IChatAgent using 60-70% of CPU
For anyone whom might read this, my machine has had a consistent problem for the months with the iChatAgent process.
Unlike many, many other posts on this forum I am not getting the 'not responding' error. This process is eating my cpu time for lunch. With iChat open the computer is almost unusable with anything more than a browser open.
Machine is fully patched, with the exception that I am still running XCode 1.5 if thats any help.
HI Jeffery,
I would reinstall iChat and the support folders
http://discussions.apple.com/thread.jspa?threadID=121719
I would install all three parts.
11:57 AM Monday; May 29, 2006
Similar Messages
-
Firefox is a very busy piece of software. It's using large amounts of CPU time and disk access. It puts my usage at low priority, so I have to wait for some time to be able to use my pointer or keyboard. I don't know what it uses all that CPU and disk access time for, but it's of no use to me. It often takes off with massive use of resources when I'm not doing anything, and I may not have use of my pointer for several minutes. How can I shut down most of this so I can use the browser to get my work done. I just want to use the web site access part of the software, and drop all the extra. I don't want Firefox to be able to recover after a crash. I just want to browse with a minimum of interference from Firefox. I would think that this is the most commonly asked question.
Firefox consumes a lot of CPU resources
* https://support.mozilla.com/en-US/kb/Firefox%20consumes%20a%20lot%20of%20CPU%20resources
High memory usage
* https://support.mozilla.com/en-US/kb/High%20memory%20usage
Check and tell if its working. -
This behavior became apparent after the last couple of Firefox version updates. Current Firefox version is 21.0. My PC is an IBM ThinkCentre running @ 3.0 Ghz Intel CPU with 1.5 Gigs PC3200 DDR ram. With or without any other Windows apps open, whether I'm on line just idling on my home page (Google) or any other web page or entering / receiving data, several minutes into a session, the MS XP pro SP3 task manager shows Firefox cyclically using 50% (and more) CPU resources for 8-10 seconds then 1-5% CPU resources for 1-2 seconds. Closing & restarting Firefox, allows me a few minutes of speedy surfing. My ISP is AT&T 2nd tier DSL with a download thruput of 300 (+) MB (not Mb) / second (altho, most of the time I'm just viewing a web page or idling, without downloading or uploading any data).
What has changed? My PC & all of its software have remained the same with the exception of MS security updates, Adobe Reader updates, & Firefox updates (without adding any additional plug ins, add ons, etc., with each update).
What the...! For the past several minutes that I've been inputting data here, the task manager showed a jump of only 13% cpu usage (ever so briefly) by Firefox & only then when I switched between the task manager & Firefox. Intermittent anomalies are gonna be the death of me...
Well, this is an annoyance, albeit an intermittent one. Ah, I pine for the days when I heard about & believed in "seamless integration"...any thots that might help resolve this issue sure would be appreciated.Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you. -
Premiere cc & media encoder update and it doesn't use anymore 100% of cpu,why?
hi
i don't like always to update programs
but yesterday i update premiere to version 7.2.2 and adobe media encoder and others , in short i updated everything
well i started to render a video and i noticed that adobe media encoder (during the rendering) did not use all my cpu
in the prev , i used the 90% of my cpu
my cpu it's the last intel 4 core (8 vitual) 4Ghz
but the new verstion uses not more then 50% , don't know how much gpu does it use , can't find a program to monitor under w8.1 pro 64bit
what's wrong?
is there a way (option) to let media encoder to use all my 100% cpu?
is there a way to check how much gpu does it use?
thanksHi Thomas,
Thanks for your reply.
It doesn't appear to be the problem though. The encode I have running at the moment has been going for the last 13 hours and in the last two hasn't once got any further along!
Current elapsed time for a 30 minute film going to MPG2 is 13 hours and 18 minutes! Seems a touch excessive for just muxing!
Any other ideas? Would be really grateful for any advice as Adobe Media Encoder is becoming very unreliable and I have tonnes of encoding to do!
Many thanks -
I've tried restarting my computer, the I tried uninstalling and reinstalling, then uninstalling, erasing all firefox files and folders, then restarting and reinstalling. I've also tried opening the profile manager to change my profile. After reinstalling a few times and trying to open the profile manager before launching firef0x, I got the firefox has crashed window and the process in the task manager is still using 50% of my cpu. The most recent expunge then re-download pops up a "file is corrupt" error and won't even install the program.
