ICI Adapter Test Tooling

Hello,
As a supplier of contact/call centers I am working on an integration with SAP ICI Connector, based on 3.06. I am looking for a test tool that behaves like a ICI Server, sending messages to my connector, that will dispatch them to my callcenter and of course the other way around.
Does such a tool exist?
Kind regards,
Frederik Moquette
NEC Unified Solutions
The Netherlands

Hi Frederik,
Best solution to test your connector is to set-up a basic Interaction Center on a SAP CRM server, and to customize it so that it communicates with your connector. There is plenty of documentation on this forum about how to achieve this.
Additionally, SAP delivers a test tool to simulate Interaction Center activity; but you still need to have access to a SAP CRM server to start it. I have already played around with that tool in the past, but do not know much about it; maybe it can still help you.
You can find that test tool with SAP transaction SE80, BSP application: CRM_ICI_TST_CAT.
- change test parameters according to your needs: very important: specify correct Contact Center ID; save parameters.
- in "Test cases" frame, check flag "with trace"
- select a test case, e.g. "7.1. Log on and log off user".
- press "Start test run": traffic with your connector is displayed in lower frame part.
Hope this can help you
Kind regards
Walter

Similar Messages

Help on JDE Adapter - JCA test tool

Hi All,
Please see the following request and response I get from JDE 8.9 using the JCA test tool for JDE Adapter.
<jdeRequest type="callmethod" user="JDE" pwd="Gr@66er!" environment="DL9" session="" sessionidle="">
<callMethod name="F42UI05EditLine" app="" runOnError="" trans="">
<params>
<param name="mnOrderNumber">1002528</param>
<param name="szOrderType">S1</param>
<param name="szOrderCompany">01200</param>
<param name="mnLineNumber">1</param>
<param name="szBranchPlant">1210</param>
<param name="szLocation">STORE</param>
<param name="szLot">615075</param>
<param name="mnEnteredShipQuantity">1</param>
<param name="szEnteredLineType">S</param>
<param name="szVersion">DSI591040</param>
</params>
</callMethod>
</jdeRequest>
<jdeResponse user="JDE" sessionidle="" type="callmethod" session="1712.1172245062.50" environment="DL9" role="">
<callMethod app="XMLInterop" trans="" name="F42UI05EditLine" runOnError="">
<returnCode code="0"/>
<params>
<cErrorConditions>2</cErrorConditions>
<cRecordWritten>1</cRecordWritten>
<mnJobnumberA>26289</mnJobnumberA>
<szVersion>ZJDE0001</szVersion>
<cShipAscendingDateFlag>0</cShipAscendingDateFlag>
</params>
<errors>
<error code="4150" name="szEnteredLineType">Error: Invalid Line Type</error>
<error code="0425" name="szOrderType">Error: Status Flow Not Set Up</error>
</errors>
</callMethod>
</jdeResponse>
Even if I specify szVersion as DSI591040, it seems JDE takes the default version 'ZJDE0001' (see the jdeResponse).
I awlays get the same error message and error code.
Any help on this will be greatly appreicated.
Thanks,
Praveen

Hi Rao,
Exactly where did you specify the physical value for your logical directory?
It seems to me that you may have specified the physical value in the directory field in the File Adapter wizard.
The logical directory name ends up as attribute LogicalDirectory on the jca:operation in the WSDL of the service that you put together using the adapter.
Section "Specifying Inbound Physical or Logical Directory Paths in Oracle Enterprise Service Bus" of the SOA Suite Adapters guide states the way JDeveloper should now support naming of the physical directory. But JDev in this case does not behave "by the book".
Maybe someone from ESB product management can assist on this?
Cheers, Sjoerd

Where can i fing HTTP test tool/ client http adapter?

