IChat stopped working last night on iPads and Mac

Last night, while using iChat (beta) on my MBP to a friend's iPad, it studdenly stopped sending.  She called me to tell me that she suddenly couldn't send from her iPad, so I tried from mine.  She can't use iChat on her iPad, I can't on mine, I can't send to iPads or iPhones through iChat on my MBP, but I can use it and chat fine to a PC with a google account.  It stopped working, then briefly, it worked, then it stopped again, and hasn't worked for any of us since.  iPhone to iPhone works fine.  I've gone all through the forums here and haven't seen any buzz about something being down.   Any clues?

HI,
iPhoto  - Photo Stream.
I had a dial up email account that has been my Apple ID for a long time.
Last year I used this to create an iCloud ID for my iPhone as it went to iOS 5
This gives me two "names" to access the account if I use iTunes or the App Store.
They work as individual Names for iMessages and FaceTime.
I am the person in our house that inherits the old  phones at update time
I gained a second iPhone 3GS and I did have the two names split between the two phones.
With iOS 6 I did get the offer to include the Apple ID (iCloud version) to be added to Messages on the Mac (along with the second iPhone Number) I thought I had declined but it does actually appear in the Messages Accounts for the iMessages account although Unticked.
This led me to check which iPhone was using which part of the Apple ID's "Names" and I found one phone was not syncing iPhoto's Photo Stream.
I had thought it was because I had messed up the name somewhere.
I have checked whilst writing this and have had to time Machine some folders back that went missing in iPhoto (only my Daughter's wedding !!!).
Seems it is something I did on my Mac ??
I thought I was on to something that was going to be more helpful.
8:31 PM      Wednesday; October 10, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
  iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Similar Messages

  • Face book has stopped working on my I pad.  I got to it through Safari as i do on my mac. It works on my mac but stopped working last night on my i-pad

    face book has stopped working on my I pad.  I got to it through Safari as i do on my mac. It works on my mac but stopped working last night on my i-pad

    Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data (Clear Cache on iOS 4) and also Clear History
    If you stillc an't access Facebook via Safari then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    There are a number of Facebook apps (including an 'official' one), which might be better than accessing it via Safari

  • BT Infinity - stopped working last night

    My BT Infinity connection stopped working last night and BT Home hub is showing green , sometimes flashing green or solid green. Recently I have a a cross line on the phone line intermittently and several small outages of Infinity connection too. Can you help please?
    Has the BT Home Hub 4 packed up? Will BT replace this or am I responsible for its cost & replacement?  Openreach are coming in a few days.
    Can anyone help please.

    I suggest you try a factory reset of the hub
    http://bt.custhelp.com/app/answers/detail/a_id/113​86/~/how-do-i-reset-my-bt-home-hub-to-its-factory-​...
    If you found this post helpful, please click on the star on the left
    If not, I'll try again

  • My home sharing stopped working on my iphone, ipad and apple tv

    Hi, my remote app to use home sharing stopped working on my iphone, ipad, and apple tv, have tried turning the windows firewall off but still does not work?

    make sure the computer firewall or router does not block the shared lib feature

  • CS6 just stopped working last night.

    PS CS6 Extended  just stopped working over night and so has my version of CS5.1. I have a trial of CS6 Master Suite going and they are all dead too, and no the trial isn't over.I don't even get a flash screen.  Actually I got bridge to open and it asked me to install ACR6.7??? I have  LR 3&4, Element/Premiere 10 and they are fine. I have wiped my MAC twice with the CS cleaner and have spent the entire day on chat help and the phone. Nothing is working, any ideas?
    Oh and NONE of them will recognise my camera, it's just plain bizarre
    Message was edited by: weatherfreak
    Oh I have a MacbookPro Early 2011, 8GB Ram 1333Mhz DDR3 , i7 intel core 2.3Ghz, 750MB HD and 4TB external HD. I had noticed how slow it's been running lately too

    I suggest you try a factory reset of the hub
    http://bt.custhelp.com/app/answers/detail/a_id/113​86/~/how-do-i-reset-my-bt-home-hub-to-its-factory-​...
    If you found this post helpful, please click on the star on the left
    If not, I'll try again