Kill those processes that you are seeing, including any plugincontainer.exe, only once firefox has stopped running should you try to update it.
Totally unexpected instances of firefox running may sometimes be the result of malware activity. -
Export - use 100% of the CPU
I have a problem do export images and sounds with the
captivate.... When i use the projetc, this is use 100% of de CPU,
somebody have any idea how can I change this???? if it´s
possible....
[]'sIf you don't get an answer here, and if you know Japanese well, you may want to search/ask in the Japanese forums:
https://discussionsjapan.apple.com -
Firefox use 100% of one CPU (Mac)
I use last firefox (32) on MacOS X 10.6.8.
Sometime firefox start using 100% a one CPU, from that time the only way to stop it was to quit (it take severals seconds, sometime it hang). When it start i can close all windows, firefox continue using 100% CPU.
I follow standard instructions (update to lastest, disable plugins and extensions...) it do not work.
I not a configuration to reproduce the problem : keep iCloud mail open in one tab is the way to reproduce the problem sometime after a few minutes, sometime after some hours : but it also happend sometime with no iCloud open...
Paramètres de base de l'application
Nom: Firefox
Version: 32.0.3
Agent utilisateur: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.6; rv:32.0) Gecko/20100101 Firefox/32.0
Rapports de plantage des 3 derniers jours
Tous les rapports de plantage
Extensions
Nom: Firebug
Version: 2.0.4
Activée: true
ID: [email protected]
Nom: Adblock Plus
Version: 2.6.5
Activée: false
ID: {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
Nom: Copy Plain Text 2
Version: 1.3.2
Activée: false
ID: [email protected]
Nom: DuckDuckGo Plus
Version: 0.4.2
Activée: false
ID: jid1-ZAdIEUB7XOzOJw@jetpack
Nom: Lightbeam
Version: 1.0.10.2
Activée: false
ID: jid1-F9UJ2thwoAm5gQ@jetpack
Nom: Readability
Version: 2.4
Activée: false
ID: {6005d9b1-d115-485a-a92a-3f6453ca3fe2}
Accélération graphique
Fenêtres avec accélération graphique: 1/1 OpenGL (OMTC)
ID du périphérique: 0x9583
ID du vendeur: 0x1002
Rendu WebGL: ATI Technologies Inc. -- ATI Radeon HD 2600 PRO OpenGL Engine
windowLayerManagerRemote: true
AzureCanvasBackend: quartz
AzureContentBackend: quartz
AzureFallbackCanvasBackend: none
AzureSkiaAccelerated: 0
Préférences modifiées importantes
accessibility.typeaheadfind.flashBar: 0
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size_cached_value: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.frecency_experiment: 3
browser.history_expire_days.mirror: 180
browser.places.importBookmarksHTML: false
browser.places.smartBookmarksVersion: 7
browser.search.useDBForOrder: true
browser.sessionstore.upgradeBackup.latestBuildID: 20140923175406
browser.startup.homepage: about:newtab|http://www.charentelibre.fr/charente/pays-de-cognac/|http://www.sudouest.fr/charente/cognac/|https://www.ic
browser.startup.homepage_override.buildID: 20140923175406
browser.startup.homepage_override.mstone: 32.0.3
dom.mozApps.used: true
dom.w3c_touch_events.expose: false
extensions.lastAppVersion: 32.0.3
font.internaluseonly.changed: false
font.size.fixed.x-western: 12
font.size.variable.x-western: 14
gfx.blacklist.direct2d: 3
gfx.blacklist.layers.direct3d9: 3
gfx.blacklist.webgl.msaa: 4
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1414486056
places.history.expiration.transient_current_max_pages: 104858
places.last_vacuum: 1341938581
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
plugin.state.adobepdfviewernpapi: 0
plugin.state.divxbrowserplugin: 0
plugin.state.flash: 1
plugin.state.flip4mac wmv plugin: 0
plugin.state.google earth web plug-in: 1
plugin.state.iphotophotocast: 1
plugin.state.silverlight: 0
print.macosx.pagesetup-2: PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0iVVRGLTgiPz4KPCFET0NUWVBFIHBsaXN0IFBVQkxJQyAiLS8vQXBwbGUvL0RURCBQTElTVCAxLjAvL0VO
print.print_bgcolor: false
print.print_bgimages: false
print.print_colorspace:
print.print_command:
print.print_downloadfonts: true
print.print_duplex: 0
print.print_evenpages: true
print.print_in_color: true
print.print_margin_bottom: 0.5
print.print_margin_left: 0.5
print.print_margin_right: 0.5
print.print_margin_top: 0.5
print.print_oddpages: true
print.print_orientation: 0
