IChat (version 3.1) continue to log off AIM - typical fix not working!

I've noticed that others have this problem as well, and the common suggestion for fixing the issue is the following:
First off, try changing the log-in port:
1 Log out of AIM (in iChat menu), then
2 iChat > preferences > accounts > server settings
3 Change 5190 to 443
4 Log back into AIM
This isn't fixing the problem... Any other ideas?
Thanks!

Usually happens when I'm not using the app (minimized or simly not chatting).
Currently using a Motorola modem and a Linksys wireless router (leftover from PC days). Never had this kind of problem with AIM on my PC, so it's kind of weird.
In fact, even though I was online with iChat earlier, my wife (on her PC) said that it showed I hadn't been online for a couple of hours or so...
Any ideas?
Thanks!

Similar Messages

  • My iphone in the evening yesterday vibrated continuously and went off am charging is not charging the phone is not switching on again. Please help me

    My iphone in the evening yesterday vibrated continuously and went off am charging is not charging the phone is not switching on again. Please help me

    well in thatcase, i need another help .
    thanks for your instant reply.
    i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
    because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone.

  • Field list on/off drag and drop not working in smartforms

    Hello Friends,
    field list on/off drag and drop not working in smartforms.
    is there any settings or some components needs to be activated ??
    i can drag the fields from the list but when i drop in the text node its not dropping tht field.
    Regards,
    Sunny

    Hi Friends,
    Even I am facing the same problems. What is the solutions for this ?
    And may I know what software version (sap gui) are you using.

  • 1. TACAS+ Accounting and Logged in Users report is not working on ACS 4.1(1

    Hi,
    I am facing problem with ACS 4.1 accounting, TACAS+ Accounting and Logged in Users report are not working, the csv file is been generated but nothing is showened in the file.
    I have checked the documents related to ACS 4.1, it says that there is a bug related to command accounting “CSCsg97429 - TACACS+ Command Accounting does not work in ACS 4.1(1) Build 23”.
    Tried upgrading the same with the patch applAcs-4.1.1.23.3.zip, still it is not working.
    Other reports are working fine.
    1. TACAS+ Accounting - not working
    2. Logged in Users - not working
    3. TACAS+ Administration - working
    4. Passed Authentication - working
    5. Failed Attempts - working
    Any suggestions or any idea, please revert.
    Regards
    Vineet

    Hi,
    Thanks
    Yes I have configured the command “aaa accounting exec default start-stop group tacacs+”
    As I have mentioned all the other reports are working. Which user and when he has logged in and what commands he has used. Only the TACAS+ Accounting and logned user is not working.
    Regards,
    Vineet

  • TS2771 what to do my ipod touch 4g is updated to ios6 now it has a white scren and wont turn off and to top it off the homebutton does not work at all

    what to do my ipod touch 4g is updated to ios6 now it has a white scren and wont turn off and to top it off the homebutton does not work at all please help me

    Try:
    - iOS: Not responding or does not turn on
    -When it says place the iPod in recovery mode use this program instead of the buttons.
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • HT5622 valid apple id but not icloud account.  I tried downloading on a different computer and logging in and it did not work.  I have restarted my computer several times.  I have changed my password several times.  I have tried to access the icloud page.

    repeating error message reads: "valid apple id but not icloud account." when trying to start my icloud account.  I tried downloading on a different computer and logging in and it did not work.  I have restarted my computer several times.  I have changed my password several times.  I have tried to access the icloud page.  Nothing has worked.  Now I have this stupid app and some of my music is still not being shared on both of my computers.

    I have the same problem signing in...but, I finally got a screen saying you have to set up a account on a device..like an ipad to get a iCloud sign in ...my apple id is [email protected]   and this screen reset to [email protected]
    If you don't have an apple device you may be out of luck.  I don't know.  I'm still waiting for help just as you are...good luck to both of us though.

  • My iphone has turned off and is now not working. I plugged it into my computer and it said it was in recovery mode and i had to restore it to fix it. Is there any way i can fix this problem without loosing all my files and photos through restoring it?

    My iphone has turned off and is now not working. I plugged it into my computer and it said it was in recovery mode and i had to restore it to fix it. Is there any way i can fix this problem without loosing all my files and photos through restoring it?

    There's only one thing you can do: make an appointment with Apple genius at the Apple retail store for a out of warranty replacement.

  • TS3988 Each time I log into iCloud, I check, Keep me logged in, but this does not work.  I have to reenter user name etc each time I try to go back to my iCloud account.

    Each time I log into iCloud, I check, Keep me logged in, but this does not work.  I have to reenter user name and password etc each time I try to go back to my iCloud account.

    Hi,
    In Keychain Access app in the Menu for the App is Keychain First Aid.
    If you open this is the tick box for Synchronising the Login password with the so called Login Keychain ticked ?
    9:49 pm      Monday; March 16, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • HT1430 When charging my Ipad mini, it turned off and its still not working, what do i do pls??

    When charging my Ipad mini, it turned off and its still not working, what do i do pls??

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • My iPod's OFF/On switch is not working and I have checked over internet that this problem is very common with iPod Nano 6th generation, my iPod is now out of warranty period. What shall i do now?? Please Suggest!!

    My iPod's OFF/ON switch is not working and I have checked over internet that this problem is very common with iPod Nano 6th generation, my iPod is now out of warranty period. What shall i do now?? Please Suggest!!