  • Face time has stopped working since update on iPad and iPhone

    My face time has stopped working since both my iPad 2 and iPhone 4S did their iOS 6.1 update. They just say that a connection cannot be made, or FaceTime unavailable. Both devices are sitting beside each other, both have excellent wifi. If you try to FaceTime one of the devices, it will ring once and then lose the connection. Apple account details are all fine, FaceTime is switched on, on both. Kind of lost and frustrated now

    Hey guys,
    So I also noticed a few weeks ago facetime stopped working on my iphone but was still working on my ipad2 and macbook pro.
    Phone - iphone 4
    os version - 6.1.3
    carrier - at&t 14.2
    location - usa
    I use the same apple id for all devices
    I searched online for a fix and/or troubleshooting help. I tried alot of the suggestions on this discussion as well as others but nothing seemed to work. Out of frustration, I finally reached out to apple tech support. I went through the entire trouble shooting steps with an apple technician and was even transferred to a senior advisor for additional help. We tried everything from resetting passwords, resetting icloud accounts, resetting phone settings, checking network settings, resetting date & time, resetting location, making sure push and multitasking functionalities were working properly, etc. We spent a couple hours troubleshooting trying everything but nothing worked. The apple tech said I would have to restore the os and if that didn't work, the only other thing to do would be to send in my phone. But he did stress that I had to restore as a NEW device.
    I backed up my phone using iclould and my computer (everything is synced) and restored as a new device. I tested facetime and it worked, however my phone was back to factory position which is not ideal. So I went to itunes and restored my most resent backup. I got all my phone contents back but FaceTime no longer worked. I called the apple senior advisor back and he said I would not be able to restore from a backup because there seemed to be an issue with it that prevented FaceTime from working properly. So I backed up what I could to itunes and iCloud then restored my phone as new. After the restore, it prompted me to install the carrier software update which I did. Then I used itunes to sync my music, apps, contacts, mail, videos, pics, etc. I did this yesterday and facetime has been working properly since then. However certain things I was not able to recover.
    So far, these are the things I noticed have been lost with the restore:
    - all my settings (everything went back to default/factory)
    - voicemail messages greater than 30 days old
    - all text and iMessages (but I still have copies of imessage conversations on my iPad and mac)
    - data stored within apps (you start fresh like when you first downloaded the app. some apps i have online accounts that sync but most apps the data is lost)
    - screen display configurations
    - notes that were only on phone and not synced with an email account
    Out of all my research, this has been the only thing to get facetime working again. But on the downside, it does take a lot of time to backup, restore, re-sync, and then set up my phone similarly to how I previously had things. The big thing for me was the loss of my apps data. I wish there was a way to restore that. But when all is said and done, I'm glad to have FaceTime back on my phone.
    If you are not quite ready to restore, check out this discussion for other suggestions you can try first:
    https://discussions.apple.com/thread/5163024?start=0&tstart=0
    I hope you guys find this useful.

  • My computer pretty much stopped working last night...

    Hi! So, last night first my safari stopped working. But iChat was still working. Then I decided to restart my computer. After that nothing would work, and my computer froze when trying to load something.
    I finally got it to turn off, and I tried to turn it back on. It makes the noise and I see the light gray screen with the apple and it goes to the blue screen and says "Mac Os X" where normally it would load. It doesn't load anymore.
    The only connections to this happening that I can think of is I was doing a few updates the other day and one didn't finish properly, and I remember my widgits not working anymore. I'm not very mac savy (obviously) so I didn't know what to do about it. I should have known there was a problem then.
    I really hope I just didn't lose everything that I have done in the last year!!!

    Welcome to Apple discussions, danegolf11.
    Many of the symptoms you described sound like the ones associated with a failing hard drive. If it is only a software problem then you should not be hearing any unusual noises. Can you clarify what kind of noise you have heard - or are you referring to normal the 'startup chime'?
    However, before concluding that it may be a hard drive failure, would I be right in assuming that you do not have a backup of your data? If that is the case then the first thing I would try to do is safeguard any valuable data by attempting a backup using FireWire Target Disk Mode - but you will need access to another FW-equipped Mac.
    Once you have, hopefully, backed up your data try restarting the PowerBook with the original installer disc (insert disc, restart and then keep the 'C' pressed) and run Disk Utility to check for any problems.
    2.0GHz MacBook, 15" 1.25GHz/12" 1GHz PBs, 2xPPC Mac minis, 12" iBook G4,   Mac OS X (10.4.8)   Cube, 2xTAMs, iPod 4G & nano 2G, 1G & 2G iPs, AEBS, AX

