ICloud 30+ hour outage- try failover not FAIL

Apple support just told me they hope "by the WEEKEND" to get iCloud mail back up and running? I think they better call SunGuard and restore from back up! In the amount of time This outage has gone on Tulane payroll was already restored from Hurricane Katrina!
Dear Apple forget your new iPhone spend the development money on back up/restore and support! Oh and word of advice don't back up to "the cloud" environment because that is a FAIL for your company!

    That's not the type of impression we want to make with our 4G LTE service dianefrommd! Where are you located? Are you experiencing any difficulties with other 4G devices in that area? Are there any others in the area with the same equipment experiencing similar difficulties? I'm pleased to hear that a resolution ticket was opened. What were the results? What was the indication given as to why the ticket was closed? We appreciate you reaching out to us via a different support platform. Please be aware that we have the same options for troubleshooting here as we do with our other support channels.
Jonathan_VZW
Please follow us on twitter @VZWSupport

Similar Messages

  • HT4859 my iphone fails to backup to icloud. eack time i try manually it fails after estimating the time.

    I have not been able to back up my iphone to icloud. Each time it fails. Do I need to reset the phone and try?
    Jonathan

    Error -3259 is a network timeout error, usually. This article might help:
    http://support.apple.com/kb/TS2799

  • I have set up icloud tool and I try to log in but it always fail showing error "you can not sign in because of server error", what can I do?

    I have set up icloud tool and I try to log in but it always fail showing error "you can not sign in because of server error", what can I do?

    Hello, Sameh.tolba. 
    Thank you for visiting Apple Support Communities. 
    I would recommend going through the troubleshooting steps in the two articles below when experiencing this issue. 
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/ts4123
    iCloud: Making sure that iCloud works with security software in Windows
    http://support.apple.com/kb/TS4175
    Cheers,
    Jason H. 

  • I'm having problems backing up my iphone 4 to icloud since 13/04/2012. First it says it's going to take about 5 hours, then it says backup failed. Following instructions-connected to wi-fi, plugged into PC

    I'm having problems backing up my iphone 4 to icloud since 13/04/2012. First it says it's going to take 6 hours, then it says backup failed. Following instructions-connected to wi-fi, plugged into PC & locked the phone (though never had any problems like this before), but still no difference. Any ideas/similar problems?

    unfortunately there are tons of people with this issue but Apple has not given any answers for us to fix this issue yet. I wish they would allocate more people to solving these problems when they roll out new versions of itunes along with new hardware.

  • A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?

    Question repeated: A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?
    I want to restore from my june 2012 backup because it contains pictures that i lost when my phone broke in september. if anyone could help that would be awesome. thanks

    Did you tap "Show older backups" on the Choose Backup screen (see image below)?

  • I receive the error "this apple id is valid but not an icloud account" when I try to open icloud on my pc. Help.

    I receive the error "this apple id is valid but not an icloud account" when I try to open icloud on my pc. Help.

    Music purchased from the iTunes Store is automatically available in iCloud.  This is "iTunes in the Cloud" and does not require an iCloud account.  The music is stored in the iTunes Store, not in a personal iCloud account.
    If you don't have any Apple devices you will not be able to create an account.  It wouldn't be any value to you anyway as it syncs data on you computer with your Apple devices. If you don't have any, there is nothing to sync.

  • Kindly advice me, I have iphone 5s and I forgot the log-in password (passcode), I tried to open it but my phone give 60 min. to let me try after I fail for first one. I dont sync. with icloud or itunes. Please I NEED YOUR URGENT HELP!!

    Kindly advice me, I have iphone 5s and I forgot the log-in password (passcode), I tried to open it but my phone give 60 min. to let me try after I fail for the first one. I dont sync. with icloud or itunes. Please I NEED YOUR URGENT HELP!! MY IPHONE IS STILL STUCK.

    I can't, look at this image

  • I uploaded an rtf (word) document to icloud, but when I try to open in Pages, I get a message that it does not support rtf format. What is going on?

    I uploaded an rtf (word) document to icloud, but when I try to open in Pages, I get a message that it does not support rtf format. What is going on?

    Supported file formats for iOS Pages
    Import:
    Pages ’09 for Mac
    Microsoft Word - Office Open XML (.docx) and Office 97 or later (.doc)
    Plain Text files (.txt)
    Export:
    Pages ’09 for Mac
    Microsoft Word (.doc)
    PDF
    As you can see -  .rtf is not supported.