print.print_page_delay: 50
print.print_pagedelay: 500
print.print_paper_data: 0
print.print_paper_height: 11.00
print.print_paper_name:
print.print_paper_size: 0
print.print_paper_size_type: 1
print.print_paper_size_unit: 0
print.print_paper_width: 8.50
print.print_plex_name:
print.print_printer:
print.print_resolution: 0
print.print_resolution_name:
print.print_reversed: false
print.print_scaling: 1.00
print.print_shrink_to_fit: true
print.print_to_file: false
print.print_unwriteable_margin_bottom: 17
print.print_unwriteable_margin_left: 19
print.print_unwriteable_margin_right: 18
print.print_unwriteable_margin_top: 17
privacy.donottrackheader.enabled: true
privacy.sanitize.migrateFx3Prefs: true
security.warn_viewing_mixed: false
storage.vacuum.last.index: 1
storage.vacuum.last.places.sqlite: 1413879484
JavaScript
Ramasse-miettes incrémentiel: true
Accessibilité
Activée: false
Empêcher l'accessibilité: 0
Versions des bibliothèques
NSPR
Version minimale attendue: 4.10.6
Version utilisée: 4.10.6
NSS
Version minimale attendue: 3.16.5 Basic ECC
Version utilisée: 3.16.5 Basic ECC
NSSSMIME
Version minimale attendue: 3.16.5 Basic ECC
Version utilisée: 3.16.5 Basic ECC
NSSSSL
Version minimale attendue: 3.16.5 Basic ECC
Version utilisée: 3.16.5 Basic ECC
NSSUTIL
Version minimale attendue: 3.16.5
Version utilisée: 3.16.5
Fonctionnalités expérimentales
------------------------------It doesn't help, has i said : i allready do standard procédure to help (what you point) : update to lastest, disable extension or theme (i do not use), disable plug-ins... nothing helps, the bug is still there.
-
Updated I Web on Leopard - now uses 80-90% of CPU power!
Hi,
I manage several websites using Iweb every day. I just updated ("small bug fixes"), and now it's worse than ever, using 80-90% of CPU in my Activity Monitor without even doing anything in the program, just opening it and letting it sit for a second.
I do have an older Macbook - I have 2 GHz Intel Core Duo and 2GB Ram - but I've been running several applications simultaneously including Iweb with no issues.
Can I downgrade to the old version? Can Apple warn me when an upgrade may not be compatible with my system?
Thank you,
JDWhat version of iWeb are you running? What level of Leopard are you at? After updating did you repair disk permissions with Disk Uitlitiy?
Try the following:
delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home()/Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
launch iWeb and try again.
OT -
System Uses 80-90% of cpu on Original Macbook air
I am looking for a solution that reduces the system from using 80% of my cpu. I am getting frustrated
If you are using Mac OS X Lion then I'd suggest to downgrade to Snow Leopard.
Lion is more resource hungry than Snow Leopard, this makes the CPU heat up more.
If the CPU heats up the computer throtles it down to a lower speed for it to cool down. When this happens you'll see your CPU usage go up too, to keep it as simple as I can: imagine you are using 50% capacity at 1.86ghz and the computer throtles down to 0.93ghz, with half the processing speed the laptop would need double the usage to run the same app at the same speed, so it would use 100%. It can even go over 100% if you push it enough.
Sometimes the system will report that it's using 80 or 90% to prevent other apps from stressing the processor and heating it up even further or it will even shut down one of it's cores, a common issue on early 2008 models.
I have a 2009 2.13ghz Macbook Air and after having some performance issues with Lion I reinstalled Snow Leopard, my mac runs much cooler with it and my battery life is one hour longer since it's less stressful on the processor and memory.
You should also google around Coolbook for Snow Leopard, it brings the temperature down and therefore the laptop can run more time at full tilt before it slows the processor down, meaning better performance.
Just my two cents. -
How can I get ITunes to stop using 100% of my CPU system resources
When ITunes is up, it uses 100% of my CPU resources, making everything else operate at a snail's pace. I'm not even doing anything with ITunes, but it still seems to hog my machine, a desktop computer running WIndows XP. (When Itunes is closed CPU usage goes down to 4%-25% or thereabouts on average.)
