IChat Theater - Audio not working - (Final Cut Pro 7)

Hello Forum
I just installed FCP 7 and am trying to get IChat Theater to work. The video comes through fine, but I don't hear the audio of FCP. Any ideas why? The audio of the mic comes through, we can have a normal chat conversation but the audio of the playback is just dead.
My setup (I am the editor):
FCP 7
OSX 10.5.6
Mac Pro (early 2009) without Video Camera, only mic
My client's setup:
OSX 10.5.6
Macbook Pro with camera and mic
Do I need to have a camera installed on my mac pro?
Any insight appreciated.
Thank you
sk

Hi Meatpuppet,
I'm having the same issue with not getting my audio through to the client on Ichat theater preveiew. I'm on a mac pro with a small DV camera attached via firewire. when I start the chat, the person on the other side sees and hears me fine, but then when I start sharing in FCP, the video switches so that the remote person sees the time line, but loses the audio from me and doesn't hear the audio from the time line...
The manual recommends "disconnecting and external video device" ( then what do us mac pro folks do?)
So my question for you, and I know that you're on and Apogee Duet, is: Was your tinkering in FCP, your system sound settings, or iChat? in other words, where was the disconnect?
thanks.

Similar Messages

How to setup an artist mix (audio mixer) on final cut pro 7?

how to setup an artist mix (audio mixer) on final cut pro 7?

Hi Meatpuppet,
I'm having the same issue with not getting my audio through to the client on Ichat theater preveiew. I'm on a mac pro with a small DV camera attached via firewire. when I start the chat, the person on the other side sees and hears me fine, but then when I start sharing in FCP, the video switches so that the remote person sees the time line, but loses the audio from me and doesn't hear the audio from the time line...
The manual recommends "disconnecting and external video device" ( then what do us mac pro folks do?)
So my question for you, and I know that you're on and Apogee Duet, is: Was your tinkering in FCP, your system sound settings, or iChat? in other words, where was the disconnect?
thanks.

Using Tascam US-122mk11 as audio interface in Final Cut Pro 7

Using Tascam US-122mk11 as audio interface in Final Cut Pro 7. Works fine with Garage Band. Final Cut Pro won't use it. It appears in source menu in Voice Over Tools, but FCP won't use it.

This is the Final Cut Pro X forum. You are using a very different application. The Final Cut Studio forum, which is for the application you're using, is here:
https://discussions.apple.com/community/professional_applications/final_cut_stud io
Give exact details of your media and sequence settings. It would also be good to know what kind of drive you're using and how it's connected.

IPhone 3Gs audio drift in Final cut Pro (but not qt player or imovie)

Is anyone else having audio drift issues with video from the 3gs when imported into FCP? We find that a 30 minute clip plays just fine in Quicktime player with perfectly synced audio, but when brought into final cut pro the clip has several seconds of drift over thirty minutes. This is before it's ever placed into a timeline, and the issue persists even if we transcode to prores 4:4:4 or any other codec. Issue duplicated in FCP 6 and 7.
Also, the movies are often brought in upside-down, even though they are displayed perfectly by quicktime player.
If, however, I bring the same clip into imovie and export it, the resulting clip has perfectly synced audio which works fine in FCP.
Essentially, apple's free tools seem to have no problem with iphone-captured video, but Final Cut, which is the pro tool, seems to have issues. Unless I'm missing some obvious (or abstruse) configuration step which is causing the problem.
Any insight greatly appreciated; everyone in our shop is stumped.

Shane,
Thanks for your response, though I don't really see the need for the condescending tone while offering no useful information. I'm aware that H.264 is not an editing format -- If you had taken the time to read my post more carefully, you would note that I have already transcoded the footage ("and the issue persists even if we transcode to prores 4:4:4 or any other codec. Issue duplicated in FCP 6 and 7"), so your suggestion "Use Compressor to convert it to DV." really doesn't help much. We've done so and the problem persists. Hence the post.
Incidentally, I have transcoded with quicktime player, compressor, and FCP. All preserve the audio drift. Interestingly, Imovie deals with it well, kicking out a file with perfect sync. My instinct is that it's a metadata issue (i.e. FCP is misinterpreting the actual framerate of the video) but I'm looking for any similar experiences out there.
As for "professional" vs. non pro hardware and software, I certainly don't expect the iphone to shoot footage or offer features that are comparable to those of a pro camera. I do expect it to properly encode quicktime files for use with any bug-free quicktime-based tool, of which FCP is the flagship example. Should aperture not be required to handle photos from point and click digitals because they are not "professional?"
It's a somewhat ridiculous position to take that Apple's video tool would not support their only video-capable device. There are many consumer devices supported by FCP (you've heard of DV, yes?) and the 3Gs (and, I would assume, the coming video-capable ipod touch) are no exception.
In short, this is clearly a bug, and I'm trying to run it to the ground in order to use the 3Gs within a production environment for a project requiring many mobile devices uploading video from wifi connections around the world. If you have any useful information to offer, I'm all ears.