  • Why do I get 'mobile me' in settings and not icloud? when I try to go into it, it says not responding, try later.

    Hi
    Could anyone help me with this please?
    Why do I get 'mobile me' in settings on my imac and not 'icloud'? when I try to go into it, it says not responding, try later.
    Thanks

    Why do I get 'mobile me' in settings on my imac and not 'icloud'?
    Because your operating system is too old. iCloud was introduced in Mac OS X 10.7.4 and later. You can upgrade through the Mac App Store. The latest version is Mac OS X 10.9.3 and is free if your Mac is capable of running it (late 2007 IMac's and newer).
    when I try to go into it, it says not responding, try later.
    MobileMe was shut down forever a few years ago, that's why it doesn't work any more.

  • I have less than 100 MB left. I try using iCloud, but it seems like its not putting storage away. It says I have all 5 MB left.

    I have less than 100 MB left. I try using iCloud, but it seems like its not putting storage away. It says I have all 5 MB left. Please explain.

    5 GB*

  • When I try to backup to iCloud, I get the message that Verification Failed.  What does that mean?

    When I try to backup to iCloud, I get the message that Verification Failed.  What does that mean?

    Me too

  • HT1212 MY PHONE IS LOCKED MY STEPSON SET UP A ICLOUD ACCOUNT AN NOW HE DOES NOT KNOW THE USERNAME OR PASSWORD AN I HAVE TRIED HOOKING IT UP TO ITUNES AN CAN NOT RESET ANYTHING. WHEN U TURN THE PHONE ON IT SAYS HELLO AN THEN ASK FOR THE STATE AN THE WIRELE

    HEY MY PHONE IS LOCKED AND MY STEPSON STEP UP A ICLOUD ACCOUNT AN KNOW HE DOES NOT KNOW THE ICLOUD USERNAME OR PASSWORD. WHEN I TURN THE PHONE ON IT WILL SAY HELLO AN ASK FOR THE STATE AN THE ASK FOR THE INTERNET PASSWORD. THEN IT ASK FOR THE ICLOUD AN THE PASSWORD AN WE DONT KNOW IT TO GET THE PHONE UNLOCKED. I HAVE TRIED HOOKING IT UP TO ITUNES BUT IT DOES NOTHING JUST GOES BACK TO THE SAME SCREEN. SO CAN U PLEASE HELP ME UNLOCK MY PHONE. IVE BEEN THE THE VERIZON STORE AN THE THE APPLE STORE AN THE SAID THEY CANT UNLOCK IT THAT I HAD TO GO ON AN WEBSITE IFORGOT.APPLE.COM AND EXPRESSLANE.APPLE.COM AN WHEN U PULL IT UP YOU DONT KNOW WHAT TO GO ON BECAUSE THERE IS SOME MANY TO CHOOSE FROM SO IT DOESNT HELP ME AT ALL. ITS LIKE THAT ON BOTH WEBSITES THEY FAIL TO TELL U THAT THERE IS ALOT TO CHOOSE FROM. IF THEY WOULD GIVE YOU THE ONE TO GO TO START WITH U WOULDNT BEEN ON THE COMPUTER FOR HOURS AN HOURS AT A TIME.

    drop the CAPS thats rude.
    iforgot.apple.com there is a link for find my apple id click here
    https://iforgot.apple.com/appleid?language=US-EN&returnURL=https://appleid.apple .com/cgi-bin/WebObjects/MyAppleId.woa&app_id=93&app_type=ext
    Peace, Clyde

  • How many times can I attempt the passcode before I can't enter it any longer...it has been over 3 hours and it will not let me re-enter it?

    How many times can I attempt the passcode before I can't enter it any longer...it has been over 3 hours and it will not let me re-enter it?  My daughter forgot the new code she put in....

    What dowes the screen say? If it just say disable and gives not time to retry then you have to restore the iPod
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • How can I configure ReFS to NOT fail read operations when a checksum error is detected (on non-Storage-Spaces volumes where data integrity streams are enabled)?