Hi,
Where can I find http test tool/ http adapter client tool? So that I can sedn messages to XI. Appreciate for your response.
Thanks,
Mallikarjun.M

Hi,
In XI You can go to RWB (from XI server homepage)->Comp Monitoring -> Display All ->Int Server-> Int Engine
In the bottom, you find 3 tabs, select the test message tab to post messages.
Pls note that, when you need to test, you should have created the scenario in IR/ID (and u can use the details of Recr Determination ID) to fill in the details.
As Chandra Mentioned you can use Stephan's code.
Hope this helps
Regards
Agasthuri Doss

AS2 Sender Adapter test

Hi Experts,
I am working on a 856 AS2 to file scenario. I have followed the links EDI to 850 and a few blogs as well.
I have configured the scenario as following:
IR
Message mapping and Interface mapping have been created for 856 to file and 997 to 997 EDI.
ID (party used .. (BC_CUST, sender) and (BC_XI, receiver ))
2 Sender Comm. Channel - for 856 (Send_856, type AS2) and 997 (Split_997, type Split997)
2 Receiver Comm. Channel - file receiver and (AS2 receiver for 997)
2 Receiver determination -
----Sender... || Interface ..... || Receiver ||
BC_CUST || A_856.......... || BC_XI ....|| (for 856)
BC_CUST || A_997 ..........|| BC_XI ....|| (for 997 ... * Is the sender correct * or it should be BC_XI ... )
2 Interface determination
2 Sender Aggrements
----Sender... || Interface ..... || Sender CC ||
BC_CUST || A_856........ || Split_997 (as defined above) * Is this correct * or it should be Send_856 ...
BC_CUST || A_997 ........|| Send_856 (as defined above)
2 Receiver Aggrement
Sender... || Interface ..... || Receiver CC || Receiver **
BC_CUST || A_856........ || file receiver ..|| BC_XI
BC_CUST || A_997 ........|| AS2_997 ......|| BC_XI
Please check and confirm that this config is correct or not, As we are getting an '500 internal erroru2019 when customer is sending 856 data.
Is ther any test tool available for AS2 adapter?
Regards,
Sachin Dhingra

Hi Shabarish,
Thank you for prompt reply..
I tried that, but i am not able to locate the right one, novice to Seeburber.. Please provide the link for right one and also please check the confg once...
Regards,
Sachin Dhingra

Is it possible to use external testing tools in SAP XI

Hi,
I have been working on file to file transfer of large size more than 1 GB. I have many doubts like:
1.Can I use Data compression techniques so that my files can be processsed(my scenario involves a lot of mapping)
2.Can any of the engines be stopped so that processing speed increases.
3.Can any of the third party testing tools like Load runner be used in to monitor the process.
Please help me with sloutions.
Thanks in advance.

One GB is a very huge file. First of all check ur XI hardware configuration.
1. U may write ur adapter module to zip the message.
2. It wont affect the performance much if the file size is 1 GB. Also u cant stop adapter engine (File Adapter) and the Integration Engine in ur scenario
3. U can do the load testing on XI using load runner
Regards,
Prateek

ICI adapter development (IC Web Client)

Hello, all
We are developing ICI adapter(like Genesys Gplus)
using ICI Interface Specification and
two wsdl files(IciSystem-3.10.wsdl and IciUser-3.10.wsdl).
But method getWorkcenterCapability does not run.
Other method not related Free seating are
running correctly.
We think wsdl files we got are old version.
Do you know how to get new wsdl file?
Thanks,
Ryousuke Miyazaki

Hello friends,
we have installed gplus adapter for sap-erp integration. Can some one please let me know how to configure a connection between sap application server and an Adapter.
We got stuck in creating a SAPphone server on sap. In transaction SM59 while creating a new TCP/ip connection RFC destination, we need to set the RFC destination name and program id .
what should be the value for program id? Do we need to code a RFC for this ? cos be gave the program id as SPS.PROG as mentioned in the gplus deployment guide, but the connection test failed.
Can someone please help me in fixing this.
Just one more, how to obtain SAP RFC SDK binary files? Shd these binary files need to be placed in the gplus working directory? Does the tcp/IP connection failed due to missing binary files?
Thanks in Advance. please reply me on [email protected]

I am looking for a load testing tool for my flex application

I am looking for a load testing tool for my flex application having a limited budghet of 1000-1500$. I have gone through NEOLoad,WebUiLoad all are very expensive.