The sample audio files in Final Cut Pro X will not play

How can I hear the sample audio in Final Cut Pro X without dragging the clips onto the timeline. They used to play, but stopped after the computers were connected to Tenaka.

The only way to test it is to go to Network system prefrences and switch off all connections to networking. There are no plugins for FCP that are used for network connections.

Macbook pro does not support Final Cut Pro preview on external monitor?

I have been editing on Final Cut Pro from my imac for approx 1 year with an external monitor attached with no problems. I recently bought a macbook pro, for Final Cut Pro editing, and discovered that the monitor does not work. The Final Cut Pro preview on the external monitor freezes and in the preview pane of FCP it flick between two images.
I have been reading around some forums, and have seen a couple of people with the same problem.
Anyone have a suggestion on how to run the external monitor with FCP?
Thanks!

You have probably already done it but ensure you have updated the OS and Quicktime prior to attempting to instal Final Cut Studio.
I recently had a hard drive crash and after installing the new hard drive it would not read the OS installation disc. I ended up using an external drive case and installed the OS on the drive from a different Mac Book, then reinstalled the hard drive in the other Mac Book. Then it booted right up. I updated all the original software before attempting to install any additional software.
Everyone kept saying it wouldn't install due a possibly defective optical drive and I can't say why but it wasn't the drive. As soon as I had the system up and running again the optical drive functioned flawlessly.
I hope this helps you.

Apple Audio Filters in Final Cut Pro

I'm posting this question here because I didn't receive any responses in the Final Cut Pro message area, and I thought given the nature of the questions, audiofiles that read this area might have an answer.
In Final Cut Pro there are two folders of audio filters, one called APPLE and the other FINAL CUT PRO.
I fully realize none of these filters have the power of programs like SOUNDTRACK PRO.
However, I'm in a situation where I need to document what the filters do. I've already found all the material I need for the FINAL CUT PRO filters. However, I can't find any information anywhere on the APPLE category of filters.
My questions:
#1 - Does anybody know why the APPLE audio filters are seperated out from the Final Cut Pro filters? How are they different generally?
#2 - Does anybody know where I can find documentation on what each of the APPLE category of audio filters do? I can't find it in the Final Cut Pro Manuals or Diane Weyland books. I found some Ken Stone tutorials on line, but they don't address the APPLE filters.
#3 - And many of the APPLE audio filters seem to be near duplicates in the Final Cut Pro audio filters, so what's the point in having two versions?
Any info at all or a direction to look would be appreciated.
Thanks so much.
Message was edited by: brvideo

As of Leopard I was surprised to find that the Apple system plug-ins, and those that are supplied with the FCP suite are not AU plug-ins in the old sense of what a plug-in used to be. They no longer exist as a file anywhere in the system as they used to. Audio Unit plug ins formerly used to exist in Library/Audio/Plug ins/Components - now they are build into the Leopard operating system.
Any third party plug-in you purchase will still be installed in the "old" way.
Sorry, I can't remember where that documentation exists. Probably in the developer docs somewhere.

Can not get Final Cut pro to capture HD footage from Canon HV10

Ive had soo much trouble with no success, in trying to get footage from my HD camera into Fina cut Pro HD 4.5. I can get normal dv footage when i cahnge the setting s on the camera, and Final cut pro, but HD is not been possible so far.If any one can inform me of anything, is it possible at all to capture from my camera in HD, do i need Final Cut Pro 5? Do i need pluggins? Anything!! I want to capture HD quality!
Powerbook G4 Mac OS X (10.4.9) 1.5GB MEMORY

You need to list the camera you are using, the settings you shot on and the settings on your sequence (easy set up etc)

Is out of sync audio because of Final Cut Pro X or DVD-R 8x?

Hi, I tried burning a 2 hour DVD straight from Final Cut Pro X (with it's featured menu). I used an Imation DVD-R 8x, and the burn went through successfully. However, the footage turned out pixelated and I noticed about halfway through that the audio was getting out of sync. I went back to check my sequence in FCPX to make sure I hadn't made a mistake and everything is alright. Was this an issue with the DVD I was using, or with FCPX's DVD exporting?