  • IPhone 5 wifi stopped working last night

    It's worked fine over the last couple of months but last night I went to download a song and couldn't get onto my wifi. I've tried to connect to multiple different networks, some with security and some without but it hasn't worked for any of them. I've turned the phone on and off, restored it to factory setting etc but nothing has worked. Occasionally when I try to connect it gives me a message about the wifi "not giving an internet connection." Is this a hardware issue and should I take it in to an apple store? (Software is all up to date also).

    Once you have followed all troubleshooting steps such as backing up and restoring as new http://support.apple.com/kb/HT4137 then it looks like there is a hardware issue with the Wifi antenna and the device needs to be serviced. If you are in your one year limited hardware warranty then the service will not cost you anything so long as you do not have any hardware/liquid damage to the phone. If you are out of warranty please expect to pay $199 out of warranty fee to get the device repaired/replaced.
    Best regards!
    NOTE: If you do a mail in service for the phone depending on what you set up then there might be a hold on a Credit Card to send a replacement iPhone to you.

  • Network magic connection stopped working last night

    Really need help with this.
    My network magic suddenly yesterday stopped working in that it cannot contact the network magic website. This leads it to conclude that the internet is down, even though the connection is fine.  This happened on all three of my computers. My browsers (mozilla and explorer) cannot seem to connect to the network magic website either. A product re-install on one of the computers went fine, but the problem still persists, despite a re-boot. Examined the hosts file manually and there are no entries that might cause a problem. The computers use different service provides and a different router. All three are vista ultimate 64 bit with service pack 2 (recently installed), have spyware doctor, spybot, and live care for security tools (as well as network magic).  The live care firewall has the correct permissions for network magic. The network magic platform service is running properly.
    Of course I cannot contact the network magic support team as I cannot access the website - this does not appear to be a known problem (did a search).
    Peter

    Peter,
    Not only the Network Magic connection stopped, but if you try to connect with your Net2Go remote access website it's not there anymore.  Not even if you try to connect with your computer that's hosting it.
    As I understand it, when Cisco aquired Pure Networks they issued their last upgrade, and with it came the announcement that the latest version would no longer have the Net2Go feature.  Indeed, they could choose to END Net2Go at their discretion.  It would seem that this is the case.  A shame, really.  My clients have come to depend on being able to retrieve their material and email links to their clients as well.  All Cisco had to do was provide a redirect, how much server power can that take up anyway?  It was almost like having a web site, and it cost nothing.  Sure was nice.
    According to the End-Of-Life protocols as laid out by Cisco, they're supposed to give warning when there's a system they would no longer support, and they are supposed to get with you to help you ease into the replacement technology and give you several months to do so.  Slamming the door wasn't supposed to be part of it.
    So now we have to either go without because nobody offers anything remotely like it (I checked), or we can all get domain names and pay for web sites and hosting.  Thanks a lot, Cisco.

  • WRT54G V3 WiFi stopped working last night

    I've done a firmware upgrade to latest version v4.21.5 yet my Wifi still isn't broadcasting for my devices to find and connect as of last night (Aug 5, 2012).  This hasn't happened before, so I was hoping it would return but still hasn't started working yet.
    My iphone just says "unable to connect."  Has my router finally called it quits?  It is from 2001 
    Wireless security is WPA2 Personal, TKIP + AES; Mixed mode, Channel 6, SES Inactive, SSID Broadcast Enabled.  If those settings help?
    Solved!
    Go to Solution.

    Try these trouble shooting steps:
    1. Press and hold the reset button on the back of linksys for 30 full seconds. Wait 5 minutes. Unplug the linksys from the electrical outlet for 30 seconds. Plug back in. Reconnect you router to modem and reconfigure except this time, do not enable any security.
    2. Try to connect with your iPhone. If it connects, enable you security.
    If that doesn't work, then reset the network settings on your iPhone if that is the only device giving you problems. And try again.
    If you have ever loaded third party firmware on you linksys such as ddwrt or tomato, you'll need to do a 30/30/30 reset on the linksys. You can search this board for procedure by typing 30/30/30.
    But yeah, it could be shot.