    You can do an out-of-warranty replacement at an Apple Store for a fee, get a 3rd party site to repair it, sell it for parts, or get a new one.

  • T42p vista fn + f3 and fn + f4 functions (turn off screen and sleep) not working correctly

    Hi -- I recently installed windows vista on my T42p.  It works fine except that the fn+f3 and fn+f4 functions do not work as expected.  Before installing the hotkeys driver, the fn+f4 function worked correctly while f3 did not (going to sleep worked, turning the monitor off did not).  I then installed the recommended hotkeys driver.  Now fn+f4 makes the monitor turn off while f3 does nothing ... fn+f4 is supposed to put the laptop to sleep.  On top of this, if i select "sleep" from the start menu, the computer turns the monitor off instead of going to sleep.
    Presumably, the sleep button could still be telling the computer to go to sleep, but the actual operation of going to sleep is now broken?  Just a guess.  Anyways -- anyone know how to resolve this so that fn+f3 turns my monitor off and fn+f4 puts my computer to sleep?

    I've too this problem, but more, my sound mute wasn't worked (for deblock, but it can block it few second before...) 5 days in 5-6 instalation of three version of winxp: winxp ru x64 sp2, winxp es/ru sp3 x32.
    eventually I've found and ran "TPOSDSVC.exe" in instalation directory and it give an opportunity  deblocking the sound volume!!!!!!!!!!!! and I don't need more functions 
    volume levels and brightness adjustment worked well without OSD (before I ran TPOSDSVC.exe) and with OSD.
    and now I don't know worked this bustered sound driver in winxp x64.
    ThinkPad T61 7664

  • My iPhone safair says it cannot open because it is not connected to the internet.  What do I do? I do not believe I changed any settings.  I have turned the phone off but this did not work.

    Safari cannot open because the iPhone is not connected to internet.  I do not believe I have changed any settings.  I have turned off the phone and then on, but this did not work.  Help?

    For Safari to work, you need either Wi-Fi or cellular data.
    Are you connected to a Wi-Fi hotspot?
    If not is Settings > Mobile/Cellular > Mobile/Cellular Data: ON

  • Help! I updated Firefox to version 20.0 on my Imac and now Personnas is not working. What is wrong? What can I do to fix it?

    With the new version 20.0 Personnas is not working, how can I get Personnas to work?

    Whether particular persona or all the persona themes.
    Remove and reinstall the persona
    In order to switch to another persona that you had previously installed, do the following:
    #Go to ''Tools'' and click ''Add-ons'' (or click the Firefox button at the top left and click ''Add-ons'').
    #Switch to the ''Appearance'' tab. You should find your previously used personas in the list.
    #Find the one you want to use and click the ''Enable'' button.
    To uninstall the other ones you can click the ''Remove'' button on them and they'll be uninstalled instantly.

  • WRT54GS Version 5. Firmware 1.50.9 Apple Computers do not work

    Can anyone tell me how to downgrade the firmware in my router. The newest version of the firmware does not work with Apple computers, it works with my windows computers. Apparently this is a known problem with this firmware upgrade.

    Unfortunately, the new firmware is only for the WRT54G. You'll find a solution for the WRT54GS here (the short version):
    http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&message.id=16882#M16882
    including a source for firmware version 1.50.8 which is what you need for the WRT54GS
    If you want the long version, you'll find it here:
    http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&message.id=10007

  • PCL4 TABLE LOG FOR INFOTYPE 2001 IS NOT WORKING IN QUA 070 CLIENT

    Heloo,
    Could some one let me know the ways to capture the log of infotype 2001.
    I have used PCL4 table to capture all the changes made to INFTY 2001.
    This is working fine in DEV 070.
    But not working in QUA 070.
    Could someone let me know what is the problem and the solution.
    Thanks a lot for your efforts.

    Hi Lata!
    I created the absences (T554S):
    Ps grouping, Absence type text
    04,0100 VACATION WORKIN DAYS (quota working fine)
    34,0100 VACATION NATURAL DAYS
    When I check your steps I have this information
    1. Absence type screen no. should be 2001.
    I have checked in table T554S.
    Screen number quota working fine: 2001
    Screen number quota working bad: 2001
    2. Quota deduction should be selected in V_554S_Q table
    Check quota deduction quota working fine: is checked
    Check quota deduction quota working bad: is checked
    3. Check that in counting rule you have assigned correct deduction rule.
    Counting rule for quota working fine: is 010
    Counting rule for quota working bad: is 030
    The counting rule 030 is created for me, maybe this is the problem is a similar copy of the rule 010. It has different conditions because in Psgroup "04" the vacations are working days but in group "34" the vacations are natural days.
    4. In deduction rule check whether correct quota no. you have maintained.
    In deduction rule working fine the absence quota type is 10, standar leave, days
    In deduction rule working bad the absence quota type is 30,                        ,days
    I've checked the absence quota type and are similars:
    In 10 absence quota type
    ESG Time quota types: 1
    PS Grpg tm Quota Typ: 01
    Absence quota type: 10
    Time/measurement unit: Days
    Time constraint class: 02
    In 30 absence quota type:
    ESG Time quota types: 3
    PS Grpg tm Quota Typ: 02
    Absence quota type: 30
    Time/measurement unit: Days
    Time constraint class: 02
    What's wrong?
    Kind regards,
    Julian

Maybe you are looking for