In FCPX, Share>DVD>Settings>Output Device>Hard Drive. That will make a disk image.
If you have iDVD, great choice. Just Share>Master File, and brong that into iDVD. The iDVD app will do the encoding and give you a disk image option as well.
Russ

Audio problem with Final Cut Pro x. (New to x)

Hello,
I recently switched over to Final Cut Pro x and am just now starting to get adjusted. I just ran into this problem and I'm having trouble solving on my own. Here you go...
I just imported a bunch of video into my "event" and went through and logged everything. Everything sounds fine until I drag my clips onto the timeline. Once I drag them down the audio gets lower and sounds very muffled. Does anyone know what would be the cause of this?
Thanks!
Clayton

What are the exact specs of the original media? Open in the QT player and report what it says in the movie inspector.

I can not update final cut pro on one of two computers

I updated Final Cut Pro X on lap top but can not update on IMac. Purchased through app store.

You can just copy the app across with a USB thumbdrive.

Using Waves audio plugins in Final Cut Pro

Does anyon know how to use presets for Waves plugins in Final Cut Pro. The plugins show up, but don't have the graphical interface or the ability to apply presets (to my knowledge) maybe there is a workaround?
otherwise can anyone reccomend a good workflow possibly with soundtrack?
Thanks.
BZ.

Real? You mean as in Real Player? Those don't work in FCP...they aren't an editable format.
Mac the Ripper? This converts DVDs to Real movies?
Google MPEG STREAMCLIP. It decodes MPEG-2 files into DV and a more workable format.
And also look into DVDxDV. It can convert NON-COPYPROTECTED footage to an editable one.
Shane

Built in Audio not working in MacBook Pro after update to 10.7.3

The Built In Audio is not working in My MacBook Pro (Early 2011) after update to 10.7.3; I tried resetting the PRAM and SMC but it didn't helped me out. I can get audio only if i reboot my mac from Safe Mode or reboot after Repairing Disk Permissions in disk utility using the Recovery Partition;. If i make a normal restart or just startup then the built in audio disappers (audio is displayed gray in the menu bar) . Everything was working well with the 10.7.2
- Audio Works well with the Boot Camp Partition. and There is a sound during boot up.

I dont have any backups and i dont have time capsule or an external hard drive ready to be used for backup.
My macbook is my the only one computer. The problem is that the animation is lagging when i change the window to dashboard or safari or mail or another window. Inspite of this my macbook works well.
But 5 minutes ago, I noticed that if i run autocad on my mac- the lags go away!!!!

Digidesign Core Audio not working in Logic pro 7.1

Help! I'm not able to use Digidesign's (002 interface) as a core-audio interface for Logic Pro 7. Pro-Tools works fine with the 002. Logic works fine with built-in interface. However whenever I go to change from the built-in audio interface to the core audio 002 interface in audio drivers (in preferences), it won't allow me and I get the following message:
"Audio device has been removed" (press OK) then
"Previously selected audio interface is not available" (Press OK) (digidesign 002 interface has double brackets around the name in the audio drivers). If you try to relaunch driver again it disappears from the drivers list? In addition the "Digi design core-audio " application that opens up on the dock - just says "not connected" and some buttons are greyed out and you cannot "reconnect"?
Is there a conflict of drivers with the OS/Logic version and digi core-audio? I'm running Pro-Tools ver6.4, with digi core-audio 6.9 (updated from 6.4 - didn't solve the issue?), Logic Pro 7.1 and OS 10.3.9 (on a G4 1.25Ghz, 512Ram)?
It seems like a core-audio driver problem - but having updated to the latest version I'm still not getting any joy? Any offers?! Cheers.

Check the FW cable.
Anyway about compatibility Digidesign says this:
Mac OS X 10.3.9 Not Supported
With ALL versions of Pro Tools 6.x for Panther (other than Pro Tools LE 6.8.1 with Mbox 2 hardware only), the highest version of Mac OS X 10.3 that you should use is Mac OS X 10.3.8. There are incompatibilities with Pro Tools 6 and QuickTime 7, which is installed by Mac OS X 10.3.9. If you must use Mac OS X 10.3.9 for some reason, you should revert to QuickTime 6.5.2, available from the Apple website.
cheers
rob

Compressor (Audio Filter) at Final Cut Pro.

At Logic I used to use the filter Compressor to limit audio tracks(like soundtracks) while I needed
emphasize another audio (interviews,for instance). I saw at Final Cut audio filters a filter
called "Compressor / Limiter". I am not environmentalized with this filter at Final Cut.
What I want is limit the audio from a3/a4 while the interview plays in another track.
In what track do I need to apply it?
thx

Just dropping it onto the audio track won't do anything -you have to actively make some kind of adjustments by changing the values under the filters tab.

IChat Theater - Audio not working - (Final Cut Pro 7)

Similar Messages

Maybe you are looking for