What can I do to stop this? It is very frustrating that Apple would make a program that does this without reason.
DavidClose your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if CPU issue is resolved..
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Seems Firefox is suddenly using a lot of CPU power
My desktop, recently, started sounding like it was really laboring while I wander around the net. And there's a delay as I type messages like this... the letters show up a second or two behind the keystrokes.
I looked at CPU usage (Win XP with all updates) and while I'm doing this, it sometimes peaks to 35% or higher for Firefox.exe.
My laptop has recently started telling me Firefox is using a lot of memory and I should close and restart Firefox. (Also updated Win XP)
It's becoming a big PITA...It didn't show up when i searched for the problem on Google and it didn't show up when i search here on Firefox's support site either.
And the reason it didn't because it's mostly not about my problem.
'''If' it was one of those things then i would have a high CPU usage the minute i opened my browser, but i don't.'''
'''It will use a lot of CPU power (after a couple of hours) even if i don't do anything '''
And yes hardware acceleration is on and so is submit performance data and i use Ad Block Plus, and there isn't a correctly working theme or add-on out there that could use 50-60% of a 3.2GHz quad core CPU
I don't think this is something that can be fixed that easily -
Hello
In my application I have a general scroll that contains a lot of tables and tabs.
The scroll is working slow and is using a lot of CPU power.
Table scrolls are working fine.
Could be something wrong in the code?
Thank youOf course there could be something wrong in your code. Can you post an SSCCE that reproduces this behaviour?
-
Is Photos using a lot of CPU?
Photos is now using a lot of CPU. This is after it converted my iPhoto library. Is this normal? Is anyone else seeing this on their machine? Here's a screen shot with
Photos hidden (not actively being used).It's probably still building the library and optimizing. Mine is still way up there as well. I'm going to let it run over night and see where it's at in the morning.
-
Ditto Using A Lot Of CPU? Fans Run Often
It seems to be the culprit in causing the fans to run fast since installing SL. I stop the process from the Activity Monitor but it starts back. AM shows ditto at 90% when it's running. The fans come on, I stop ditto and they slow down, later the fans come on again, I check and ditto is running again and at 90%...............
Actually resolved this. Related to unzip issue.
Attempting to unzip some files locks up the Archive Utility. Force Quitting the Archive Utility leaves ditto open and using a lot of CPU.
Therefore, I'm using The Unarchiver (as kindly suggested by someone on my unzip problem post) at least until Apple updates the Archive Utility. -
ITunes Using Up 100% of CPU
For some reason iTunes was using 100% of my CPU, for some reason I thought the iTunes library may have been corrupt, making iTuunes use 100% of my CPU when I started it. So I deleted my .itl file and imported all of my music again, so now all my songs are in iTunes and it seemed to work. Then, as part of my settings, I turned on the souncd check, now iTunes uses 100% of my CPU and doesn't respond when I open it, how can I fix this?
Sorry. I did a search, and a lot of threads came up. The one I chose, I thought, explained WHY it happened.
Maybe you'd get answers more helpful to you, if you went throught the search results.
Sorry I wasn't of any assistance.
Maybe you are looking for
-
Root/Totals item in FS Item hierarchy - not flipping properly
Hi all, can you point me towards a solution? I think I am missing something: in the hierarchy, but default the <b>Root/Totals Item</b> appears above the rest of the nodes. I need to display it on the bottom. I've gone to the DW Workbench and looked
-
Hi, I have just bought an 8510p on auction and wanmt to upgrade the HDD from 120GB to 750GB. Can nyone tell me if the 8510p can deal with a HDD that size? If it can't what is the maximum size that can be installed? Many thanks Cameron This question w
-
Hi Experts, Im wirting a BDC for MM02. There is a problem that the number of views maintained in Materials Master are not same. So in recording, the view marked for selection does not correspond to the view when opening MM02 for some material. Please
-
BSOD Windows 8.1 - ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
Since the installation of the Windows 8.1 update to Windows Server 2012 Essentials the BSOD has rendered the computer useless. This appears to be with the disk adapter drivers and has occurred on at least 2 different HBAs. The errors are always of AT
-
Hi all, I have a t510i with Windows 7 x64, when ussing the webcam with Skype or MS or Webex I allways got a lot of green lines on the preview screen. Mi video driver is: 8.17.12.5738 Integrated Camm driver: 1.1.0.19