  • My home sharing stopped working last night after finishing a movie.

    I had just finished watching a movie and had planned to watch a second one when my power began flickering. My apple TV then couldn't connect to the iTunes store so I restarted my apple TV and the only things that came us were computer and settings. I thought to myself that my cable/internet must be out. But that's OK because I've downloaded all my purchases from iTunes onto my computer and I'd simply stream the content from my computer. It didn't work. I was unable to watch any content through my apple TV. Yet, I could watch content on my iPod and my computer, but I didn't want to sit in my cramped study. Is there a setting I need to change so that apple TV can stream from my computer?

    Addendum: I've tried restarting my PC, my iPhone. I've tried switching Home Sharing on and off.
    In the playlists, songs, artists, etc. it simply says "No Music".

  • I am not able to view videos on youtube, it stopped working last night after a brief power outage. What do I need to do to restore the ability to view youtube videos?

    The power went out for a few seconds, when I went to watch videos on youtube, I was not able to. What do I need to do to restore this option. It seems to affect only youtube videos.

    Duplicated: https://support.mozilla.com/en-US/questions/846960

  • Changed password to my email last night on laptop and now it won't let me retrieve my mail on iPad ,tried deleting my account with yahoo and adding back didn't work

    Help changed my email password last night on laptop and now it won't let me get mail on iPad. .tried deleting email and adding back account with new password and didn't work,tried to go in settings and add server didn't work ,help

    Hello Hawaii227,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Log in to your email provider's website to ensure that the account is active and the password is correct.
    Restart your iOS device.
    Have a nice day,
    Mario

  • HT201263 Unable to update, restore or recover. Slider doesn't slide and number pad doesn't work for passcode. What next? Worked last night . Battery charged. When I push Home button I get my backgroung but can't slide slider. Device is recognized by iTune

    Unable to update, restore or recover. Slider doesn't slide and number pad doesn't work for passcode. What next? Worked last night . Battery charged. When I push Home button I get my backgroung but can't slide slider. Device is recognized by iTunes.Help! Thank you.

    Besweet, I'm having the very same problem with 60GB colour which was bought new and worked for 6 months before suddenly just not being recognised by PC. I hadn't changed anything at all.
    I've followed all troubleshooting advice and reinstalled and updated iTunes and iPod updater software but all troubleshooting routes seem to hit the dead end of either the need to access the iPod via the PC (which isn't possible as it's not showing up at all) or the iPod in disc mode stuck at "ok to disconnect".
    It's still under 1yr warranty so will have to take to a dealer.
    I'm sorry that's not much help for you but at least you know it's not a unique problem.
    PC   Windows XP  

  • My iPod touch 5th generation isn't working. I plugged it in last night to charge and now its not turning on or responding to anything.

    My iPod touch 5th generation isn't working. I plugged it in last night to charge and now its not turning on or responding to anything.  It used to do this thing where it would freeze when it was 100% charged and plugged in and I was using it.  I'd just unplug it, restart it (home button and top button) and then it would be fine.  That had happened like 5 hours prior to me plugging it in again and then it going totally blank.

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

Maybe you are looking for

  • How do I add a "today" category to my Finder sidebar?

    How do I add a "today" category to my Finder sidebar?  My old Mac Mini had one.

  • Trouble with Select tool in Acrobat 9

    When I try to make a selection in a .pdf, the selection box is randomly sized and placed.  For example, I select an area in the middle of the page, but when I let go of the mouse the selection box reduces in size and moves up/down the page.  I am sel

  • Update/modify an internal table

    hello i m writing a program in which i m adding a new field to a table type, after adding i want to select those SO no which has the date='06/08/2009', but in the o/p screen i m seeing that the beside the SO no those two date values in the date field

  • Modulepool

    hi, iam developing a program in which iam using a z-table. iam using the bapi for production order cancel and create goods movement.... after running those bapis i have to update few fields in z-table ie...cancel conf counter, mat doc number  to the

  • Showing ' No Records available' message in a h:dataTable

    Hi , I am using JSF dataTable to show my data in tabular format. The data is comming from a database. And everything is working finely. But I would like to show a message like " No Records Available" in the dataTable if there has no data to be shown.