    According to William Stanek, in his Windows Server 2012 R2 Inside Out: Configuration, Storage & Essentials book, this is apparently possible: (pg. 615 - here it is on Google Books: https://books.google.ca/books?id=0IyfBAAAQBAJ&pg=PT819&lpg=PT819&dq=read+operation )
        Integrity can be enabled when the system is not running on Storage Spaces. When
        integrity is enabled and ReFS detects a checksum mismatch, ReFS logs an event and
        fails the read operation by default. If you don’t want the read operation to fail, you
        can configure ReFS to continue with the read operation. A related event will be logged
        regardless.
    So then how do I configure it to do that???
    (And just to make it super-clear, I'm NOT using Storage Spaces, so there is no redundancy via mirroring/parity, and I'm not expecting any file repair - just detection of corruption. It's just a basic volume formatted with ReFS and
    with integrity streams enabled, via format E: /fs:ReFS /i:enabled
    For those who want more details, here's the situation: 
    I try to perform a read operation on a file with corrupted data (purposely done for testing using a low-level disk editor), I get a the following error message:
    And an event ID 133 from ReFSv1 gets logged in the System log:
    Clicking "Try Again" just brings up the same message, and clicking "Skip" skips the operation entirely.
    This is indeed the correct default behaviour.
    What I want instead is for the read operation to be allowed to complete, with corrupt data and all, and ONLY for the event to be logged. And according to William Stanek, this is supposed to be configurable somewhere - and after hours of searching, I haven't
    been able to find anything.

    Hi Tommy,
    >>How can I configure ReFS to NOT fail read operations when a checksum error is detected
    We can use PowerShell command Set-FileIntegrity to configure this. The specific parameter for controlling this behavior is
    -Enforce <Boolean>which indicates whether to enable blocking access to a file if integrity streams do not match the data.  
    Regarding this point, the following article can be referred to as reference.
    Set-FileIntegrity
    https://technet.microsoft.com/en-us/library/jj218351.aspx
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • ASA 5520 Not Failing over