Do you have iPad 1 or 2?
You can connect iPad 1 via a VGA adapter to any projector with a VGA input (all projectors have this).
You can connect iPad 2 via VGA or HDMI.
I like Epson or Sony for projectors.

Forms and Reports: Automated Test tools - functionality AND performance

All,
I'm looking to get a few leads on an automated test tools that may be used to validate Oracle forms and reports (see my software configuration below). I'm looking for tools that can automate both functional tests and performance. By this I mean;
Functional Testing:
* Use of shortcut keys
* Navigation between fields
* Screen organisation (filed locations)
* Exercise forms validation (bad input values)
* Provide values to forms and simulate user commit, and go and verify database state is as expected
Performance Testing:
* carry out tests for fixed user load
* carry out tests for scaled step increase in user load
* automated collection of log files and metrics during test
So far I have:
http://www.neotys.com/
Thanks in advance for your response.
Mathew Butler
Configuration:
Red Hat Enterprise Linux x86-64 architecture v4.5 64 bit
Oracle Application Server 10.1.2.0.2 ( with patch 10.1.2.3 )
Oracle Developer Suite (Oracle Forms and Reports) V10.1.2.0.2 ( with patch 10.1.2.3 )
Oracle JInitiator 1.3.1.17 or later
Microsoft Internet Explorer 6

are there any tools for doing this activity like oracle recommended tools?
Your question is unclear. As IK mentioned, the only tool you need is a new version of Oracle Forms/Reports. Open your v10 modules in a v11 Builder and select Save. You now have a v11 module. Doing a "Compile All PL/SQL" before saving is a good idea, but not required. The Builders and utilites provided with the version 11 installation are the only supported tools for upgrading your application. If you are trying to do the conversion of many Forms files in a scripted manner, you can use the Forms compiler in a script. Generating new "X" files will also update the source modules (fmb, mmb, pll). See MyOracleSupport Note 955143.1
Also included in the installation in the Forms Migration Assistant. Although it is more useful to people coming from older versions, it can also be used to move from v10 to 11. It allows you to select more than one file at a time. Documentation for this utility can be found in the Forms Upgrade Guide.
Using the Oracle Forms Migration Assistant

What are the IEDriver version requirements for using Microsoft Webdriver tool with a selenium based test tool?

Hi,
We are using IEDriver 2.44.0 with microsoft webdriver tool Windows7-KB2990999-x64.msu update with IE11.
Using IMPLEMENTATION=VENDOR, we are not able to get this IEDriver version working with out selenium based test tool, with or without microsoft webdriver tool.
I can see the driver IMPLEMENTATION set to VENDOR in the log, it also brings up the browser, but gets stuck there.Is this a known issue?ThanksTanvi

Selenium is a third party software, so it is not supported in MSDN forum. It would be better consult to selenium's office website or forum. Some placa like here:
http://www.seleniumhq.org/support/
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Are there any good black box testing tools for j2me?

Is there any good testing tools available for testing software on physical mobile devices?
I would like to partially replace manual testing with automated testing using a test tool. It should work on physical devices, and with the help of a script it should be possible to execute predefined sequences of button pressings on the device. Preferably there should also be some way of deciding whether the test was a succes without having to do so entirely manually.
The purpose with this would be to make it easier to go through the test protocols, which has to be done before every new software release.
Deviceanywhere.com looks promising at first glance but it is rather costly. Still, does anyone have an opinion of it?
Does anyone has experience of Mobile junit for this kind of testing? Is it possible to define series of physical button pressings with it? At first glance it doesn't seem so.

