080911-1700
java.version=1.6.0_01
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=de_DE Command-line arguments: -os win32 -ws win32 -arch x86
Error
Tue Dec 16 14:03:53 CET 2008
Verursacht durch: java.lang.IllegalArgumentException
com.businessobjects.crystalreports.designer.core.ReportException: java.lang.IllegalArgumentException
at com.businessobjects.crystalreports.designer.core.ExceptionFactory.B(Unknown Source) at com.businessobjects.crystalreports.designer.core.ExceptionFactory.create(Unknown Source) at com.businessobjects.crystalreports.designer.core.elements.data.TableElement.add(Unknown Source) at com.businessobjects.crystalreports.designer.core.commands.AddCommand.doCommand(Unknown Source) at com.businessobjects.crystalreports.designer.core.commands.ReportCommand.C(Unknown Source) at com.businessobjects.crystalreports.designer.core.commands.ReportCommand.execute(Unknown Source) at com.businessobjects.crystalreports.designer.CoreCommand.execute(Unknown Source) at com.businessobjects.crystalreports.designer.dseintegration.DSEDropHandler.drop(Unknown Source) at org.eclipse.jface.util.DelegatingDropAdapter$3.run(DelegatingDropAdapter.java:211)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.runtime.Platform.run(Platform.java:880)
at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:48)
at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:175)
at org.eclipse.jface.util.DelegatingDropAdapter.drop(DelegatingDropAdapter.java:209)
at org.eclipse.swt.dnd.DNDListener.handleEvent(DNDListener.java:90)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1027)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1012)
at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:770)
at org.eclipse.swt.dnd.DropTarget.Drop(DropTarget.java:455)
at org.eclipse.swt.dnd.DropTarget$3.method6(DropTarget.java:257)
at org.eclipse.swt.internal.ole.win32.COMObject.callback6(COMObject.java:119)
at org.eclipse.swt.internal.ole.win32.COM.DoDragDrop(Native Method) at org.eclipse.swt.dnd.DragSource.drag(DragSource.java:362)
at org.eclipse.swt.dnd.DragSource.access$0(DragSource.java:288)
at org.eclipse.swt.dnd.DragSource$1.handleEvent(DragSource.java:171)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3823)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3422)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2382)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2346)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2198)
at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:493)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:288)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:488)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
Caused by: com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.IllegalArgumentException---- Error code:-2147467259 Error code name:failed at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source) at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source) at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ag.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.bu.if(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.bu.void(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.a6.for(Unknown Source) at com.crystaldecisions.proxy.remoteagent.u.performDo(Unknown Source)
Best Regards
Arnold

Your issue appears to be a Crystal Reports for Eclipse report designer thing, and not a JRC runtime thing. The JRC runtime does support Type 4 JDBC drivers, but all modern PostgreSQL drivers are Type 4.
The current report designer is more restrictive than the JRC runtime - and PostgreSQL, being not on the supported platforms list, has never been tested with the embedded designer.
Unless there's anybody out there with experience with PostgreSQL and CR4E designer, who would be willing to share their experiences.
Sincerely,
Ted Ueda

Problem with 2 codes for same project

i need help please, i have two C++ (colser to being C codes) on the same project,but VS does not allows them both to build solution,i asked my teacher and she told me that the VS running them together and told me to run the separately,someone
can please tell me how to do so? i need to do that until tomorrow`s night,please answer that ASAP. thanks for any help

i need help please, i have two C++ (colser to being C codes) on the same project,but VS does not allows them both to build solution,i asked my teacher and she told me that the VS running them together and told me to run the separately,someone
can please tell me how to do so? i need to do that until tomorrow`s night,please answer that ASAP. thanks for any help
A project can only have one main() function. If you have two, then name them (say) main1() and main2(). Then do something like
int main()
main1();
main2();
return 0;
Or you can run just one of them by commenting out the call to the other.
If something like this does not work for you, then you need to explain more about your code.
David Wilkinson | Visual C++ MVP

Having a few problems with the codes for this program.

i type in the code. in notepad, then compile it to java, but i always seem to get 3 errors. if anyone can help, id really appreciate it.
using java:
Calculate the salary at the end of two weeks. You know that:
? For the first 40 hours worked in a week the pay rate is $10/hour and after that
initial 40 hours the pay rate is $15/hour.
? If the total salary (week1+week2) is less than $500, the employee will receive 10%
bonus. If the salary is between $500 and $1000, the employee will receive 5%
bonus. If the salary is between $1000 and $2000, the employee will receive 1%
bonus.

Well, maybe if you showed your code and the complete and exact "messages", we could help you.

Problem with downloading updates for CS6 and Camera Raw 7.4

I am unable to update my CS6 to get the latest updates and latest Camera Raw for Canon 6D. I get an error message that says close Adobe Bridge. Photoshop is closed and as far as I can tell Adobe Bridge is closed. What do I do now?

In Windows, open the Task Manager and, in the Processes tab, close bridge.exe.
http://helpx.adobe.com/creative-suite/kb/error-installation-cannot-continue-bridge.html

Spreadsheet/Database for video and audio footage in archive mode

I'm looking for templates that can address my needs.
I have 2 years of footage related to a project and I'm looking to have it centralised and have metadata attached to it that will allow me to cross reference footage, for example, when someone in an interview talks about losing weight and to be able to pull up clips that relate to that.
I got a feeling that an Excel spreadsheet is the way...
Thank you and look forward to hearing back from you.

Check out the CatDV software for asset management - http://www.squarebox.com/legacy/catdv.html
Thanks
Jeff Pulera
Safe Harbor Computers

Update to kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now apparently included in Windows XP after Service Pack 2 and above.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
4:24 PM Sunday; December 7, 2008

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:19 PM Friday; December 12, 2008

Ichat problems with -8 code for video and audio

Similar Messages

Maybe you are looking for