        Hi All
    Im preparing a lab and I have 2 ASA 5520's. I have configured them for failover so the Primarys config will replicate over to the Secondary. They are connected via a 3560 switch. the switch ports are configured as access ports on vlan 1. Spanning-tree portfast is enabled
    Firewall (Primary)
    Cisco Adaptive Security Appliance Software Version 9.1(1)
    Device Manager Version 7.1(2)
    Compiled on Wed 28-Nov-12 10:38 by builders
    System image file is "disk0:/asa911-k8.bin"
    Config file at boot was "startup-config"
    DEO-FW-01 up 5 hours 1 min
    failover cluster up 5 hours 1 min
    Hardware:   ASA5520, 2048 MB RAM, CPU Pentium 4 Celeron 2000 MHz,
    Internal ATA Compact Flash, 256MB
    BIOS Flash M50FW080 @ 0xfff00000, 1024KB
    Encryption hardware device : Cisco ASA-55xx on-board accelerator (revision 0x0)
                                 Boot microcode        : CN1000-MC-BOOT-2.00
                                 SSL/IKE microcode     : CNLite-MC-SSLm-PLUS-2.03
                                 IPSec microcode       : CNlite-MC-IPSECm-MAIN-2.08
                                 Number of accelerators: 1
    0: Ext: GigabitEthernet0/0  : address is 001e.f762.bc44, irq 9
    1: Ext: GigabitEthernet0/1  : address is 001e.f762.bc45, irq 9
    2: Ext: GigabitEthernet0/2  : address is 001e.f762.bc46, irq 9
    3: Ext: GigabitEthernet0/3  : address is 001e.f762.bc47, irq 9
    4: Ext: Management0/0       : address is 001e.f762.bc43, irq 11
    5: Int: Not used            : irq 11
    6: Int: Not used            : irq 5
    Licensed features for this platform:
    Maximum Physical Interfaces       : Unlimited      perpetual
    Maximum VLANs                     : 150            perpetual
    Inside Hosts                      : Unlimited      perpetual
    Failover                          : Active/Active  perpetual
    Encryption-DES                    : Enabled        perpetual
    Encryption-3DES-AES               : Enabled        perpetual
    Security Contexts                 : 2              perpetual
    GTP/GPRS                          : Disabled       perpetual
    AnyConnect Premium Peers          : 2              perpetual
    AnyConnect Essentials             : Disabled       perpetual
    Other VPN Peers                   : 750            perpetual
    Total VPN Peers                   : 750            perpetual
    Shared License                    : Disabled       perpetual
    AnyConnect for Mobile             : Disabled       perpetual
    AnyConnect for Cisco VPN Phone    : Disabled       perpetual
    Advanced Endpoint Assessment      : Disabled       perpetual
    UC Phone Proxy Sessions           : 2              perpetual
    Total UC Proxy Sessions           : 2              perpetual
    Botnet Traffic Filter             : Disabled       perpetual
    Intercompany Media Engine         : Disabled       perpetual
    Cluster                           : Disabled       perpetual
    This platform has an ASA 5520 VPN Plus license.
    Here is the failover config
    failover
    failover lan unit primary
    failover lan interface SFO GigabitEthernet0/3
    failover replication http
    failover link SFO GigabitEthernet0/3
    failover interface ip SFO 10.10.16.25 255.255.255.248 standby 10.10.16.26
    Here is the Show failover output
    Failover On
    Failover unit Primary
    Failover LAN Interface: SFO GigabitEthernet0/3 (Failed - No Switchover)
    Unit Poll frequency 1 seconds, holdtime 15 seconds
    Interface Poll frequency 5 seconds, holdtime 25 seconds
    Interface Policy 1
    Monitored Interfaces 3 of 160 maximum
    failover replication http
    Version: Ours 9.1(1), Mate Unknown
    Last Failover at: 12:53:27 UTC Mar 14 2013
            This host: Primary - Active
                    Active time: 18059 (sec)
                    slot 0: ASA5520 hw/sw rev (2.0/9.1(1)) status (Up Sys)
                      Interface inside (10.10.16.1): No Link (Waiting)
                      Interface corporate_network_traffic (10.10.16.21): Unknown (Waiting)
                      Interface outside (193.158.46.130): Unknown (Waiting)
                    slot 1: empty
            Other host: Secondary - Not Detected
                    Active time: 0 (sec)
                      Interface inside (10.10.16.2): Unknown (Waiting)
                      Interface corporate_network_traffic (10.10.16.22): Unknown (Waiting)
                      Interface outside (193.158.46.131): Unknown (Waiting)
    Stateful Failover Logical Update Statistics
            Link : SFO GigabitEthernet0/3 (Failed)
    Here is the output for the secondary firewall
    Cisco Adaptive Security Appliance Software Version 9.1(1)
    Device Manager Version 6.2(5)
    Compiled on Wed 28-Nov-12 10:38 by builders
    System image file is "disk0:/asa911-k8.bin"
    Config file at boot was "startup-config"
    ciscoasa up 1 hour 1 min
    failover cluster up 1 hour 1 min
    Hardware:   ASA5520, 2048 MB RAM, CPU Pentium 4 Celeron 2000 MHz,
    Internal ATA Compact Flash, 256MB
    BIOS Flash M50FW080 @ 0xfff00000, 1024KB
    Encryption hardware device : Cisco ASA-55xx on-board accelerator (revision 0x0)
                                 Boot microcode        : CN1000-MC-BOOT-2.00
                                 SSL/IKE microcode     : CNLite-MC-SSLm-PLUS-2.03
                                 IPSec microcode       : CNlite-MC-IPSECm-MAIN-2.08
                                 Number of accelerators: 1
    0: Ext: GigabitEthernet0/0  : address is 0023.0477.12e4, irq 9
    1: Ext: GigabitEthernet0/1  : address is 0023.0477.12e5, irq 9
    2: Ext: GigabitEthernet0/2  : address is 0023.0477.12e6, irq 9
    3: Ext: GigabitEthernet0/3  : address is 0023.0477.12e7, irq 9
    4: Ext: Management0/0       : address is 0023.0477.12e3, irq 11
    5: Int: Not used            : irq 11
    6: Int: Not used            : irq 5
    Licensed features for this platform:
    Maximum Physical Interfaces       : Unlimited      perpetual
    Maximum VLANs                     : 150            perpetual
    Inside Hosts                      : Unlimited      perpetual
    Failover                          : Active/Active  perpetual
    Encryption-DES                    : Enabled        perpetual
    Encryption-3DES-AES               : Enabled        perpetual
    Security Contexts                 : 2              perpetual
    GTP/GPRS                          : Disabled       perpetual
    AnyConnect Premium Peers          : 2              perpetual
    AnyConnect Essentials             : Disabled       perpetual
    Other VPN Peers                   : 750            perpetual
    Total VPN Peers                   : 750            perpetual
    Shared License                    : Disabled       perpetual
    AnyConnect for Mobile             : Disabled       perpetual
    AnyConnect for Cisco VPN Phone    : Disabled       perpetual
    Advanced Endpoint Assessment      : Disabled       perpetual
    UC Phone Proxy Sessions           : 2              perpetual
    Total UC Proxy Sessions           : 2              perpetual
    Botnet Traffic Filter             : Disabled       perpetual
    Intercompany Media Engine         : Disabled       perpetual
    Cluster                           : Disabled       perpetual
    This platform has an ASA 5520 VPN Plus license.
    Here is the failover config
    failover
    failover lan unit secondary
    failover lan interface SFO GigabitEthernet0/3
    failover replication http
    failover link SFO GigabitEthernet0/3
    failover interface ip SFO 10.10.16.26 255.255.255.248 standby 10.10.16.25
    Here is the Show failover output
    failover
    failover lan unit secondary
    failover lan interface SFO GigabitEthernet0/3
    failover replication http
    failover link SFO GigabitEthernet0/3
    failover interface ip SFO 10.10.16.26 255.255.255.248 standby 10.10.16.25
    Failover On
    Failover unit Secondary
    Failover LAN Interface: SFO GigabitEthernet0/3 (up)
    Unit Poll frequency 1 seconds, holdtime 15 seconds
    Interface Poll frequency 5 seconds, holdtime 25 seconds
    Interface Policy 1
    Monitored Interfaces 0 of 160 maximum
    failover replication http
    Version: Ours 9.1(1), Mate Unknown
    Last Failover at: 12:58:31 UTC Mar 14 2013
    This host: Secondary - Active
    Active time: 3630 (sec)
    slot 0: ASA5520 hw/sw rev (2.0/9.1(1)) status (Up Sys)
    slot 1: empty
    Other host: Primary - Not Detected
    Active time: 0 (sec)
    Stateful Failover Logical Update Statistics
    Link : SFO GigabitEthernet0/3 (up)
    interface g0/3 on both are up via the No shutdown command. However I get the following error No Active mate detected
    please could someone help.
    Many thanks