You can collect the Organizational Health in Exchange 2010 console for Exchange 2003/2007/2010 and that will list very useful information about statistics in your organization like servers, databases, CALs, recipient, feature used etc...
Collect Organizational Health Data -
http://technet.microsoft.com/en-us/library/dd351156%28v=exchg.141%29.aspx
However it doesn't contain any configuration information and that you need to collect it manually because that depends on needs of each organization and how they want to setup their infrastructure...

HTTP to File Scenario: execute Test Tool (html) but any received message?

Hi all,
I have configured the HTTP to File scenario in SAP XI 7.0. When i execute the Test Tool (HTTP_Client_Adapter.html), i don't see any message in the XI Server. I don't know the Test Tool which i used for the test work correctly, because when i clicked on 'Send' button, i don't get any message in the XI Server?
The Configuration Scenario is OK when executing the Configuration Test in ID.
Could you please tell me how i can know the Test Tool is execute correctly?
The Test Tool which i used in the link below:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/66dadc6e-0a01-0010-9ea9-bb6d8ca48cc8
Thanks a lot in advance,
Vinh Vo

HI,
In XI You can go to RWB (from XI server homepage)->Comp Monitoring -> Display All ->Int Server-> Int Engine
In the bottom, you find 3 tabs, select the test message tab to post messages.
Pls note that, when you need to test, you should have created the scenario in IR/ID (and u can use the details of Receiver Determination ID) to fill in the details.
You can refer this:
/message/266750#266750 [original link is broken]

Test scripts for oracle applications using qtp testing tool

hi
i want some test scripts for oracle applications using qtp testing tool
regards

You will need to create separate scripts for Load testing. The functional scripts cannot be used in OLT. The exceptions to this would be the "General" items (Java Code Script & Web Services) which can also be used in OLT.
e.g. Instead of selecting "Functional Testing - Oracle EBS/Forms"
select "Load Testing (Protocol Automation) - Oracle EBS/Forms"
Once you get into load testing you'll realise that you want to create very specific scripts and won't want to try re-using functional scripts. I know a lot of such tools are 'sold' on the fact that functional scripts can be re-used for load, but when it comes down to it you'll want to design your load scripts seperately anyway!

Getting TF42008: The test case management package could not be loaded. Verify that Visual Studio Test Tool is installed and try again.

We are trying to run unit tests in TFS server.
Below is the System Configuration:
Visual studio version: VS 2013 Ultimate
TFS: TFS 2013
For this we have created a build and able to run the build successfully. And build page showing one link for Test result. When we click on this link, we got below error message.
"Getting TF42008: The test case management package could not be loaded. Verify that Visual Studio Test Tool is installed and try again."
And below is the screenshot of the error message. So please let us know is there and thing else we need to do to solve this issue?

Hi RS,
Thanks for your reply.
Yes, if you want to open and view test result on your laptop, you need install the VS 2013 on your laptop as well.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Stress test tool for EBS

Hi Hsawwan, other EBS APPS dba's!
We are trying to predict some performance according future load on EBS. This is classic stress test techniques. We want to automate stress on APPS side and run some requests and forms as well....
With "Load runner" we have unsolvable problems....
What can we use for that?
THX,
Damir Vadas

Damir,
With "Load runner" we have unsolvable problems....What do you mean by unsolvable problems?
What can we use for that?You may try OpenSTA.
OpenSTA Users Home Page - Free Web Load and Stress Testing Tool
http://www.opensta.org/
Also, have a look at the following links:
Automated Testing for the E-Business Suite
http://blogs.oracle.com/stevenChan/2006/06/automated_testing_for_the_ebus.html
Breaking Oracle Presentation
http://www.psoug.org/pres/ukoug08_breaking_oracle.pdf

Stress test tool for Developer 6i

Hi!
I'm looking for a stress test tool for a client/server 6i Forms/Reports application.
Any suggestions appreciated!
Br Niklas Danielsson

Mercury Loadrunner should do it.
Check the Web.

ICI Adapter Test Tooling

Similar Messages

Maybe you are looking for