    Hello James,
    You have configured  the IPs on the interfaces incorrectly.
    Let me point it out
    failover
    failover lan unit primary
    failover lan interface SFO GigabitEthernet0/3
    failover replication http
    failover link SFO GigabitEthernet0/3
    failover interface ip SFO 10.10.16.25 255.255.255.248 standby 10.10.16.26
    You are telling the Primary device use IP address 10.10.16.25 and the secondary firewall will be 10.10.26.26
    Now let's see the configuration on the Secondary Unit?
    failover
    failover lan unit secondary
    failover lan interface SFO GigabitEthernet0/3
    failover replication http
    failover link SFO GigabitEthernet0/3
    failover interface ip SFO 10.10.16.26 255.255.255.248 standby 10.10.16.25
    On the secondary you are saying the primary IP will be 10.10.16.26 and the secondary will be 10.10.16.25
    You have it backwards and based on the output I would say you configured it on all of the interfaces like that
    So please change it and make it the same on all of the interfaces so both devices know the same thing ( which IP they should use when they are primary and secondary, this HAVE to match )
    Hope that I could help
    Julio Carvajal

Maybe you are looking for

  • Many  db  objects error after Upgrate EBS 12.1.1 to EBS 12.1.2(7303033)

    many db objects error after apply patch 7303033 Error db objects APPS.ENGECOBO APPS.OKL_REVERSE_CONTRACT_PVT APPS.OKL_GENERATE_ACCRUALS_PUB APPS.OKL_PROCESS_TMPT_SET_PVT_W APPS.OKL_TRANS_CONTRACTS_PVT_W APPS.OKL_TRANSACTION_PVT_W APPS.OKL_CONTRACT_PV

  • Oracle portal import hangs - no errors

    I was trying to Import a newly developed page group into production environment from development environment. Running Script to Create an Export Dump File - no errors from portal or on backend. Running Script on Target System - No errors. Running imp

  • Regarding sending email with priority

    hi experts, how to send email to multiple email ids with priority

  • Can you convert pdf images to word?

    Do any of Adobe products convert images within a pdf to word - like OCR? I have 700+ pages of a document  that have been scanned as images rather than text. I tried Mac Automator to convert the PDF to Word, but it doesnt handle images. Thanks

  • How can I capture photos from iMovie 11?

    I want to capture a photo from a video clip.  The instructions I've found online do not seem to work with iMovie 11.  Does anyone have a suggestion?